1.\" Copyright (c) 1997, 1998, 1999 2.\" Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 1. Redistributions of source code must retain the above copyright 8.\" notice, this list of conditions and the following disclaimer. 9.\" 2. Redistributions in binary form must reproduce the above copyright 10.\" notice, this list of conditions and the following disclaimer in the 11.\" documentation and/or other materials provided with the distribution. 12.\" 3. All advertising materials mentioning features or use of this software 13.\" must display the following acknowledgement: 14.\" This product includes software developed by Bill Paul. 15.\" 4. Neither the name of the author nor the names of any co-contributors 16.\" may be used to endorse or promote products derived from this software 17.\" without specific prior written permission. 18.\" 19.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 20.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 21.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 22.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 23.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 29.\" THE POSSIBILITY OF SUCH DAMAGE. 30.\" 31.\" $FreeBSD: src/share/man/man4/ti.4,v 1.7.2.5 2001/08/17 13:08:39 ru Exp $ 32.\" $DragonFly: src/share/man/man4/ti.4,v 1.3 2007/02/25 12:03:07 swildner Exp $ 33.\" 34.Dd March 4, 1999 35.Dt TI 4 36.Os 37.Sh NAME 38.Nm ti 39.Nd "Alteon Networks Tigon I and Tigon II gigabit ethernet driver" 40.Sh SYNOPSIS 41.Cd "device ti" 42.Sh DESCRIPTION 43The 44.Nm 45driver provides support for PCI gigabit ethernet adapters based on 46the Alteon Networks Tigon gigabit ethernet controller chip. 47The Tigon 48contains an embedded R4000 CPU, gigabit MAC, dual DMA channels and 49a PCI interface unit. 50The Tigon II contains two R4000 CPUs and other 51refinements. 52Either chip can be used in either a 32-bit or 64-bit PCI 53slot. 54Communication with the chip is achieved via PCI shared memory 55and bus master DMA. 56The Tigon I and II support hardware multicast 57address filtering, VLAN tag extraction and insertion, and jumbo 58ethernet frames sizes up to 9000 bytes. 59Note that the Tigon I chipset 60is no longer in active production: all new adapters should come equipped 61with Tigon II chipsets. 62.Pp 63There are several PCI boards available from both Alteon and other 64vendors that use the Tigon chipset under OEM contract. 65The 66.Nm 67driver has been tested with the following Tigon-based adapters: 68.Pp 69.Bl -bullet -compact -offset indent 70.It 71The Alteon AceNIC V gigabit ethernet adapter (1000baseSX) 72.It 73The Alteon AceNIC V gigabit ethernet adapter (1000baseT) 74.It 75The 3Com 3c985-SX gigabit ethernet adapter (Tigon 1) 76.It 77The 3Com 3c985B-SX gigabit ethernet adapter (Tigon 2) 78.It 79The Netgear GA620 gigabit ethernet adapter (1000baseSX) 80.It 81The Netgear GA620T gigabit ethernet adapter (1000baseT) 82.El 83.Pp 84The following should also be supported but have not yet been tested: 85.Pp 86.Bl -bullet -compact -offset indent 87.It 88The Digital EtherWORKS 1000SX PCI Gigabit Adapter 89.It 90Silicon Graphics PCI gigabit ethernet adapter 91.It 92Farallon PN9000SX Gigabit Ethernet adapter 93.El 94.Pp 95While the Tigon chipset supports 10, 100 and 1000Mbps speeds, support for 9610 and 100Mbps speeds is only available on boards with the proper 97transceivers. 98Most adapters are only designed to work at 1000Mbps, 99however the driver should support those NICs that work at lower speeds 100as well. 101.Pp 102Support for jumbo frames is provided via the interface MTU setting. 103Selecting an MTU larger than 1500 bytes with the 104.Xr ifconfig 8 105utility configures the adapter to receive and transmit jumbo frames. 106Using jumbo frames can greatly improve performance for certain tasks, 107such as file transfers and data streaming. 108.Pp 109Support for vlans is also available using the 110.Xr vlan 4 111mechanism. 112See the 113.Xr vlan 4 114man page for more details. 115.Pp 116The 117.Nm 118driver supports the following media types: 119.Pp 120.Bl -tag -width xxxxxxxxxxxxxxxxxxxx 121.It autoselect 122Enable autoselection of the media type and options. 123The user can manually override 124the autoselected mode by adding media options to the 125.Pa /etc/rc.conf 126file. 127.It 10baseT/UTP 128Set 10Mbps operation. 129The 130.Ar mediaopt 131option can also be used to select either 132.Ar full-duplex 133or 134.Ar half-duplex 135modes. 136.It 100baseTX 137Set 100Mbps (fast ethernet) operation. 138The 139.Ar mediaopt 140option can also be used to select either 141.Ar full-duplex 142or 143.Ar half-duplex 144modes. 145.It 1000baseSX 146Set 1000Mbps (gigabit ethernet) operation. 147Only full 148.Ar full-duplex 149mode is supported at this speed. 150.El 151.Pp 152The 153.Nm 154driver supports the following media options: 155.Pp 156.Bl -tag -width xxxxxxxxxxxxxxxxxxxx 157.It full-duplex 158Force full duplex operation 159.It half-duplex 160Force half duplex operation. 161.El 162.Pp 163For more information on configuring this device, see 164.Xr ifconfig 8 . 165.Sh DIAGNOSTICS 166.Bl -diag 167.It "ti%d: couldn't map memory" 168A fatal initialization error has occurred. 169.It "ti%d: couldn't map interrupt" 170A fatal initialization error has occurred. 171.It "ti%d: no memory for softc struct!" 172The driver failed to allocate memory for per-device instance information 173during initialization. 174.It "ti%d: failed to enable memory mapping!" 175The driver failed to initialize PCI shared memory mapping. 176This might 177happen if the card is not in a bus-master slot. 178.It "ti%d: no memory for jumbo buffers!" 179The driver failed to allocate memory for jumbo frames during 180initialization. 181.It "ti%d: bios thinks we're in a 64 bit slot, but we aren't" 182The BIOS has programmed the NIC as though it had been installed in 183a 64-bit PCI slot, but in fact the NIC is in a 32-bit slot. 184This happens 185as a result of a bug in some BIOSes. 186This can be worked around on the 187Tigon II, but on the Tigon I initialization will fail. 188.It "ti%d: board self-diagnostics failed!" 189The ROMFAIL bit in the CPU state register was set after system 190startup, indicating that the on-board NIC diagnostics failed. 191.It "ti%d: unknown hwrev" 192The driver detected a board with an unsupported hardware revision. 193The 194.Nm 195driver supports revision 4 (Tigon 1) and revision 6 (Tigon 2) chips 196and has firmware only for those devices. 197.It "ti%d: watchdog timeout" 198The device has stopped responding to the network, or there is a problem with 199the network connection (cable). 200.El 201.Sh SEE ALSO 202.Xr arp 4 , 203.Xr ifmedia 4 , 204.Xr netintro 4 , 205.Xr ng_ether 4 , 206.Xr vlan 4 , 207.Xr ifconfig 8 208.Rs 209.%T Alteon Gigabit Ethernet/PCI NIC manuals 210.%O http://sanjose.alteon.com/open.shtml 211.Re 212.Sh HISTORY 213The 214.Nm 215device driver first appeared in 216.Fx 3.0 . 217.Sh AUTHORS 218The 219.Nm 220driver was written by 221.An Bill Paul Aq wpaul@bsdi.com . 222