xref: /dragonfly/libexec/dma/net.c (revision 0ca59c34)
1 /*
2  * Copyright (c) 2008-2014, Simon Schubert <2@0x2c.org>.
3  * Copyright (c) 2008 The DragonFly Project.  All rights reserved.
4  *
5  * This code is derived from software contributed to The DragonFly Project
6  * by Matthias Schmidt <matthias@dragonflybsd.org>, University of Marburg,
7  * Germany.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  *
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in
17  *    the documentation and/or other materials provided with the
18  *    distribution.
19  * 3. Neither the name of The DragonFly Project nor the names of its
20  *    contributors may be used to endorse or promote products derived
21  *    from this software without specific, prior written permission.
22  *
23  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
24  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
25  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
26  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
27  * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
28  * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
29  * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
30  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
31  * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
32  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
33  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
34  * SUCH DAMAGE.
35  */
36 
37 #include "dfcompat.h"
38 
39 #include <sys/param.h>
40 #include <sys/queue.h>
41 #include <sys/stat.h>
42 #include <sys/types.h>
43 #include <sys/socket.h>
44 #include <netinet/in.h>
45 #include <arpa/inet.h>
46 
47 #include <openssl/ssl.h>
48 #include <openssl/err.h>
49 
50 #include <ctype.h>
51 #include <err.h>
52 #include <errno.h>
53 #include <netdb.h>
54 #include <setjmp.h>
55 #include <signal.h>
56 #include <syslog.h>
57 #include <unistd.h>
58 
59 #include "dma.h"
60 
61 char neterr[ERRMSG_SIZE];
62 
63 char *
64 ssl_errstr(void)
65 {
66 	long oerr, nerr;
67 
68 	oerr = 0;
69 	while ((nerr = ERR_get_error()) != 0)
70 		oerr = nerr;
71 
72 	return (ERR_error_string(oerr, NULL));
73 }
74 
75 ssize_t
76 send_remote_command(int fd, const char* fmt, ...)
77 {
78 	va_list va;
79 	char cmd[4096];
80 	size_t len, pos;
81 	int s;
82 	ssize_t n;
83 
84 	va_start(va, fmt);
85 	s = vsnprintf(cmd, sizeof(cmd) - 2, fmt, va);
86 	va_end(va);
87 	if (s == sizeof(cmd) - 2 || s < 0) {
88 		strcpy(neterr, "Internal error: oversized command string");
89 		return (-1);
90 	}
91 
92 	/* We *know* there are at least two more bytes available */
93 	strcat(cmd, "\r\n");
94 	len = strlen(cmd);
95 
96 	if (((config.features & SECURETRANS) != 0) &&
97 	    ((config.features & NOSSL) == 0)) {
98 		while ((s = SSL_write(config.ssl, (const char*)cmd, len)) <= 0) {
99 			s = SSL_get_error(config.ssl, s);
100 			if (s != SSL_ERROR_WANT_READ &&
101 			    s != SSL_ERROR_WANT_WRITE) {
102 				strncpy(neterr, ssl_errstr(), sizeof(neterr));
103 				return (-1);
104 			}
105 		}
106 	}
107 	else {
108 		pos = 0;
109 		while (pos < len) {
110 			n = write(fd, cmd + pos, len - pos);
111 			if (n < 0)
112 				return (-1);
113 			pos += n;
114 		}
115 	}
116 
117 	return (len);
118 }
119 
120 int
121 read_remote(int fd, int extbufsize, char *extbuf)
122 {
123 	ssize_t rlen = 0;
124 	size_t pos, len, copysize;
125 	char buff[BUF_SIZE];
126 	int done = 0, status = 0, status_running = 0, extbufpos = 0;
127 	enum { parse_status, parse_spacedash, parse_rest } parsestate;
128 
129 	if (do_timeout(CON_TIMEOUT, 1) != 0) {
130 		snprintf(neterr, sizeof(neterr), "Timeout reached");
131 		return (-1);
132 	}
133 
134 	/*
135 	 * Remote reading code from femail.c written by Henning Brauer of
136 	 * OpenBSD and released under a BSD style license.
137 	 */
138 	len = 0;
139 	pos = 0;
140 	parsestate = parse_status;
141 	neterr[0] = 0;
142 	while (!(done && parsestate == parse_status)) {
143 		rlen = 0;
144 		if (pos == 0 ||
145 		    (pos > 0 && memchr(buff + pos, '\n', len - pos) == NULL)) {
146 			memmove(buff, buff + pos, len - pos);
147 			len -= pos;
148 			pos = 0;
149 			if (((config.features & SECURETRANS) != 0) &&
150 			    (config.features & NOSSL) == 0) {
151 				if ((rlen = SSL_read(config.ssl, buff + len, sizeof(buff) - len)) == -1) {
152 					strncpy(neterr, ssl_errstr(), sizeof(neterr));
153 					goto error;
154 				}
155 			} else {
156 				if ((rlen = read(fd, buff + len, sizeof(buff) - len)) == -1) {
157 					strncpy(neterr, strerror(errno), sizeof(neterr));
158 					goto error;
159 				}
160 			}
161 			len += rlen;
162 
163 			copysize = sizeof(neterr) - strlen(neterr) - 1;
164 			if (copysize > len)
165 				copysize = len;
166 			strncat(neterr, buff, copysize);
167 		}
168 		/*
169 		 * If there is an external buffer with a size bigger than zero
170 		 * and as long as there is space in the external buffer and
171 		 * there are new characters read from the mailserver
172 		 * copy them to the external buffer
173 		 */
174 		if (extbufpos <= (extbufsize - 1) && rlen > 0 && extbufsize > 0 && extbuf != NULL) {
175 			/* do not write over the bounds of the buffer */
176 			if(extbufpos + rlen > (extbufsize - 1)) {
177 				rlen = extbufsize - extbufpos;
178 			}
179 			memcpy(extbuf + extbufpos, buff + len - rlen, rlen);
180 			extbufpos += rlen;
181 		}
182 
183 		if (pos == len)
184 			continue;
185 
186 		switch (parsestate) {
187 		case parse_status:
188 			for (; pos < len; pos++) {
189 				if (isdigit(buff[pos])) {
190 					status_running = status_running * 10 + (buff[pos] - '0');
191 				} else {
192 					status = status_running;
193 					status_running = 0;
194 					parsestate = parse_spacedash;
195 					break;
196 				}
197 			}
198 			continue;
199 
200 		case parse_spacedash:
201 			switch (buff[pos]) {
202 			case ' ':
203 				done = 1;
204 				break;
205 
206 			case '-':
207 				/* ignore */
208 				/* XXX read capabilities */
209 				break;
210 
211 			default:
212 				strcpy(neterr, "invalid syntax in reply from server");
213 				goto error;
214 			}
215 
216 			pos++;
217 			parsestate = parse_rest;
218 			continue;
219 
220 		case parse_rest:
221 			/* skip up to \n */
222 			for (; pos < len; pos++) {
223 				if (buff[pos] == '\n') {
224 					pos++;
225 					parsestate = parse_status;
226 					break;
227 				}
228 			}
229 		}
230 
231 	}
232 
233 	do_timeout(0, 0);
234 
235 	/* chop off trailing newlines */
236 	while (neterr[0] != 0 && strchr("\r\n", neterr[strlen(neterr) - 1]) != 0)
237 		neterr[strlen(neterr) - 1] = 0;
238 
239 	return (status/100);
240 
241 error:
242 	do_timeout(0, 0);
243 	return (-1);
244 }
245 
246 /*
247  * Handle SMTP authentication
248  */
249 static int
250 smtp_login(int fd, char *login, char* password)
251 {
252 	char *temp;
253 	int len, res = 0;
254 
255 	res = smtp_auth_md5(fd, login, password);
256 	if (res == 0) {
257 		return (0);
258 	} else if (res == -2) {
259 	/*
260 	 * If the return code is -2, then then the login attempt failed,
261 	 * do not try other login mechanisms
262 	 */
263 		return (1);
264 	}
265 
266 	if ((config.features & INSECURE) != 0 ||
267 	    (config.features & SECURETRANS) != 0) {
268 		/* Send AUTH command according to RFC 2554 */
269 		send_remote_command(fd, "AUTH LOGIN");
270 		if (read_remote(fd, 0, NULL) != 3) {
271 			syslog(LOG_NOTICE, "remote delivery deferred:"
272 					" AUTH login not available: %s",
273 					neterr);
274 			return (1);
275 		}
276 
277 		len = base64_encode(login, strlen(login), &temp);
278 		if (len < 0) {
279 encerr:
280 			syslog(LOG_ERR, "can not encode auth reply: %m");
281 			return (1);
282 		}
283 
284 		send_remote_command(fd, "%s", temp);
285 		free(temp);
286 		res = read_remote(fd, 0, NULL);
287 		if (res != 3) {
288 			syslog(LOG_NOTICE, "remote delivery %s: AUTH login failed: %s",
289 			       res == 5 ? "failed" : "deferred", neterr);
290 			return (res == 5 ? -1 : 1);
291 		}
292 
293 		len = base64_encode(password, strlen(password), &temp);
294 		if (len < 0)
295 			goto encerr;
296 
297 		send_remote_command(fd, "%s", temp);
298 		free(temp);
299 		res = read_remote(fd, 0, NULL);
300 		if (res != 2) {
301 			syslog(LOG_NOTICE, "remote delivery %s: Authentication failed: %s",
302 					res == 5 ? "failed" : "deferred", neterr);
303 			return (res == 5 ? -1 : 1);
304 		}
305 	} else {
306 		syslog(LOG_WARNING, "non-encrypted SMTP login is disabled in config, so skipping it. ");
307 		return (1);
308 	}
309 
310 	return (0);
311 }
312 
313 static int
314 open_connection(struct mx_hostentry *h)
315 {
316 	int fd;
317 
318 	syslog(LOG_INFO, "trying remote delivery to %s [%s] pref %d",
319 	       h->host, h->addr, h->pref);
320 
321 	fd = socket(h->ai.ai_family, h->ai.ai_socktype, h->ai.ai_protocol);
322 	if (fd < 0) {
323 		syslog(LOG_INFO, "socket for %s [%s] failed: %m",
324 		       h->host, h->addr);
325 		return (-1);
326 	}
327 
328 	if (connect(fd, (struct sockaddr *)&h->sa, h->ai.ai_addrlen) < 0) {
329 		syslog(LOG_INFO, "connect to %s [%s] failed: %m",
330 		       h->host, h->addr);
331 		close(fd);
332 		return (-1);
333 	}
334 
335 	return (fd);
336 }
337 
338 static void
339 close_connection(int fd)
340 {
341 	if (config.ssl != NULL) {
342 		if (((config.features & SECURETRANS) != 0) &&
343 		    ((config.features & NOSSL) == 0))
344 			SSL_shutdown(config.ssl);
345 		SSL_free(config.ssl);
346 	}
347 
348 	close(fd);
349 }
350 
351 static int
352 deliver_to_host(struct qitem *it, struct mx_hostentry *host)
353 {
354 	struct authuser *a;
355 	char line[1000];
356 	size_t linelen;
357 	int fd, error = 0, do_auth = 0, res = 0;
358 
359 	if (fseek(it->mailf, 0, SEEK_SET) != 0) {
360 		snprintf(errmsg, sizeof(errmsg), "can not seek: %s", strerror(errno));
361 		return (-1);
362 	}
363 
364 	fd = open_connection(host);
365 	if (fd < 0)
366 		return (1);
367 
368 #define READ_REMOTE_CHECK(c, exp)	\
369 	res = read_remote(fd, 0, NULL); \
370 	if (res == 5) { \
371 		syslog(LOG_ERR, "remote delivery to %s [%s] failed after %s: %s", \
372 		       host->host, host->addr, c, neterr); \
373 		snprintf(errmsg, sizeof(errmsg), "%s [%s] did not like our %s:\n%s", \
374 			 host->host, host->addr, c, neterr); \
375 		return (-1); \
376 	} else if (res != exp) { \
377 		syslog(LOG_NOTICE, "remote delivery deferred: %s [%s] failed after %s: %s", \
378 		       host->host, host->addr, c, neterr); \
379 		return (1); \
380 	}
381 
382 	/* Check first reply from remote host */
383 	if ((config.features & SECURETRANS) == 0 ||
384 	    (config.features & STARTTLS) != 0) {
385 		config.features |= NOSSL;
386 		READ_REMOTE_CHECK("connect", 2);
387 
388 		config.features &= ~NOSSL;
389 	}
390 
391 	if ((config.features & SECURETRANS) != 0) {
392 		error = smtp_init_crypto(fd, config.features);
393 		if (error == 0)
394 			syslog(LOG_DEBUG, "SSL initialization successful");
395 		else
396 			goto out;
397 
398 		if ((config.features & STARTTLS) == 0)
399 			READ_REMOTE_CHECK("connect", 2);
400 	}
401 
402 	/* XXX allow HELO fallback */
403 	/* XXX record ESMTP keywords */
404 	send_remote_command(fd, "EHLO %s", hostname());
405 	READ_REMOTE_CHECK("EHLO", 2);
406 
407 	/*
408 	 * Use SMTP authentication if the user defined an entry for the remote
409 	 * or smarthost
410 	 */
411 	SLIST_FOREACH(a, &authusers, next) {
412 		if (strcmp(a->host, host->host) == 0) {
413 			do_auth = 1;
414 			break;
415 		}
416 	}
417 
418 	if (do_auth == 1) {
419 		/*
420 		 * Check if the user wants plain text login without using
421 		 * encryption.
422 		 */
423 		syslog(LOG_INFO, "using SMTP authentication for user %s", a->login);
424 		error = smtp_login(fd, a->login, a->password);
425 		if (error < 0) {
426 			syslog(LOG_ERR, "remote delivery failed:"
427 					" SMTP login failed: %m");
428 			snprintf(errmsg, sizeof(errmsg), "SMTP login to %s failed", host->host);
429 			return (-1);
430 		}
431 		/* SMTP login is not available, so try without */
432 		else if (error > 0) {
433 			syslog(LOG_WARNING, "SMTP login not available. Trying without.");
434 		}
435 	}
436 
437 	/* XXX send ESMTP ENVID, RET (FULL/HDRS) and 8BITMIME */
438 	send_remote_command(fd, "MAIL FROM:<%s>", it->sender);
439 	READ_REMOTE_CHECK("MAIL FROM", 2);
440 
441 	/* XXX send ESMTP ORCPT */
442 	send_remote_command(fd, "RCPT TO:<%s>", it->addr);
443 	READ_REMOTE_CHECK("RCPT TO", 2);
444 
445 	send_remote_command(fd, "DATA");
446 	READ_REMOTE_CHECK("DATA", 3);
447 
448 	error = 0;
449 	while (!feof(it->mailf)) {
450 		if (fgets(line, sizeof(line), it->mailf) == NULL)
451 			break;
452 		linelen = strlen(line);
453 		if (linelen == 0 || line[linelen - 1] != '\n') {
454 			syslog(LOG_CRIT, "remote delivery failed: corrupted queue file");
455 			snprintf(errmsg, sizeof(errmsg), "corrupted queue file");
456 			error = -1;
457 			goto out;
458 		}
459 
460 		/* Remove trailing \n's and escape leading dots */
461 		trim_line(line);
462 
463 		/*
464 		 * If the first character is a dot, we escape it so the line
465 		 * length increases
466 		*/
467 		if (line[0] == '.')
468 			linelen++;
469 
470 		if (send_remote_command(fd, "%s", line) != (ssize_t)linelen+1) {
471 			syslog(LOG_NOTICE, "remote delivery deferred: write error");
472 			error = 1;
473 			goto out;
474 		}
475 	}
476 
477 	send_remote_command(fd, ".");
478 	READ_REMOTE_CHECK("final DATA", 2);
479 
480 	send_remote_command(fd, "QUIT");
481 	if (read_remote(fd, 0, NULL) != 2)
482 		syslog(LOG_INFO, "remote delivery succeeded but QUIT failed: %s", neterr);
483 out:
484 
485 	close_connection(fd);
486 	return (error);
487 }
488 
489 int
490 deliver_remote(struct qitem *it)
491 {
492 	struct mx_hostentry *hosts, *h;
493 	const char *host;
494 	int port;
495 	int error = 1, smarthost = 0;
496 
497 	port = SMTP_PORT;
498 
499 	/* Smarthost support? */
500 	if (config.smarthost != NULL) {
501 		host = config.smarthost;
502 		port = config.port;
503 		syslog(LOG_INFO, "using smarthost (%s:%i)", host, port);
504 		smarthost = 1;
505 	} else {
506 		host = strrchr(it->addr, '@');
507 		/* Should not happen */
508 		if (host == NULL) {
509 			snprintf(errmsg, sizeof(errmsg), "Internal error: badly formed address %s",
510 				 it->addr);
511 			return(-1);
512 		} else {
513 			/* Step over the @ */
514 			host++;
515 		}
516 	}
517 
518 	error = dns_get_mx_list(host, port, &hosts, smarthost);
519 	if (error) {
520 		snprintf(errmsg, sizeof(errmsg), "DNS lookup failure: host %s not found", host);
521 		syslog(LOG_NOTICE, "remote delivery %s: DNS lookup failure: host %s not found",
522 		       error < 0 ? "failed" : "deferred",
523 		       host);
524 		return (error);
525 	}
526 
527 	for (h = hosts; *h->host != 0; h++) {
528 		switch (deliver_to_host(it, h)) {
529 		case 0:
530 			/* success */
531 			error = 0;
532 			goto out;
533 		case 1:
534 			/* temp failure */
535 			error = 1;
536 			break;
537 		default:
538 			/* perm failure */
539 			error = -1;
540 			goto out;
541 		}
542 	}
543 out:
544 	free(hosts);
545 
546 	return (error);
547 }
548