1#!/bin/sh 2 3# This is rc.conf - a file full of useful variables that you can set 4# to change the default startup behavior of your system. You should 5# not edit this file! Put any overrides into one of the ${rc_conf_files} 6# instead and you will be able to update these defaults later without 7# spamming your local configuration information. 8# 9# The ${rc_conf_files} files should only contain values which override 10# values set in this file. This eases the upgrade path when defaults 11# are changed and new features are added. 12# 13# All arguments must be in double or single quotes. 14# 15# For a more detailed explanation of all the rc.conf variables, please 16# refer to the rc.conf(5) manual page. 17# 18# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 19 20############################################################## 21### Important initial Boot-time options #################### 22############################################################## 23 24rc_debug="NO" # Set to YES to enable debugging output from rc.d 25rc_info="YES" # Enables display of informational messages at boot. 26rc_startmsgs="YES" # Show "Starting foo:" messages at boot 27rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 28swapfile="NO" # Set to name of swapfile if aux swapfile desired. 29powerd_enable="NO" # Run powerd to adjust CPU speed. 30powerd_flags="" # additional flags for powerd(8). 31sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. 32sensorsd_flags="" # additional flags for sensorsd(8). 33hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging. 34hotplugd_flags="" # additional flags for hotplugd(8) 35pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 36pccard_ether_delay="5" # Delay before trying to start DHCP client in pccard_ether 37removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 38local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d" 39 # startup script dirs. 40script_name_sep=" " # Change if your startup scripts' names contain spaces 41rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 42fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 43netfs_types="nfs:NFS smbfs:SMB" # Net filesystems. 44extra_netfs_types="NO" # List of network extra filesystem types for delayed 45 # mount at startup (or NO). 46devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" 47 # Config files for devfs(5) 48tmpfs_var_run="NO" # Set to YES to mount a tmpfs(5) at /var/run 49tmpfs_tmp="NO" # Set to YES to mount a tmpfs(5) at /tmp 50 51############################################################## 52### Network configuration sub-section ###################### 53############################################################## 54 55### Basic network and firewall/security options: ### 56# 57# see 'man firewall' for an explanation of the default firewall rules 58# 59hostname="" # Set this! 60nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 61dhcp_client="dhclient" # Name of the rc script that is called to start 62 # the DHCP client, e.g., "dhcpcd" or "dhclient" 63dhcpcd_enable="NO" # Set to YES to run dhcpcd in master mode. 64dhcpcd_program="/sbin/dhcpcd" 65dhcpcd_flags="-b" 66dhclient_program="/sbin/dhclient" # Path to dhcp client program. 67dhclient_flags="-w" # Additional flags to pass to dhcp client. 68firewall_enable="NO" # Set to YES to enable firewall functionality 69firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 70firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 71firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 72firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 73firewall_allowed_icmp_types="0 3 8 11 12 13 14" 74firewall_open_tcp_ports="22 25 53 80 113 443" 75firewall_open_udp_ports="53" 76firewall_quiet="NO" # Set to YES to suppress rule display 77firewall_logging="NO" # Set to YES to enable events logging 78firewall_flags="" # Flags passed to ipfw when type is a file 79ipfw3_enable="NO" # Set to YES to enable ipfw3(8) firewall 80ipfw3_program="/sbin/ipfw3" # where the ipfw3 program lives 81ipfw3_script="/etc/ipfw3.rules" # Script to run to set up the firewall rules 82ipfw3_modules="ipfw3 ipfw3_basic" # IPFW3 modules to be loaded 83ip_portrange_first="NO" # Set first dynamically allocated port 84ip_portrange_last="NO" # Set last dynamically allocated port 85natd_program="/sbin/natd" # path to natd, if you want a different one. 86natd_enable="NO" # Enable natd (if firewall_enable == YES). 87natd_interface="" # Public interface or IPaddress to use. 88natd_flags="" # Additional flags for natd. 89pf_enable="NO" # Set to YES to enable packet filter (pf) 90pf_rules="/etc/pf.conf" # rules definition file for pf 91pf_program="/usr/sbin/pfctl" # where the pfctl program lives 92pf_flags="" # additional flags for pfctl 93pflog_enable="NO" # Set to YES to enable packet filter logging 94pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 95pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 96pflog_flags="" # additional flags for pflogd 97tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 98log_in_vain="0" # >=1 to log connects to ports w/o listeners. 99tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 100# For the following option you need to have TCP_DROP_SYNFIN set in your 101# kernel. Please refer to LINT64 details. 102tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 103 # NOTE: this violates the TCP specification 104icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 105icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 106netif_enable="YES" # Set to NO to not configure network interfaces. 107network_interfaces="auto" # List of network interfaces (or "auto"). 108cloned_interfaces="" # List of cloned network interfaces to create. 109#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning X86_64_GENERIC config. 110ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 111#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 112#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 113# 114# If you have any sppp(4) interfaces above, you might also want to set 115# the following parameters. Refer to spppcontrol(8) for their meaning. 116sppp_interfaces="" # List of sppp interfaces. 117#sppp_interfaces="...0" # example: sppp over ... 118#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 119gif_interfaces="NO" # List of GIF tunnels (or "NO"). 120#gif_interfaces="gif0 gif1" # Examples typically for a router. 121 # Choose correct tunnel addrs. 122#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 123#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 124 125# User ppp configuration. 126ppp_enable="NO" # Start user-ppp (or NO). 127ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 128 # For details see man page for ppp(8). Default is auto. 129ppp_nat="YES" # Use PPP's internal network address translation or NO. 130ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 131ppp_user="root" # Which user to run ppp as 132 133### Network daemon (miscellaneous) ### 134syslogd_enable="YES" # Run syslog daemon (or NO). 135syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 136#syslogd_flags="-s" # Flags to syslogd (if enabled). 137syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 138inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 139inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 140inetd_flags="-wW" # Optional flags to inetd 141 142rwhod_enable="NO" # Run the rwho daemon (or NO). 143rwhod_flags="" # Flags for rwhod 144rarpd_enable="NO" # Run rarpd (or NO). 145rarpd_flags="" # Flags to rarpd. 146bootparamd_enable="NO" # Run bootparamd (or NO). 147bootparamd_flags="" # Flags to bootparamd 148pppoed_enable="NO" # Run the PPP over Ethernet daemon. 149pppoed_provider="*" # Provider and ppp(8) config file entry. 150pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 151pppoed_interface="fxp0" # The interface that pppoed runs on. 152sshd_enable="NO" # Enable sshd 153sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 154sshd_flags="" # Additional flags for sshd. 155 156ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). 157ftpd_flags="" # Flags for ftpd, -D added implicitly. 158 159wpa_supplicant_enable="NO" # Run wpa_supplicant. 160wpa_supplicant_program="/usr/sbin/wpa_supplicant" 161wpa_supplicant_flags="-c /etc/wpa_supplicant.conf" 162 163### Network File System (NFS): ### 164### Server-side options also need rpcbind_enable="YES" ### 165### 166### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 167### the mtime matches the data cache is left intact. 168### 169autofs_enable="NO" # Run automountd(8) 170automount_flags="" # Flags to automount(8) (if autofs enabled). 171automountd_flags="" # Flags to automountd(8) (if autofs enabled). 172autounmountd_flags="" # Flags to autounmountd(8) (if autofs enabled). 173nfs_client_enable="NO" # This host is an NFS client (or NO). 174nfs_access_cache="5" # Client attribute cache timeout in seconds 175#nfs_neg_cache="3" # Client attribute negative hit cache timeout 176nfs_server_enable="NO" # This host is an NFS server (or NO). 177nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 178mountd_enable="NO" # Run mountd (or NO). 179mountd_flags="-r" # Flags to mountd (if NFS server enabled). 180weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 181nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 182nfs_bufpackets="" # bufspace (in packets) for client 183rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 184rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 185rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 186rpc_statd_flags="" # Flags to rpc.statd (if enabled). 187rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 188rpcbind_enable="NO" # Run the portmapper service (YES/NO). 189rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 190rpcbind_flags="" # Flags to rpcbind (if enabled). 191rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 192keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 193keyserv_flags="" # Flags to keyserv (if enabled). 194 195### Network Time Services options: ### 196dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 197dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 198dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 199 200# Bluetooth deamons and options: 201btconfig_enable="NO" # Configure Bluetooth devices (or NO). 202btconfig_devices="" # List of Bluetooth devices (or empty for all). 203#btconfig_<device>="" # Parameters to pass to <device>. 204btconfig_args="" # Parameters to pass to all devices. 205sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). 206sdpd_flags="" # Flags to sdpd (if enabled). 207bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). 208bthcid_flags="" # Flags to bthcid (if enabled). 209 210# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 211nis_client_enable="NO" # We're an NIS client (or NO). 212nis_client_flags="" # Flags to ypbind (if enabled). 213nis_ypset_enable="NO" # Run ypset at boot time (or NO). 214nis_ypset_flags="" # Flags to ypset (if enabled). 215nis_server_enable="NO" # We're an NIS server (or NO). 216nis_server_flags="" # Flags to ypserv (if enabled). 217nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 218nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 219nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 220nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 221 222### Network routing options: ### 223defaultrouter="NO" # Set to default gateway (or NO). 224static_routes="" # Set to static route list (or leave empty). 225gateway_enable="NO" # Set to YES if this host will be a gateway. 226router_enable="NO" # Set to YES to enable a routing daemon. 227router_program="/sbin/routed" # Name of routing daemon to use if enabled. 228router_flags="-q" # Flags for routing daemon. 229arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 230forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 231accept_sourceroute="NO" # accept source routed packets to us 232 233### Miscellaneous network options: ### 234icmp_bmcastecho="NO" # respond to broadcast ping packets 235 236### IPv6 options: ### 237ipv6_enable="NO" # Set to YES to set up for IPv6. 238ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 239ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 240#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 241ipv6_static_routes="" # Set to static route list (or leave empty). 242#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 243 # route toward loopback interface. 244#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 245ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 246ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 247ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 248ipv6_router_flags="" # Flags to IPv6 routing daemon. 249#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 250 # addrs. 251#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 252 # node, you should stop advertisement. 253#ipv6_network_interfaces="ed0 ep0" # Examples for router 254 # or static configuration for end node. 255 # Choose correct prefix value. 256#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 257#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 258#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 259#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 260ipv6_default_interface="NO" # Default output interface for scoped addrs. 261 # Now this works only for IPv6 link local 262 # multicast addrs. 263rtadvd_enable="NO" # Set to YES to enable an IPv6 router 264 # advertisement daemon. If set to YES, 265 # this router becomes a possible candidate 266 # IPv6 default router for local subnets. 267rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 268rtsold_enable="NO" # Set to YES to enable an IPv6 routing 269 # solicitation daemon. This is used for 270 # automatic discovery of non-link local 271 # addresses. 272rtsold_flags="-a" # Do autoprobing of outgoing interface. 273stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 274 # tunneling interface. Specify this entry 275 # to enable 6to4 interface. 276stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 277 # to limit peer addr range. Effective value 278 # is 0-31. 279stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 280 # If you like, you can set "AUTO" for this. 281stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 282ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 283 # functionality 284ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 285ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 286ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 287ipv6_firewall_logging="NO" # Set to YES to enable events logging 288ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 289ip6addrctl_enable="YES" # Set to YES to enable default address selection 290ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages 291ip6addrctl_policy="AUTO" # A pre-defined address selection policy 292 # (ipv4_prefer, ipv6_prefer, or AUTO) 293 294############################################################## 295### System console options ################################# 296############################################################## 297 298keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 299keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 300keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 301keychange="NO" # function keys default values (or NO). 302cursor="NO" # cursor type {normal|blink|destructive} (or NO). 303scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 304font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 305font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 306font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 307blanktime="300" # blank time (in seconds) or "NO" to turn it off. 308saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 309moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 310 # specifically overridden in rc.conf(5). 311moused_enable="NO" # Run the mouse daemon. 312moused_type="auto" # See man page for rc.conf(5) for available settings. 313moused_port="/dev/psm0" # Set to your mouse port. 314moused_flags="" # Any additional flags to moused. 315mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 316 # language code table, specify alternative range 317 # start like mousechar_start=3, see vidcontrol(1) 318vidhistory="" # Set video history buffer size 319allscreens_flags="" # Set this vidcontrol mode for all virtual screens 320allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 321 322 323############################################################## 324### Mail Transfer Agent (MTA) options ###################### 325############################################################## 326 327mta_start_script="/etc/rc.sendmail" 328 # Script to start your chosen MTA, called by /etc/rc. 329# Settings for /etc/rc.sendmail: 330sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 331sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 332sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 333sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 334 # Flags for localhost-only MTA 335sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 336sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 337sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 338sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 339 # Flags for sendmail_msp_queue daemon. 340sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). 341 342 343############################################################## 344### Miscellaneous administrative options ################### 345############################################################## 346 347mixer_enable="YES" # Manage mixer settings across reboots 348cron_enable="YES" # Run the periodic job daemon. 349cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 350cron_flags="" # Which options to pass to the cron daemon. 351lpd_enable="NO" # Run the line printer daemon. 352lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 353lpd_flags="" # Flags to lpd (if enabled). 354nscd_enable="NO" # Run the nsswitch caching daemon. 355devd_enable="YES" # Run devd, to trigger programs on device tree changes. 356devd_flags="" # Additional flags for devd(8). 357dumpdev="NO" # Device name to crashdump to (or NO). 358dumpdir="/var/crash" # Directory where crash dumps are to be stored 359savecore_flags="" # Used if dumpdev is enabled above, and present. 360crashinfo_enable="YES" # Automatically generate crash dump summary. 361crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 362enable_quotas="NO" # turn on quotas on startup (or NO). 363check_quotas="YES" # Check quotas on startup (or NO). 364accounting_enable="NO" # Turn on process accounting (or NO). 365sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO). 366clear_tmp_enable="NO" # Clear /tmp at startup. 367ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 368ldconfig_paths="/lib /usr/lib /usr/local/lib /usr/pkg/lib" 369 # shared library search paths 370ldconfig_local_dirs="/usr/local/libdata/ldconfig" 371 # Local directories with ldconfig configuration files. 372kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 373update_motd="YES" # update version info in /etc/motd (or NO) 374start_vinum="NO" # set to YES to start vinum 375udevd_enable="NO" # Run udevd(8) daemon. 376udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm). 377lvm_enable="NO" # Run LVM volume discovery. 378entropy_dir="/var/db/entropy" # Set to NO to disable 379entropy_file="/var/db/entropy/reboot" # Set to NO to disable 380entropy_save_sz="16384" # Size of the entropy cache files (in bytes) 381rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 382dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 383newsyslog_enable="NO" # Run newsyslog at startup. 384newsyslog_flags="" # Flags to newsyslog (if enabled). 385resident_enable="NO" # Process /etc/resident.conf 386varsym_enable="NO" # Process /etc/varsym.conf 387watchdogd_enable="NO" # Start the software watchdog daemon 388 389############################################################## 390### Jail Configuration ####################################### 391############################################################## 392 393jail_enable="NO" # Set to NO to disable starting of any jails 394jail_list="" # Space separated list of names of jails 395jail_default_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 396jail_default_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 397jail_default_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 398jail_default_chflags_allow="NO" # Allow altering system files within a jail 399jail_default_raw_sockets_allow="NO" # Allow raw sockets within a jail 400jail_default_allow_listen_override="NO" # Allow overriding host wildcard listen 401 402# 403# To use rc's built-in jail infrastructure create entries for 404# each jail, specified in jail_list, with the following variables. 405# NOTES: 406# - replace 'example' with the jail's name. 407# - except rootdir, hostname and ip, all of the following variables may be made 408# global jail variables if you don't specify a jail name (ie. jail_interface). 409# 410#jail_example_rootdir="/usr/jail/default" # Jail's root directory 411#jail_example_hostname="default.domain.com" # Jail's hostname 412#jail_example_ip="192.168.0.10" # Jail's IP number 413#jail_example_interface="" # Interface to create the IP alias on 414#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 415#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 416#jail_example_procfs_enable="NO" # mount procfs in jail 417#jail_example_devfs_enable="NO" # mount devfs in jail 418#jail_example_mount_enable="NO" # mount/umount jail's fs 419#jail_example_fstab="" # fstab(5) for mount/umount 420#jail_example_flags="-l -U root" # flags for jail(8) 421 422############################################################## 423### VFS quota options ####################################### 424############################################################## 425 426vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options 427vfs_quota_sync="" # Space separated list of mount points or "NO" 428 429############################################################## 430### VKernel options ######################################### 431############################################################## 432 433vkernel_enable="NO" # Set to YES to enable starting of vkernels 434vkernel_list="" # Space separated list of names of vkernels 435#vkernel_bin="/boot/kernel.VKERNEL64" # Default path to the vkernel binary 436#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued 437 438vknetd_enable="NO" # Bridged networking 439vknetd_flags="-U" # Bridged networking flags 440# 441# Create an entry for each vkernel specified in vkernel_list 442# replacing 'example' by the name of the vkernel. 443# 444#vkernel_example_bin="/boot/kernel.VKERNEL64" 445 # Path to the vkernel binary 446#vkernel_example_memsize="64m" 447 # Amount of memory for the vkernel 448#vkernel_example_rootimg_list="/var/vkernel/rootimg.01" 449 # Space separated list of disk images 450#vkernel_example_memimg="/var/vkernel/memimg.000000" 451 # Optional: Memory image file for vkernel 452#vkernel_example_iface_list="auto:bridge0" 453 # Optional: space separated list network interfaces for the vkernel 454#vkernel_example_logfile="/dev/null" 455 # Optional: path to the console log file 456#vkernel_example_user="root" 457 # Optional: user that will run the vkernel 458#vkernel_example_flags="-U" 459 # Optional: aditional flags to start the vkernel with 460#vkernel_example_kill_timeout="45" 461 # Optional: timeout before SIGKILL is issued when stopping the vkernel 462 463############################################################## 464### Define source_rc_confs, the mechanism used by /etc/rc.* ## 465### scripts to source rc_conf_files overrides safely. ## 466############################################################## 467 468if [ -z "${source_rc_confs_defined}" ]; then 469 source_rc_confs_defined=yes 470 source_rc_confs() { 471 local i sourced_files 472 for i in ${rc_conf_files}; do 473 case ${sourced_files} in 474 *:$i:*) 475 ;; 476 *) 477 sourced_files="${sourced_files}:$i:" 478 if [ -r $i ]; then 479 . $i 480 fi 481 ;; 482 esac 483 done 484 } 485fi 486