14e04bc29SMatthew Dillon# Example disklabel for ad0s1. Once initialized via the instructions in 24e04bc29SMatthew Dillon# the README you can edit the label and create partitions for your 34e04bc29SMatthew Dillon# filesystems. The top of the disklabel should already contain reasonable 44e04bc29SMatthew Dillon# values so you should only have to edit the bottom part. Here is an example 54e04bc29SMatthew Dillon# 64e04bc29SMatthew Dillon 74e04bc29SMatthew Dillon8 partitions: 84e04bc29SMatthew Dillon# size offset fstype [fsize bsize bps/cpg] 9b6a0a5cfSMatthew Dillon a: 256m 0 4.2BSD 1024 8192 99 104e04bc29SMatthew Dillon b: 1024m * swap 114e04bc29SMatthew Dillon c: <leave this line untouched> 12b6a0a5cfSMatthew Dillon d: 256m * 4.2BSD 1024 8192 99 13b6a0a5cfSMatthew Dillon e: 256m * 4.2BSD 1024 8192 99 14b6a0a5cfSMatthew Dillon f: 8192m * 4.2BSD 2048 16384 99 15b6a0a5cfSMatthew Dillon g: * * 4.2BSD 2048 16384 99 164e04bc29SMatthew Dillon 174e04bc29SMatthew Dillon# The disklabel program accepts 'm' for megabytes, and '*' to auto-fill-in 184e04bc29SMatthew Dillon# the offset. A '*' in the size field means 'the rest of the disk'. 194e04bc29SMatthew Dillon# disklabel may get confused due to there being too many '*'s in which case 204e04bc29SMatthew Dillon# just remove the g: partition, generate the disklabel, then edit it again 214e04bc29SMatthew Dillon# and g back in. 224e04bc29SMatthew Dillon# 234e04bc29SMatthew Dillon# ad0s1a: / 24*dda92f98SSascha Wildner# ad0s1b: swap (suggest no less than 256m and at least 1xmain-memory) 254e04bc29SMatthew Dillon# ad0s1c: (represents the whole-disk, generally leave this one alone) 264e04bc29SMatthew Dillon# ad0s1d: /var 274e04bc29SMatthew Dillon# ad0s1e: /tmp 28*dda92f98SSascha Wildner# ad0s1f: /usr (suggest no less than 4096m but 1024m ok in a crunch) 294e04bc29SMatthew Dillon# ad0s1g: /home (all remaining disk space) 304e04bc29SMatthew Dillon# ad0s1h: (unused) 31