1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_debug="NO" # Set to YES to enable debugging output from rc.d 23rc_info="YES" # Enables display of informational messages at boot. 24rc_startmsgs="YES" # Show "Starting foo:" messages at boot 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27powerd_enable="NO" # Run powerd to adjust CPU speed. 28powerd_flags="" # additional flags for powerd(8). 29sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. 30sensorsd_flags="" # additional flags for sensorsd(8). 31hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging. 32hotplugd_flags="" # additional flags for hotplugd(8) 33pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 34pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 35removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 36local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d" 37 # startup script dirs. 38script_name_sep=" " # Change if your startup scripts' names contain spaces 39rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 40fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 41netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL" # Net filesystems. 42extra_netfs_types="NO" # List of network extra filesystem types for delayed 43 # mount at startup (or NO). 44devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" 45 # Config files for devfs(5) 46 47############################################################## 48### Network configuration sub-section ###################### 49############################################################## 50 51### Basic network and firewall/security options: ### 52# 53# see 'man firewall' for an explanation of the default firewall rules 54# 55hostname="" # Set this! 56nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 57dhclient_program="/sbin/dhclient" # Path to dhcp client program. 58dhclient_flags="-w" # Additional flags to pass to dhcp client. 59firewall_enable="NO" # Set to YES to enable firewall functionality 60firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 61firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 62firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 63firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 64firewall_allowed_icmp_types="0 3 8 11 12 13 14" 65firewall_open_tcp_ports="22 25 53 80 113 443" 66firewall_open_udp_ports="53" 67firewall_quiet="NO" # Set to YES to suppress rule display 68firewall_logging="NO" # Set to YES to enable events logging 69firewall_flags="" # Flags passed to ipfw when type is a file 70ip_portrange_first="NO" # Set first dynamically allocated port 71ip_portrange_last="NO" # Set last dynamically allocated port 72ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 73ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 74natd_program="/sbin/natd" # path to natd, if you want a different one. 75natd_enable="NO" # Enable natd (if firewall_enable == YES). 76natd_interface="" # Public interface or IPaddress to use. 77natd_flags="" # Additional flags for natd. 78pf_enable="NO" # Set to YES to enable packet filter (pf) 79pf_rules="/etc/pf.conf" # rules definition file for pf 80pf_program="/usr/sbin/pfctl" # where the pfctl program lives 81pf_flags="" # additional flags for pfctl 82pflog_enable="NO" # Set to YES to enable packet filter logging 83pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 84pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 85pflog_flags="" # additional flags for pflogd 86tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 87log_in_vain="0" # >=1 to log connects to ports w/o listeners. 88tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 89# For the following option you need to have TCP_DROP_SYNFIN set in your 90# kernel. Please refer to LINT64 details. 91tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 92 # NOTE: this violates the TCP specification 93icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 94icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 95network_interfaces="auto" # List of network interfaces (or "auto"). 96cloned_interfaces="" # List of cloned network interfaces to create. 97#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config. 98ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 99#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 100#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 101# 102# If you have any sppp(4) interfaces above, you might also want to set 103# the following parameters. Refer to spppcontrol(8) for their meaning. 104sppp_interfaces="" # List of sppp interfaces. 105#sppp_interfaces="...0" # example: sppp over ... 106#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 107gif_interfaces="NO" # List of GIF tunnels (or "NO"). 108#gif_interfaces="gif0 gif1" # Examples typically for a router. 109 # Choose correct tunnel addrs. 110#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 111#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 112 113# User ppp configuration. 114ppp_enable="NO" # Start user-ppp (or NO). 115ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 116 # For details see man page for ppp(8). Default is auto. 117ppp_nat="YES" # Use PPP's internal network address translation or NO. 118ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 119ppp_user="root" # Which user to run ppp as 120 121### Network daemon (miscellaneous) ### 122syslogd_enable="YES" # Run syslog daemon (or NO). 123syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 124#syslogd_flags="-s" # Flags to syslogd (if enabled). 125syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 126inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 127inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 128inetd_flags="-wW" # Optional flags to inetd 129 130rwhod_enable="NO" # Run the rwho daemon (or NO). 131rwhod_flags="" # Flags for rwhod 132rarpd_enable="NO" # Run rarpd (or NO). 133rarpd_flags="" # Flags to rarpd. 134bootparamd_enable="NO" # Run bootparamd (or NO). 135bootparamd_flags="" # Flags to bootparamd 136pppoed_enable="NO" # Run the PPP over Ethernet daemon. 137pppoed_provider="*" # Provider and ppp(8) config file entry. 138pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 139pppoed_interface="fxp0" # The interface that pppoed runs on. 140sshd_enable="NO" # Enable sshd 141sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 142sshd_flags="" # Additional flags for sshd. 143 144ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). 145ftpd_flags="" # Flags for ftpd, -D added implicitly. 146 147### Network File System (NFS): ### 148### Server-side options also need rpcbind_enable="YES" ### 149### 150### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 151### the mtime matches the data cache is left intact. 152### 153amd_enable="NO" # Run amd service with $amd_flags (or NO). 154amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 155amd_map_program="NO" # Can be set to "ypcat -k amd.master" 156nfs_client_enable="NO" # This host is an NFS client (or NO). 157nfs_access_cache="5" # Client attribute cache timeout in seconds 158#nfs_neg_cache="3" # Client attribute negative hit cache timeout 159nfs_server_enable="NO" # This host is an NFS server (or NO). 160nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 161mountd_enable="NO" # Run mountd (or NO). 162mountd_flags="-r" # Flags to mountd (if NFS server enabled). 163weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 164nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 165nfs_bufpackets="" # bufspace (in packets) for client 166rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 167rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 168rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 169rpc_statd_flags="" # Flags to rpc.statd (if enabled). 170rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 171rpcbind_enable="NO" # Run the portmapper service (YES/NO). 172rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 173rpcbind_flags="" # Flags to rpcbind (if enabled). 174rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 175keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 176keyserv_flags="" # Flags to keyserv (if enabled). 177 178### Network Time Services options: ### 179timed_enable="NO" # Run the time daemon (or NO). 180timed_flags="" # Flags to timed (if enabled). 181dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 182dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 183dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 184 185# Bluetooth deamons and options: 186btconfig_enable="NO" # Configure Bluetooth devices (or NO). 187btconfig_devices="" # List of Bluetooth devices (or empty for all). 188#btconfig_<device>="" # Parameters to pass to <device>. 189btconfig_args="" # Parameters to pass to all devices. 190sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). 191sdpd_flags="" # Flags to sdpd (if enabled). 192bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). 193bthcid_flags="" # Flags to bthcid (if enabled). 194 195# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 196nis_client_enable="NO" # We're an NIS client (or NO). 197nis_client_flags="" # Flags to ypbind (if enabled). 198nis_ypset_enable="NO" # Run ypset at boot time (or NO). 199nis_ypset_flags="" # Flags to ypset (if enabled). 200nis_server_enable="NO" # We're an NIS server (or NO). 201nis_server_flags="" # Flags to ypserv (if enabled). 202nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 203nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 204nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 205nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 206 207### Network routing options: ### 208defaultrouter="NO" # Set to default gateway (or NO). 209static_routes="" # Set to static route list (or leave empty). 210gateway_enable="NO" # Set to YES if this host will be a gateway. 211router_enable="NO" # Set to YES to enable a routing daemon. 212router_program="/sbin/routed" # Name of routing daemon to use if enabled. 213router_flags="-q" # Flags for routing daemon. 214mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 215mrouted_flags="" # Flags for multicast routing daemon. 216arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 217forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 218accept_sourceroute="NO" # accept source routed packets to us 219 220### Miscellaneous network options: ### 221icmp_bmcastecho="NO" # respond to broadcast ping packets 222 223### IPv6 options: ### 224ipv6_enable="NO" # Set to YES to set up for IPv6. 225ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 226ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 227#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 228ipv6_static_routes="" # Set to static route list (or leave empty). 229#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 230 # route toward loopback interface. 231#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 232ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 233ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 234ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 235ipv6_router_flags="" # Flags to IPv6 routing daemon. 236#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 237 # addrs. 238#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 239 # node, you should stop advertisement. 240#ipv6_network_interfaces="ed0 ep0" # Examples for router 241 # or static configuration for end node. 242 # Choose correct prefix value. 243#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 244#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 245#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 246#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 247ipv6_default_interface="NO" # Default output interface for scoped addrs. 248 # Now this works only for IPv6 link local 249 # multicast addrs. 250rtadvd_enable="NO" # Set to YES to enable an IPv6 router 251 # advertisement daemon. If set to YES, 252 # this router becomes a possible candidate 253 # IPv6 default router for local subnets. 254rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 255rtsold_enable="NO" # Set to YES to enable an IPv6 routing 256 # solicitation daemon. This is used for 257 # automatic discovery of non-link local 258 # addresses. 259rtsold_flags="-a" # Do autoprobing of outgoing interface. 260mroute6d_enable="NO" # Do IPv6 multicast routing. 261mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 262 # routing daemon. You need to 263 # install it from package or 264 # port. 265mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 266stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 267 # tunneling interface. Specify this entry 268 # to enable 6to4 interface. 269stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 270 # to limit peer addr range. Effective value 271 # is 0-31. 272stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 273 # If you like, you can set "AUTO" for this. 274stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 275ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 276 # IPv6-to-IPv4 TCP translator. You also need 277 # faithd(8) setup. 278ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 279 # functionality 280ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 281ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 282ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 283ipv6_firewall_logging="NO" # Set to YES to enable events logging 284ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 285 286############################################################## 287### System console options ################################# 288############################################################## 289 290keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 291keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 292keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 293keychange="NO" # function keys default values (or NO). 294cursor="NO" # cursor type {normal|blink|destructive} (or NO). 295scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 296font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 297font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 298font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 299blanktime="300" # blank time (in seconds) or "NO" to turn it off. 300saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 301moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 302 # specifically overriden in rc.conf(5). 303moused_enable="NO" # Run the mouse daemon. 304moused_type="auto" # See man page for rc.conf(5) for available settings. 305moused_port="/dev/psm0" # Set to your mouse port. 306moused_flags="" # Any additional flags to moused. 307mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 308 # language code table, specify alternative range 309 # start like mousechar_start=3, see vidcontrol(1) 310vidhistory="" # Set video history buffer size 311allscreens_flags="" # Set this vidcontrol mode for all virtual screens 312allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 313 314 315############################################################## 316### Mail Transfer Agent (MTA) options ###################### 317############################################################## 318 319mta_start_script="/etc/rc.sendmail" 320 # Script to start your chosen MTA, called by /etc/rc. 321# Settings for /etc/rc.sendmail: 322sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 323sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 324sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 325sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 326 # Flags for localhost-only MTA 327sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 328sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 329sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 330sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 331 # Flags for sendmail_msp_queue daemon. 332sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). 333 334 335############################################################## 336### Miscellaneous administrative options ################### 337############################################################## 338 339mixer_enable="YES" # Manage mixer settings across reboots 340cron_enable="YES" # Run the periodic job daemon. 341cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 342cron_flags="" # Which options to pass to the cron daemon. 343lpd_enable="NO" # Run the line printer daemon. 344lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 345lpd_flags="" # Flags to lpd (if enabled). 346nscd_enable="NO" # Run the nsswitch caching daemon. 347devd_enable="YES" # Run devd, to trigger programs on device tree changes. 348devd_flags="" # Additional flags for devd(8). 349dumpdev="NO" # Device name to crashdump to (or NO). 350dumpdir="/var/crash" # Directory where crash dumps are to be stored 351savecore_flags="" # Used if dumpdev is enabled above, and present. 352crashinfo_enable="YES" # Automatically generate crash dump summary. 353crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 354enable_quotas="NO" # turn on quotas on startup (or NO). 355check_quotas="YES" # Check quotas on startup (or NO). 356accounting_enable="NO" # Turn on process accounting (or NO). 357sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO). 358linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 359clear_tmp_enable="NO" # Clear /tmp at startup. 360ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 361ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib" 362 # shared library search paths 363ldconfig_local_dirs="/usr/local/libdata/ldconfig" 364 # Local directories with ldconfig configuration files. 365kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 366update_motd="YES" # update version info in /etc/motd (or NO) 367start_vinum="NO" # set to YES to start vinum 368udevd_enable="NO" # Run udevd(8) daemon. 369udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm). 370lvm_enable="NO" # Run LVM volume discovery. 371entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 372entropy_save_sz="16384" # Size of the entropy cache files (in bytes) 373rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 374dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 375newsyslog_enable="NO" # Run newsyslog at startup. 376newsyslog_flags="" # Flags to newsyslog (if enabled). 377resident_enable="NO" # Process /etc/resident.conf 378varsym_enable="NO" # Process /etc/varsym.conf 379watchdogd_enable="NO" # Start the software watchdog daemon 380 381############################################################## 382### Jail Configuration ####################################### 383############################################################## 384 385jail_enable="NO" # Set to NO to disable starting of any jails 386jail_list="" # Space separated list of names of jails 387jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 388jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 389jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 390 391# 392# To use rc's built-in jail infrastructure create entries for 393# each jail, specified in jail_list, with the following variables. 394# NOTES: 395# - replace 'example' with the jail's name. 396# - except rootdir, hostname and ip, all of the following variables may be made 397# global jail variables if you don't specify a jail name (ie. jail_interface). 398# 399#jail_example_rootdir="/usr/jail/default" # Jail's root directory 400#jail_example_hostname="default.domain.com" # Jail's hostname 401#jail_example_ip="192.168.0.10" # Jail's IP number 402#jail_example_interface="" # Interface to create the IP alias on 403#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 404#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 405#jail_example_procfs_enable="NO" # mount procfs in jail 406#jail_example_devfs_enable="NO" # mount devfs in jail 407#jail_example_mount_enable="NO" # mount/umount jail's fs 408#jail_example_fstab="" # fstab(5) for mount/umount 409#jail_example_flags="-l -U root" # flags for jail(8) 410 411############################################################## 412### VFS quota options ####################################### 413############################################################## 414 415vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options 416vfs_quota_sync="" # Space separated list of mount points or "NO" 417 418############################################################## 419### VKernel options ######################################### 420############################################################## 421 422vkernel_enable="NO" # Set to YES to enable starting of vkernels 423vkernel_list="" # Space separated list of names of vkernels 424#vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary 425#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued 426 427vknetd_enable="NO" # Bridged networking 428vknetd_flags="-U" # Bridged networking flags 429# 430# Create an entry for each vkernel specified in vkernel_list 431# replacing 'example' by the name of the vkernel. 432# 433#vkernel_example_bin="/boot/kernel.VKERNEL64" 434 # Path to the vkernel binary 435#vkernel_example_memsize="64m" 436 # Amount of memory for the vkernel 437#vkernel_example_rootimg_list="/var/vkernel/rootimg.01" 438 # Space separated list of disk images 439#vkernel_example_iface_list="auto:bridge0" 440 # Optional: space separated list network interfaces for the vkernel 441#vkernel_example_logfile="/dev/null" 442 # Optional: path to the console log file 443#vkernel_example_flags="-U" 444 # Optional: aditional flags to start the vkernel with 445#vkernel_example_kill_timeout="45" 446 # Optional: timeout before SIGKILL is issued when stopping the vkernel 447 448############################################################## 449### Define source_rc_confs, the mechanism used by /etc/rc.* ## 450### scripts to source rc_conf_files overrides safely. ## 451############################################################## 452 453if [ -z "${source_rc_confs_defined}" ]; then 454 source_rc_confs_defined=yes 455 source_rc_confs () { 456 local i sourced_files 457 for i in ${rc_conf_files}; do 458 case ${sourced_files} in 459 *:$i:*) 460 ;; 461 *) 462 sourced_files="${sourced_files}:$i:" 463 if [ -r $i ]; then 464 . $i 465 fi 466 ;; 467 esac 468 done 469 } 470fi 471