1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="YES" # Enables display of informational messages at boot. 26rc_startmsgs="YES" # Show "Starting foo:" messages at boot 27rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 28swapfile="NO" # Set to name of swapfile if aux swapfile desired. 29powerd_enable="NO" # Run powerd to adjust CPU speed. 30powerd_flags="" # additional flags for powerd(8). 31sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. 32sensorsd_flags="" # additional flags for sensorsd(8). 33hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging. 34hotplugd_flags="" # additional flags for hotplugd(8) 35pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 36removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 37local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d" 38 # startup script dirs. 39script_name_sep=" " # Change if your startup scripts' names contain spaces 40rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 41fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 42netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 43extra_netfs_types="NO" # List of network extra filesystem types for delayed 44 # mount at startup (or NO). 45devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" 46 # Config files for devfs(5) 47tmpfs_var_run="NO" # Set to YES to mount a tmpfs(5) at /var/run 48tmpfs_tmp="NO" # Set to YES to mount a tmpfs(5) at /tmp 49 50############################################################## 51### Network configuration sub-section ###################### 52############################################################## 53 54### Basic network and firewall/security options: ### 55# 56# see 'man firewall' for an explanation of the default firewall rules 57# 58hostname="" # Set this! 59nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 60dhcp_client="dhclient" # Name of the rc script that is called to start 61 # the DHCP client, e.g., "dhcpcd" or "dhclient" 62dhcpcd_enable="NO" # Set to YES to run dhcpcd in master mode. 63dhcpcd_program="/sbin/dhcpcd" 64dhcpcd_flags="-b" 65dhclient_program="/sbin/dhclient" # Path to dhcp client program. 66dhclient_flags="-w" # Additional flags to pass to dhcp client. 67firewall_enable="NO" # Set to YES to enable firewall functionality 68firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 69firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 70firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 71firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 72firewall_allowed_icmp_types="0 3 8 11 12 13 14" 73firewall_open_tcp_ports="22 25 53 80 113 443" 74firewall_open_udp_ports="53" 75firewall_quiet="NO" # Set to YES to suppress rule display 76firewall_logging="NO" # Set to YES to enable events logging 77firewall_flags="" # Flags passed to ipfw when type is a file 78ipfw3_enable="NO" # Set to YES to enable ipfw3(8) firewall 79ipfw3_program="/sbin/ipfw3" # where the ipfw3 program lives 80ipfw3_script="/etc/ipfw3.rules" # Script to run to set up the firewall rules 81ipfw3_modules="ipfw3 ipfw3_basic" # IPFW3 modules to be loaded 82ip_portrange_first="NO" # Set first dynamically allocated port 83ip_portrange_last="NO" # Set last dynamically allocated port 84natd_program="/sbin/natd" # path to natd, if you want a different one. 85natd_enable="NO" # Enable natd (if firewall_enable == YES). 86natd_interface="" # Public interface or IPaddress to use. 87natd_flags="" # Additional flags for natd. 88pf_enable="NO" # Set to YES to enable packet filter (pf) 89pf_rules="/etc/pf.conf" # rules definition file for pf 90pf_program="/usr/sbin/pfctl" # where the pfctl program lives 91pf_flags="" # additional flags for pfctl 92pflog_enable="NO" # Set to YES to enable packet filter logging 93pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 94pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 95pflog_flags="" # additional flags for pflogd 96tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 97log_in_vain="0" # >=1 to log connects to ports w/o listeners. 98tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 99# For the following option you need to have TCP_DROP_SYNFIN set in your 100# kernel. Please refer to LINT64 details. 101tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 102 # NOTE: this violates the TCP specification 103icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 104icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 105netif_enable="YES" # Set to NO to not configure network interfaces. 106network_interfaces="auto" # List of network interfaces (or "auto"). 107cloned_interfaces="" # List of cloned network interfaces to create. 108#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config. 109ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 110#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 111#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 112# 113# If you have any sppp(4) interfaces above, you might also want to set 114# the following parameters. Refer to spppcontrol(8) for their meaning. 115sppp_interfaces="" # List of sppp interfaces. 116#sppp_interfaces="...0" # example: sppp over ... 117#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 118gif_interfaces="NO" # List of GIF tunnels (or "NO"). 119#gif_interfaces="gif0 gif1" # Examples typically for a router. 120 # Choose correct tunnel addrs. 121#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 122#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 123 124# User ppp configuration. 125ppp_enable="NO" # Start user-ppp (or NO). 126ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 127 # For details see man page for ppp(8). Default is auto. 128ppp_nat="YES" # Use PPP's internal network address translation or NO. 129ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 130ppp_user="root" # Which user to run ppp as 131 132### Network daemon (miscellaneous) ### 133syslogd_enable="YES" # Run syslog daemon (or NO). 134syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 135#syslogd_flags="-s" # Flags to syslogd (if enabled). 136syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 137inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 138inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 139inetd_flags="-wW" # Optional flags to inetd 140 141rwhod_enable="NO" # Run the rwho daemon (or NO). 142rwhod_flags="" # Flags for rwhod 143rarpd_enable="NO" # Run rarpd (or NO). 144rarpd_flags="" # Flags to rarpd. 145bootparamd_enable="NO" # Run bootparamd (or NO). 146bootparamd_flags="" # Flags to bootparamd 147pppoed_enable="NO" # Run the PPP over Ethernet daemon. 148pppoed_provider="*" # Provider and ppp(8) config file entry. 149pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 150pppoed_interface="fxp0" # The interface that pppoed runs on. 151sshd_enable="NO" # Enable sshd 152sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 153sshd_flags="" # Additional flags for sshd. 154 155ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). 156ftpd_flags="" # Flags for ftpd, -D added implicitly. 157 158wpa_supplicant_enable="NO" # Run wpa_supplicant. 159wpa_supplicant_program="/usr/sbin/wpa_supplicant" 160wpa_supplicant_flags="-c /etc/wpa_supplicant.conf" 161 162### Network File System (NFS): ### 163### Server-side options also need rpcbind_enable="YES" ### 164### 165### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 166### the mtime matches the data cache is left intact. 167### 168autofs_enable="NO" # Run automountd(8) 169automount_flags="" # Flags to automount(8) (if autofs enabled). 170automountd_flags="" # Flags to automountd(8) (if autofs enabled). 171autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 172nfs_client_enable="NO" # This host is an NFS client (or NO). 173nfs_access_cache="5" # Client attribute cache timeout in seconds 174#nfs_neg_cache="3" # Client attribute negative hit cache timeout 175nfs_server_enable="NO" # This host is an NFS server (or NO). 176nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 177mountd_enable="NO" # Run mountd (or NO). 178mountd_flags="-r" # Flags to mountd (if NFS server enabled). 179weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 180nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 181nfs_bufpackets="" # bufspace (in packets) for client 182rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 183rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 184rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 185rpc_statd_flags="" # Flags to rpc.statd (if enabled). 186rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 187rpcbind_enable="NO" # Run the portmapper service (YES/NO). 188rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 189rpcbind_flags="" # Flags to rpcbind (if enabled). 190rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 191keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 192keyserv_flags="" # Flags to keyserv (if enabled). 193 194### Network Time Services options: ### 195dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 196dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 197dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 198 199# Bluetooth daemons and options: 200btconfig_enable="NO" # Configure Bluetooth devices (or NO). 201btconfig_devices="" # List of Bluetooth devices (or empty for all). 202#btconfig_<device>="" # Parameters to pass to <device>. 203btconfig_args="" # Parameters to pass to all devices. 204sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). 205sdpd_flags="" # Flags to sdpd (if enabled). 206bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). 207bthcid_flags="" # Flags to bthcid (if enabled). 208 209# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 210nis_client_enable="NO" # We're an NIS client (or NO). 211nis_client_flags="" # Flags to ypbind (if enabled). 212nis_ypset_enable="NO" # Run ypset at boot time (or NO). 213nis_ypset_flags="" # Flags to ypset (if enabled). 214nis_server_enable="NO" # We're an NIS server (or NO). 215nis_server_flags="" # Flags to ypserv (if enabled). 216nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 217nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 218nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 219nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 220 221### Network routing options: ### 222defaultrouter="NO" # Set to default gateway (or NO). 223static_routes="" # Set to static route list (or leave empty). 224gateway_enable="NO" # Set to YES if this host will be a gateway. 225router_enable="NO" # Set to YES to enable a routing daemon. 226router_program="/sbin/routed" # Name of routing daemon to use if enabled. 227router_flags="-q" # Flags for routing daemon. 228arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 229forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 230accept_sourceroute="NO" # accept source routed packets to us 231 232### Miscellaneous network options: ### 233icmp_bmcastecho="NO" # respond to broadcast ping packets 234 235### IPv6 options: ### 236ipv6_enable="NO" # Set to YES to set up for IPv6. 237ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 238ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 239#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 240ipv6_static_routes="" # Set to static route list (or leave empty). 241#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 242 # route toward loopback interface. 243#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 244ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 245ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 246ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 247ipv6_router_flags="" # Flags to IPv6 routing daemon. 248#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 249 # addrs. 250#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 251 # node, you should stop advertisement. 252#ipv6_network_interfaces="ed0 ep0" # Examples for router 253 # or static configuration for end node. 254 # Choose correct prefix value. 255#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 256#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 257#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 258#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 259ipv6_default_interface="NO" # Default output interface for scoped addrs. 260 # Now this works only for IPv6 link local 261 # multicast addrs. 262rtadvd_enable="NO" # Set to YES to enable an IPv6 router 263 # advertisement daemon. If set to YES, 264 # this router becomes a possible candidate 265 # IPv6 default router for local subnets. 266rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 267rtsold_enable="NO" # Set to YES to enable an IPv6 routing 268 # solicitation daemon. This is used for 269 # automatic discovery of non-link local 270 # addresses. 271rtsold_flags="-a" # Do autoprobing of outgoing interface. 272stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 273 # tunneling interface. Specify this entry 274 # to enable 6to4 interface. 275stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 276 # to limit peer addr range. Effective value 277 # is 0-31. 278stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 279 # If you like, you can set "AUTO" for this. 280stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 281ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 282 # functionality 283ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 284ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 285ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 286ipv6_firewall_logging="NO" # Set to YES to enable events logging 287ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 288ip6addrctl_enable="YES" # Set to YES to enable default address selection 289ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 290ip6addrctl_policy="AUTO" # A pre-defined address selection policy 291 # (ipv4_prefer, ipv6_prefer, or AUTO) 292 293############################################################## 294### System console options ################################# 295############################################################## 296 297keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 298keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 299keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 300keychange="NO" # function keys default values (or NO). 301cursor="NO" # cursor type {normal|blink|destructive} (or NO). 302scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 303font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 304font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 305font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 306blanktime="300" # blank time (in seconds) or "NO" to turn it off. 307saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 308moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 309 # specifically overridden in rc.conf(5). 310moused_enable="NO" # Run the mouse daemon. 311moused_type="auto" # See man page for rc.conf(5) for available settings. 312moused_port="/dev/psm0" # Set to your mouse port. 313moused_flags="" # Any additional flags to moused. 314mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 315 # language code table, specify alternative range 316 # start like mousechar_start=3, see vidcontrol(1) 317vidhistory="" # Set video history buffer size 318allscreens_flags="" # Set this vidcontrol mode for all virtual screens 319allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 320 321 322############################################################## 323### Mail Transfer Agent (MTA) options ###################### 324############################################################## 325 326mta_start_script="/etc/rc.sendmail" 327 # Script to start your chosen MTA, called by /etc/rc. 328# Settings for /etc/rc.sendmail: 329sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 330sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 331sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 332sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 333 # Flags for localhost-only MTA 334sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 335sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 336sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 337sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 338 # Flags for sendmail_msp_queue daemon. 339sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). 340 341 342############################################################## 343### Miscellaneous administrative options ################### 344############################################################## 345 346mixer_enable="YES" # Manage mixer settings across reboots 347cron_enable="YES" # Run the periodic job daemon. 348cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 349cron_flags="" # Which options to pass to the cron daemon. 350lpd_enable="NO" # Run the line printer daemon. 351lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 352lpd_flags="" # Flags to lpd (if enabled). 353nscd_enable="NO" # Run the nsswitch caching daemon. 354devd_enable="YES" # Run devd, to trigger programs on device tree changes. 355devd_flags="" # Additional flags for devd(8). 356dumpdev="NO" # Device name to crashdump to (or NO). 357dumpdir="/var/crash" # Directory where crash dumps are to be stored 358savecore_flags="" # Used if dumpdev is enabled above, and present. 359crashinfo_enable="YES" # Automatically generate crash dump summary. 360crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 361enable_quotas="NO" # turn on quotas on startup (or NO). 362check_quotas="YES" # Check quotas on startup (or NO). 363accounting_enable="NO" # Turn on process accounting (or NO). 364sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO). 365clear_tmp_enable="NO" # Clear /tmp at startup. 366ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 367ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib" 368 # shared library search paths 369ldconfig_local_dirs="/usr/local/libdata/ldconfig" 370 # Local directories with ldconfig configuration files. 371kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 372update_motd="YES" # update version info in /etc/motd (or NO) 373start_vinum="NO" # set to YES to start vinum 374udevd_enable="NO" # Run udevd(8) daemon. 375udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm). 376lvm_enable="NO" # Run LVM volume discovery. 377entropy_dir="/var/db/entropy" # Set to NO to disable 378entropy_file="/var/db/entropy/reboot" # Set to NO to disable 379entropy_save_sz="16384" # Size of the entropy cache files (in bytes) 380rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 381dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 382newsyslog_enable="NO" # Run newsyslog at startup. 383newsyslog_flags="" # Flags to newsyslog (if enabled). 384resident_enable="NO" # Process /etc/resident.conf 385varsym_enable="NO" # Process /etc/varsym.conf 386watchdogd_enable="NO" # Start the software watchdog daemon 387 388############################################################## 389### Jail Configuration ####################################### 390############################################################## 391 392jail_enable="NO" # Set to NO to disable starting of any jails 393jail_list="" # Space separated list of names of jails 394jail_default_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 395jail_default_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 396jail_default_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 397jail_default_chflags_allow="NO" # Allow altering system files within a jail 398jail_default_raw_sockets_allow="NO" # Allow raw sockets within a jail 399jail_default_allow_listen_override="NO" # Allow overriding host wildcard listen 400 401# 402# To use rc's built-in jail infrastructure create entries for 403# each jail, specified in jail_list, with the following variables. 404# NOTES: 405# - replace 'example' with the jail's name. 406# - except rootdir, hostname and ip, all of the following variables may be made 407# global jail variables if you don't specify a jail name (ie. jail_interface). 408# 409#jail_example_rootdir="/usr/jail/default" # Jail's root directory 410#jail_example_hostname="default.domain.com" # Jail's hostname 411#jail_example_ip="192.168.0.10" # Jail's IP number 412#jail_example_interface="" # Interface to create the IP alias on 413#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 414#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 415#jail_example_procfs_enable="NO" # mount procfs in jail 416#jail_example_devfs_enable="NO" # mount devfs in jail 417#jail_example_mount_enable="NO" # mount/umount jail's fs 418#jail_example_fstab="" # fstab(5) for mount/umount 419#jail_example_flags="-l -U root" # flags for jail(8) 420 421############################################################## 422### VFS quota options ####################################### 423############################################################## 424 425vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options 426vfs_quota_sync="" # Space separated list of mount points or "NO" 427 428############################################################## 429### VKernel options ######################################### 430############################################################## 431 432vkernel_enable="NO" # Set to YES to enable starting of vkernels 433vkernel_list="" # Space separated list of names of vkernels 434#vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary 435#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued 436 437vknetd_enable="NO" # Bridged networking 438vknetd_flags="-U" # Bridged networking flags 439# 440# Create an entry for each vkernel specified in vkernel_list 441# replacing 'example' by the name of the vkernel. 442# 443#vkernel_example_bin="/boot/kernel.VKERNEL64" 444 # Path to the vkernel binary 445#vkernel_example_memsize="64m" 446 # Amount of memory for the vkernel 447#vkernel_example_rootimg_list="/var/vkernel/rootimg.01" 448 # Space separated list of disk images 449#vkernel_example_memimg="/var/vkernel/memimg.000000" 450 # Optional: Memory image file for vkernel 451#vkernel_example_iface_list="auto:bridge0" 452 # Optional: space separated list network interfaces for the vkernel 453#vkernel_example_logfile="/dev/null" 454 # Optional: path to the console log file 455#vkernel_example_user="root" 456 # Optional: user that will run the vkernel 457#vkernel_example_flags="-U" 458 # Optional: aditional flags to start the vkernel with 459#vkernel_example_kill_timeout="45" 460 # Optional: timeout before SIGKILL is issued when stopping the vkernel 461 462############################################################## 463### Define source_rc_confs, the mechanism used by /etc/rc.* ## 464### scripts to source rc_conf_files overrides safely. ## 465############################################################## 466 467if [ -z "${source_rc_confs_defined}" ]; then 468 source_rc_confs_defined=yes 469 source_rc_confs() { 470 local i sourced_files 471 for i in ${rc_conf_files}; do 472 case ${sourced_files} in 473 *:$i:*) 474 ;; 475 *) 476 sourced_files="${sourced_files}:$i:" 477 if [ -r $i ]; then 478 . $i 479 fi 480 ;; 481 esac 482 done 483 } 484fi 485