1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_debug="NO" # Set to YES to enable debugging output from rc.d 23rc_info="YES" # Enables display of informational messages at boot. 24rc_startmsgs="YES" # Show "Starting foo:" messages at boot 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 28apmd_enable="NO" # Run apmd to handle APM event from userland. 29apmd_flags="" # Flags to apmd (if enabled). 30battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining. 31battd_flags="" # Flags to battd (if enabled). 32powerd_enable="NO" # Run powerd to adjust CPU speed. 33sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. 34sensorsd_flags="" # additional flags for sensorsd(8). 35hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging. 36hotplugd_flags="" # additional flags for hotplugd(8) 37pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 38pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 39removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 40local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d" 41 # startup script dirs. 42script_name_sep=" " # Change if your startup scripts' names contain spaces 43rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 44fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 45netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL" # Net filesystems. 46extra_netfs_types="NO" # List of network extra filesystem types for delayed 47 # mount at startup (or NO). 48devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" 49 # Config files for devfs(5) 50 51############################################################## 52### Network configuration sub-section ###################### 53############################################################## 54 55### Basic network and firewall/security options: ### 56# 57# see 'man firewall' for an explanation of the default firewall rules 58# 59hostname="" # Set this! 60nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 61dhclient_program="/sbin/dhclient" # Path to dhcp client program. 62dhclient_flags="-w" # Additional flags to pass to dhcp client. 63firewall_enable="NO" # Set to YES to enable firewall functionality 64firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 65firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 66firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 67firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 68firewall_allowed_icmp_types="0 3 8 11 12 13 14" 69firewall_open_tcp_ports="22 25 53 80 113 443" 70firewall_open_udp_ports="53" 71firewall_quiet="NO" # Set to YES to suppress rule display 72firewall_logging="NO" # Set to YES to enable events logging 73firewall_flags="" # Flags passed to ipfw when type is a file 74ip_portrange_first="NO" # Set first dynamically allocated port 75ip_portrange_last="NO" # Set last dynamically allocated port 76ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 77ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 78natd_program="/sbin/natd" # path to natd, if you want a different one. 79natd_enable="NO" # Enable natd (if firewall_enable == YES). 80natd_interface="" # Public interface or IPaddress to use. 81natd_flags="" # Additional flags for natd. 82pf_enable="NO" # Set to YES to enable packet filter (pf) 83pf_rules="/etc/pf.conf" # rules definition file for pf 84pf_program="/usr/sbin/pfctl" # where the pfctl program lives 85pf_flags="" # additional flags for pfctl 86pflog_enable="NO" # Set to YES to enable packet filter logging 87pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 88pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 89pflog_flags="" # additional flags for pflogd 90tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 91log_in_vain="0" # >=1 to log connects to ports w/o listeners. 92tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 93# For the following option you need to have TCP_DROP_SYNFIN set in your 94# kernel. Please refer to LINT and NOTES for details. 95tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 96 # NOTE: this violates the TCP specification 97icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 98icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 99network_interfaces="auto" # List of network interfaces (or "auto"). 100cloned_interfaces="" # List of cloned network interfaces to create. 101#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 102ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 103#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 104#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 105# 106# If you have any sppp(4) interfaces above, you might also want to set 107# the following parameters. Refer to spppcontrol(8) for their meaning. 108sppp_interfaces="" # List of sppp interfaces. 109#sppp_interfaces="...0" # example: sppp over ... 110#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 111gif_interfaces="NO" # List of GIF tunnels (or "NO"). 112#gif_interfaces="gif0 gif1" # Examples typically for a router. 113 # Choose correct tunnel addrs. 114#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 115#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 116 117# User ppp configuration. 118ppp_enable="NO" # Start user-ppp (or NO). 119ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 120 # For details see man page for ppp(8). Default is auto. 121ppp_nat="YES" # Use PPP's internal network address translation or NO. 122ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 123ppp_user="root" # Which user to run ppp as 124 125### Network daemon (miscellaneous) ### 126hostapd_enable="NO" # Run hostap daemon. 127syslogd_enable="YES" # Run syslog daemon (or NO). 128syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 129#syslogd_flags="-s" # Flags to syslogd (if enabled). 130syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 131inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 132inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 133inetd_flags="-wW" # Optional flags to inetd 134 135rwhod_enable="NO" # Run the rwho daemon (or NO). 136rwhod_flags="" # Flags for rwhod 137rarpd_enable="NO" # Run rarpd (or NO). 138rarpd_flags="" # Flags to rarpd. 139bootparamd_enable="NO" # Run bootparamd (or NO). 140bootparamd_flags="" # Flags to bootparamd 141pppoed_enable="NO" # Run the PPP over Ethernet daemon. 142pppoed_provider="*" # Provider and ppp(8) config file entry. 143pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 144pppoed_interface="fxp0" # The interface that pppoed runs on. 145sshd_enable="NO" # Enable sshd 146sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 147sshd_flags="" # Additional flags for sshd. 148 149ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). 150ftpd_flags="" # Flags for ftpd, -D added implicitly. 151 152### Network File System (NFS): ### 153### Server-side options also need rpcbind_enable="YES" ### 154### 155### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 156### the mtime matches the data cache is left intact. 157### 158amd_enable="NO" # Run amd service with $amd_flags (or NO). 159amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 160amd_map_program="NO" # Can be set to "ypcat -k amd.master" 161nfs_client_enable="NO" # This host is an NFS client (or NO). 162nfs_access_cache="5" # Client attribute cache timeout in seconds 163#nfs_neg_cache="3" # Client attribute negative hit cache timeout 164nfs_server_enable="NO" # This host is an NFS server (or NO). 165nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 166mountd_enable="NO" # Run mountd (or NO). 167mountd_flags="-r" # Flags to mountd (if NFS server enabled). 168weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 169nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 170nfs_bufpackets="" # bufspace (in packets) for client 171rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 172rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 173rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 174rpc_statd_flags="" # Flags to rpc.statd (if enabled). 175rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 176rpcbind_enable="NO" # Run the portmapper service (YES/NO). 177rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 178rpcbind_flags="" # Flags to rpcbind (if enabled). 179rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 180keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 181keyserv_flags="" # Flags to keyserv (if enabled). 182 183### Network Time Services options: ### 184timed_enable="NO" # Run the time daemon (or NO). 185timed_flags="" # Flags to timed (if enabled). 186dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 187dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 188dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 189 190# Bluetooth deamons and options: 191btconfig_enable="NO" # Configure Bluetooth devices (or NO). 192btconfig_devices="" # List of Bluetooth devices (or empty for all). 193#btconfig_<device>="" # Parameters to pass to <device>. 194btconfig_args="" # Parameters to pass to all devices. 195sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). 196sdpd_flags="" # Flags to sdpd (if enabled). 197bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). 198bthcid_flags="" # Flags to bthcid (if enabled). 199 200# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 201nis_client_enable="NO" # We're an NIS client (or NO). 202nis_client_flags="" # Flags to ypbind (if enabled). 203nis_ypset_enable="NO" # Run ypset at boot time (or NO). 204nis_ypset_flags="" # Flags to ypset (if enabled). 205nis_server_enable="NO" # We're an NIS server (or NO). 206nis_server_flags="" # Flags to ypserv (if enabled). 207nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 208nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 209nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 210nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 211 212### Network routing options: ### 213defaultrouter="NO" # Set to default gateway (or NO). 214static_routes="" # Set to static route list (or leave empty). 215gateway_enable="NO" # Set to YES if this host will be a gateway. 216router_enable="NO" # Set to YES to enable a routing daemon. 217router_program="/sbin/routed" # Name of routing daemon to use if enabled. 218router_flags="-q" # Flags for routing daemon. 219mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 220mrouted_flags="" # Flags for multicast routing daemon. 221arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 222forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 223accept_sourceroute="NO" # accept source routed packets to us 224 225### Miscellaneous network options: ### 226icmp_bmcastecho="NO" # respond to broadcast ping packets 227 228### IPv6 options: ### 229ipv6_enable="NO" # Set to YES to set up for IPv6. 230ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 231ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 232#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 233ipv6_static_routes="" # Set to static route list (or leave empty). 234#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 235 # route toward loopback interface. 236#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 237ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 238ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 239ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 240ipv6_router_flags="" # Flags to IPv6 routing daemon. 241#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 242 # addrs. 243#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 244 # node, you should stop advertisement. 245#ipv6_network_interfaces="ed0 ep0" # Examples for router 246 # or static configuration for end node. 247 # Choose correct prefix value. 248#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 249#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 250#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 251#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 252ipv6_default_interface="NO" # Default output interface for scoped addrs. 253 # Now this works only for IPv6 link local 254 # multicast addrs. 255rtadvd_enable="NO" # Set to YES to enable an IPv6 router 256 # advertisement daemon. If set to YES, 257 # this router becomes a possible candidate 258 # IPv6 default router for local subnets. 259rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 260rtsold_enable="NO" # Set to YES to enable an IPv6 routing 261 # solicitation daemon. This is used for 262 # automatic discovery of non-link local 263 # addresses. 264rtsold_flags="-a" # Do autoprobing of outgoing interface. 265mroute6d_enable="NO" # Do IPv6 multicast routing. 266mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 267 # routing daemon. You need to 268 # install it from package or 269 # port. 270mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 271stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 272 # tunneling interface. Specify this entry 273 # to enable 6to4 interface. 274stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 275 # to limit peer addr range. Effective value 276 # is 0-31. 277stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 278 # If you like, you can set "AUTO" for this. 279stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 280ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 281 # IPv6-to-IPv4 TCP translator. You also need 282 # faithd(8) setup. 283ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 284 # communication. (like ::ffff:a.b.c.d) 285ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 286 # functionality 287ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 288ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 289ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 290ipv6_firewall_logging="NO" # Set to YES to enable events logging 291ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 292 293############################################################## 294### System console options ################################# 295############################################################## 296 297keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 298keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 299keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 300keychange="NO" # function keys default values (or NO). 301cursor="NO" # cursor type {normal|blink|destructive} (or NO). 302scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 303font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 304font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 305font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 306blanktime="300" # blank time (in seconds) or "NO" to turn it off. 307saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 308moused_nondefault_enable="YES" # Treat non-default mice as enabled unless 309 # specifically overriden in rc.conf(5). 310moused_enable="NO" # Run the mouse daemon. 311moused_type="auto" # See man page for rc.conf(5) for available settings. 312moused_port="/dev/psm0" # Set to your mouse port. 313moused_flags="" # Any additional flags to moused. 314mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 315 # language code table, specify alternative range 316 # start like mousechar_start=3, see vidcontrol(1) 317vidhistory="" # Set video history buffer size 318allscreens_flags="" # Set this vidcontrol mode for all virtual screens 319allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 320 321 322############################################################## 323### Mail Transfer Agent (MTA) options ###################### 324############################################################## 325 326mta_start_script="/etc/rc.sendmail" 327 # Script to start your chosen MTA, called by /etc/rc. 328# Settings for /etc/rc.sendmail: 329sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 330sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 331sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 332sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 333 # Flags for localhost-only MTA 334sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 335sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 336sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 337sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 338 # Flags for sendmail_msp_queue daemon. 339sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). 340 341 342############################################################## 343### Miscellaneous administrative options ################### 344############################################################## 345 346mixer_enable="NO" # Manage mixer settings across reboots 347cron_enable="YES" # Run the periodic job daemon. 348cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 349cron_flags="" # Which options to pass to the cron daemon. 350lpd_enable="NO" # Run the line printer daemon. 351lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 352lpd_flags="" # Flags to lpd (if enabled). 353nscd_enable="NO" # Run the nsswitch caching daemon. 354devd_enable="YES" # Run devd, to trigger programs on device tree changes. 355devd_flags="" # Additional flags for devd(8). 356dumpdev="NO" # Device name to crashdump to (or NO). 357dumpdir="/var/crash" # Directory where crash dumps are to be stored 358savecore_flags="" # Used if dumpdev is enabled above, and present. 359crashinfo_enable="YES" # Automatically generate crash dump summary. 360crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 361enable_quotas="NO" # turn on quotas on startup (or NO). 362check_quotas="YES" # Check quotas on startup (or NO). 363accounting_enable="NO" # Turn on process accounting (or NO). 364sysvipcd_enable="NO" # Run the System V IPC daemon at startup (or NO). 365linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 366clear_tmp_enable="NO" # Clear /tmp at startup. 367ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 368ldconfig_paths="/lib /usr/lib /usr/lib/compat /usr/local/lib /usr/pkg/lib" 369 # shared library search paths 370ldconfig_local_dirs="/usr/local/libdata/ldconfig" 371 # Local directories with ldconfig configuration files. 372kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 373update_motd="YES" # update version info in /etc/motd (or NO) 374start_vinum="NO" # set to YES to start vinum 375udevd_enable="NO" # Run udevd(8) daemon. 376udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm). 377lvm_enable="NO" # Run LVM volume discovery. 378entropy_file="/entropy" # Set to NO to disable caching entropy through reboots. 379entropy_save_sz="16384" # Size of the entropy cache files (in bytes) 380rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 381dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 382newsyslog_enable="NO" # Run newsyslog at startup. 383newsyslog_flags="" # Flags to newsyslog (if enabled). 384resident_enable="NO" # Process /etc/resident.conf 385varsym_enable="NO" # Process /etc/varsym.conf 386watchdogd_enable="NO" # Start the software watchdog daemon 387 388############################################################## 389### Jail Configuration ####################################### 390############################################################## 391 392jail_enable="NO" # Set to NO to disable starting of any jails 393jail_list="" # Space separated list of names of jails 394jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 395jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 396jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 397 398# 399# To use rc's built-in jail infrastructure create entries for 400# each jail, specified in jail_list, with the following variables. 401# NOTES: 402# - replace 'example' with the jail's name. 403# - except rootdir, hostname and ip, all of the following variables may be made 404# global jail variables if you don't specify a jail name (ie. jail_interface). 405# 406#jail_example_rootdir="/usr/jail/default" # Jail's root directory 407#jail_example_hostname="default.domain.com" # Jail's hostname 408#jail_example_ip="192.168.0.10" # Jail's IP number 409#jail_example_interface="" # Interface to create the IP alias on 410#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 411#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 412#jail_example_fdesc_enable="NO" # mount fdesc in the jail 413#jail_example_procfs_enable="NO" # mount procfs in jail 414#jail_example_devfs_enable="NO" # mount devfs in jail 415#jail_example_mount_enable="NO" # mount/umount jail's fs 416#jail_example_fstab="" # fstab(5) for mount/umount 417#jail_example_flags="-l -U root" # flags for jail(8) 418 419############################################################## 420### VFS quota options ####################################### 421############################################################## 422 423vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options 424vfs_quota_sync="" # Space separated list of mount points or "NO" 425 426############################################################## 427### VKernel options ######################################### 428############################################################## 429 430vkernel_enable="NO" # Set to YES to enable starting of vkernels 431vkernel_list="" # Space separated list of names of vkernels 432#vkernel_bin="/boot/kernel.VKERNEL" # Default path to the vkernel binary 433#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued 434 435vknetd_enable="NO" # Bridged networking 436vknetd_flags="-U" # Bridged networking flags 437# 438# Create an entry for each vkernel specified in vkernel_list 439# replacing 'example' by the name of the vkernel. 440# 441#vkernel_example_bin="/boot/kernel.VKERNEL" 442 # Path to the vkernel binary 443#vkernel_example_memsize="64m" 444 # Amount of memory for the vkernel 445#vkernel_example_rootimg_list="/var/vkernel/rootimg.01" 446 # Space separated list of disk images 447#vkernel_example_iface_list="auto:bridge0" 448 # Optional: space separated list network interfaces for the vkernel 449#vkernel_example_logfile="/dev/null" 450 # Optional: path to the console log file 451#vkernel_example_flags="-U" 452 # Optional: aditional flags to start the vkernel with 453#vkernel_example_kill_timeout="45" 454 # Optional: timeout before SIGKILL is issued when stopping the vkernel 455 456############################################################## 457### Define source_rc_confs, the mechanism used by /etc/rc.* ## 458### scripts to source rc_conf_files overrides safely. ## 459############################################################## 460 461if [ -z "${source_rc_confs_defined}" ]; then 462 source_rc_confs_defined=yes 463 source_rc_confs () { 464 local i sourced_files 465 for i in ${rc_conf_files}; do 466 case ${sourced_files} in 467 *:$i:*) 468 ;; 469 *) 470 sourced_files="${sourced_files}:$i:" 471 if [ -r $i ]; then 472 . $i 473 fi 474 ;; 475 esac 476 done 477 } 478fi 479