1.\" 2.\" Copyright (c) 2006 The DragonFly Project. All rights reserved. 3.\" 4.\" Redistribution and use in source and binary forms, with or without 5.\" modification, are permitted provided that the following conditions 6.\" are met: 7.\" 8.\" 1. Redistributions of source code must retain the above copyright 9.\" notice, this list of conditions and the following disclaimer. 10.\" 2. Redistributions in binary form must reproduce the above copyright 11.\" notice, this list of conditions and the following disclaimer in 12.\" the documentation and/or other materials provided with the 13.\" distribution. 14.\" 3. Neither the name of The DragonFly Project nor the names of its 15.\" contributors may be used to endorse or promote products derived 16.\" from this software without specific, prior written permission. 17.\" 18.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 19.\" ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 20.\" LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 21.\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 22.\" COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 23.\" INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 24.\" BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 25.\" LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 26.\" AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 27.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 28.\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 29.\" SUCH DAMAGE. 30.\" 31.\" $FreeBSD: src/share/man/man7/release.7,v 1.3.2.6 2003/04/12 20:42:30 murray Exp $ 32.\" 33.Dd March 3, 2020 34.Dt NRELEASE 7 35.Os 36.Sh NAME 37.Nm nrelease 38.Nd release building infrastructure 39.Sh DESCRIPTION 40.Dx 41provides a complete build environment suitable for users to make 42full releases of the 43.Dx 44operating system. 45All of the tools necessary to build releases are available from the 46git repository in 47.Pa src/nrelease . 48A complete release (that is, a live CD) can actually be built with 49only a single command. 50This command is aptly named 51.Dq Li "make release" . 52.Pp 53This document does not cover source code management, quality 54assurance, or other aspects of the release engineering process. 55.Sh TARGETS 56The release Makefile 57.Pq Pa src/nrelease/Makefile 58defines a number of targets which are roughly modeled after the 59targets used for building the system. 60.Bl -tag -width ".Cm realquickrel" 61.It Cm help 62Offer some help. 63.It Cm release 64Builds world and kernel, installs them, adds packages and prepares the ISO 65image. 66.It Cm quickrel 67Same as 68.Cm release 69but uses the 70.Cm quickworld 71target (alias 72.Cm quick ) . 73.It Cm realquickrel 74Same as 75.Cm release 76but uses the 77.Cm realquickworld 78target (alias 79.Cm realquick ) . 80.It Cm clean 81Removes the ISO root directory and object files. 82.It Cm realclean 83Same as 84.Cm clean 85but also removes external packages. 86.El 87.Pp 88The 89.Cm quickrel 90and 91.Cm realquickrel 92targets will only work if a full 93.Cm buildworld 94and 95.Cm buildkernel 96have been done before. 97For a description of the corresponding build targets, see 98.Xr build 7 . 99.Pp 100A number of additional targets may be specified along with 101.Cm release , 102.Cm quickrel , 103or 104.Cm realquickrel 105to add additional features: 106.Bl -tag -width ".Cm realquickrel" 107.It Cm gui 108Adds 109.Xr Xorg 1 110along with some additional applications to the ISO (LiveDVD). 111.It Cm nopkgs 112Do not add any packages (for debugging purposes). 113This is equivalent to setting 114.Va DPORTS_PACKAGES 115empty. 116.It Cm binpkgs 117Install binary packages using 118.Xr pkg 8 119instead of building them from 120.Xr dports 7 . 121.El 122.Pp 123During the process of rolling a release a check is performed to find 124out if external packages to be put on the CD exist on your system. 125If they cannot be found, the release process will stop and give 126proper commands for downloading and setting up these packages. 127.Sh ENVIRONMENT 128.Bl -tag -width ".Va DPORTS_EXTRA_PACKAGES" 129.It Va DPORTS_PACKAGES 130List of packages to be added to the ISO. 131.It Va DPORTS_EXTRA_PACKAGES 132List of packages, in addition to 133.Va DPORTS_PACKAGES , 134to be added to the ISO. 135.It Va DPORTS_PATH 136Location of the 137.Xr dports 7 138tree to be used for package building. 139.It Va GITURL_SRC 140The Git URL to the system source repository. 141.It Va GITURL_DPORTS 142The Git URL to the 143.Xr dports 7 144repository. 145.It Va IMGFILE 146The name of the image file (default is 147.Pa /usr/obj/release/dfly.img ) . 148.It Va IMGMNT 149The mount point for the image (default is 150.Pa /usr/obj/release/mnt ) . 151.It Va IMGSIZE 152The size of the IMG file (in units of 512-byte sector). 153The default size is determined from the actual content by leaving about 154600 MB free space. 155.It Va ISODIR 156Default prefix of 157.Va ISOFILE 158and 159.Va ISOROOT 160(default is 161.Pa /usr/obj/release ) . 162.It Va ISOFILE 163Name of the ISO image to generate (default is 164.Pa /usr/obj/release/dfly.iso ) . 165.It Va ISOROOT 166Location where the image contents are installed to before the ISO is prepared. 167.It Va KERNCONF 168Kernel configuration to use. 169.It Va LABEL 170The name of the 171.Xr disklabel64 5 172slice in the IMG file and is used to identify the installation USB device. 173The is also the volume ID of the ISO file. 174.It Va NREL_MAKE_JOBS 175The number of make jobs (default is the value of sysctl 176.Va hw.ncpu ) . 177.It Va PKG_ Ns Aq Ar port 178Specify the binary package name for port 179.Dq port . 180.It Va WITHOUT_SRCS 181If set, this variable will prevent source code from being copied to 182the ISO image. 183.El 184.Sh FILES 185.Bl -tag -compact -width ".Pa src/nrelease/Makefile" 186.It Pa /etc/make.conf 187.It Pa src/Makefile 188.It Pa src/Makefile.inc1 189.It Pa src/nrelease/Makefile 190.El 191.Sh EXAMPLES 192The following sequence of commands is used to build a standard 193.Dx 2.0 194installation CD image (assuming that a local git repository is 195available, see 196.Xr development 7 197for how to get this): 198.Bd -literal -offset indent 199cd /usr/src 200git checkout -b rel2_0 crater/DragonFly_RELEASE_2_0 201cd nrelease 202make release 203.Ed 204.Pp 205After running these commands, the image will be available in the 206.Pa /usr/obj/release 207directory. 208.\".Pp 209.\"The steps required for engineering a release are documented in (CVS) 210.\".Pa doc/notes/release.txt 211.\"(how to branch the CVS tree etc.) 212.\"They were put in an out of the way place so normal developers would not 213.\"accidentally try to run the commands in question. 214.Sh SEE ALSO 215.Xr git 1 , 216.Xr make 1 , 217.Xr make.conf 5 , 218.Xr build 7 , 219.Xr development 7 , 220.Xr dports 7 221.Sh HISTORY 222The 223.Nm 224framework was added in 225.Dx 1.0 226to implement the idea of a 227.Dq "live CD" . 228.Sh AUTHORS 229.An -nosplit 230The 231.Nm 232infrastructure was written by 233.An Matthew Dillon . 234This manual page was written by 235.An Sascha Wildner . 236