1.\" Copyright (c) Berkeley Software Design, Inc. 2.\" Copyright (c) 1997, 1998, 1999, 2000 3.\" Bill Paul <wpaul@osd.bsdi.com>. All rights reserved. 4.\" 5.\" Redistribution and use in source and binary forms, with or without 6.\" modification, are permitted provided that the following conditions 7.\" are met: 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in the 12.\" documentation and/or other materials provided with the distribution. 13.\" 3. All advertising materials mentioning features or use of this software 14.\" must display the following acknowledgement: 15.\" This product includes software developed by Bill Paul. 16.\" 4. Neither the name of the author nor the names of any co-contributors 17.\" may be used to endorse or promote products derived from this software 18.\" without specific prior written permission. 19.\" 20.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30.\" THE POSSIBILITY OF SUCH DAMAGE. 31.\" 32.\" $FreeBSD: src/share/man/man4/pcn.4,v 1.3.2.5 2003/02/17 21:20:39 trhodes Exp $ 33.\" $DragonFly: src/share/man/man4/pcn.4,v 1.2 2003/06/17 04:36:59 dillon Exp $ 34.\" 35.Dd September 18, 2000 36.Dt PCN 4 37.Os 38.Sh NAME 39.Nm pcn 40.Nd "AMD PCnet/PCI fast ethernet device driver" 41.Sh SYNOPSIS 42.Cd "device miibus" 43.Cd "device pcn" 44.Sh DESCRIPTION 45The 46.Nm 47driver provides support for PCI ethernet adapters and embedded 48controllers based on the AMD PCnet/FAST, PCnet/FAST+, PCnet/FAST III, 49PCnet/PRO and PCnet/Home ethernet controller chips. 50.Pp 51The PCnet/PCI chips include a 100Mbps ethernet MAC and support 52both a serial and MII-compliant transceiver interface. 53They use a bus master DMA and a scatter/gather descriptor scheme. 54The AMD chips provide a mechanism for zero-copy receive, 55providing good performance in server environments. 56Receive address filtering is provided using a single perfect filter entry 57for the station address and a 64-bit multicast hash table. 58.Pp 59The 60.Nm 61driver supports the following media types: 62.Pp 63.Bl -tag -width 10baseTXUTP 64.It autoselect 65Enable autoselection of the media type and options. 66The user can manually override 67the autoselected mode by adding media options to 68.Xr rc.conf 5 . 69.It 10baseT/UTP 70Set 10Mbps operation. 71The 72.Xr ifconfig 8 73.Cm mediaopt 74option can also be used to select either 75.Sq full-duplex 76or 77.Sq half-duplex 78modes. 79.It 100baseTX 80Set 100Mbps (fast ethernet) operation. 81The 82.Xr ifconfig 8 83.Cm mediaopt 84option can also be used to select either 85.Sq full-duplex 86or 87.Sq half-duplex 88modes. 89.El 90.Pp 91The 92.Nm 93driver supports the following media options: 94.Pp 95.Bl -tag -width full-duplex 96.It full-duplex 97Force full duplex operation 98.It half-duplex 99Force half duplex operation. 100.El 101.Pp 102For more information on configuring this device, see 103.Xr ifconfig 8 . 104.Sh DIAGNOSTICS 105.Bl -diag 106.It "pcn%d: couldn't map ports/memory" 107A fatal initialization error has occurred. 108.It "pcn%d: couldn't map interrupt" 109A fatal initialization error has occurred. 110.It "pcn%d: watchdog timeout" 111The device has stopped responding to the network, or there is a problem with 112the network connection (e.g. a cable fault). 113.It "pcn%d: no memory for rx list" 114The driver failed to allocate an mbuf for the receiver ring. 115.It "pcn%d: no memory for tx list" 116The driver failed to allocate an mbuf for the transmitter ring when 117allocating a pad buffer or collapsing an mbuf chain into a clusisr. 118.It "pcn%d: chip is in D3 power state -- setting to D0" 119This message applies only to adapters which support power 120management. 121Some operating systems place the controller in low power 122mode when shutting down, and some PCI BIOSes fail to bring the chip 123out of this state before configuring it. 124The controller loses all of 125its PCI configuration in the D3 state, so if the BIOS does not set 126it back to full power mode in time, it will not be able to configure it 127correctly. 128The driver tries to detect this condition and bring 129the adapter back to the D0 (full power) state, but this may not be 130enough to return the driver to a fully operational condition. 131If 132you see this message at boot time and the driver fails to attach 133the device as a network interface, you will have to perform a 134warm boot to have the device properly configured. 135.Pp 136Note that this condition only occurs when warm booting from another 137operating system. 138If you power down your system prior to booting 139.Fx , 140the card should be configured correctly. 141.El 142.Sh SEE ALSO 143.Xr arp 4 , 144.Xr miibus 4 , 145.Xr netintro 4 , 146.Xr ng_ether 4 , 147.Xr ifconfig 8 148.Rs 149.%T AMD PCnet/FAST, PCnet/FAST+ and PCnet/Home datasheets 150.%O http://www.amd.com 151.Re 152.Sh HISTORY 153The 154.Nm 155device driver first appeared in 156.Fx 4.3 . 157.Sh AUTHORS 158The 159.Nm 160driver was written by 161.An Bill Paul Aq wpaul@osd.bsdi.com . 162