1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.16 2005/12/09 23:55:28 swildner Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# The CPUTYPE variable controls which processor should be targeted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognized: 24# Intel x86 architecture: 25# (AMD CPUs) k7 k6-2 k6 k5 26# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 27# 28# If you experience any problems after setting this flag, please unset 29# it again before submitting a bug report or attempting to modify code. 30# It may be that certain types of software will become unstable after being 31# compiled with processor-specific (or higher - see below) optimization flags. 32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 33# 34#CPUTYPE=i686 35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 37# 38# The CCVER variable controls which GCC-version to use by default. It 39# should be set using ?= so as not to interfere with CCVER overrides from 40# userland or the buildworld. We currently recommend that an override NOT 41# be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot 42# blocks, boot loader, or the kernel. 43# 44#CCVER?=gcc34 # (use GCC 3.4, default) 45#CCVER?=gcc40 # (use GCC 4.0, experimental, must define WANT_GCC40) 46# 47# Build gcc40 with world. This won't make gcc40 the default compiler 48#WANT_GCC40=yes 49# 50# CFLAGS controls the compiler settings used when compiling C code. 51# Note that optimization settings above -O (-O2, ...) are not recommended 52# or supported for compiling the world or the kernel - please revert any 53# nonstandard optimization settings to "-O" before submitting bug reports 54# to the developers. 55# 56#CFLAGS= -O -pipe 57# 58# CXXFLAGS controls the compiler settings used when compiling C++ code. 59# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 60# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 61# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 62# 63#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 64# 65# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 66# for use in developing FreeBSD and testing changes. They can be used by 67# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 68# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 69# 70BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 71 -Wcast-qual -Wchar-subscripts -Winline \ 72 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 73 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 74# 75# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 76#WARNS_WERROR= yes 77# 78# To compile just the kernel with special optimizations, you should use 79# this instead of CFLAGS (which is not applicable to kernel builds anyway). 80# There is very little to gain by using higher optimization levels, and doing 81# so can cause problems. 82# 83#COPTFLAGS= -O -pipe 84# 85# Strip the file before installing. Setting this to nothing will keep 86# the debugging symbols in the installed files. 87#STRIP= -s 88# 89# Compare before install 90#INSTALL=install -C 91# 92# To build ppp with normal permissions 93#PPP_NOSUID= true 94# 95# To enable installing ssh(1) with the setuid bit turned on 96#ENABLE_SUID_SSH= true 97# 98# To avoid building various parts of the base system: 99#NO_BIND= true # do not build BIND 100#NO_CRYPT= true # do not build crypto code 101#NO_CVS= true # do not build CVS 102#NO_FORTRAN= true # do not build g77 and related libraries 103#NO_GAMES= true # do not enter the games subdirectory 104#NO_I4B= true # do not build isdn4bsd package 105#NO_IPFILTER= true # do not build IP Filter package 106#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) 107#NO_LPR= true # do not build lpr and related programs 108#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 109#NO_MODULES= true # do not build modules with the kernel 110#NO_OBJC= true # do not build Objective C support 111#NO_OPENSSH= true # do not build OpenSSH 112#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 113#NO_PKGTOOLS= true # do not build included package tools (for pkgsrc) 114#NO_SENDMAIL= true # do not build sendmail and related programs 115#NO_SHARE= true # do not enter the share subdirectory 116#NO_X= true # do not compile in XWindows support (e.g. doscmd) 117#NOINFO= true # do not make or install info files 118#NOINFOCOMPRESS=true # do not compress info files 119#NOMAN= true # do not build manual pages 120#NOMANCOMPRESS= true # do not compress man pages 121#NOPROFILE= true # Avoid compiling profiled libraries 122#NOSHARE= true # do not go into the share subdir 123# 124# To build sys/modules when building the world (our old way of doing things) 125#MODULES_WITH_WORLD=true # do not build modules when building kernel 126# 127# The list of modules to build instead of all of them. 128#MODULES_OVERRIDE= emulation/linux net/ipfw 129# 130# To avoid running MAKEDEV all on /dev during install: 131#NO_MAKEDEV= true 132# 133# The following controls building optional IDEA code in libcrypto and 134# certain ports. Patents are involved - you must not use this unless 135# you either have a license or fall within patent 'fair use' 136# provisions. 137# 138# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 139# 140# IDEA is patented in the USA and many European countries - thought to 141# be OK to use for any non-commercial use. This is optional. 142#WANT_IDEA= YES # IDEA (128 bit symmetric encryption) 143# 144# Default format for system documentation, depends on your printer. 145# Set this to "ascii" for simple printers or screen 146# 147#PRINTERDEVICE= ps 148# 149# By default, the system will always use the keyboard/video card as system 150# console. However, the boot blocks may be dynamically configured to use a 151# serial port in addition to or instead of the keyboard/video console. 152# 153# By default we use COM1 as our serial console port *if* we're going to use 154# a serial port as our console at all. Alter as necessary. 155# 156# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 157# 158#BOOT_COMCONSOLE_PORT= 0x3F8 159# 160# The default serial console speed is 9600. Set the speed to a larger value 161# for better interactive response. 162# 163#BOOT_COMCONSOLE_SPEED= 115200 164# 165# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 166# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 167# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 168# still mount the server's '/' (i.e. rather than load the server's kernel). 169# 170#LOADER_TFTP_SUPPORT= YES 171# 172# If you're behind a firewall and need FTP or HTTP proxy services for 173# ports collection fetching to work, the following examples give the 174# necessary syntax. See the fetch(3) man page for details. 175# 176#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21 177#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80 178# 179# If you want Kerberos 5, define this. 180#WANT_KERBEROS= yes 181# 182# If you want to use the k5su utility, define this to have it installed 183# set-user-ID. 184#ENABLE_SUID_K5SU= yes 185# 186# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 187# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 188# information on CVSup and these files). To use, do "make update" in /usr/src. 189# 190#SUP_UPDATE= yes 191#SUP= /usr/local/bin/cvsup 192#SUPFLAGS= -g -L 2 193#SUPHOST= cvsup.dragonflybsd.org 194#SUPFILE= /usr/share/examples/cvsup/DragonFly-src-supfile 195#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 196# 197# top(1) uses a hash table for the user names. The size of this hash 198# can be tuned to match the number of local users. The table size should 199# be a prime number approximately twice as large as the number of lines in 200# /etc/passwd. The default number is 20011. 201# 202#TOP_TABLE_SIZE= 101 203# 204# Documentation 205# 206# The list of languages and encodings to build and install 207# 208#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 209# 210# sendmail 211# 212# The following sets the default m4 configuration file to use at 213# install time. Use with caution as a make install will overwrite 214# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 215# deprecated. The value should be a fully qualified path name. 216# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 217# create /etc/mail/sendmail.cf before installworld installs an 218# updated sendmail binary. 219# 220#SENDMAIL_MC=/etc/mail/myconfig.mc 221# 222# The following sets the default m4 configuration file for mail 223# submission to use at install time. Use with caution as a make 224# install will overwrite any existing /etc/mail/submit.cf. The 225# value should be a fully qualified path name. 226# Avoid using a value of /etc/mail/submit.mc as a buildworld will 227# create /etc/mail/submit.cf before installworld installs an 228# updated sendmail binary. 229# 230#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 231# 232# If you need to build additional .cf files during a make buildworld, 233# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 234# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 235# create /etc/mail/sendmail.cf before installworld installs an 236# updated sendmail binary. 237# 238#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 239# 240# Setting the following variable modifies the flags passed to m4 when 241# building a .cf file from a .mc file. It can be used to enable 242# features disabled by default. 243# 244#SENDMAIL_M4_FLAGS= 245# 246# Setting the following variables modifies the build environment for 247# sendmail and its related utilities. For example, SASL support can be 248# added with settings such as: 249# 250# with SASLv1: 251# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 252# SENDMAIL_LDFLAGS=-L/usr/local/lib 253# SENDMAIL_LDADD=-lsasl 254# 255# with SASLv2: 256# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 257# SENDMAIL_LDFLAGS=-L/usr/local/lib 258# SENDMAIL_LDADD=-lsasl2 259# 260# Note: If you are using Cyrus SASL with other applications which require 261# access to the sasldb file, you should add the following to your 262# sendmail.mc file: 263# 264# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 265# 266#SENDMAIL_CFLAGS= 267#SENDMAIL_LDFLAGS= 268#SENDMAIL_LDADD= 269#SENDMAIL_DPADD= 270# 271# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 272# set-user-ID root binary instead of a set-group-ID smmsp binary and will 273# prevent the installation of /etc/mail/submit.cf. 274# This is a deprecated mode of operation. See etc/mail/README for more 275# information. 276# 277#SENDMAIL_SET_USER_ID= 278# 279# The permissions to use on alias and map databases generated using 280# /etc/mail/Makefile. Defaults to 0640. 281# 282#SENDMAIL_MAP_PERMS= 283