1 /* 2 * Copyright (c) 2011-2019 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@dragonflybsd.org> 6 * by Venkatesh Srinivas <vsrinivas@dragonflybsd.org> 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in 16 * the documentation and/or other materials provided with the 17 * distribution. 18 * 3. Neither the name of The DragonFly Project nor the names of its 19 * contributors may be used to endorse or promote products derived 20 * from this software without specific, prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 23 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 25 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 26 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 28 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 30 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 31 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 32 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 33 * SUCH DAMAGE. 34 */ 35 36 #include "hammer2.h" 37 38 int DebugOpt; 39 int VerboseOpt; 40 int QuietOpt; 41 int ForceOpt; 42 int RecurseOpt; 43 int NormalExit = 1; /* if set to 0 main() has to pthread_exit() */ 44 size_t MemOpt; 45 46 static void usage(int code); 47 48 int 49 main(int ac, char **av) 50 { 51 char *sel_path = NULL; 52 const char *uuid_str = NULL; 53 const char *arg; 54 char *opt; 55 int pfs_type = HAMMER2_PFSTYPE_NONE; 56 int all_opt = 0; 57 int ecode = 0; 58 int ch; 59 60 srandomdev(); 61 signal(SIGPIPE, SIG_IGN); 62 dmsg_crypto_setup(); 63 64 /* 65 * Core options 66 */ 67 while ((ch = getopt(ac, av, "adfm:rs:t:u:vq")) != -1) { 68 switch(ch) { 69 case 'a': 70 all_opt = 1; 71 break; 72 case 'd': 73 if (DebugOpt) 74 ++DMsgDebugOpt; 75 DebugOpt = 1; 76 break; 77 case 'f': 78 ForceOpt = 1; 79 break; 80 case 'm': 81 MemOpt = strtoul(optarg, &opt, 0); 82 switch(*opt) { 83 case 'g': 84 case 'G': 85 MemOpt *= 1024; 86 /* FALLTHROUGH */ 87 case 'm': 88 case 'M': 89 MemOpt *= 1024; 90 /* FALLTHROUGH */ 91 case 'k': 92 case 'K': 93 MemOpt *= 1024; 94 break; 95 case 0: 96 break; 97 default: 98 fprintf(stderr, "-m: Unrecognized suffix\n"); 99 usage(1); 100 break; 101 } 102 break; 103 case 'r': 104 RecurseOpt = 1; 105 break; 106 case 's': 107 sel_path = strdup(optarg); 108 break; 109 case 't': 110 /* 111 * set node type for mkpfs 112 */ 113 if (strcasecmp(optarg, "CACHE") == 0) { 114 pfs_type = HAMMER2_PFSTYPE_CACHE; 115 } else if (strcasecmp(optarg, "DUMMY") == 0) { 116 pfs_type = HAMMER2_PFSTYPE_DUMMY; 117 } else if (strcasecmp(optarg, "SLAVE") == 0) { 118 pfs_type = HAMMER2_PFSTYPE_SLAVE; 119 } else if (strcasecmp(optarg, "SOFT_SLAVE") == 0) { 120 pfs_type = HAMMER2_PFSTYPE_SOFT_SLAVE; 121 } else if (strcasecmp(optarg, "SOFT_MASTER") == 0) { 122 pfs_type = HAMMER2_PFSTYPE_SOFT_MASTER; 123 } else if (strcasecmp(optarg, "MASTER") == 0) { 124 pfs_type = HAMMER2_PFSTYPE_MASTER; 125 } else { 126 fprintf(stderr, "-t: Unrecognized node type\n"); 127 usage(1); 128 } 129 break; 130 case 'u': 131 /* 132 * set uuid for mkpfs, else one will be generated 133 * (required for all except the MASTER node_type) 134 */ 135 uuid_str = optarg; 136 break; 137 case 'v': 138 if (QuietOpt) 139 --QuietOpt; 140 else 141 ++VerboseOpt; 142 break; 143 case 'q': 144 if (VerboseOpt) 145 --VerboseOpt; 146 else 147 ++QuietOpt; 148 break; 149 default: 150 fprintf(stderr, "Unknown option: %c\n", ch); 151 usage(1); 152 /* not reached */ 153 break; 154 } 155 } 156 157 /* 158 * Adjust, then process the command 159 */ 160 ac -= optind; 161 av += optind; 162 if (ac < 1) { 163 fprintf(stderr, "Missing command\n"); 164 usage(1); 165 /* not reached */ 166 } 167 168 if (strcmp(av[0], "connect") == 0) { 169 /* 170 * Add cluster connection 171 */ 172 if (ac < 2) { 173 fprintf(stderr, "connect: missing argument\n"); 174 usage(1); 175 } 176 ecode = cmd_remote_connect(sel_path, av[1]); 177 } else if (strcmp(av[0], "dumpchain") == 0) { 178 if (ac < 2) 179 ecode = cmd_dumpchain(".", (u_int)-1); 180 else if (ac < 3) 181 ecode = cmd_dumpchain(av[1], (u_int)-1); 182 else 183 ecode = cmd_dumpchain(av[1], 184 (u_int)strtoul(av[2], NULL, 0)); 185 } else if (strcmp(av[0], "debugspan") == 0) { 186 /* 187 * Debug connection to the target hammer2 service and run 188 * the CONN/SPAN protocol. 189 */ 190 if (ac < 2) { 191 fprintf(stderr, "debugspan: requires hostname\n"); 192 usage(1); 193 } 194 ecode = cmd_debugspan(av[1]); 195 } else if (strcmp(av[0], "disconnect") == 0) { 196 /* 197 * Remove cluster connection 198 */ 199 if (ac < 2) { 200 fprintf(stderr, "disconnect: missing argument\n"); 201 usage(1); 202 } 203 ecode = cmd_remote_disconnect(sel_path, av[1]); 204 } else if (strcmp(av[0], "destroy") == 0) { 205 if (ac < 2) { 206 fprintf(stderr, 207 "destroy: specify one or more paths to " 208 "destroy\n"); 209 usage(1); 210 } 211 ecode = cmd_destroy_path(ac - 1, (const char **)(void *)&av[1]); 212 } else if (strcmp(av[0], "destroy-inum") == 0) { 213 if (ac < 2) { 214 fprintf(stderr, 215 "destroy-inum: specify one or more inode " 216 "numbers to destroy\n"); 217 usage(1); 218 } 219 ecode = cmd_destroy_inum(sel_path, ac - 1, 220 (const char **)(void *)&av[1]); 221 } else if (strcmp(av[0], "emergency-mode-enable") == 0) { 222 ecode = cmd_emergency_mode(sel_path, 1, ac - 1, 223 (const char **)(void *)&av[1]); 224 } else if (strcmp(av[0], "emergency-mode-disable") == 0) { 225 ecode = cmd_emergency_mode(sel_path, 0, ac - 1, 226 (const char **)(void *)&av[1]); 227 } else if (strcmp(av[0], "growfs") == 0) { 228 ecode = cmd_growfs(sel_path, ac - 1, 229 (const char **)(void *)&av[1]); 230 } else if (strcmp(av[0], "hash") == 0) { 231 ecode = cmd_hash(ac - 1, (const char **)(void *)&av[1]); 232 } else if (strcmp(av[0], "dhash") == 0) { 233 ecode = cmd_dhash(ac - 1, (const char **)(void *)&av[1]); 234 } else if (strcmp(av[0], "info") == 0) { 235 ecode = cmd_info(ac - 1, (const char **)(void *)&av[1]); 236 } else if (strcmp(av[0], "mountall") == 0) { 237 ecode = cmd_mountall(ac - 1, (const char **)(void *)&av[1]); 238 } else if (strcmp(av[0], "status") == 0) { 239 /* 240 * Get status of PFS and its connections (-a for all PFSs) 241 */ 242 if (ac < 2) { 243 ecode = cmd_remote_status(sel_path, all_opt); 244 } else { 245 int i; 246 for (i = 1; i < ac; ++i) 247 ecode = cmd_remote_status(av[i], all_opt); 248 } 249 } else if (strcmp(av[0], "pfs-clid") == 0) { 250 /* 251 * Print cluster id (uuid) for specific PFS 252 */ 253 if (ac < 2) { 254 fprintf(stderr, "pfs-clid: requires name\n"); 255 usage(1); 256 } 257 ecode = cmd_pfs_getid(sel_path, av[1], 0); 258 } else if (strcmp(av[0], "pfs-fsid") == 0) { 259 /* 260 * Print private id (uuid) for specific PFS 261 */ 262 if (ac < 2) { 263 fprintf(stderr, "pfs-fsid: requires name\n"); 264 usage(1); 265 } 266 ecode = cmd_pfs_getid(sel_path, av[1], 1); 267 } else if (strcmp(av[0], "pfs-list") == 0) { 268 /* 269 * List all PFSs 270 */ 271 if (ac >= 2) { 272 ecode = cmd_pfs_list(ac - 1, 273 (char **)(void *)&av[1]); 274 } else { 275 ecode = cmd_pfs_list(1, &sel_path); 276 } 277 } else if (strcmp(av[0], "pfs-create") == 0) { 278 /* 279 * Create new PFS using pfs_type 280 */ 281 if (ac < 2) { 282 fprintf(stderr, "pfs-create: requires name\n"); 283 usage(1); 284 } 285 ecode = cmd_pfs_create(sel_path, av[1], pfs_type, uuid_str); 286 } else if (strcmp(av[0], "pfs-delete") == 0) { 287 /* 288 * Delete a PFS by name 289 */ 290 if (ac < 2) { 291 fprintf(stderr, "pfs-delete: requires name\n"); 292 usage(1); 293 } 294 ecode = cmd_pfs_delete(sel_path, av, ac); 295 } else if (strcmp(av[0], "snapshot") == 0 || 296 strcmp(av[0], "snapshot-debug") == 0) { 297 /* 298 * Create snapshot with optional pfs-type and optional 299 * label override. 300 */ 301 uint32_t flags = 0; 302 303 if (strcmp(av[0], "snapshot-debug") == 0) 304 flags = HAMMER2_PFSFLAGS_NOSYNC; 305 306 if (ac > 3) { 307 fprintf(stderr, "%s: too many arguments\n", av[0]); 308 usage(1); 309 } 310 switch(ac) { 311 case 1: 312 ecode = cmd_pfs_snapshot(sel_path, NULL, NULL, flags); 313 break; 314 case 2: 315 ecode = cmd_pfs_snapshot(sel_path, av[1], NULL, flags); 316 break; 317 case 3: 318 ecode = cmd_pfs_snapshot(sel_path, av[1], av[2], flags); 319 break; 320 } 321 } else if (strcmp(av[0], "service") == 0) { 322 /* 323 * Start the service daemon. This daemon accepts 324 * connections from local and remote clients, handles 325 * the security handshake, and manages the core messaging 326 * protocol. 327 */ 328 ecode = cmd_service(); 329 } else if (strcmp(av[0], "stat") == 0) { 330 ecode = cmd_stat(ac - 1, (const char **)(void *)&av[1]); 331 } else if (strcmp(av[0], "leaf") == 0) { 332 /* 333 * Start the management daemon for a specific PFS. 334 * 335 * This will typically connect to the local master node 336 * daemon, register the PFS, and then pass its side of 337 * the socket descriptor to the kernel HAMMER2 VFS via an 338 * ioctl(). The process and/or thread context remains in the 339 * kernel until the PFS is unmounted or the connection is 340 * lost, then returns from the ioctl. 341 * 342 * It is possible to connect directly to a remote master node 343 * instead of the local master node in situations where 344 * encryption is not desired or no local master node is 345 * desired. This is not recommended because it represents 346 * a single point of failure for the PFS's communications. 347 * 348 * Direct kernel<->kernel communication between HAMMER2 VFSs 349 * is theoretically possible for directly-connected 350 * registrations (i.e. where the spanning tree is degenerate), 351 * but not recommended. We specifically try to reduce the 352 * complexity of the HAMMER2 VFS kernel code. 353 */ 354 ecode = cmd_leaf(sel_path); 355 } else if (strcmp(av[0], "shell") == 0) { 356 /* 357 * Connect to the command line monitor in the hammer2 master 358 * node for the machine using HAMMER2_DBG_SHELL messages. 359 */ 360 ecode = cmd_shell((ac < 2) ? NULL : av[1]); 361 } else if (strcmp(av[0], "rsainit") == 0) { 362 /* 363 * Initialize a RSA keypair. If no target directory is 364 * specified we default to "/etc/hammer2". 365 */ 366 arg = (ac < 2) ? HAMMER2_DEFAULT_DIR : av[1]; 367 ecode = cmd_rsainit(arg); 368 } else if (strcmp(av[0], "rsaenc") == 0) { 369 /* 370 * Encrypt the input symmetrically by running it through 371 * the specified public and/or private key files. 372 * 373 * If no key files are specified data is encoded using 374 * "/etc/hammer2/rsa.pub". 375 * 376 * WARNING: no padding is added, data stream must contain 377 * random padding for this to be secure. 378 * 379 * Used for debugging only 380 */ 381 if (ac == 1) { 382 const char *rsapath = HAMMER2_DEFAULT_DIR "/rsa.pub"; 383 ecode = cmd_rsaenc(&rsapath, 1); 384 } else { 385 ecode = cmd_rsaenc((const char **)(void *)&av[1], 386 ac - 1); 387 } 388 } else if (strcmp(av[0], "rsadec") == 0) { 389 /* 390 * Decrypt the input symmetrically by running it through 391 * the specified public and/or private key files. 392 * 393 * If no key files are specified data is decoded using 394 * "/etc/hammer2/rsa.prv". 395 * 396 * WARNING: no padding is added, data stream must contain 397 * random padding for this to be secure. 398 * 399 * Used for debugging only 400 */ 401 if (ac == 1) { 402 const char *rsapath = HAMMER2_DEFAULT_DIR "/rsa.prv"; 403 ecode = cmd_rsadec(&rsapath, 1); 404 } else { 405 ecode = cmd_rsadec((const char **)(void *)&av[1], 406 ac - 1); 407 } 408 } else if (strcmp(av[0], "show") == 0) { 409 /* 410 * Raw dump of filesystem. Use -v to check all crc's, and 411 * -vv to dump bulk file data. 412 */ 413 if (ac != 2) { 414 fprintf(stderr, "show: requires device path\n"); 415 usage(1); 416 } else { 417 cmd_show(av[1], 0); 418 } 419 } else if (strcmp(av[0], "freemap") == 0) { 420 /* 421 * Raw dump of freemap. Use -v to check all crc's, and 422 * -vv to dump bulk file data. 423 */ 424 if (ac != 2) { 425 fprintf(stderr, "freemap: requires device path\n"); 426 usage(1); 427 } else { 428 cmd_show(av[1], 1); 429 } 430 } else if (strcmp(av[0], "volhdr") == 0) { 431 /* 432 * Dump the volume header. 433 */ 434 if (ac != 2) { 435 fprintf(stderr, "volhdr: requires device path\n"); 436 usage(1); 437 } else { 438 cmd_show(av[1], 2); 439 } 440 } else if (strcmp(av[0], "setcomp") == 0) { 441 if (ac < 3) { 442 /* 443 * Missing compression method and at least one 444 * path. 445 */ 446 fprintf(stderr, 447 "setcomp: requires compression method and " 448 "directory/file path\n"); 449 usage(1); 450 } else { 451 /* 452 * Multiple paths may be specified 453 */ 454 ecode = cmd_setcomp(av[1], &av[2]); 455 } 456 } else if (strcmp(av[0], "setcheck") == 0) { 457 if (ac < 3) { 458 /* 459 * Missing compression method and at least one 460 * path. 461 */ 462 fprintf(stderr, 463 "setcheck: requires check code method and " 464 "directory/file path\n"); 465 usage(1); 466 } else { 467 /* 468 * Multiple paths may be specified 469 */ 470 ecode = cmd_setcheck(av[1], &av[2]); 471 } 472 } else if (strcmp(av[0], "clrcheck") == 0) { 473 ecode = cmd_setcheck("none", &av[1]); 474 } else if (strcmp(av[0], "setcrc32") == 0) { 475 ecode = cmd_setcheck("crc32", &av[1]); 476 } else if (strcmp(av[0], "setxxhash64") == 0) { 477 ecode = cmd_setcheck("xxhash64", &av[1]); 478 } else if (strcmp(av[0], "setsha192") == 0) { 479 ecode = cmd_setcheck("sha192", &av[1]); 480 } else if (strcmp(av[0], "printinode") == 0) { 481 if (ac != 2) { 482 fprintf(stderr, 483 "printinode: requires directory/file path\n"); 484 usage(1); 485 } else { 486 print_inode(av[1]); 487 } 488 } else if (strcmp(av[0], "bulkfree") == 0) { 489 if (ac != 2) { 490 fprintf(stderr, "bulkfree: requires path to mount\n"); 491 usage(1); 492 } else { 493 ecode = cmd_bulkfree(av[1]); 494 } 495 #if 0 496 } else if (strcmp(av[0], "bulkfree-async") == 0) { 497 if (ac != 2) { 498 fprintf(stderr, 499 "bulkfree-async: requires path to mount\n"); 500 usage(1); 501 } else { 502 ecode = cmd_bulkfree_async(av[1]); 503 } 504 #endif 505 } else if (strcmp(av[0], "cleanup") == 0) { 506 ecode = cmd_cleanup(av[1]); /* can be NULL */ 507 } else { 508 fprintf(stderr, "Unrecognized command: %s\n", av[0]); 509 usage(1); 510 } 511 512 /* 513 * In DebugMode we may wind up starting several pthreads in the 514 * original process, in which case we have to let them run and 515 * not actually exit. 516 */ 517 if (NormalExit) { 518 return (ecode); 519 } else { 520 pthread_exit(NULL); 521 _exit(2); /* NOT REACHED */ 522 } 523 } 524 525 static 526 void 527 usage(int code) 528 { 529 fprintf(stderr, 530 "hammer2 [options] command [argument ...]\n" 531 " -s path Select filesystem\n" 532 " -t type PFS type for pfs-create\n" 533 " -u uuid uuid for pfs-create\n" 534 " -m mem[k,m,g] buffer memory (bulkfree)\n" 535 "\n" 536 " cleanup [<path>] " 537 "Run cleanup passes\n" 538 " connect <target> " 539 "Add cluster link\n" 540 " destroy <path>... " 541 "Destroy directory entries (only use if inode bad)\n" 542 " destroy-inum <inum>... " 543 "Destroy inodes (only use if inode bad)\n" 544 " disconnect <target> " 545 "Del cluster link\n" 546 " emergency-mode-enable <target> " 547 "Enable emergency operations mode on filesystem\n" 548 " " 549 "THIS IS A VERY DANGEROUS MODE\n" 550 " emergency-mode-disable <target> " 551 "Disable emergency operations mode on filesystem\n" 552 " info [<devpath>...] " 553 "Info on all offline or online H2 partitions\n" 554 " mountall [<devpath>...] " 555 "Mount @LOCAL for all H2 partitions\n" 556 " status [<path>...] " 557 "Report active cluster status\n" 558 " hash [<filename>...] " 559 "Print directory hash (key) for name\n" 560 " dhash [<filename>...] " 561 "Print data hash for long directory entry\n" 562 " pfs-list [<path>...] " 563 "List PFSs\n" 564 " pfs-clid <label> " 565 "Print cluster id for specific PFS\n" 566 " pfs-fsid <label> " 567 "Print private id for specific PFS\n" 568 " pfs-create <label> " 569 "Create a PFS\n" 570 " pfs-delete <label> " 571 "Destroy a PFS\n" 572 " snapshot <path> [<label>] " 573 "Snapshot a PFS or directory\n" 574 " snapshot-debug <path> [<label>] " 575 "Snapshot without filesystem sync\n" 576 " service " 577 "Start service daemon\n" 578 " stat [<path>...] " 579 "Return inode quota & config\n" 580 " leaf " 581 "Start pfs leaf daemon\n" 582 " shell [<host>] " 583 "Connect to debug shell\n" 584 " debugspan <target> " 585 "Connect to target, run CONN/SPAN\n" 586 " growfs [<path...] " 587 "Grow a filesystem into resized partition\n" 588 " rsainit [<path>] " 589 "Initialize rsa fields\n" 590 " show <devpath> " 591 "Raw hammer2 media dump for topology\n" 592 " freemap <devpath> " 593 "Raw hammer2 media dump for freemap\n" 594 " volhdr <devpath> " 595 "Raw hammer2 media dump for the volume header(s)\n" 596 " setcomp <comp[:level]> <path>... " 597 "Set comp algo {none, autozero, lz4, zlib} & level\n" 598 " setcheck <check> <path>... " 599 "Set check algo {none, crc32, xxhash64, sha192}\n" 600 " clrcheck [<path>...] " 601 "Clear check code override\n" 602 " setcrc32 [<path>...] " 603 "Set check algo to crc32\n" 604 " setxxhash64 [<path>...] " 605 "Set check algo to xxhash64\n" 606 " setsha192 [<path>...] " 607 "Set check algo to sha192\n" 608 " bulkfree <path> " 609 "Run bulkfree pass\n" 610 " printinode <path> " 611 "Dump inode\n" 612 " dumpchain [<path> [<chnflags>]] " 613 "Dump in-memory chain topology (ONFLUSH flag is 0x200)\n" 614 #if 0 615 " bulkfree-async path " 616 "Run bulkfree pass asynchronously\n" 617 #endif 618 ); 619 exit(code); 620 } 621