1# $FreeBSD: src/etc/gettytab,v 1.17.2.3 2001/09/27 08:47:55 murray Exp $ 2# $DragonFly: src/etc/gettytab,v 1.4 2008/08/31 17:37:19 swildner Exp $ 3# from: @(#)gettytab 5.14 (Berkeley) 3/27/91 4# 5# Most of the table entries here are just copies of the old getty table, 6# it is by no means certain, or even likely, that any of them are optimal 7# for any purpose whatever. Nor is it likely that more than a couple are 8# even correct. 9# 10# The default gettytab entry, used to set defaults for all other 11# entries, and in cases where getty is called with no table name. 12# 13# cb, ce and ck are desirable on most crt's. The non-crt entries need to 14# be changed to turn them off (:cb@:ce@:ck@:). 15# 16# lc should always be on; it's a remainder of some stone age when there 17# have been terminals around not being able of handling lower-case 18# characters. Those terminals aren't supported any longer, but getty is 19# `smart' about them by default. 20# 21# Parity defaults to even, but the Pc entry and all the `std' entries 22# specify no parity. The different parities are: 23# (none): same as even except -inpck instead of inpck for login. 24# ep: getty will use raw mode (cs8 -parenb) (unless rw is set) and 25# fake parity. login will use even parity (cs7 parenb -parodd). 26# op: same as ep except odd parity (cs7 parenb parodd) for login. 27# op overrides ep. 28# ap: same as ep except -inpck instead of inpck for login. 29# ap overrides op and ep. 30# np: 1. don't fake parity in getty. The fake parity garbles 31# characters on non-terminals (like pccons) that don't 32# support parity. It would probably better for getty not to 33# try to fake parity. It could just use cbreak mode so as 34# not to force cs8 and let the hardware handle the parity. 35# login has to be rely on the hardware anyway. 36# 2. set PASS8, giving cs8 -parenb -istrip -inpck. 37# np:ep: same as np except inpck. 38# np:op: same as np:ep except for parodd (but parodd is overridden). 39# np:ap: same as np except istrip. 40# 41default:\ 42 :cb:ce:ck:lc:fd#1000:im=\r\n%s/%m (%h) (%t)\r\n\r\n:sp#1200:\ 43 :if=/etc/issue: 44 45# 46# Fixed speed entries 47# 48# The "std.NNN" names are known to the special case 49# portselector code in getty, however they can 50# be assigned to any table desired. 51# The "NNN-baud" names are known to the special case 52# autobaud code in getty, and likewise can 53# be assigned to any table desired (hopefully the same speed). 54# 55a|std.110|110-baud:\ 56 :np:nd#1:cd#1:uc:sp#110: 57b|std.134|134.5-baud:\ 58 :np:nd#1:cd#2:ff#1:td#1:sp#134:ht:nl: 591|std.150|150-baud:\ 60 :np:nd#1:cd#2:td#1:fd#1:sp#150:ht:nl:lm=\E\72\6\6\17login\72 : 61c|std.300|300-baud:\ 62 :np:nd#1:cd#1:sp#300: 63d|std.600|600-baud:\ 64 :np:nd#1:cd#1:sp#600: 65f|std.1200|1200-baud:\ 66 :np:fd#1:sp#1200: 676|std.2400|2400-baud:\ 68 :np:sp#2400: 697|std.4800|4800-baud:\ 70 :np:sp#4800: 712|std.9600|9600-baud:\ 72 :np:sp#9600: 73g|std.19200|19200-baud:\ 74 :np:sp#19200: 75std.38400|38400-baud:\ 76 :np:sp#38400: 77std.57600|57600-baud:\ 78 :np:sp#57600: 79std.115200|115200-baud:\ 80 :np:sp#115200: 81std.230400|230400-baud:\ 82 :np:sp#230400: 83 84# 85# Entry specifying explicit device settings. See termios(4) and 86# /usr/include/termios.h, too. The entry forces the tty into 87# CLOCAL mode (so no DCD is required), and uses Xon/Xoff flow control. 88# 89# cflags: CLOCAL | HUPCL | CREAD | CS8 90# oflags: OPOST | ONLCR | OXTABS 91# iflags: IXOFF | IXON | ICRNL | IGNPAR 92# lflags: IEXTEN | ICANON | ISIG | ECHOCTL | ECHO | ECHOK | ECHOE | ECHOKE 93# 94# The `0' flags don't have input enabled. The `1' flags don't echo. 95# (Echoing is done inside getty itself.) 96# 97local.9600|CLOCAL tty @ 9600 Bd:\ 98 :c0#0x0000c300:c1#0x0000cb00:c2#0x0000cb00:\ 99 :o0#0x00000007:o1#0x00000002:o2#0x00000007:\ 100 :i0#0x00000704:i1#0x00000000:i2#0x00000704:\ 101 :l0#0x000005cf:l1#0x00000000:l2#0x000005cf:\ 102 :sp#9600: 103 104# 105# Dial in rotary tables, speed selection via 'break' 106# 1070|d300|Dial-300:\ 108 :nx=d1200:cd#2:sp#300: 109d1200|Dial-1200:\ 110 :nx=d150:fd#1:sp#1200: 111d150|Dial-150:\ 112 :nx=d110:lm@:tc=150-baud: 113d110|Dial-110:\ 114 :nx=d300:tc=300-baud: 115 116# 117# Fast dialup terminals, 2400/1200/300 rotary (can start either way) 118# 119D2400|d2400|Fast-Dial-2400:\ 120 :nx=D1200:tc=2400-baud: 1213|D1200|Fast-Dial-1200:\ 122 :nx=D300:tc=1200-baud: 1235|D300|Fast-Dial-300:\ 124 :nx=D2400:tc=300-baud: 125 126# 127#telebit (19200) 128# 129t19200:\ 130 :nx=t2400:tc=19200-baud: 131t2400:\ 132 :nx=t1200:tc=2400-baud: 133t1200:\ 134 :nx=t19200:tc=1200-baud: 135 136# 137#telebit (9600) 138# 139t9600:\ 140 :nx=t2400a:tc=9600-baud: 141t2400a:\ 142 :nx=t1200a:tc=2400-baud: 143t1200a:\ 144 :nx=t9600:tc=1200-baud: 145 146# 147# Odd special case terminals 148# 149-|tty33|asr33|Pity the poor user of this beast:\ 150 :tc=110-baud: 151 1524|Console|Console Decwriter II:\ 153 :nd@:cd@:rw:tc=300-baud: 154 155e|Console-1200|Console Decwriter III:\ 156 :fd@:nd@:cd@:rw:tc=1200-baud: 157 158i|Interdata console:\ 159 :uc:sp#0: 160 161l|lsi chess terminal:\ 162 :sp#300: 163 164X|Xwindow|X window system:\ 165 :fd@:nd@:cd@:rw:sp#9600: 166 167P|Pc|Pc console:\ 168 :ht:np:sp#115200: 169 170# 171# Wierdo special case for fast crt's with hardcopy devices 172# 1738|T9600|CRT with hardcopy:\ 174 :nx=T300:tc=9600-baud: 1759|T300|CRT with hardcopy (300):\ 176 :nx=T9600:tc=300-baud: 177 178# 179# Plugboard, and misc other terminals 180# 181plug-9600|Plugboard-9600:\ 182 :pf#1:tc=9600-baud: 183p|P9600|Plugboard-9600-rotary:\ 184 :pf#1:nx=P300:tc=9600-baud: 185q|P300|Plugboard-300:\ 186 :pf#1:nx=P1200:tc=300-baud: 187r|P1200|Plugboard-1200:\ 188 :pf#1:nx=P9600:tc=1200-baud: 189 190# 191# XXXX Port selector 192# 193s|DSW|Port Selector:\ 194 :ps:sp#2400: 195 196# 197# Auto-baud speed detect entry for Micom 600. 198# Special code in getty will switch this out 199# to one of the NNN-baud entries. 200# 201A|Auto-baud:\ 202 :ab:sp#2400:f0#040: 203 204# 205# autologin - automatically log in as root 206# 207 208autologin|al.9600:\ 209 :al=root:tc=std.9600: 210al.19200:\ 211 :al=root:tc=std.19200: 212al.38400:\ 213 :al=root:tc=std.38400: 214al.57600:\ 215 :al=root:tc=std.57600: 216al.115200:\ 217 :al=root:tc=std.115200: 218al.230400:\ 219 :al=root:tc=std.230400: 220al.Pc:\ 221 :al=root:tc=Pc 222 223# 224# Entries for 3-wire serial terminals. These don't supply carrier, so 225# clocal needs to be set, and crtscts needs to be unset. 226# 2273wire.9600|9600-3wire:\ 228 :np:nc:sp#9600: 2293wire.19200|19200-3wire:\ 230 :np:nc:sp#19200: 2313wire.38400|38400-3wire:\ 232 :np:nc:sp#38400: 2333wire.57600|57600-3wire:\ 234 :np:nc:sp#57600: 2353wire.115200|115200-3wire:\ 236 :np:nc:sp#115200: 2373wire.230400|230400-3wire:\ 238 :np:nc:sp#230400: 239