1# @(#)printcap 5.3 (Berkeley) 6/30/90 2# $FreeBSD: src/etc/printcap,v 1.10.2.2 2002/08/07 10:33:39 blackend Exp $ 3# $DragonFly: src/etc/printcap,v 1.3 2008/02/11 15:59:37 matthias Exp $ 4 5# 6# This enables a simple local "raw" printer, hooked up to the first 7# parallel port. No kind of filtering is done, so everything you pass 8# to the "lpr" command will be printed unmodified. 9# 10# Remember, for further print queues you're going to add, you have 11# to choose different spool directories (the "sd" capability below), 12# otherwise you will greatly confuse lpd. 13# 14# For some advanced printing, have a look at the "apsfilter" package. 15# It plugs into the lpd system, allowing you to print a variety of 16# different file types by converting everything to PostScript(tm) 17# format. For more information about apsfilter visit 18# 19# http://www.apsfilter.org/ 20# 21# If you don't have a PostScript(tm) printer, don't panic, but do 22# also install the latest "ghostscript" package for best printer support. 23# 24# Do also refer to the "printing" section of the handbook. 25# 26# http://www.dragonflybsd.org/docs/handbook/handbook-printing/ 27# 28# Banner pages are now suppressed by default. Remove the :sh: capability 29# to turn them back on. 30# 31#lp|local line printer:\ 32# :sh:\ 33# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: 34# 35# Sample remote printer. The physical printer is on machine "lphost". 36# You can perform any kind of local filtering directly. If you need 37# local filters (e.g. LF -> CR-LF conversion for HP printers), create 38# a filter script that sends the proper escape sequence to the printer 39# and then concatenates stdin to stdout. 40# 41#remote|sample remote printer:\ 42# :sh:\ 43# :rm=lphost:sd=/var/spool/output/lphost:lf=/var/log/lpd-errs:\ 44# :if=/usr/local/libexec/if-script: 45# 46# Simple Russian printer with hardware CP866 character set, output filter 47# used for KOI8-R -> CP866 conversion 48# 49#lp|Russian local line printer:\ 50# :sh:of=/usr/libexec/lpr/ru/koi2alt:\ 51# :lp=/dev/lpt0:sd=/var/spool/output/lpd:lf=/var/log/lpd-errs: 52