xref: /dragonfly/include/Makefile (revision 0db87cb7)
1#	@(#)Makefile	8.2 (Berkeley) 1/4/94
2# $FreeBSD: src/include/Makefile,v 1.109.2.27 2003/01/24 05:12:29 sam Exp $
3#
4# Doing a make install builds /usr/include
5#
6# The ``rm -rf''s used below are safe because rm doesn't follow symbolic
7# links.
8
9CLEANFILES= osreldate.h version vers.c vers.txt
10SUBDIR= arpa protocols rpc rpcsvc xlocale
11INCS=	a.out.h ar.h assert.h bitstring.h cpio.h ctype.h db.h \
12	dirent.h disktab.h \
13	dlfcn.h elf.h elf-hints.h err.h float.h fmtmsg.h fnmatch.h fstab.h \
14	fts.h ftw.h getopt.h glob.h grp.h \
15	iconv.h ieeefp.h ifaddrs.h iso646.h inttypes.h \
16	langinfo.h libgen.h limits.h link.h locale.h malloc.h memory.h \
17	mntopts.h mpool.h mqueue.h monetary.h ndbm.h netconfig.h \
18	netdb.h nl_types.h nlist.h nss.h nsswitch.h objformat.h \
19	paths.h printf.h pthread.h pthread_np.h pwd.h \
20	ranlib.h readpassphrase.h \
21	res_update.h resolv.h re_comp.h rmd160.h \
22	runetype.h search.h setjmp.h sgtty.h \
23	signal.h spawn.h stab.h stdalign.h stdarg.h stdbool.h \
24	stddef.h stdint.h stdio.h stdlib.h stdnoreturn.h \
25	string.h stringlist.h strings.h struct.h sysexits.h \
26	tar.h time.h \
27	timeconv.h \
28	timers.h ttyent.h \
29	uchar.h unistd.h ulimit.h utime.h utmp.h utmpx.h \
30	uuid.h vis.h \
31	wchar.h wctype.h wordexp.h xlocale.h
32
33.if defined(WANT_HESIOD)
34INCS+=	hesiod.h
35.endif
36
37MHDRS=	varargs.h
38
39# Only for default SHARED=copies case
40SHDRS=	soundcard.h joystick.h
41
42LHDRS=	aio.h errno.h fcntl.h linker_set.h poll.h sched.h \
43	semaphore.h syslog.h termios.h ucontext.h
44
45# directories which also contain header files that need to be copied.
46# Other directories, like 'bus' and 'netproto', are created using mtree.
47#
48# XXX allow these directories to not contain header files.
49LDIRS=	net netbt netgraph netgraph7 netinet netinet6 sys vm
50
51# Subdirectories containing header files to copy.  In symlink mode
52# the subdirectory will be symlinked.  Care must be taken to adjust
53# LSYMSUBDIRS below to remove subdirectories whos parent directories.
54# If you make a mistake, part of your source tree might get overwritten
55# when buildworld is run.
56#
57LSUBDIRS= \
58	bus/cam bus/cam/scsi \
59	bus/cam bus/pccard bus/pci bus/isa bus/ppbus bus/smbus bus/u4b \
60	dev/disk/dm \
61	dev/disk/mpt/mpilib \
62	dev/misc/lpt dev/misc/ppi dev/misc/putter \
63	dev/netif/wi \
64	dev/raid/ciss dev/raid/mfi \
65	dev/smbus/smb \
66	dev/video/bktr dev/video/meteor \
67	emulation/linux \
68	gnu/vfs/ext2fs \
69	libprop \
70	net/bridge net/tap net/tun net/ppp net/ppp_layer net/sl \
71	net/pf net/altq \
72	net/vlan net/ipfw net/ip6fw net/dummynet net/sppp net/ip_mroute \
73	net/lagg \
74	netgraph/UI netgraph/async netgraph/bpf netgraph/bridge \
75	netgraph/cisco netgraph/echo netgraph/eiface netgraph/etf \
76	netgraph/ether netgraph/fec netgraph/frame_relay netgraph/hole \
77	netgraph/iface netgraph/ksocket netgraph/l2tp netgraph/lmi \
78	netgraph/mppc netgraph/one2many netgraph/ppp \
79	netgraph/pppoe netgraph/pptpgre netgraph/rfc1490 netgraph/socket \
80	netgraph/tee netgraph/tty netgraph/vjc \
81	netgraph7/UI netgraph7/async netgraph7/bpf \
82	netgraph7/bridge netgraph7/cisco netgraph7/deflate netgraph7/echo \
83	netgraph7/eiface netgraph7/etf netgraph7/ether \
84	netgraph7/frame_relay netgraph7/hole netgraph7/hub \
85	netgraph7/iface netgraph7/ksocket netgraph7/l2tp netgraph7/lmi \
86	netgraph7/mppc netgraph7/one2many netgraph7/ppp netgraph7/pppoe \
87	netgraph7/pptpgre netgraph7/rfc1490 netgraph7/socket \
88	netgraph7/tcpmss netgraph7/tee netgraph7/tty netgraph7/vjc \
89	netproto/ipsec netproto/802_11 netproto/mpls \
90	netproto/key netproto/smb \
91	vfs/isofs/cd9660 vfs/puffs \
92	vfs/msdosfs vfs/nfs vfs/ntfs \
93	vfs/smbfs vfs/udf vfs/ufs vfs/hammer vfs/hammer2
94
95# For SHARED=symlinks, bus/cam is a symlink, so cam/scsi is taken care of
96LSYMSUBDIRS=	${LSUBDIRS:Nbus/cam/scsi:Nnet/*:Nnetgraph/*:Nnetgraph7/*}
97
98# For obsolete headers which need to be removed
99RMHEADERS=	machine/ansi.h sys/inttypes.h
100
101# Define SHARED to indicate whether you want symbolic links to the system
102# source (``symlinks''), or a separate copy (``copies'').  ``symlinks'' is
103# probably only useful for developers and should be avoided if you do not
104# wish to tie your /usr/include and /usr/src together.
105#SHARED=	symlinks
106SHARED?=	copies
107
108INCS+=	osreldate.h
109
110osreldate.h:	${.CURDIR}/../sys/conf/newvers.sh \
111		${.CURDIR}/../sys/sys/param.h
112	@${ECHO} creating osreldate.h from newvers.sh
113	setvar PARAMFILE ${.CURDIR}/../sys/sys/param.h; \
114	. ${.CURDIR}/../sys/conf/newvers.sh;			\
115	echo "$$COPYRIGHT" > osreldate.h;			\
116	echo "#ifdef _KERNEL" >> osreldate.h;			\
117	echo '#error "osreldate.h must not be used in the kernel, use sys/param.h"' >> osreldate.h; \
118	echo "#else" >> osreldate.h;				\
119	echo "#undef __DragonFly_version" >> osreldate.h;	\
120	echo "#define __DragonFly_version $$RELDATE" >> osreldate.h; \
121	echo "#endif" >> osreldate.h
122
123.for i in ${LHDRS}
124INCSLINKS+=	sys/$i ${INCLUDEDIR}/$i
125.endfor
126.for i in ${MHDRS}
127INCSLINKS+=	machine/$i ${INCLUDEDIR}/$i
128.endfor
129INCSLINKS+=	bus/cam ${INCLUDEDIR}/cam
130INCSLINKS+=	vfs/msdosfs ${INCLUDEDIR}/msdosfs
131INCSLINKS+=	vfs/isofs ${INCLUDEDIR}/isofs
132INCSLINKS+=	vfs/mfs ${INCLUDEDIR}/mfs
133INCSLINKS+=	vfs/nfs ${INCLUDEDIR}/nfs
134INCSLINKS+=	vfs/ntfs ${INCLUDEDIR}/ntfs
135INCSLINKS+=	vfs ${INCLUDEDIR}/fs
136# this is for <ufs/ufs/...> and <ufs/ffs/...> paths used by ports
137# It is hopefully a temporary hack until we have environments working.
138INCSLINKS+=	vfs ${INCLUDEDIR}/ufs
139INCSLINKS+=	ufs ${INCLUDEDIR}/vfs/ffs
140INCSLINKS+=	emulation ${INCLUDEDIR}/compat
141INCSLINKS+=	netproto/ipsec ${INCLUDEDIR}/netipsec
142INCSLINKS+=	netproto/key ${INCLUDEDIR}/netkey
143INCSLINKS+=	netproto/smb ${INCLUDEDIR}/netsmb
144INCSLINKS+=	bus/pccard ${INCLUDEDIR}/pccard
145# Some 3rd party software looks for <floatingpoint.h>
146INCSLINKS+=	ieeefp.h ${INCLUDEDIR}/floatingpoint.h
147
148# NOTE!
149#
150# machine/ header files come from the platform architecture and
151# cpu/ header files come from the cpu architecture.  All code outside
152# of the machine header files ALWAYS #include's <machine/blah.h>.  So
153# if the platform architecture is missing a header file we have to
154# copy it in from the cpu architecture.  This way we do not have to
155# create dozens of pure forwarding headers for files that platform
156# architecture does not need to enhance.
157
158mtree_setup:
159.for i in ${LDIRS} ${LSYMSUBDIRS} machine cpu crypto dev/acpica
160	if [ -h ${DESTDIR}/usr/include/$i ]; then \
161		rm -f ${DESTDIR}/usr/include/$i; \
162	fi
163.endfor
164	mtree -deU -f ${.CURDIR}/../etc/mtree/BSD.include.dist \
165		-p ${DESTDIR}/usr/include
166
167copies:		mtree_setup
168.for i in ${LDIRS} ${LSUBDIRS}
169	cd ${.CURDIR}/../sys; \
170		${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 $i/*.h \
171		${DESTDIR}/usr/include/$i
172.endfor
173	cd ${.CURDIR}/../sys; \
174		${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 crypto/rijndael/rijndael.h \
175		${DESTDIR}/usr/include/crypto; \
176		${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 opencrypto/*.h \
177		${DESTDIR}/usr/include/crypto
178	cd ${.CURDIR}/../sys/dev/acpica; \
179		${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 acpiio.h \
180		${DESTDIR}/usr/include/dev/acpica
181.if exists(${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include)
182	cd ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include; \
183		${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \
184		${DESTDIR}/usr/include/cpu
185	# XXX this will cause quickworld to rebuild more junk
186	# then it needs to.
187	cpdup -o ${DESTDIR}/usr/include/cpu ${DESTDIR}/usr/include/machine
188.endif
189.if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include)
190	cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include; \
191		${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \
192		${DESTDIR}/usr/include/machine
193.if exists(${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc)
194	cd ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include/pc; \
195		${INSTALL} -C -o ${BINOWN} -g ${BINGRP} -m 444 *.h \
196		${DESTDIR}/usr/include/machine/pc
197.endif
198.endif
199.for i in ${SHDRS}
200	${LN} -sf ../sys/$i ${DESTDIR}/usr/include/machine/$i
201.endfor
202.for i in ${RMHEADERS}
203	rm -f ${DESTDIR}/usr/include/$i
204.endfor
205
206symlinks:	mtree_setup
207	@${ECHO} "Setting up symlinks to kernel source tree..."
208.for i in ${LDIRS}
209	rm -rf ${DESTDIR}/usr/include/$i
210	${LN} -s ../../sys/$i ${DESTDIR}/usr/include/$i
211.endfor
212	rm -rf ${DESTDIR}/usr/include/crypto
213	${LN} -s ../../sys/opencrypto ${DESTDIR}/usr/include/crypto
214.for i in ${LSYMSUBDIRS}
215	rm -rf ${DESTDIR}/usr/include/$i
216	${LN} -s ${i:C;[^/]+/?;../;g}../sys/$i ${DESTDIR}/usr/include/$i
217.endfor
218	rm -rf ${DESTDIR}/usr/include/cpu
219	${LN} -s ../../sys/cpu/${MACHINE_ARCH}/include ${DESTDIR}/usr/include/cpu
220	rm -rf ${DESTDIR}/usr/include/machine
221	cpdup ${.CURDIR}/../sys/cpu/${MACHINE_ARCH}/include \
222		${DESTDIR}/usr/include/machine
223	cpdup -o ${.CURDIR}/../sys/platform/${MACHINE_PLATFORM}/include \
224		${DESTDIR}/usr/include/machine
225
226.include <bsd.prog.mk>
227
228installincludes: ${SHARED}
229