1# 2# $FreeBSD: src/etc/modems,v 1.4 1999/08/27 23:23:42 peter Exp $ 3# $DragonFly: src/etc/modems,v 1.2 2003/06/17 04:24:45 dillon Exp $ 4# @(#)modems 3/24/95 5# 6# modems -- modem configuration data base file 7# see tip(1), modems(5) 8# 9# dial_command AT command to dial up remote 10# echo_off_command AT command to turn off command echo 11# escape_guard_time Shroud escape sequence with specified delay (ms) 12# escape_sequence Return to command escape sequence 13# hangup_command AT command to hangup modem 14# hw_flow_control Enable RTS/CTS flow control between DTE/DCE 15# intercharacter_delay Delay between characters sent to modem when issuing 16# commands 17# intercommand_delay Minimum delay between commands to modem 18# init_string AT command to initialize modem before dialing out 19# lock_baud Use fixed DTE / DCE bit rate 20# reset_delay Delay required by modem for reset 21# 22 23sportster|st|US Robotics Sportster 14.4K:dial_command=ATDT%s\r:hangup_command=ATH\r:\ 24 :echo_off_command=ATE0\r:reset_command=AT&F1\r:\ 25 :init_string=AT&B1&H1&R2&C1&D2\r:\ 26 :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\ 27 :intercommand_delay#250:escape_guard_time#500:reset_delay#2000: 28 29mt932|multitech|mt|Multitech 932:dial_command=ATDT%s\r:hangup_command=ATH\r:\ 30 :echo_off_command=ATE0\r:reset_command=ATZ\r:\ 31 :init_string=AT$BA0$SB38400&E1&E4&E13&E15Q0V1X4E0S0=0\r:\ 32 :escape_sequence=+++:hw_flow_control:lock_baud:intercharacter_delay#50:\ 33 :intercommand_delay#250:escape_guard_time#500:reset_delay#2000: 34 35generic|Generic AT command modem (use defaults): 36