1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.28 2007/03/22 23:31:22 swildner Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# The CPUTYPE variable controls which processor should be targeted for 18# generated code. This controls processor-specific optimizations in 19# certain code (currently only OpenSSL) as well as modifying the value 20# of CFLAGS to contain the appropriate optimization directive to gcc. 21# The automatic setting of CFLAGS may be overridden using the 22# NO_CPU_CFLAGS variable below. 23# Currently the following CPU types are recognized: 24# Intel x86 architecture: 25# (AMD CPUs) opteron athlon-fx athlon64 k8 k7 k6-3 k6-2 k6 k5 26# (Intel CPUs) p4 pentium-m p3 p2 i686 i586/mmx i586 i486 27# 28# If you experience any problems after setting this flag, please unset 29# it again before submitting a bug report or attempting to modify code. 30# It may be that certain types of software will become unstable after being 31# compiled with processor-specific (or higher - see below) optimization flags. 32# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 33# 34#CPUTYPE=i686 35#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 36#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 37# 38# The CCVER variable controls which GCC-version to use by default. It 39# should be set using ?= so as not to interfere with CCVER overrides from 40# userland or the buildworld. Note that building world or the kernel using 41# the experimental compiler might be broken at any time. We currently 42# recommend that an override NOT be set in /etc/make.conf. 43# 44#CCVER?=gcc34 # (use GCC 3.4, default) 45#CCVER?=gcc41 # (use GCC 4.1, experimental) 46# 47# CFLAGS controls the compiler settings used when compiling C code. 48# Note that optimization settings above -O (-O2, ...) are not recommended 49# or supported for compiling the world or the kernel - please revert any 50# nonstandard optimization settings to "-O" before submitting bug reports 51# to the developers. 52# 53#CFLAGS= -O -pipe 54# 55# CXXFLAGS controls the compiler settings used when compiling C++ code. 56# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 57# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 58# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 59# 60#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 61# 62# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 63# for use in developing FreeBSD and testing changes. They can be used by 64# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 65# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 66# 67BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 68 -Wcast-qual -Wchar-subscripts -Winline \ 69 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 70 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 71# 72# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 73#WARNS_WERROR= yes 74# 75# To compile just the kernel with special optimizations, you should use 76# this instead of CFLAGS (which is not applicable to kernel builds anyway). 77# There is very little to gain by using higher optimization levels, and doing 78# so can cause problems. 79# 80#COPTFLAGS= -O -pipe 81# 82# Strip the file before installing. Setting this to nothing will keep 83# the debugging symbols in the installed files. 84#STRIP= -s 85# 86# Compare before install 87#INSTALL=install -C 88# 89# To build ppp with normal permissions 90#PPP_NOSUID= true 91# 92# To enable installing ssh(1) with the setuid bit turned on 93#ENABLE_SUID_SSH= true 94# 95# To avoid building various parts of the base system: 96#NO_BIND= true # do not build BIND 97#NO_CRYPT= true # do not build crypto code 98#NO_CVS= true # do not build CVS 99#NO_FORTRAN= true # do not build g77 and related libraries 100#NO_GAMES= true # do not enter the games subdirectory 101#NO_GDB= true # do not build GDB 102#NO_GCC41= true # do not build gcc-4.1 103#NO_I4B= true # do not build isdn4bsd package 104#NO_IPFILTER= true # do not build IP Filter package 105#NO_LIBC_R= true # do not build libc_r (re-entrant version of libc) 106#NO_LPR= true # do not build lpr and related programs 107#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 108#NO_MODULES= true # do not build modules with the kernel 109#NO_OBJC= true # do not build Objective C support 110#NO_OPENSSH= true # do not build OpenSSH 111#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 112#NO_SENDMAIL= true # do not build sendmail and related programs 113#NO_SHARE= true # do not enter the share subdirectory 114#NO_X= true # do not compile in XWindows support (e.g. doscmd) 115#NOINFO= true # do not make or install info files 116#NOINFOCOMPRESS=true # do not compress info files 117#NOMAN= true # do not build manual pages 118#NOMANCOMPRESS= true # do not compress man pages 119#NOPROFILE= true # Avoid compiling profiled libraries 120# 121# To build sys/modules when building the world (our old way of doing things) 122#MODULES_WITH_WORLD=true # do not build modules when building kernel 123# 124# The list of modules to build instead of all of them. 125#MODULES_OVERRIDE= emulation/linux net/ipfw 126# 127# To avoid running MAKEDEV all on /dev during install: 128#NO_MAKEDEV= true 129# 130# The following controls building optional IDEA code in libcrypto. 131# Patents are involved - you must not use this unless 132# you either have a license or fall within patent 'fair use' 133# provisions. 134# 135# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 136# 137# IDEA is patented in the USA and many European countries - thought to 138# be OK to use for any non-commercial use. This is optional. 139#WANT_IDEA= YES # IDEA (128 bit symmetric encryption) 140# 141# The paper size for groff(1), either "letter" or "A4" 142#GROFF_PAPER_SIZE= letter 143# 144# Default format for system documentation, depends on your printer. 145# Set this to "ascii" for simple printers or screen 146# 147#PRINTERDEVICE= ps 148# 149# By default, the system will always use the keyboard/video card as system 150# console. However, the boot blocks may be dynamically configured to use a 151# serial port in addition to or instead of the keyboard/video console. 152# 153# By default we use COM1 as our serial console port *if* we're going to use 154# a serial port as our console at all. Alter as necessary. 155# 156# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 157# 158#BOOT_COMCONSOLE_PORT= 0x3F8 159# 160# The default serial console speed is 9600. Set the speed to a larger value 161# for better interactive response. 162# 163#BOOT_COMCONSOLE_SPEED= 115200 164# 165# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 166# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 167# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 168# still mount the server's '/' (i.e. rather than load the server's kernel). 169# 170#LOADER_TFTP_SUPPORT= YES 171# 172# If you want Kerberos 5, define this. 173#WANT_KERBEROS= yes 174# 175# If you want to use the k5su utility, define this to have it installed 176# set-user-ID. 177#ENABLE_SUID_K5SU= yes 178# 179# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 180# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 181# information on CVSup and these files). To use, do "make update" in /usr/src. 182# 183#SUP_UPDATE= yes 184#SUP= /usr/local/bin/cvsup 185#SUPFLAGS= -g -L 2 186#SUPHOST= cvsup.dragonflybsd.org 187#SUPFILE= /usr/share/examples/cvsup/DragonFly-src-supfile 188#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 189# 190# top(1) uses a hash table for the user names. The size of this hash 191# can be tuned to match the number of local users. The table size should 192# be a prime number approximately twice as large as the number of lines in 193# /etc/passwd. The default number is 20011. 194# 195#TOP_TABLE_SIZE= 101 196# 197# Documentation 198# 199# The list of languages and encodings to build and install 200# 201#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 202# 203# sendmail 204# 205# The following sets the default m4 configuration file to use at 206# install time. Use with caution as a make install will overwrite 207# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 208# deprecated. The value should be a fully qualified path name. 209# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 210# create /etc/mail/sendmail.cf before installworld installs an 211# updated sendmail binary. 212# 213#SENDMAIL_MC=/etc/mail/myconfig.mc 214# 215# The following sets the default m4 configuration file for mail 216# submission to use at install time. Use with caution as a make 217# install will overwrite any existing /etc/mail/submit.cf. The 218# value should be a fully qualified path name. 219# Avoid using a value of /etc/mail/submit.mc as a buildworld will 220# create /etc/mail/submit.cf before installworld installs an 221# updated sendmail binary. 222# 223#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 224# 225# If you need to build additional .cf files during a make buildworld, 226# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 227# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 228# create /etc/mail/sendmail.cf before installworld installs an 229# updated sendmail binary. 230# 231#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 232# 233# Setting the following variable modifies the flags passed to m4 when 234# building a .cf file from a .mc file. It can be used to enable 235# features disabled by default. 236# 237#SENDMAIL_M4_FLAGS= 238# 239# Setting the following variables modifies the build environment for 240# sendmail and its related utilities. For example, SASL support can be 241# added with settings such as: 242# 243# with SASLv1: 244# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 245# SENDMAIL_LDFLAGS=-L/usr/local/lib 246# SENDMAIL_LDADD=-lsasl 247# 248# with SASLv2: 249# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 250# SENDMAIL_LDFLAGS=-L/usr/local/lib 251# SENDMAIL_LDADD=-lsasl2 252# 253# Note: If you are using Cyrus SASL with other applications which require 254# access to the sasldb file, you should add the following to your 255# sendmail.mc file: 256# 257# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 258# 259#SENDMAIL_CFLAGS= 260#SENDMAIL_LDFLAGS= 261#SENDMAIL_LDADD= 262#SENDMAIL_DPADD= 263# 264# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 265# set-user-ID root binary instead of a set-group-ID smmsp binary and will 266# prevent the installation of /etc/mail/submit.cf. 267# This is a deprecated mode of operation. See etc/mail/README for more 268# information. 269# 270#SENDMAIL_SET_USER_ID= 271# 272# The permissions to use on alias and map databases generated using 273# /etc/mail/Makefile. Defaults to 0640. 274# 275#SENDMAIL_MAP_PERMS= 276