1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.5 2003/08/05 07:45:39 asmodai Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# 18# The CPUTYPE variable controls which processor should be targeted for 19# generated code. This controls processor-specific optimizations in 20# certain code (currently only OpenSSL) as well as modifying the value 21# of CFLAGS to contain the appropriate optimization directive to gcc. 22# The automatic setting of CFLAGS may be overridden using the 23# NO_CPU_CFLAGS variable below. 24# Currently the following CPU types are recognized: 25# Intel x86 architecture: 26# (AMD CPUs) k7 k6-2 k6 k5 27# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 28# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4 29# 30# If you experience any problems after setting this flag, please unset 31# it again before submitting a bug report or attempting to modify code. 32# It may be that certain types of software will become unstable after being 33# compiled with processor-specific (or higher - see below) optimization flags. 34# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 35# 36#CPUTYPE=i686 37#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 38#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 39# 40# CFLAGS controls the compiler settings used when compiling C code. 41# Note that optimization settings above -O (-O2, ...) are not recommended 42# or supported for compiling the world or the kernel - please revert any 43# nonstandard optimization settings to "-O" before submitting bug reports 44# to the developers. 45# Note also that at this time the -O2 setting is known to produce BROKEN 46# CODE on the Alpha platform. 47# 48#CFLAGS= -O -pipe 49# 50# CXXFLAGS controls the compiler settings used when compiling C++ code. 51# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 52# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 53# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 54# 55#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 56# 57# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 58# for use in developing FreeBSD and testing changes. They can be used by 59# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 60# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 61# 62BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 63 -Wcast-qual -Wchar-subscripts -Winline \ 64 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 65 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 66# 67# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 68# 69#WARNS_WERROR= yes 70# 71# To compile just the kernel with special optimizations, you should use 72# this instead of CFLAGS (which is not applicable to kernel builds anyway). 73# There is very little to gain by using higher optimization levels, and doing 74# so can cause problems. 75# 76#COPTFLAGS= -O -pipe 77# 78# Compare before install 79#INSTALL=install -C 80# 81# To enable installing suidperl with the setuid bit turned on 82#ENABLE_SUIDPERL= true 83# 84# To build ppp with normal permissions 85#PPP_NOSUID= true 86# 87# To enable installing ssh(1) with the setuid bit turned on 88#ENABLE_SUID_SSH= true 89# 90# To avoid building various parts of the base system: 91#NO_CVS= true # do not build CVS 92#NO_BIND= true # do not build BIND 93#NO_FORTRAN= true # do not build g77 and related libraries 94#NO_I4B= true # do not build isdn4bsd package 95#NO_IPFILTER= true # do not build IP Filter package 96#NO_LPR= true # do not build lpr and related programs 97#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 98#NO_MODULES= true # do not build modules with the kernel 99#NO_OBJC= true # do not build Objective C support 100#NO_OPENSSH= true # do not build OpenSSH 101#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 102#NO_SENDMAIL= true # do not build sendmail and related programs 103#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 104#NO_TCSH= true # do not build and install /bin/csh (which is tcsh) 105#NO_X= true # do not compile in XWindows support (e.g. doscmd) 106#NOCRYPT= true # do not build any crypto code 107#NOGAMES= true # do not build games (games/ subdir) 108#NOINFO= true # do not make or install info files 109#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 110#NOMAN= true # do not build manual pages 111#NOPERL= true # do not build perl. Disables OpenSSL optimizations 112#NOPROFILE= true # Avoid compiling profiled libraries 113#NOSHARE= true # do not go into the share subdir 114# 115# To build sys/modules when building the world (our old way of doing things) 116#MODULES_WITH_WORLD=true # do not build modules when building kernel 117# 118# The list of modules to build instead of all of them. 119#MODULES_OVERRIDE= linux ipfw 120# 121# The following controls building optional IDEA code in libcrypto and 122# certain ports. Patents are involved - you must not use this unless 123# you either have a license or fall within patent 'fair use' 124# provisions. 125# 126# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 127# 128# IDEA is patented in the USA and many European countries - thought to 129# be OK to use for any non-commercial use. This is optional. 130#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 131# 132# To avoid running MAKEDEV all on /dev during install: 133#NO_MAKEDEV= true 134# 135# If you do not want unformatted manual pages to be compressed 136# when they are installed: 137# 138#NOMANCOMPRESS= true 139# 140# 141# If you want the "compat" shared libraries installed as part of your normal 142# builds, uncomment these: 143# 144#COMPAT1X= yes 145#COMPAT20= yes 146#COMPAT21= yes 147#COMPAT22= yes 148#COMPAT3X= yes 149#COMPAT4X= yes 150# 151# 152# If you do not want additional documentation (some of which are 153# a few hundred KB's) for ports to be installed: 154# 155#NOPORTDOCS= true 156# 157# 158# Default format for system documentation, depends on your printer. 159# Set this to "ascii" for simple printers or screen 160# 161#PRINTERDEVICE= ps 162# 163# 164# How long to wait for a console keypress before booting the default kernel. 165# This value is approximately in milliseconds. Keypresses are accepted by the 166# BIOS before booting from disk, making it possible to give custom boot 167# parameters even when this is set to 0. 168# 169#BOOTWAIT=0 170#BOOTWAIT=30000 171# 172# By default, the system will always use the keyboard/video card as system 173# console. However, the boot blocks may be dynamically configured to use a 174# serial port in addition to or instead of the keyboard/video console. 175# 176# By default we use COM1 as our serial console port *if* we're going to use 177# a serial port as our console at all. Alter as necessary. 178# 179# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 180# 181#BOOT_COMCONSOLE_PORT= 0x3F8 182# 183# The default serial console speed is 9600. Set the speed to a larger value 184# for better interactive response. 185# 186#BOOT_COMCONSOLE_SPEED= 115200 187# 188# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 189# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 190# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 191# still mount the server's '/' (i.e. rather than load the server's kernel). 192# 193#LOADER_TFTP_SUPPORT= YES 194# 195# By default, the ports collection attempts to use XFree86 4.X. If 196# you are running XFree86 3.3.X, uncomment this line. 197# 198#XFREE86_VERSION= 3 199# 200# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 201# If you have a XFree86 from before 3.0 that has the X distribution in 202# /usr/X386, you want to uncomment this. 203# 204#X11BASE= /usr/X386 205# 206# 207# If you have Motif on your system, uncomment this. 208# 209#HAVE_MOTIF= yes 210#MOTIF_STATIC= yes 211# 212# If the default location of the Motif library (specified below) is NOT 213# appropriate for you, uncomment this and change it to the correct value. 214# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 215# 216#MOTIFLIB= -L${X11BASE}/lib -lXm 217# 218# 219# If you're resident in the USA, this will help various ports to determine 220# whether or not they should attempt to comply with the various U.S. 221# export regulations on certain types of software which do not apply to 222# anyone else in the world. 223# 224#USA_RESIDENT= YES 225# 226# 227# Override "don't install a port that's already installed" behavior. 228# One might wish to do this for ports debugging or to unconditionally 229# reinstall a set of suspect/broken ports. 230# 231#FORCE_PKG_REGISTER= YES 232# 233# 234# If you're behind a firewall and need FTP or HTTP proxy services for 235# ports collection fetching to work, the following examples give the 236# necessary syntax. See the fetch(3) man page for details. 237# 238#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21 239#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80 240# 241# 242# Port master sites. 243# 244# If you want your port fetches to go somewhere else than the default 245# (specified below) in case the distfile/patchfile was not found, 246# uncomment this and change it to a location nearest you. (Don't 247# remove the "/${DIST_SUBDIR}/" part.) 248# 249#MASTER_SITE_BACKUP?= \ 250# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 251# 252# If you want your port fetches to check the above site first (before 253# the MASTER_SITES specified in the port Makefiles), uncomment the 254# line below. You can also change the right side to point to wherever 255# you want. 256# 257#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 258# 259# Some ports use a special variable to point to a collection of 260# mirrors of well-known software archives. If you have a mirror close 261# to you, uncomment any of the following lines and change it to that 262# address. (Don't remove the "/%SUBDIR%/" part.) 263# 264# Note: the right hand sides of the following lines are only for your 265# information. For a full list of default sites, take a look at 266# bsd.sites.mk. 267# 268#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 269#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 270#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/ 271#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/ 272#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 273#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 274#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ 275#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ 276#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ 277#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 278#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ 279#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ 280#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/ 281#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ 282#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ 283#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 284#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ 285#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 286#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ 287#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 288#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 289#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ 290#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ 291# 292# Also it is highly recommended that you configure MASTER_SORT_REGEX 293# to choose better mirror sites for you. List awk(1)-style regular 294# expressions separated by space so MASTER_SITES will be sorted in 295# that order. The following example is for Japanese users; change 296# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 297# of your nearest/upstream networks to meet your needs. 298# 299#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.] 300# 301# Ports can place their working directories somewhere other than under 302# /usr/ports. 303#WRKDIRPREFIX= /var/tmp 304# 305# Kerberos 5 306# If you want Kerberos 5 (KTH Heimdal), define this: 307# 308#MAKE_KERBEROS5= yes 309# 310# Kerberos 5 su (k5su) 311# If you want to use the k5su utility, define this to have it installed 312# set-user-ID. 313#ENABLE_SUID_K5SU= yes 314# 315# 316# Kerberos5 317# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 318# define this (this is also used to tell ssh1 that kerberos is needed): 319# 320#KRB5_HOME= /usr/local 321# 322# 323# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 324# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 325# information on CVSup and these files). To use, do "make update" in /usr/src. 326# 327#SUP_UPDATE= yes 328# 329#SUP= /usr/local/bin/cvsup 330#SUPFLAGS= -g -L 2 331#SUPHOST= cvsup.uk.FreeBSD.org 332#SUPFILE= /usr/share/examples/cvsup/stable-supfile 333#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 334#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 335# 336# top(1) uses a hash table for the user names. The size of this hash 337# can be tuned to match the number of local users. The table size should 338# be a prime number approximately twice as large as the number of lines in 339# /etc/passwd. The default number is 20011. 340# 341#TOP_TABLE_SIZE= 101 342# 343# Documentation 344# 345# The list of languages and encodings to build and install 346# 347#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 348# 349# 350# sendmail 351# 352# The following sets the default m4 configuration file to use at 353# install time. Use with caution as a make install will overwrite 354# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 355# deprecated. The value should be a fully qualified path name. 356# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 357# create /etc/mail/sendmail.cf before installworld installs an 358# updated sendmail binary. 359# 360#SENDMAIL_MC=/etc/mail/myconfig.mc 361# 362# The following sets the default m4 configuration file for mail 363# submission to use at install time. Use with caution as a make 364# install will overwrite any existing /etc/mail/submit.cf. The 365# value should be a fully qualified path name. 366# Avoid using a value of /etc/mail/submit.mc as a buildworld will 367# create /etc/mail/submit.cf before installworld installs an 368# updated sendmail binary. 369# 370#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 371# 372# If you need to build additional .cf files during a make buildworld, 373# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 374# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 375# create /etc/mail/sendmail.cf before installworld installs an 376# updated sendmail binary. 377# 378#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 379# 380# Setting the following variable modifies the flags passed to m4 when 381# building a .cf file from a .mc file. It can be used to enable 382# features disabled by default. 383# 384#SENDMAIL_M4_FLAGS= 385# 386# Setting the following variables modifies the build environment for 387# sendmail and its related utilities. For example, SASL support can be 388# added with settings such as: 389# 390# with SASLv1: 391# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 392# SENDMAIL_LDFLAGS=-L/usr/local/lib 393# SENDMAIL_LDADD=-lsasl 394# 395# with SASLv2: 396# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 397# SENDMAIL_LDFLAGS=-L/usr/local/lib 398# SENDMAIL_LDADD=-lsasl2 399# 400# Note: If you are using Cyrus SASL with other applications which require 401# access to the sasldb file, you should add the following to your 402# sendmail.mc file: 403# 404# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 405# 406#SENDMAIL_CFLAGS= 407#SENDMAIL_LDFLAGS= 408#SENDMAIL_LDADD= 409#SENDMAIL_DPADD= 410# 411# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 412# set-user-ID root binary instead of a set-group-ID smmsp binary and will 413# prevent the installation of /etc/mail/submit.cf. 414# This is a deprecated mode of operation. See etc/mail/README for more 415# information. 416# 417#SENDMAIL_SET_USER_ID= 418# 419# The permissions to use on alias and map databases generated using 420# /etc/mail/Makefile. Defaults to 0640. 421# 422#SENDMAIL_MAP_PERMS= 423