1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17# $DragonFly: src/etc/defaults/rc.conf,v 1.52 2008/10/03 00:26:21 hasso Exp $ 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23rc_debug="NO" # Set to YES to enable debugging output from rc.d 24rc_info="YES" # Enables display of informational messages at boot. 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 28apmd_enable="NO" # Run apmd to handle APM event from userland. 29apmd_flags="" # Flags to apmd (if enabled). 30battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining. 31battd_flags="" # Flags to battd (if enabled). 32sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. 33sensorsd_flags="" # additional flags for sensorsd(8). 34pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 35pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 36removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 37local_startup="/usr/pkg/etc/rc.d /usr/local/etc/rc.d /usr/X11R6/etc/rc.d" 38 # startup script dirs. 39script_name_sep=" " # Change if your startup scripts' names contain spaces 40rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 41fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 42netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 43extra_netfs_types="NO" # List of network extra filesystem types for delayed 44 # mount at startup (or NO). 45devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" 46 # Config files for devfs(5) 47 48############################################################## 49### Network configuration sub-section ###################### 50############################################################## 51 52### Basic network and firewall/security options: ### 53# 54# see 'man firewall' for an explanation of the default firewall rules 55# 56hostname="" # Set this! 57nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 58dhclient_program="/sbin/dhclient" # Path to dhcp client program. 59dhclient_flags="" # Additional flags to pass to dhcp client. 60firewall_enable="NO" # Set to YES to enable firewall functionality 61firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 62firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 63firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 64firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 65firewall_allowed_icmp_types="0 3 8 11 12 13 14" 66firewall_open_tcp_ports="22 25 53 80 113 443" 67firewall_open_udp_ports="53" 68firewall_quiet="NO" # Set to YES to suppress rule display 69firewall_logging="NO" # Set to YES to enable events logging 70firewall_flags="" # Flags passed to ipfw when type is a file 71ip_portrange_first="NO" # Set first dynamically allocated port 72ip_portrange_last="NO" # Set last dynamically allocated port 73ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 74ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 75natd_program="/sbin/natd" # path to natd, if you want a different one. 76natd_enable="NO" # Enable natd (if firewall_enable == YES). 77natd_interface="" # Public interface or IPaddress to use. 78natd_flags="" # Additional flags for natd. 79ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 80ipfilter_program="/sbin/ipf" # where the ipfilter program lives 81ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 82 # /usr/src/contrib/ipfilter/rules for examples 83ipfilter_flags="" # additional flags for ipfilter 84ipnat_enable="NO" # Set to YES to enable ipnat functionality 85ipnat_program="/sbin/ipnat" # where the ipnat program lives 86ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 87ipnat_flags="" # additional flags for ipnat 88ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 89ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 90ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 91ipfs_enable="NO" # Set to YES to enable saving and restoring 92 # of state tables at shutdown and boot 93ipfs_program="/sbin/ipfs" # where the ipfs program lives 94ipfs_flags="" # additional flags for ipfs 95pf_enable="NO" # Set to YES to enable packet filter (pf) 96pf_rules="/etc/pf.conf" # rules definition file for pf 97pf_program="/usr/sbin/pfctl" # where the pfctl program lives 98pf_flags="" # additional flags for pfctl 99pflog_enable="NO" # Set to YES to enable packet filter logging 100pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 101pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 102pflog_flags="" # additional flags for pflogd 103tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 104log_in_vain="0" # >=1 to log connects to ports w/o listeners. 105tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 106# For the following option you need to have TCP_DROP_SYNFIN set in your 107# kernel. Please refer to LINT and NOTES for details. 108tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 109 # NOTE: this violates the TCP specification 110icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 111icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 112network_interfaces="auto" # List of network interfaces (or "auto"). 113cloned_interfaces="" # List of cloned network interfaces to create. 114#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 115ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 116#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 117#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 118#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 119# 120# If you have any sppp(4) interfaces above, you might also want to set 121# the following parameters. Refer to spppcontrol(8) for their meaning. 122sppp_interfaces="" # List of sppp interfaces. 123#sppp_interfaces="isp0" # example: sppp over ISDN 124#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 125gif_interfaces="NO" # List of GIF tunnels (or "NO"). 126#gif_interfaces="gif0 gif1" # Examples typically for a router. 127 # Choose correct tunnel addrs. 128#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 129#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 130 131# User ppp configuration. 132ppp_enable="NO" # Start user-ppp (or NO). 133ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 134 # For details see man page for ppp(8). Default is auto. 135ppp_nat="YES" # Use PPP's internal network address translation or NO. 136ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 137ppp_user="root" # Which user to run ppp as 138 139### Network daemon (miscellaneous) ### 140hostapd_enable="NO" # Run hostap daemon. 141syslogd_enable="YES" # Run syslog daemon (or NO). 142syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 143#syslogd_flags="-s" # Flags to syslogd (if enabled). 144syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 145inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 146inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 147inetd_flags="-wW" # Optional flags to inetd 148# 149# named. It may be possible to run named in a sandbox, man security for 150# details. Note: when named_chrootdir is specified, RCNG automatically 151# adds '-u bind'. 152# 153named_enable="NO" # Run named, the DNS server (or NO). 154named_program="/usr/sbin/named" # path to named, if you want a different one. 155named_pidfile="/var/run/named.pid" # Pid file 156named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it) 157 158rwhod_enable="NO" # Run the rwho daemon (or NO). 159rwhod_flags="" # Flags for rwhod 160rarpd_enable="NO" # Run rarpd (or NO). 161rarpd_flags="" # Flags to rarpd. 162bootparamd_enable="NO" # Run bootparamd (or NO). 163bootparamd_flags="" # Flags to bootparamd 164pppoed_enable="NO" # Run the PPP over Ethernet daemon. 165pppoed_provider="*" # Provider and ppp(8) config file entry. 166pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 167pppoed_interface="fxp0" # The interface that pppoed runs on. 168sshd_enable="NO" # Enable sshd 169sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 170sshd_flags="" # Additional flags for sshd. 171 172ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). 173ftpd_flags="" # Flags for ftpd, -D added implicitly. 174 175### Network File System (NFS): ### 176### Server-side options also need rpcbind_enable="YES" ### 177### 178### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 179### the mtime matches the data cache is left intact. 180### 181amd_enable="NO" # Run amd service with $amd_flags (or NO). 182amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 183amd_map_program="NO" # Can be set to "ypcat -k amd.master" 184nfs_client_enable="NO" # This host is an NFS client (or NO). 185nfs_access_cache="5" # Client attribute cache timeout in seconds 186#nfs_neg_cache="3" # Client attribute negative hit cache timeout 187nfs_server_enable="NO" # This host is an NFS server (or NO). 188nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 189mountd_enable="NO" # Run mountd (or NO). 190mountd_flags="-r" # Flags to mountd (if NFS server enabled). 191weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 192nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 193nfs_bufpackets="" # bufspace (in packets) for client 194rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 195rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 196rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 197rpc_statd_flags="" # Flags to rpc.statd (if enabled). 198rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 199rpcbind_enable="NO" # Run the portmapper service (YES/NO). 200rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 201rpcbind_flags="" # Flags to rpcbind (if enabled). 202rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 203keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 204keyserv_flags="" # Flags to keyserv (if enabled). 205 206### Network Time Services options: ### 207timed_enable="NO" # Run the time daemon (or NO). 208timed_flags="" # Flags to timed (if enabled). 209dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 210dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 211dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 212 213# Bluetooth deamons and options: 214btconfig_enable="NO" # Configure Bluetooth devices (or NO). 215btconfig_devices="" # List of Bluetooth devices (or empty for all). 216#btconfig_<device>="" # Parameters to pass to <device>. 217btconfig_args="" # Parameters to pass to all devices. 218sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). 219sdpd_flags="" # Flags to sdpd (if enabled). 220bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). 221bthcid_flags="" # Flags to bthcid (if enabled). 222 223# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 224nis_client_enable="NO" # We're an NIS client (or NO). 225nis_client_flags="" # Flags to ypbind (if enabled). 226nis_ypset_enable="NO" # Run ypset at boot time (or NO). 227nis_ypset_flags="" # Flags to ypset (if enabled). 228nis_server_enable="NO" # We're an NIS server (or NO). 229nis_server_flags="" # Flags to ypserv (if enabled). 230nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 231nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 232nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 233nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 234 235### Network routing options: ### 236defaultrouter="NO" # Set to default gateway (or NO). 237static_routes="" # Set to static route list (or leave empty). 238gateway_enable="NO" # Set to YES if this host will be a gateway. 239router_enable="NO" # Set to YES to enable a routing daemon. 240router_program="/sbin/routed" # Name of routing daemon to use if enabled. 241router_flags="-q" # Flags for routing daemon. 242mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 243mrouted_flags="" # Flags for multicast routing daemon. 244ipxgateway_enable="NO" # Set to YES to enable IPX routing. 245ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 246ipxrouted_flags="" # Flags for IPX routing daemon. 247arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 248forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 249accept_sourceroute="NO" # accept source routed packets to us 250 251### ATM interface options: ### 252atm_enable="NO" # Configure ATM interfaces (or NO). 253#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 254#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 255#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 256#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 257#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 258#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 259atm_arps="" # Set to permanent ARP list (or leave empty). 260 261### ISDN interface options: (see also: /usr/share/examples/isdn) ### 262isdn_enable="NO" # Enable the ISDN subsystem (or NO). 263isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 264isdn_flags="-dn -d0x1f9" # Flags for isdnd 265isdn_ttype="cons25" # terminal type for fullscreen mode 266isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 267isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 268isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 269 270### Miscellaneous network options: ### 271icmp_bmcastecho="NO" # respond to broadcast ping packets 272 273### IPv6 options: ### 274ipv6_enable="NO" # Set to YES to set up for IPv6. 275ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 276ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 277#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 278ipv6_static_routes="" # Set to static route list (or leave empty). 279#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 280 # route toward loopback interface. 281#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 282ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 283ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 284ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 285ipv6_router_flags="" # Flags to IPv6 routing daemon. 286#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 287 # addrs. 288#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 289 # node, you should stop advertisement. 290#ipv6_network_interfaces="ed0 ep0" # Examples for router 291 # or static configuration for end node. 292 # Choose correct prefix value. 293#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 294#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 295#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 296#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 297ipv6_default_interface="NO" # Default output interface for scoped addrs. 298 # Now this works only for IPv6 link local 299 # multicast addrs. 300rtadvd_enable="NO" # Set to YES to enable an IPv6 router 301 # advertisement daemon. If set to YES, 302 # this router becomes a possible candidate 303 # IPv6 default router for local subnets. 304rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 305rtsold_enable="NO" # Set to YES to enable an IPv6 routing 306 # solicitation daemon. This is used for 307 # automatic discovery of non-link local 308 # addresses. 309rtsold_flags="-a" # Do autoprobing of outgoing interface. 310mroute6d_enable="NO" # Do IPv6 multicast routing. 311mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 312 # routing daemon. You need to 313 # install it from package or 314 # port. 315mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 316stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 317 # tunneling interface. Specify this entry 318 # to enable 6to4 interface. 319stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 320 # to limit peer addr range. Effective value 321 # is 0-31. 322stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 323 # If you like, you can set "AUTO" for this. 324stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 325ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 326 # IPv6-to-IPv4 TCP translator. You also need 327 # faithd(8) setup. 328ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 329 # communication. (like ::ffff:a.b.c.d) 330ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 331 # functionality 332ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 333ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 334ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 335ipv6_firewall_logging="NO" # Set to YES to enable events logging 336ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 337ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 338 # see /usr/src/contrib/ipfilter/rules 339 # for examples 340 341############################################################## 342### System console options ################################# 343############################################################## 344 345keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 346keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 347keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 348keychange="NO" # function keys default values (or NO). 349cursor="NO" # cursor type {normal|blink|destructive} (or NO). 350scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 351font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 352font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 353font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 354blanktime="300" # blank time (in seconds) or "NO" to turn it off. 355saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 356moused_enable="NO" # Run the mouse daemon. 357moused_type="auto" # See man page for rc.conf(5) for available settings. 358moused_port="/dev/psm0" # Set to your mouse port. 359moused_flags="" # Any additional flags to moused. 360mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 361 # language code table, specify alternative range 362 # start like mousechar_start=3, see vidcontrol(1) 363vidhistory="" # Set video history buffer size 364allscreens_flags="" # Set this vidcontrol mode for all virtual screens 365allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 366 367 368############################################################## 369### Mail Transfer Agent (MTA) options ###################### 370############################################################## 371 372mta_start_script="/etc/rc.sendmail" 373 # Script to start your chosen MTA, called by /etc/rc. 374# Settings for /etc/rc.sendmail: 375sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 376sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 377sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 378sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 379 # Flags for localhost-only MTA 380sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 381sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 382sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 383sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 384 # Flags for sendmail_msp_queue daemon. 385sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). 386 387 388############################################################## 389### Miscellaneous administrative options ################### 390############################################################## 391 392mixer_enable="NO" # Manage mixer settings across reboots 393cron_enable="YES" # Run the periodic job daemon. 394cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 395cron_flags="" # Which options to pass to the cron daemon. 396lpd_enable="NO" # Run the line printer daemon. 397lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 398lpd_flags="" # Flags to lpd (if enabled). 399nscd_enable="NO" # Run the nsswitch caching daemon. 400usbd_enable="NO" # Run the usbd daemon. 401usbd_flags="" # Flags to usbd (if enabled). 402devd_enable="NO" # Rund devd(8) daemon. 403devd_flags="" # Flags to devd(8) (if enabled). 404dumpdev="NO" # Device name to crashdump to (or NO). 405dumpdir="/var/crash" # Directory where crash dumps are to be stored 406savecore_flags="" # Used if dumpdev is enabled above, and present. 407enable_quotas="NO" # turn on quotas on startup (or NO). 408check_quotas="YES" # Check quotas on startup (or NO). 409accounting_enable="NO" # Turn on process accounting (or NO). 410sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 411linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 412clear_tmp_enable="NO" # Clear /tmp at startup. 413ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 414ldconfig_paths="/usr/lib /usr/lib/gcc* /usr/lib/compat /usr/pkg/lib /usr/local/lib" 415 # shared library search paths 416kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 417update_motd="YES" # update version info in /etc/motd (or NO) 418start_vinum="NO" # set to YES to start vinum 419rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 420dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 421newsyslog_enable="NO" # Run newsyslog at startup. 422newsyslog_flags="" # Flags to newsyslog (if enabled). 423resident_enable="NO" # Process /etc/resident.conf 424varsym_enable="NO" # Process /etc/varsym.conf 425watchdogd_enable="NO" # Start the software watchdog daemon 426 427############################################################## 428### Jail Configuration ####################################### 429############################################################## 430 431jail_enable="NO" # Set to NO to disable starting of any jails 432jail_list="" # Space separated list of names of jails 433jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 434jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 435jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 436 437# 438# To use rc's built-in jail infrastructure create entries for 439# each jail, specified in jail_list, with the following variables. 440# NOTES: 441# - replace 'example' with the jail's name. 442# - except rootdir, hostname and ip, all of the following variables may be made 443# global jail variables if you don't specify a jail name (ie. jail_interface). 444# 445#jail_example_rootdir="/usr/jail/default" # Jail's root directory 446#jail_example_hostname="default.domain.com" # Jail's hostname 447#jail_example_ip="192.168.0.10" # Jail's IP number 448#jail_example_interface="" # Interface to create the IP alias on 449#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 450#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 451#jail_example_fdesc_enable="NO" # mount fdesc in the jail 452#jail_example_procfs_enable="NO" # mount procfs in jail 453#jail_example_mount_enable="NO" # mount/umount jail's fs 454#jail_example_fstab="" # fstab(5) for mount/umount 455#jail_example_flags="-l -U root" # flags for jail(8) 456 457############################################################## 458### Define source_rc_confs, the mechanism used by /etc/rc.* ## 459### scripts to source rc_conf_files overrides safely. ## 460############################################################## 461 462if [ -z "${source_rc_confs_defined}" ]; then 463 source_rc_confs_defined=yes 464 source_rc_confs () { 465 local i sourced_files 466 for i in ${rc_conf_files}; do 467 case ${sourced_files} in 468 *:$i:*) 469 ;; 470 *) 471 sourced_files="${sourced_files}:$i:" 472 if [ -r $i ]; then 473 . $i 474 fi 475 ;; 476 esac 477 done 478 } 479fi 480