1.\" $NetBSD: isp.4,v 1.5 1999/12/18 18:33:05 mjacob Exp $ 2.\" 3.\" Copyright (c) 1998, 1999, 2001 4.\" Matthew Jacob, for NASA/Ames Research Center 5.\" 6.\" Redistribution and use in source and binary forms, with or without 7.\" modification, are permitted provided that the following conditions 8.\" are met: 9.\" 1. Redistributions of source code must retain the above copyright 10.\" notice, this list of conditions and the following disclaimer. 11.\" 2. Redistributions in binary form must reproduce the above copyright 12.\" notice, this list of conditions and the following disclaimer in the 13.\" documentation and/or other materials provided with the distribution. 14.\" 3. The name of the author may not be used to endorse or promote products 15.\" derived from this software without specific prior written permission. 16.\" 17.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 18.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 19.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 20.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 21.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 22.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 23.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 24.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 25.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 26.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 27.\" 28.\" Additional Copyright (c) 2006 by Marcus Alves Grando 29.\" 30.\" $FreeBSD: src/share/man/man4/isp.4,v 1.29 2010/10/08 12:40:16 uqs Exp $ 31.\" 32.Dd April 7, 2012 33.Dt ISP 4 34.Os 35.Sh NAME 36.Nm isp 37.Nd Qlogic based SCSI and FibreChannel SCSI Host Adapters 38.Sh SYNOPSIS 39To compile this driver into the kernel, 40place the following lines in your 41kernel configuration file: 42.Bd -ragged -offset indent 43.Cd "device scbus" 44.Cd "device isp" 45.Ed 46.Pp 47Alternatively, to load the driver as a 48module at boot time, place the following line in 49.Xr loader.conf 5 : 50.Bd -literal -offset indent 51isp_load="YES" 52.Ed 53.Sh DESCRIPTION 54This driver provides access to 55.Tn SCSI 56or 57.Tn FibreChannel 58devices. 59.Pp 60SCSI features include support for Ultra SCSI and wide mode transactions 61for 62.Tn SCSI , 63Ultra2 LVD (for the ISP1080 and ISP1280), and Ultra3 LVD (for the 64ISP12160). 65.Pp 66Fibre Channel support uses FCP SCSI profile for 67.Tn FibreChannel . 68and utilizes Class 3 and Class 2 connections (Qlogic 2100 is Class 693 only, minor patches to the Qlogic 2200 to force Class 2 mode). 70Support is available for Public and Private loops, and for 71point-to-point connections (Qlogic 2200 only). 72The newer 2-Gigabit cards (2300, 2312, 2322) and 4-Gigabit (2422, 2432) 73are also supported. 74Command tagging is 75supported for all (in fact, 76.Tn FibreChannel 77requires tagging). 78Fabric support is enabled by default for other than 2100 cards. 79Fabric 80support for 2100 cards has been so problematic and these cards are so 81old now that it is just not worth your time to try it. 82.Sh FIRMWARE 83Firmware is available if the 84.Xr ispfw 4 85module is loaded during bootstrap (q.v.). 86.Pp 87It is 88.Ar strongly 89recommended that you use the firmware available 90from 91.Xr ispfw 4 92as it is the most likely to have been tested with this driver. 93.Sh HARDWARE 94Cards supported by the 95.Nm 96driver include: 97.Bl -tag -width xxxxxx -offset indent 98.It ISP1000 99SBus Fast Wide, Ultra Fast Wide cards, Single Ended or Differential 100cards. 101.It ISP1020 102Qlogic 1020 Fast Wide and Differential Fast Wide PCI cards. 103.It ISP1040 104Qlogic 1040 Ultra Wide and Differential Ultra Wide PCI cards. 105Also known as the DEC KZPBA-CA (single ended) and KZPBA-CB (HVD differential). 106.It Qlogic 1240 107Qlogic 1240 Dual Bus Ultra Wide and Differential Ultra Wide PCI 108cards. 109.It Qlogic 1020 110Qlogic 1020 SCSI cards. 111.It Qlogic 1040 112Qlogic 1040 Ultra SCSI cards. 113.It Qlogic 1080 114Qlogic 1280 LVD Ultra2 Wide PCI cards. 115.It Qlogic 1280 116Qlogic 1280 Dual Bus LVD Ultra2 Wide PCI cards. 117.It Qlogic 12160 118Qlogic 12160 Dual Bus LVD Ultra3 Wide PCI cards. 119.It Qlogic 210X 120Qlogic 2100 and 2100A Copper and Optical Fibre Channel Arbitrated 121Loop (single, dual). 122.It Qlogic 220X 123Qlogic 2200 Copper and Optical Fibre Channel Arbitrated Loop PCI 124cards (single, dual, quad). 125.It Qlogic 2300 126Qlogic 2300 Optical Fibre Channel PCI cards. 127.It Qlogic 2312 128Qlogic 2312 Optical Fibre Channel PCI cards. 129.It Qlogic 234X 130Qlogic 234X Optical Fibre Channel PCI cards (2312 chipset, single and dual attach). 131.It Qlogic 2322 132Qlogic 2322 Optical Fibre Channel PCIe cards. 133.It Qlogic 200 134Dell Branded version of the QLogic 2312 Fibre Channel PCI cards. 135.It Qlogic 2422 136Qlogic 2422 Optical Fibre Channel PCI cards (4 Gigabit) 137.It Qlogic 2432 138Qlogic 2432 Optical Fibre Channel PCIe cards (4 Gigabit) 139.El 140.Sh CONFIGURATION OPTIONS 141Target mode support may be enabled with the 142.Pp 143.Cd options ISP_TARGET_MODE 144.Pp 145option. 146.Sh BOOT OPTIONS 147The following options are switchable by setting values in 148.Pa /boot/device.hints . 149.Pp 150They are: 151.Bl -tag -width indent 152.It Va hint.isp.0.disable 153A hint value to disable driver in kernel. 154.It Va hint.isp.0.fwload_disable 155A hint value to disable loading of firmware 156.Xr ispfw 4 . 157.It Va hint.isp.0.prefer_memmap 158A hint value to use PCI memory space instead of I/O space 159access for. 160.It Va hint.isp.0.prefer_iomap 161A hint value to use PCI I/O space instead of Memory space 162access for. 163.It Va hint.isp.0.ignore_nvram 164A hint value to ignore board NVRAM settings for. 165Otherwise use NVRAM settings. 166.It Va hint.isp.0.fullduplex 167A hint value to set full duplex mode. 168.It Va hint.isp.0.topology 169A hint value to select topology of connection. 170Supported values are: 171.Pp 172.Bl -tag -width ".Li lport-only" -compact 173.It Li lport 174Prefer loopback and fallback to point to point. 175.It Li nport 176Prefer point to point and fallback to loopback. 177.It Li lport-only 178Loopback only. 179.It Li nport-only 180Point to point only. 181.El 182.It Va hint.isp.0.portwwn 183This should be the full 64 bit World Wide Port Name you would like 184to use, overriding the value in NVRAM for the card. 185.It Va hint.isp.0.nodewwn 186This should be the full 64 bit World Wide Node Name you would like 187to use, overriding the value in NVRAM for the card. 188.It Va hint.isp.0.iid 189A hint to override or set the Initiator ID or Loop ID. 190For Fibre Channel 191cards in Local Loop topologies it is 192.Ar strongly 193recommended that you set this value to non-zero. 194.It Va hint.isp.0.role 195A hint to define default role for isp instance (target, initiator, both). 196.It Va hint.isp.0.debug 197A hint value for a driver debug level (see the file 198.Pa /usr/src/sys/dev/isp/ispvar.h 199for the values. 200.El 201.Pp 202By default, the driver will use MSI if it is supported. 203This behavior can be turned off by setting the following tunable: 204.Bd -literal -offset indent 205hw.isp.msi.enable=0 206.Ed 207.Sh SYSCTL OPTIONS 208.Bl -tag -width indent 209.It Va dev.isp.N.loop_down_limit 210This value says how long to wait in seconds after loop has gone down before 211giving up and expiring all of the devices that were visible. 212The default is 300 seconds (5 minutes). 213A separate (nonadjustable) timeout is used when 214booting to not stop booting on lack of FC connectivity. 215.It Va dev.isp.N.gone_device_time 216This value says how long to wait for devices to reappear if they (temporarily) 217disappear due to loop or fabric events. 218While this timeout is running, I/O 219to those devices will simply be held. 220.It Va dev.isp.N.wwnn 221This is the readonly World Wide Node Name value for this port. 222.It Va dev.isp.N.wwpn 223This is the readonly World Wide Port Name value for this port. 224.El 225.Sh SEE ALSO 226.Xr da 4 , 227.Xr intro 4 , 228.Xr ispfw 4 , 229.Xr sa 4 , 230.Xr scsi 4 231.Sh AUTHORS 232The 233.Nm 234driver was written by Matthew Jacob originally for 235.Nx 236at NASA/Ames Research Center. 237.Sh BUGS 238The driver currently ignores some NVRAM settings. 239.Pp 240Target mode support is not completely reliable yet. 241It works reasonably 242well for Fibre Channel, somewhat well for Qlogic 1040 cards, but 243does not yet work for the other cards (due to last minute unannounced 244changes in firmware interfaces). 245