man/man4/isp.4

.\"     $NetBSD: isp.4,v 1.5 1999/12/18 18:33:05 mjacob Exp $
.\"
.\" Copyright (c) 1998, 1999, 2001
.\"     Matthew Jacob, for NASA/Ames Research Center
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. The name of the author may not be used to endorse or promote products
.\"    derived from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" Additional Copyright (c) 2006 by Marcus Alves Grando
.\"
.\" $FreeBSD: src/share/man/man4/isp.4,v 1.29 2010/10/08 12:40:16 uqs Exp $
.\"
.Dd January 3, 2012
.Dt ISP 4
.Os
.Sh NAME
.Nm isp
.Nd Qlogic based SCSI and FibreChannel SCSI Host Adapters
.Sh SYNOPSIS
To compile this driver into the kernel,
place the following lines in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device scbus"
.Cd "device isp"
.Ed
.Pp
Alternatively, to load the driver as a
module at boot time, place the following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
isp_load="YES"
.Ed
.Sh DESCRIPTION
This driver provides access to
.Tn SCSI
or
.Tn FibreChannel
devices.
.Pp
SCSI features include support for Ultra SCSI and wide mode transactions
for
.Tn SCSI ,
Ultra2 LVD (for the ISP1080 and ISP1280), and Ultra3 LVD (for the
ISP12160).
.Pp
Fibre Channel support uses FCP SCSI profile for
.Tn FibreChannel .
and utilizes Class 3 and Class 2 connections (Qlogic 2100 is Class
3 only, minor patches to the Qlogic 2200 to force Class 2 mode).
Support is available for Public and Private loops, and for
point-to-point connections (Qlogic 2200 only).
The newer 2-Gigabit cards (2300, 2312, 2322) and 4-Gigabit (2422, 2432)
are also supported.
Command tagging is
supported for all (in fact,
.Tn FibreChannel
requires tagging).
Fabric support is enabled by default for other than 2100 cards.
Fabric
support for 2100 cards has been so problematic and these cards are so
old now that it is just not worth your time to try it.
.Sh FIRMWARE
Firmware is available if the
.Xr ispfw 4
module is loaded during bootstrap (q.v.).
.Pp
It is
.Ar strongly
recommended that you use the firmware available
from
.Xr ispfw 4
as it is the most likely to have been tested with this driver.
.Sh HARDWARE
Cards supported by the
.Nm
driver include:
.Bl -tag -width xxxxxx -offset indent
.It ISP1000
SBus Fast Wide, Ultra Fast Wide cards, Single Ended or Differential
cards.
.It ISP1020
Qlogic 1020 Fast Wide and Differential Fast Wide PCI cards.
.It ISP1040
Qlogic 1040 Ultra Wide and Differential Ultra Wide PCI cards.
Also known as the DEC KZPBA-CA (single ended) and KZPBA-CB (HVD differential).
.It Qlogic 1240
Qlogic 1240 Dual Bus Ultra Wide and Differential Ultra Wide PCI
cards.
.It Qlogic 1020
Qlogic 1020 SCSI cards.
.It Qlogic 1040
Qlogic 1040 Ultra SCSI cards.
.It Qlogic 1080
Qlogic 1280 LVD Ultra2 Wide PCI cards.
.It Qlogic 1280
Qlogic 1280 Dual Bus LVD Ultra2 Wide PCI cards.
.It Qlogic 12160
Qlogic 12160 Dual Bus LVD Ultra3 Wide PCI cards.
.It Qlogic 210X
Qlogic 2100 and 2100A Copper and Optical Fibre Channel Arbitrated
Loop (single, dual).
.It Qlogic 220X
Qlogic 2200 Copper and Optical Fibre Channel Arbitrated Loop PCI
cards (single, dual, quad).
.It Qlogic 2300
Qlogic 2300 Optical Fibre Channel PCI cards.
.It Qlogic 2312
Qlogic 2312 Optical Fibre Channel PCI cards.
.It Qlogic 234X
Qlogic 234X Optical Fibre Channel PCI cards (2312 chipset, single and dual attach).
.It Qlogic 2322
Qlogic 2322 Optical Fibre Channel PCIe cards.
.It Qlogic 200
Dell Branded version of the QLogic 2312 Fibre Channel PCI cards.
.It Qlogic 2422
Qlogic 2422 Optical Fibre Channel PCI cards (4 Gigabit)
.It Qlogic 2432
Qlogic 2432 Optical Fibre Channel PCIe cards (4 Gigabit)
.El
.Sh CONFIGURATION OPTIONS
Target mode support may be enabled with the
.Pp
.Cd options ISP_TARGET_MODE
.Pp
option.
.Sh BOOT OPTIONS
The following options are switchable by setting values in
.Pa /boot/device.hints .
.Pp
They are:
.Bl -tag -width indent
.It Va hint.isp.0.disable
A hint value to disable driver in kernel.
.It Va hint.isp.0.fwload_disable
A hint value to disable loading of firmware
.Xr ispfw 4 .
.It Va hint.isp.0.prefer_memmap
A hint value to use PCI memory space instead of I/O space
access for.
.It Va hint.isp.0.prefer_iomap
A hint value to use PCI I/O space instead of Memory space
access for.
.It Va hint.isp.0.ignore_nvram
A hint value to ignore board NVRAM settings for.
Otherwise use NVRAM settings.
.It Va hint.isp.0.fullduplex
A hint value to set full duplex mode.
.It Va hint.isp.0.topology
A hint value to select topology of connection.
Supported values are:
.Pp
.Bl -tag -width ".Li lport-only" -compact
.It Li lport
Prefer loopback and fallback to point to point.
.It Li nport
Prefer point to point and fallback to loopback.
.It Li lport-only
Loopback only.
.It Li nport-only
Point to point only.
.El
.It Va hint.isp.0.portwwn
This should be the full 64 bit World Wide Port Name you would like
to use, overriding the value in NVRAM for the card.
.It Va hint.isp.0.nodewwn
This should be the full 64 bit World Wide Node Name you would like
to use, overriding the value in NVRAM for the card.
.It Va hint.isp.0.iid
A hint to override or set the Initiator ID or Loop ID.
For Fibre Channel
cards in Local Loop topologies it is
.Ar strongly
recommended that you set this value to non-zero.
.It Va hint.isp.0.role
A hint to define default role for isp instance (target, initiator, both).
.It Va hint.isp.0.debug
A hint value for a driver debug level (see the file
.Pa /usr/src/sys/dev/isp/ispvar.h
for the values.
.El
.Sh SYSCTL OPTIONS
.Bl -tag -width indent
.It Va dev.isp.N.loop_down_limit
This value says how long to wait in seconds after loop has gone down before
giving up and expiring all of the devices that were visible.
The default is 300 seconds (5 minutes).
A separate (nonadjustable) timeout is used when
booting to not stop booting on lack of FC connectivity.
.It Va dev.isp.N.gone_device_time
This value says how long to wait for devices to reappear if they (temporarily)
disappear due to loop or fabric events.
While this timeout is running, I/O
to those devices will simply be held.
.It Va dev.isp.N.wwnn
This is the readonly World Wide Node Name value for this port.
.It Va dev.isp.N.wwpn
This is the readonly World Wide Port Name value for this port.
.El
.Sh SEE ALSO
.Xr da 4 ,
.Xr intro 4 ,
.Xr ispfw 4 ,
.Xr sa 4 ,
.Xr scsi 4
.Sh AUTHORS
The
.Nm
driver was written by Matthew Jacob originally for
.Nx
at NASA/Ames Research Center.
.Sh BUGS
The driver currently ignores some NVRAM settings.
.Pp
Target mode support is not completely reliable yet.
It works reasonably
well for Fibre Channel, somewhat well for Qlogic 1040 cards, but
does not yet work for the other cards (due to last minute unannounced
changes in firmware interfaces).