1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17 18############################################################## 19### Important initial Boot-time options #################### 20############################################################## 21 22rc_debug="NO" # Set to YES to enable debugging output from rc.d 23rc_info="YES" # Enables display of informational messages at boot. 24rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 25swapfile="NO" # Set to name of swapfile if aux swapfile desired. 26apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 27apmd_enable="NO" # Run apmd to handle APM event from userland. 28apmd_flags="" # Flags to apmd (if enabled). 29battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining. 30battd_flags="" # Flags to battd (if enabled). 31powerd_enable="NO" # Run powerd to adjust CPU speed. 32sensorsd_enable="NO" # Run sensorsd to monitor and log sensor state changes. 33sensorsd_flags="" # additional flags for sensorsd(8). 34hotplugd_enable="NO" # Run hotplugd to monitor devices hot plugging. 35hotplugd_flags="" # additional flags for hotplugd(8) 36pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 37pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 38removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 39local_startup="/usr/local/etc/rc.d /usr/pkg/etc/rc.d" 40 # startup script dirs. 41script_name_sep=" " # Change if your startup scripts' names contain spaces 42rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 43fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 44netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 45extra_netfs_types="NO" # List of network extra filesystem types for delayed 46 # mount at startup (or NO). 47devfs_config_files="/etc/defaults/devfs.conf /etc/devfs.conf" 48 # Config files for devfs(5) 49 50############################################################## 51### Network configuration sub-section ###################### 52############################################################## 53 54### Basic network and firewall/security options: ### 55# 56# see 'man firewall' for an explanation of the default firewall rules 57# 58hostname="" # Set this! 59nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 60dhclient_program="/sbin/dhclient" # Path to dhcp client program. 61dhclient_flags="" # Additional flags to pass to dhcp client. 62firewall_enable="NO" # Set to YES to enable firewall functionality 63firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 64firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 65firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 66firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 67firewall_allowed_icmp_types="0 3 8 11 12 13 14" 68firewall_open_tcp_ports="22 25 53 80 113 443" 69firewall_open_udp_ports="53" 70firewall_quiet="NO" # Set to YES to suppress rule display 71firewall_logging="NO" # Set to YES to enable events logging 72firewall_flags="" # Flags passed to ipfw when type is a file 73ip_portrange_first="NO" # Set first dynamically allocated port 74ip_portrange_last="NO" # Set last dynamically allocated port 75ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 76ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 77natd_program="/sbin/natd" # path to natd, if you want a different one. 78natd_enable="NO" # Enable natd (if firewall_enable == YES). 79natd_interface="" # Public interface or IPaddress to use. 80natd_flags="" # Additional flags for natd. 81pf_enable="NO" # Set to YES to enable packet filter (pf) 82pf_rules="/etc/pf.conf" # rules definition file for pf 83pf_program="/usr/sbin/pfctl" # where the pfctl program lives 84pf_flags="" # additional flags for pfctl 85pflog_enable="NO" # Set to YES to enable packet filter logging 86pflog_logfile="/var/log/pflog" # where pflogd should store the logfile 87pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 88pflog_flags="" # additional flags for pflogd 89tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 90log_in_vain="0" # >=1 to log connects to ports w/o listeners. 91tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 92# For the following option you need to have TCP_DROP_SYNFIN set in your 93# kernel. Please refer to LINT and NOTES for details. 94tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 95 # NOTE: this violates the TCP specification 96icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 97icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 98network_interfaces="auto" # List of network interfaces (or "auto"). 99cloned_interfaces="" # List of cloned network interfaces to create. 100#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 101ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 102#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 103#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 104#ifconfig_fxp0_name="net0" # Change interface name from fxp0 to net0. 105# 106# If you have any sppp(4) interfaces above, you might also want to set 107# the following parameters. Refer to spppcontrol(8) for their meaning. 108sppp_interfaces="" # List of sppp interfaces. 109#sppp_interfaces="...0" # example: sppp over ... 110#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 111gif_interfaces="NO" # List of GIF tunnels (or "NO"). 112#gif_interfaces="gif0 gif1" # Examples typically for a router. 113 # Choose correct tunnel addrs. 114#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 115#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 116 117# User ppp configuration. 118ppp_enable="NO" # Start user-ppp (or NO). 119ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 120 # For details see man page for ppp(8). Default is auto. 121ppp_nat="YES" # Use PPP's internal network address translation or NO. 122ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 123ppp_user="root" # Which user to run ppp as 124 125### Network daemon (miscellaneous) ### 126hostapd_enable="NO" # Run hostap daemon. 127syslogd_enable="YES" # Run syslog daemon (or NO). 128syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 129#syslogd_flags="-s" # Flags to syslogd (if enabled). 130syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 131inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 132inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 133inetd_flags="-wW" # Optional flags to inetd 134 135rwhod_enable="NO" # Run the rwho daemon (or NO). 136rwhod_flags="" # Flags for rwhod 137rarpd_enable="NO" # Run rarpd (or NO). 138rarpd_flags="" # Flags to rarpd. 139bootparamd_enable="NO" # Run bootparamd (or NO). 140bootparamd_flags="" # Flags to bootparamd 141pppoed_enable="NO" # Run the PPP over Ethernet daemon. 142pppoed_provider="*" # Provider and ppp(8) config file entry. 143pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 144pppoed_interface="fxp0" # The interface that pppoed runs on. 145sshd_enable="NO" # Enable sshd 146sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 147sshd_flags="" # Additional flags for sshd. 148 149ftpd_enable="NO" # Run stand-alone ftp daemon (or NO). 150ftpd_flags="" # Flags for ftpd, -D added implicitly. 151 152### Network File System (NFS): ### 153### Server-side options also need rpcbind_enable="YES" ### 154### 155### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 156### the mtime matches the data cache is left intact. 157### 158amd_enable="NO" # Run amd service with $amd_flags (or NO). 159amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 160amd_map_program="NO" # Can be set to "ypcat -k amd.master" 161nfs_client_enable="NO" # This host is an NFS client (or NO). 162nfs_access_cache="5" # Client attribute cache timeout in seconds 163#nfs_neg_cache="3" # Client attribute negative hit cache timeout 164nfs_server_enable="NO" # This host is an NFS server (or NO). 165nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 166mountd_enable="NO" # Run mountd (or NO). 167mountd_flags="-r" # Flags to mountd (if NFS server enabled). 168weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 169nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 170nfs_bufpackets="" # bufspace (in packets) for client 171rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 172rpc_lockd_flags="" # Flags to rpc.lockd (if enabled). 173rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 174rpc_statd_flags="" # Flags to rpc.statd (if enabled). 175rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 176rpcbind_enable="NO" # Run the portmapper service (YES/NO). 177rpcbind_program="/usr/sbin/rpcbind" # path to rpcbind, if you want a different one. 178rpcbind_flags="" # Flags to rpcbind (if enabled). 179rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 180keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 181keyserv_flags="" # Flags to keyserv (if enabled). 182 183### Network Time Services options: ### 184timed_enable="NO" # Run the time daemon (or NO). 185timed_flags="" # Flags to timed (if enabled). 186dntpd_enable="NO" # Run dntpd Network Time Protocol (or NO). 187dntpd_program="/usr/sbin/dntpd" # path to dntpd, if you want a different one. 188dntpd_flags="" # Flags to dntpd (if enabled) also server name(s) 189 190# Bluetooth deamons and options: 191btconfig_enable="NO" # Configure Bluetooth devices (or NO). 192btconfig_devices="" # List of Bluetooth devices (or empty for all). 193#btconfig_<device>="" # Parameters to pass to <device>. 194btconfig_args="" # Parameters to pass to all devices. 195sdpd_enable="NO" # Run the Service Discovery Profile daemon (or NO). 196sdpd_flags="" # Flags to sdpd (if enabled). 197bthcid_enable="NO" # Run the Bluetooth Link Key/PIN Code Manager (or NO). 198bthcid_flags="" # Flags to bthcid (if enabled). 199 200# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 201nis_client_enable="NO" # We're an NIS client (or NO). 202nis_client_flags="" # Flags to ypbind (if enabled). 203nis_ypset_enable="NO" # Run ypset at boot time (or NO). 204nis_ypset_flags="" # Flags to ypset (if enabled). 205nis_server_enable="NO" # We're an NIS server (or NO). 206nis_server_flags="" # Flags to ypserv (if enabled). 207nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 208nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 209nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 210nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 211 212### Network routing options: ### 213defaultrouter="NO" # Set to default gateway (or NO). 214static_routes="" # Set to static route list (or leave empty). 215gateway_enable="NO" # Set to YES if this host will be a gateway. 216router_enable="NO" # Set to YES to enable a routing daemon. 217router_program="/sbin/routed" # Name of routing daemon to use if enabled. 218router_flags="-q" # Flags for routing daemon. 219mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 220mrouted_flags="" # Flags for multicast routing daemon. 221ipxgateway_enable="NO" # Set to YES to enable IPX routing. 222ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 223ipxrouted_flags="" # Flags for IPX routing daemon. 224arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 225forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 226accept_sourceroute="NO" # accept source routed packets to us 227 228### ATM interface options: ### 229atm_enable="NO" # Configure ATM interfaces (or NO). 230#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 231#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 232#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 233#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 234#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 235#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 236atm_arps="" # Set to permanent ARP list (or leave empty). 237 238### Miscellaneous network options: ### 239icmp_bmcastecho="NO" # respond to broadcast ping packets 240 241### IPv6 options: ### 242ipv6_enable="NO" # Set to YES to set up for IPv6. 243ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 244ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 245#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 246ipv6_static_routes="" # Set to static route list (or leave empty). 247#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 248 # route toward loopback interface. 249#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 250ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 251ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 252ipv6_router_program="/usr/sbin/route6d" # Name of IPv6 routing daemon. 253ipv6_router_flags="" # Flags to IPv6 routing daemon. 254#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 255 # addrs. 256#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 257 # node, you should stop advertisement. 258#ipv6_network_interfaces="ed0 ep0" # Examples for router 259 # or static configuration for end node. 260 # Choose correct prefix value. 261#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 262#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 263#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 264#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 265ipv6_default_interface="NO" # Default output interface for scoped addrs. 266 # Now this works only for IPv6 link local 267 # multicast addrs. 268rtadvd_enable="NO" # Set to YES to enable an IPv6 router 269 # advertisement daemon. If set to YES, 270 # this router becomes a possible candidate 271 # IPv6 default router for local subnets. 272rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 273rtsold_enable="NO" # Set to YES to enable an IPv6 routing 274 # solicitation daemon. This is used for 275 # automatic discovery of non-link local 276 # addresses. 277rtsold_flags="-a" # Do autoprobing of outgoing interface. 278mroute6d_enable="NO" # Do IPv6 multicast routing. 279mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 280 # routing daemon. You need to 281 # install it from package or 282 # port. 283mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 284stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 285 # tunneling interface. Specify this entry 286 # to enable 6to4 interface. 287stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 288 # to limit peer addr range. Effective value 289 # is 0-31. 290stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 291 # If you like, you can set "AUTO" for this. 292stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 293ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 294 # IPv6-to-IPv4 TCP translator. You also need 295 # faithd(8) setup. 296ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 297 # communication. (like ::ffff:a.b.c.d) 298ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 299 # functionality 300ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 301ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 302ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 303ipv6_firewall_logging="NO" # Set to YES to enable events logging 304ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 305 306############################################################## 307### System console options ################################# 308############################################################## 309 310keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 311keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 312keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 313keychange="NO" # function keys default values (or NO). 314cursor="NO" # cursor type {normal|blink|destructive} (or NO). 315scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 316font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 317font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 318font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 319blanktime="300" # blank time (in seconds) or "NO" to turn it off. 320saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 321moused_enable="NO" # Run the mouse daemon. 322moused_type="auto" # See man page for rc.conf(5) for available settings. 323moused_port="/dev/psm0" # Set to your mouse port. 324moused_flags="" # Any additional flags to moused. 325mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 326 # language code table, specify alternative range 327 # start like mousechar_start=3, see vidcontrol(1) 328vidhistory="" # Set video history buffer size 329allscreens_flags="" # Set this vidcontrol mode for all virtual screens 330allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 331 332 333############################################################## 334### Mail Transfer Agent (MTA) options ###################### 335############################################################## 336 337mta_start_script="/etc/rc.sendmail" 338 # Script to start your chosen MTA, called by /etc/rc. 339# Settings for /etc/rc.sendmail: 340sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 341sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 342sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 343sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 344 # Flags for localhost-only MTA 345sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 346sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 347sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 348sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 349 # Flags for sendmail_msp_queue daemon. 350sendmail_rebuild_aliases="YES" # Run newaliases if necessary (YES/NO). 351 352 353############################################################## 354### Miscellaneous administrative options ################### 355############################################################## 356 357mixer_enable="NO" # Manage mixer settings across reboots 358cron_enable="YES" # Run the periodic job daemon. 359cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 360cron_flags="" # Which options to pass to the cron daemon. 361lpd_enable="NO" # Run the line printer daemon. 362lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 363lpd_flags="" # Flags to lpd (if enabled). 364nscd_enable="NO" # Run the nsswitch caching daemon. 365usbd_enable="NO" # Run the usbd daemon. 366usbd_flags="" # Flags to usbd (if enabled). 367devd_enable="NO" # Rund devd(8) daemon. 368devd_flags="" # Flags to devd(8) (if enabled). 369dumpdev="NO" # Device name to crashdump to (or NO). 370dumpdir="/var/crash" # Directory where crash dumps are to be stored 371savecore_flags="" # Used if dumpdev is enabled above, and present. 372crashinfo_enable="YES" # Automatically generate crash dump summary. 373crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary. 374enable_quotas="NO" # turn on quotas on startup (or NO). 375check_quotas="YES" # Check quotas on startup (or NO). 376accounting_enable="NO" # Turn on process accounting (or NO). 377sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 378linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 379clear_tmp_enable="NO" # Clear /tmp at startup. 380ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 381ldconfig_paths="/usr/lib /usr/lib/compat /usr/local/lib /usr/pkg/lib" 382 # shared library search paths 383ldconfig_local_dirs="/usr/local/libdata/ldconfig" 384 # Local directories with ldconfig configuration files. 385kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 386update_motd="YES" # update version info in /etc/motd (or NO) 387start_vinum="NO" # set to YES to start vinum 388udevd_enable="NO" # Run udevd(8) daemon. 389udevd_early="NO" # Run udevd(8) daemon early in boot (for lvm). 390lvm_enable="NO" # Run LVM volume discovery. 391rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 392dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 393newsyslog_enable="NO" # Run newsyslog at startup. 394newsyslog_flags="" # Flags to newsyslog (if enabled). 395resident_enable="NO" # Process /etc/resident.conf 396varsym_enable="NO" # Process /etc/varsym.conf 397watchdogd_enable="NO" # Start the software watchdog daemon 398 399############################################################## 400### Jail Configuration ####################################### 401############################################################## 402 403jail_enable="NO" # Set to NO to disable starting of any jails 404jail_list="" # Space separated list of names of jails 405jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 406jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 407jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 408 409# 410# To use rc's built-in jail infrastructure create entries for 411# each jail, specified in jail_list, with the following variables. 412# NOTES: 413# - replace 'example' with the jail's name. 414# - except rootdir, hostname and ip, all of the following variables may be made 415# global jail variables if you don't specify a jail name (ie. jail_interface). 416# 417#jail_example_rootdir="/usr/jail/default" # Jail's root directory 418#jail_example_hostname="default.domain.com" # Jail's hostname 419#jail_example_ip="192.168.0.10" # Jail's IP number 420#jail_example_interface="" # Interface to create the IP alias on 421#jail_example_exec_start="/bin/sh /etc/rc" # command to execute in jail for starting 422#jail_example_exec_stop="/bin/sh /etc/rc.shutdown" # command to execute in jail for stopping 423#jail_example_fdesc_enable="NO" # mount fdesc in the jail 424#jail_example_procfs_enable="NO" # mount procfs in jail 425#jail_example_devfs_enable="NO" # mount devfs in jail 426#jail_example_mount_enable="NO" # mount/umount jail's fs 427#jail_example_fstab="" # fstab(5) for mount/umount 428#jail_example_flags="-l -U root" # flags for jail(8) 429 430############################################################## 431### VFS quota options ####################################### 432############################################################## 433 434vfs_quota_enable="NO" # Set to YES to enable handling of these vfs quota options 435vfs_quota_sync="" # Space separated list of mount points or "NO" 436 437############################################################## 438### VKernel options ######################################### 439############################################################## 440 441vkernel_enable="NO" # Set to YES to enable starting of vkernels 442vkernel_list="" # Space separated list of names of vkernels 443#vkernel_bin="/boot/kernel.VKERNEL" # Default path to the vkernel binary 444#vkernel_kill_timeout="45" # Default timeout before a SIGKILL is issued 445 446vknetd_enable="NO" # Bridged networking 447vknetd_flags="-U" # Bridged networking flags 448# 449# Create an entry for each vkernel specified in vkernel_list 450# replacing 'example' by the name of the vkernel. 451# 452#vkernel_example_bin="/boot/kernel.VKERNEL" 453 # Path to the vkernel binary 454#vkernel_example_memsize="64m" 455 # Amount of memory for the vkernel 456#vkernel_example_rootimg_list="/var/vkernel/rootimg.01" 457 # Space separated list of disk images 458#vkernel_example_iface_list="auto:bridge0" 459 # Optional: space separated list network interfaces for the vkernel 460#vkernel_example_logfile="/dev/null" 461 # Optional: path to the console log file 462#vkernel_example_flags="-U" 463 # Optional: aditional flags to start the vkernel with 464#vkernel_example_kill_timeout="45" 465 # Optional: timeout before SIGKILL is issued when stopping the vkernel 466 467############################################################## 468### Define source_rc_confs, the mechanism used by /etc/rc.* ## 469### scripts to source rc_conf_files overrides safely. ## 470############################################################## 471 472if [ -z "${source_rc_confs_defined}" ]; then 473 source_rc_confs_defined=yes 474 source_rc_confs () { 475 local i sourced_files 476 for i in ${rc_conf_files}; do 477 case ${sourced_files} in 478 *:$i:*) 479 ;; 480 *) 481 sourced_files="${sourced_files}:$i:" 482 if [ -r $i ]; then 483 . $i 484 fi 485 ;; 486 esac 487 done 488 } 489fi 490