1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17# $DragonFly: src/etc/defaults/rc.conf,v 1.18 2004/12/01 04:16:42 joerg Exp $ 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23rc_debug="NO" # Set to YES to enable debugging output from rc.d 24rc_info="YES" # Enables display of informational messages at boot. 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 28apmd_enable="NO" # Run apmd to handle APM event from userland. 29apmd_flags="" # Flags to apmd (if enabled). 30devd_enable="NO" # Run devd, to trigger programs on device tree changes. 31kldxref_enable="NO" # Build linker.hints files with kldxref(8). 32kldxref_clobber="NO" # Overwrite old linker.hints at boot. 33kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 34pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 35pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 36pccard_beep="2" # pccard beep type. 37pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 38pccardd_flags="-z" # Additional flags for pccardd. 39pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 40pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 41removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 42local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 43script_name_sep=" " # Change if your startup scripts' names contain spaces 44rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 45fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 46netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 47extra_netfs_types="NO" # List of network extra filesystem types for delayed 48 # mount at startup (or NO). 49 50############################################################## 51### Network configuration sub-section ###################### 52############################################################## 53 54### Basic network and firewall/security options: ### 55# 56# see 'man firewall' for an explanation of the default firewall rules 57# 58hostname="" # Set this! 59nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 60dhclient_program="/sbin/dhclient" # Path to dhcp client program. 61dhclient_flags="" # Additional flags to pass to dhcp client. 62firewall_enable="NO" # Set to YES to enable firewall functionality 63firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 64firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 65firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 66firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 67firewall_allowed_icmp_types="0 3 8 11 12 13 14" 68firewall_open_tcp_ports="22 25 53 80 113 443" 69firewall_open_udp_ports="53" 70firewall_quiet="NO" # Set to YES to suppress rule display 71firewall_logging="NO" # Set to YES to enable events logging 72firewall_flags="" # Flags passed to ipfw when type is a file 73ip_portrange_first="NO" # Set first dynamically allocated port 74ip_portrange_last="NO" # Set last dynamically allocated port 75ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 76ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 77natd_program="/sbin/natd" # path to natd, if you want a different one. 78natd_enable="NO" # Enable natd (if firewall_enable == YES). 79natd_interface="" # Public interface or IPaddress to use. 80natd_flags="" # Additional flags for natd. 81ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 82ipfilter_program="/sbin/ipf" # where the ipfilter program lives 83ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 84 # /usr/src/contrib/ipfilter/rules for examples 85ipfilter_flags="" # additional flags for ipfilter 86ipnat_enable="NO" # Set to YES to enable ipnat functionality 87ipnat_program="/sbin/ipnat" # where the ipnat program lives 88ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 89ipnat_flags="" # additional flags for ipnat 90ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 91ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 92ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 93ipfs_enable="NO" # Set to YES to enable saving and restoring 94 # of state tables at shutdown and boot 95ipfs_program="/sbin/ipfs" # where the ipfs program lives 96ipfs_flags="" # additional flags for ipfs 97pf_enable="NO" # Set to YES to enable packet filter (pf) 98pf_rules="/etc/pf.conf" # rules definition file for pf 99pf_program="/usr/sbin/pfctl" # where the pfctl program lives 100pf_flags="" # additional flags for pfctl 101pflog_enable="NO" # Set to YES to enable packet filter logging 102pflog_logfile="/var/log/pflog" # where pflogd shoule store the logfile 103pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 104pflog_flags="" # additional flags for pflogd 105tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 106log_in_vain="0" # >=1 to log connects to ports w/o listeners. 107tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 108# For the following option you need to have TCP_DROP_SYNFIN set in your 109# kernel. Please refer to LINT and NOTES for details. 110tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 111 # NOTE: this violates the TCP specification 112icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 113icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 114network_interfaces="auto" # List of network interfaces (or "auto"). 115cloned_interfaces="" # List of cloned network interfaces to create. 116#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 117ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 118#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 119#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 120# 121# If you have any sppp(4) interfaces above, you might also want to set 122# the following parameters. Refer to spppcontrol(8) for their meaning. 123sppp_interfaces="" # List of sppp interfaces. 124#sppp_interfaces="isp0" # example: sppp over ISDN 125#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 126gif_interfaces="NO" # List of GIF tunnels (or "NO"). 127#gif_interfaces="gif0 gif1" # Examples typically for a router. 128 # Choose correct tunnel addrs. 129#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 130#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 131 132# User ppp configuration. 133ppp_enable="NO" # Start user-ppp (or NO). 134ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 135 # For details see man page for ppp(8). Default is auto. 136ppp_nat="YES" # Use PPP's internal network address translation or NO. 137ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 138ppp_user="root" # Which user to run ppp as 139 140### Network daemon (miscellaneous) ### 141syslogd_enable="YES" # Run syslog daemon (or NO). 142syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 143#syslogd_flags="-s" # Flags to syslogd (if enabled). 144syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 145inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 146inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 147inetd_flags="-wW" # Optional flags to inetd 148# 149# named. It may be possible to run named in a sandbox, man security for 150# details. Note: when named_chrootdir is specified, RCNG automatically 151# adds '-u bind'. 152# 153named_enable="NO" # Run named, the DNS server (or NO). 154named_program="/usr/sbin/named" # path to named, if you want a different one. 155named_pidfile="/var/run/named.pid" # Pid file 156named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it) 157 158# 159# kerberos. Do not run the admin daemons on slave servers 160# 161kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 162kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 163kadmind5_server_enable="NO" # Run kadmind (or NO) 164kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 165kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 166kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 167 168rwhod_enable="NO" # Run the rwho daemon (or NO). 169rwhod_flags="" # Flags for rwhod 170rarpd_enable="NO" # Run rarpd (or NO). 171rarpd_flags="" # Flags to rarpd. 172bootparamd_enable="NO" # Run bootparamd (or NO). 173bootparamd_flags="" # Flags to bootparamd 174pppoed_enable="NO" # Run the PPP over Ethernet daemon. 175pppoed_provider="*" # Provider and ppp(8) config file entry. 176pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 177pppoed_interface="fxp0" # The interface that pppoed runs on. 178sshd_enable="NO" # Enable sshd 179sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 180sshd_flags="" # Additional flags for sshd. 181 182### Network File System (NFS): ### 183### Server-side options also need rpcbind_enable="YES" ### 184amd_enable="NO" # Run amd service with $amd_flags (or NO). 185amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 186amd_map_program="NO" # Can be set to "ypcat -k amd.master" 187nfs_client_enable="NO" # This host is an NFS client (or NO). 188nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 189nfs_access_cache="2" # Client cache timeout in seconds 190nfs_server_enable="NO" # This host is an NFS server (or NO). 191nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 192mountd_enable="NO" # Run mountd (or NO). 193mountd_flags="-r" # Flags to mountd (if NFS server enabled). 194weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 195nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 196nfs_bufpackets="" # bufspace (in packets) for client 197rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 198rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 199rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 200rpcbind_enable="NO" # Run the portmapper service (YES/NO). 201# this is rpcbind in 5.x 202rpcbind_program="/usr/sbin/portmap" # path to rpcbind, if you want a different one. 203rpcbind_flags="" # Flags to rpcbind (if enabled). 204rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 205keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 206keyserv_flags="" # Flags to keyserv (if enabled). 207 208### Network Time Services options: ### 209timed_enable="NO" # Run the time daemon (or NO). 210timed_flags="" # Flags to timed (if enabled). 211ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 212ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 213ntpd_flags="-s" # Flags to ntpd (if enabled). 214 215# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 216nis_client_enable="NO" # We're an NIS client (or NO). 217nis_client_flags="" # Flags to ypbind (if enabled). 218nis_ypset_enable="NO" # Run ypset at boot time (or NO). 219nis_ypset_flags="" # Flags to ypset (if enabled). 220nis_server_enable="NO" # We're an NIS server (or NO). 221nis_server_flags="" # Flags to ypserv (if enabled). 222nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 223nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 224nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 225nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 226 227### Network routing options: ### 228defaultrouter="NO" # Set to default gateway (or NO). 229static_routes="" # Set to static route list (or leave empty). 230gateway_enable="NO" # Set to YES if this host will be a gateway. 231router_enable="NO" # Set to YES to enable a routing daemon. 232router="/sbin/routed" # Name of routing daemon to use if enabled. 233router_flags="-q" # Flags for routing daemon. 234mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 235mrouted_flags="" # Flags for multicast routing daemon. 236ipxgateway_enable="NO" # Set to YES to enable IPX routing. 237ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 238ipxrouted_flags="" # Flags for IPX routing daemon. 239arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 240forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 241accept_sourceroute="NO" # accept source routed packets to us 242 243### ATM interface options: ### 244atm_enable="NO" # Configure ATM interfaces (or NO). 245#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 246#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 247#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 248#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 249#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 250#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 251atm_pvcs="" # Set to PVC list (or leave empty). 252atm_arps="" # Set to permanent ARP list (or leave empty). 253 254### ISDN interface options: (see also: /usr/share/examples/isdn) ### 255isdn_enable="NO" # Enable the ISDN subsystem (or NO). 256isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 257isdn_flags="-dn -d0x1f9" # Flags for isdnd 258isdn_ttype="cons25" # terminal type for fullscreen mode 259isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 260isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 261isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 262 263### Miscellaneous network options: ### 264icmp_bmcastecho="NO" # respond to broadcast ping packets 265 266### IPv6 options: ### 267ipv6_enable="NO" # Set to YES to set up for IPv6. 268ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 269ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 270#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 271ipv6_static_routes="" # Set to static route list (or leave empty). 272#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 273 # route toward loopback interface. 274#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 275ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 276ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 277ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 278ipv6_router_flags="" # Flags to IPv6 routing daemon. 279#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 280 # addrs. 281#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 282 # node, you should stop advertisement. 283#ipv6_network_interfaces="ed0 ep0" # Examples for router 284 # or static configuration for end node. 285 # Choose correct prefix value. 286#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 287#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 288#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 289#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 290ipv6_default_interface="NO" # Default output interface for scoped addrs. 291 # Now this works only for IPv6 link local 292 # multicast addrs. 293rtadvd_enable="NO" # Set to YES to enable an IPv6 router 294 # advertisement daemon. If set to YES, 295 # this router becomes a possible candidate 296 # IPv6 default router for local subnets. 297rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 298mroute6d_enable="NO" # Do IPv6 multicast routing. 299mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 300 # routing daemon. You need to 301 # install it from package or 302 # port. 303mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 304stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 305 # tunneling interface. Specify this entry 306 # to enable 6to4 interface. 307stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 308 # to limit peer addr range. Effective value 309 # is 0-31. 310stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 311 # If you like, you can set "AUTO" for this. 312stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 313ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 314 # IPv6-to-IPv4 TCP translator. You also need 315 # faithd(8) setup. 316ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 317 # communication. (like ::ffff:a.b.c.d) 318ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 319 # functionality 320ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 321ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 322ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 323ipv6_firewall_logging="NO" # Set to YES to enable events logging 324ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 325ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 326 # see /usr/src/contrib/ipfilter/rules 327 # for examples 328 329############################################################## 330### System console options ################################# 331############################################################## 332 333keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 334keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 335keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 336keychange="NO" # function keys default values (or NO). 337cursor="NO" # cursor type {normal|blink|destructive} (or NO). 338scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 339font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 340font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 341font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 342blanktime="300" # blank time (in seconds) or "NO" to turn it off. 343saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 344moused_enable="NO" # Run the mouse daemon. 345moused_type="auto" # See man page for rc.conf(5) for available settings. 346moused_port="/dev/psm0" # Set to your mouse port. 347moused_flags="" # Any additional flags to moused. 348mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 349 # language code table, specify alternative range 350 # start like mousechar_start=3, see vidcontrol(1) 351allscreens_flags="" # Set this vidcontrol mode for all virtual screens 352allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 353 354 355############################################################## 356### pcvt console driver options ############################ 357############################################################## 358 359pcvt_verbose="NO" # set to YES to enable verbose configuration messages 360pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 361pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 362pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 363pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 364pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 365pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 366pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 367pcvt_blanktime="NO" # blank time (in seconds) (or NO). 368pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 369pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 370pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 371 372 373############################################################## 374### Mail Transfer Agent (MTA) options ###################### 375############################################################## 376 377mta_start_script="/etc/rc.sendmail" 378 # Script to start your chosen MTA, called by /etc/rc. 379# Settings for /etc/rc.sendmail: 380sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 381sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 382sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 383sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 384 # Flags for localhost-only MTA 385sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 386sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 387sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 388sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 389 # Flags for sendmail_msp_queue daemon. 390 391 392############################################################## 393### Miscellaneous administrative options ################### 394############################################################## 395 396mixer_enable="NO" # Manage mixer settings across reboots 397cron_enable="YES" # Run the periodic job daemon. 398cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 399cron_flags="" # Which options to pass to the cron daemon. 400lpd_enable="NO" # Run the line printer daemon. 401lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 402lpd_flags="" # Flags to lpd (if enabled). 403usbd_enable="NO" # Run the usbd daemon. 404usbd_flags="" # Flags to usbd (if enabled). 405dumpdev="NO" # Device name to crashdump to (or NO). 406dumpdir="/var/crash" # Directory where crash dumps are to be stored 407savecore_flags="" # Used if dumpdev is enabled above, and present. 408enable_quotas="NO" # turn on quotas on startup (or NO). 409check_quotas="YES" # Check quotas on startup (or NO). 410accounting_enable="NO" # Turn on process accounting (or NO). 411ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 412ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 413sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 414linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 415svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 416osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 417clear_tmp_enable="NO" # Clear /tmp at startup. 418ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 419ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 420 # shared library search paths 421ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 422 # a.out shared library search paths 423kern_securelevel_enable="NO" # kernel security level (see init(8)), 424kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 425lomac_enable="NO" # start lomac(4) security module at boot 426update_motd="YES" # update version info in /etc/motd (or NO) 427start_vinum="NO" # set to YES to start vinum 428unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 429rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 430dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 431jail_enable="NO" # Set to NO to disable starting of any jails 432jail_list="" # Space separated list of names of jails 433jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 434jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 435jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 436resident_enable="NO" # Proccess /etc/resident.conf 437varsym_enable="NO" # Proccess /etc/varsym.conf 438watchdogd_enable="NO" # Start the software watchdog daemon 439 440############################################################## 441### Define source_rc_confs, the mechanism used by /etc/rc.* ## 442### scripts to source rc_conf_files overrides safely. ## 443############################################################## 444 445if [ -z "${source_rc_confs_defined}" ]; then 446 source_rc_confs_defined=yes 447 source_rc_confs () { 448 local i sourced_files 449 for i in ${rc_conf_files}; do 450 case ${sourced_files} in 451 *:$i:*) 452 ;; 453 *) 454 sourced_files="${sourced_files}:$i:" 455 if [ -r $i ]; then 456 . $i 457 fi 458 ;; 459 esac 460 done 461 } 462fi 463