1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# 3# NOTE: Please would any committer updating this file also update the 4# make.conf(5) manual page, if necessary, which is located in 5# src/share/man/man5/make.conf.5. 6# 7# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 8# It allows you to override macro definitions to make without changing 9# your source tree, or anything the source tree installs. 10# 11# This file must be in valid Makefile syntax. 12# 13# You have to find the things you can put here in the Makefiles and 14# documentation of the source tree. 15# 16# The CPUTYPE variable controls which processor should be targeted for 17# generated code. This controls processor-specific optimizations in 18# certain code (currently only OpenSSL) as well as modifying the value 19# of CFLAGS to contain the appropriate optimization directive to gcc. 20# The automatic setting of CFLAGS may be overridden using the 21# NO_CPU_CFLAGS variable below. 22# Currently the following CPU types are recognized: 23# Intel x86 architecture: 24# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 25# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 26# 27# If you experience any problems after setting this flag, please unset 28# it again before submitting a bug report or attempting to modify code. 29# It may be that certain types of software will become unstable after being 30# compiled with processor-specific (or higher - see below) optimization flags. 31# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 32# 33#CPUTYPE=i686 34#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 35#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 36# 37# The CCVER variable controls which GCC-version to use by default. It 38# should be set using ?= so as not to interfere with CCVER overrides from 39# userland or the buildworld. Note that building world or the kernel using 40# an experimental compiler might be broken at any time. We currently 41# recommend that an override NOT be set in /etc/make.conf. 42# 43#CCVER?=gcc47 # (use GCC 4.7, default) 44# 45# CFLAGS controls the compiler settings used when compiling C code. 46# Note that optimization settings above -O (-O2, ...) are not recommended 47# or supported for compiling the world or the kernel - please revert any 48# nonstandard optimization settings to "-O" before submitting bug reports 49# to the developers. 50# 51#CFLAGS= -O -pipe 52# 53# CXXFLAGS controls the compiler settings used when compiling C++ code. 54# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 55# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 56# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 57# 58#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 59# 60# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 61# for use in developing FreeBSD and testing changes. They can be used by 62# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 63# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 64# 65BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 66 -Wcast-qual -Wchar-subscripts -Winline \ 67 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 68 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 69# 70# To compile just the kernel with special optimizations, you should use 71# this instead of CFLAGS (which is not applicable to kernel builds anyway). 72# There is very little to gain by using higher optimization levels, and doing 73# so can cause problems. 74# 75#COPTFLAGS= -O -pipe 76# 77# Strip the file before installing. Setting this to nothing will keep 78# the debugging symbols in the installed files. 79#STRIP= -s 80# 81# Compare before install 82#INSTALL=install -C 83# 84# Inhibit the automatic backup during installworld 85#NO_BACKUP= true 86# 87# To build ppp with normal permissions 88#PPP_NOSUID= true 89# 90# To enable installing ssh(1) with the setuid bit turned on 91#ENABLE_SUID_SSH= true 92# 93# Default thread library (c_r or thread_xu) 94THREAD_LIB?= thread_xu 95# 96# To enable Hesiod support in libc 97#WANT_HESIOD= true 98# 99# To disable name caching in the nsswitch subsystem. The generic caching 100# daemon, nscd(8), will not be built either if this option is set. 101#NO_NS_CACHING= true 102# 103# To avoid building various parts of the base system: 104#NO_ALTBINUTILS=true # do not build the alternative set of binutils 105#NO_CRYPT= true # do not build crypto code 106#NO_CVS= true # do not build CVS 107#NO_GAMES= true # do not enter the games subdirectory 108#NO_GCC44= true # do not build gcc-4.4 109#NO_GDB= true # do not build GDB 110#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) 111#NO_LPR= true # do not build lpr and related programs 112#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 113#NO_MODULES= true # do not build modules with the kernel 114#NO_OBJC= true # do not build Objective C support 115#NO_OPENSSH= true # do not build OpenSSH 116#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 117#NO_SENDMAIL= true # do not build sendmail and related programs 118#NO_SHARE= true # do not enter the share subdirectory 119#NOINFO= true # do not make or install info files 120#NOINFOCOMPRESS=true # do not compress info files 121#NOMAN= true # do not build manual pages 122#NOMANCOMPRESS= true # do not compress man pages 123#NOPROFILE= true # Avoid compiling profiled libraries 124# 125# To build sys/modules when building the world (our old way of doing things) 126#MODULES_WITH_WORLD=true # do not build modules when building kernel 127# 128# The list of modules to build instead of all of them. 129#MODULES_OVERRIDE= emulation/linux net/ipfw 130# 131# The following controls building optional IDEA code in libcrypto. 132# Patents are involved - you must not use this unless 133# you either have a license or fall within patent 'fair use' 134# provisions. 135# 136# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 137# 138# IDEA is patented in the USA and many European countries - thought to 139# be OK to use for any non-commercial use. This is optional. 140#WANT_IDEA= YES # IDEA (128 bit symmetric encryption) 141# 142# The paper size for groff(1), either "letter" or "A4" 143#GROFF_PAPER_SIZE= letter 144# 145# Default format for system documentation, depends on your printer. 146# Set this to "ascii" for simple printers or screen 147# 148#PRINTERDEVICE= ps 149# 150# By default, the system will always use the keyboard/video card as system 151# console. However, the boot blocks may be dynamically configured to use a 152# serial port in addition to or instead of the keyboard/video console. 153# 154# By default we use COM1 as our serial console port *if* we're going to use 155# a serial port as our console at all. Alter as necessary. 156# 157# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 158# 159#BOOT_COMCONSOLE_PORT= 0x3F8 160# 161# The default serial console speed is 9600. Set the speed to a larger value 162# for better interactive response. 163# 164#BOOT_COMCONSOLE_SPEED= 115200 165# 166# To build the installer as part of buildworld. 167#WANT_INSTALLER=yes 168# 169# Documentation 170# 171# The list of languages and encodings to build and install 172# 173#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 174# 175# The list of locale modules to be compiled-in in the static 176# libc.a (and profile/libc.a). 177#STATIC_LOCALES=BIG5 EUC EUCTW ISO2022 MSKanji UTF8 178STATIC_LOCALES=UTF8 179# sendmail 180# 181# The following sets the default m4 configuration file to use at 182# install time. Use with caution as a make install will overwrite 183# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 184# deprecated. The value should be a fully qualified path name. 185# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 186# create /etc/mail/sendmail.cf before installworld installs an 187# updated sendmail binary. 188# 189#SENDMAIL_MC=/etc/mail/myconfig.mc 190# 191# The following sets the default m4 configuration file for mail 192# submission to use at install time. Use with caution as a make 193# install will overwrite any existing /etc/mail/submit.cf. The 194# value should be a fully qualified path name. 195# Avoid using a value of /etc/mail/submit.mc as a buildworld will 196# create /etc/mail/submit.cf before installworld installs an 197# updated sendmail binary. 198# 199#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 200# 201# If you need to build additional .cf files during a make buildworld, 202# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 203# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 204# create /etc/mail/sendmail.cf before installworld installs an 205# updated sendmail binary. 206# 207#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 208# 209# Setting the following variable modifies the flags passed to m4 when 210# building a .cf file from a .mc file. It can be used to enable 211# features disabled by default. 212# 213#SENDMAIL_M4_FLAGS= 214# 215# Setting the following variables modifies the build environment for 216# sendmail and its related utilities. For example, SASL support can be 217# added with settings such as: 218# 219# with SASLv1: 220# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 221# SENDMAIL_LDFLAGS=-L/usr/local/lib 222# SENDMAIL_LDADD=-lsasl 223# 224# with SASLv2: 225# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 226# SENDMAIL_LDFLAGS=-L/usr/local/lib 227# SENDMAIL_LDADD=-lsasl2 228# 229# Note: If you are using Cyrus SASL with other applications which require 230# access to the sasldb file, you should add the following to your 231# sendmail.mc file: 232# 233# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 234# 235#SENDMAIL_CFLAGS= 236#SENDMAIL_LDFLAGS= 237#SENDMAIL_LDADD= 238#SENDMAIL_DPADD= 239# 240# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 241# set-user-ID root binary instead of a set-group-ID smmsp binary and will 242# prevent the installation of /etc/mail/submit.cf. 243# This is a deprecated mode of operation. See etc/mail/README for more 244# information. 245# 246#SENDMAIL_SET_USER_ID= 247# 248# The permissions to use on alias and map databases generated using 249# /etc/mail/Makefile. Defaults to 0640. 250# 251#SENDMAIL_MAP_PERMS= 252# 253# Switch dports to building new Xorg versions and KMS packages by default 254# on x86_64 systems 255.if ${MACHINE_ARCH} == "x86_64" 256WITH_NEW_XORG= yes 257WITH_KMS= yes 258.endif 259