1# Example disklabel for ad0s1. Once initialized via the instructions in 2# the README you can edit the label and create partitions for your 3# filesystems. The top of the disklabel should already contain reasonable 4# values so you should only have to edit the bottom part. Here is an example 5# 6 78 partitions: 8# size offset fstype [fsize bsize bps/cpg] 9 a: 256m 0 4.2BSD 1024 8192 99 10 b: 1024m * swap 11 c: <leave this line untouched> 12 d: 256m * 4.2BSD 1024 8192 99 13 e: 256m * 4.2BSD 1024 8192 99 14 f: 8192m * 4.2BSD 2048 16384 99 15 g: * * 4.2BSD 2048 16384 99 16 17# The disklabel program accepts 'm' for megabytes, and '*' to auto-fill-in 18# the offset. A '*' in the size field means 'the rest of the disk'. 19# disklabel may get confused due to there being too many '*'s in which case 20# just remove the g: partition, generate the disklabel, then edit it again 21# and g back in. 22# 23# ad0s1a: / 24# ad0s1b: swap (suggest no less than 256m and at least 1xmain-memory) 25# ad0s1c: (represents the whole-disk, generally leave this one alone) 26# ad0s1d: /var 27# ad0s1e: /tmp 28# ad0s1f: /usr (suggest no less than 4096m but 1024m ok in a crunch) 29# ad0s1g: /home (all remaining disk space) 30# ad0s1h: (unused) 31