1# @(#)bsd.README 8.2 (Berkeley) 4/2/94 2# $FreeBSD: src/share/mk/bsd.README,v 1.25 2003/05/17 18:03:05 trhodes Exp $ 3 4This is the README file for the "include" files for the DragonFly 5source tree. The files are installed in /usr/share/mk, and are, by 6convention, named with the suffix ".mk". These files store several 7build options and should be handled with caution. 8 9Note, this file is not intended to replace reading through the .mk 10files for anything tricky. 11 12There are two main types of make include files. One type is the generally 13usable make include files, such as bsd.prog.mk and bsd.lib.mk. The other is 14the internal make include files, such as bsd.files.mk and bsd.man.mk, which 15can not/should not be used directly but are used by the other make include 16files. In most cases it is only interesting to include bsd.prog.mk or 17bsd.lib.mk. 18 19bsd.cpu.custom.mk - handle CPU flags for custom compilers 20bsd.cpu.gcc47.mk - handle GCC 4.7 specific CPU flags & variables 21bsd.cpu.gcc50.mk - handle GCC 5.0 specific CPU flags & variables 22bsd.cpu.mk - handle CPU flags & variables 23bsd.crunchgen.mk - building crunched binaries using crunchgen(1) 24bsd.dep.mk - handle Makefile dependencies 25bsd.doc.mk - building troff system documents 26bsd.files.mk - install of general purpose files 27bsd.hostlib.mk - 28bsd.hostprog.mk - 29bsd.incs.mk - install of include files 30bsd.init.mk - initialization for the make include files 31bsd.kmod.mk - building loadable kernel modules 32bsd.lib.mk - support for building libraries 33bsd.libnames.mk - define library names 34bsd.links.mk - install of links (sym/hard) 35bsd.man.mk - install of manual pages and their links 36bsd.nls.mk - build and install of NLS catalogs 37bsd.obj.mk - creating 'obj' directories and cleaning up 38bsd.own.mk - define common variables 39bsd.patch.mk - 40bsd.prog.mk - building programs from source files 41bsd.subdir.mk - targets for building subdirectories 42bsd.sys.mk - common settings used for building DragonFly sources 43sys.mk - default rules for all makes 44 45 46See also make(1), mkdep(1) and `PMake - A Tutorial', 47located in /usr/src/share/doc/psd/12.make. 48 49=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 50 51Random things worth knowing about this document: 52 53If appropriate when documenting the variables the default value is 54indicated using square brackets e.g. [gzip]. 55In some cases the default value depend on other values (e.g. system 56architecture). In these cases the most common value is indicated. 57 58This document contains some simple examples of the usage of the BSD make 59include files. For more examples look at the makefiles in the DragonFly 60source tree. 61 62=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 63 64RANDOM THINGS WORTH KNOWING: 65 66The files are like C-style #include files, and pretty much behave like 67you'd expect. The syntax is slightly different in that a single '.' is 68used instead of the hash mark, i.e. ".include <bsd.prog.mk>". 69 70One difference that will save you lots of debugging time is that inclusion 71of the file is normally done at the *end* of the Makefile. The reason for 72this is because .mk files often modify variables and behavior based on the 73values of variables set in the Makefile. To make this work, remember that 74the FIRST target found is the target that is used, i.e. if the Makefile has: 75 76 a: 77 echo a 78 a: 79 echo a number two 80 81the command "make a" will echo "a". To make things confusing, the SECOND 82variable assignment is the overriding one, i.e. if the Makefile has: 83 84 a= foo 85 a= bar 86 87 b: 88 echo ${a} 89 90the command "make b" will echo "bar". This is for compatibility with the 91way the V7 make behaved. 92 93It's fairly difficult to make the BSD .mk files work when you're building 94multiple programs in a single directory. It's a lot easier split up the 95programs than to deal with the problem. Most of the agony comes from making 96the "obj" directory stuff work right, not because we switch to a new version 97of make. So, don't get mad at us, figure out a better way to handle multiple 98architectures so we can quit using the symbolic link stuff. (Imake doesn't 99count.) 100 101The file .depend in the source directory is expected to contain dependencies 102for the source files. This file is read automatically by make after reading 103the Makefile. 104 105The variable DESTDIR works as before. It's not set anywhere but will change 106the tree where the file gets installed. 107 108The profiled libraries are no longer built in a different directory than 109the regular libraries. A new suffix, ".po", is used to denote a profiled 110object. 111 112=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 113 114The include file <sys.mk> has the default rules for all makes, in the BSD 115environment or otherwise. You probably don't want to touch this file. 116 117=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 118 119The include file <bsd.man.mk> handles installing manual pages and their 120links. 121 122It has three targets: 123 124 all-man: 125 build manual pages. 126 maninstall: 127 install the manual pages and their links. 128 manlint: 129 verify the validity of manual pages. 130 131It sets/uses the following variables: 132 133MANDIR Base path for manual installation. 134 135MANGRP Manual group. 136 137MANOWN Manual owner. 138 139MANMODE Manual mode. 140 141MANSUBDIR Subdirectory under the manual page section, i.e. "/vax" 142 or "/tahoe" for machine specific manual pages. 143 144MAN The manual pages to be installed (use a .1 - .9 suffix). 145 146MANINSTALLFLAGS Additional flags to pass to install(1). 147 148MLINKS List of manual page links (using a .1 - .9 suffix). The 149 linked-to file must come first, the linked file second, 150 and there may be multiple pairs. The files are soft-linked. 151 152The include file <bsd.man.mk> includes a file named "../Makefile.inc" if 153it exists. 154 155=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 156 157The include file <bsd.own.mk> contains the owners, groups, etc. for both 158manual pages and binaries. 159 160It has no targets. 161 162It sets/uses the following variables: 163 164BINGRP Binary group. 165 166BINOWN Binary owner. 167 168BINMODE Binary mode. 169 170STRIP The flag passed to the install program to cause the binary 171 to be stripped. This is to be used when building your 172 own install script so that the entire system can be made 173 stripped/not-stripped using a single knob. 174 175MANDIR Base path for manual installation. 176 177MANGRP Manual group. 178 179MANOWN Manual owner. 180 181MANMODE Manual mode. 182 183This file is generally useful when building your own Makefiles so that 184they use the same default owners etc. as the rest of the tree. 185 186=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 187 188The include file <bsd.prog.mk> handles building programs from one or 189more source files, along with their manual pages. It has a limited number 190of suffixes, consistent with the current needs of the BSD tree. 191 192It has seven targets: 193 194 all: 195 build the program and its manual page 196 clean: 197 remove the program and any object files. 198 cleandir: 199 remove all of the files removed by the target clean, as 200 well as .depend, tags, and any manual pages. 201 depend: 202 make the dependencies for the source files, and store 203 them in the file .depend. 204 install: 205 install the program and its manual pages; if the Makefile 206 does not itself define the target install, the targets 207 beforeinstall and afterinstall may also be used to cause 208 actions immediately before and after the install target 209 is executed. 210 lint: 211 run lint on the source files 212 tags: 213 create a tags file for the source files. 214 215It sets/uses the following variables: 216 217BINGRP Binary group. 218 219BINOWN Binary owner. 220 221BINMODE Binary mode. 222 223CLEANFILES Additional files to remove and 224CLEANDIRS additional directories to remove during clean and cleandir 225 targets. "rm -f" and "rm -rf" used respectively. 226 227COPTS Additional flags to the compiler when creating C objects. 228 229FILES A list of non-executable files. 230 The installation is controlled by the FILESNAME, FILESOWN, 231 FILESGRP, FILESMODE, FILESDIR variables that can be 232 further specialized by <VAR>_<file>. 233 234HIDEGAME If HIDEGAME is defined, the binary is installed in 235 /usr/games/hide, and a symbolic link is created to 236 /usr/games/dm. 237 238LDADD Additional loader objects. Usually used for libraries. 239 For example, to load with the compatibility and utility 240 libraries, use: 241 242 LDFILES=-lutil -lcompat 243 244LDFLAGS Additional loader flags. 245 246LINKS The list of binary links; should be full pathnames, the 247 linked-to file coming first, followed by the linked 248 file. The files are hard-linked. For example, to link 249 /bin/test and /bin/[, use: 250 251 LINKS= ${DESTDIR}/bin/test ${DESTDIR}/bin/[ 252 253MAN Manual pages (should end in .1 - .9). If no MAN variable 254 is defined, "MAN=${PROG}.1" is assumed. 255 256PROG The name of the program to build. If not supplied, nothing 257 is built. 258 259PROG_CXX If defined, the name of the program to build. Also 260 causes <bsd.prog.mk> to link the program with the 261 standard C++ library. PROG_CXX overrides the value 262 of PROG if PROG is also set. 263 264PROGNAME The name that the above program will be installed as, if 265 different from ${PROG}. 266 267SRCS List of source files to build the program. If SRCS is not 268 defined, it's assumed to be ${PROG}.c or, if PROG_CXX is 269 defined, ${PROG_CXX}.cc. 270 271DPADD Additional dependencies for the program. Usually used for 272 libraries. For example, to depend on the compatibility and 273 utility libraries use: 274 275 DPADD= ${LIBCOMPAT} ${LIBUTIL} 276 277 There is a predefined identifier for each (non-profiled, 278 non-shared) library and object. Library file names are 279 transformed to identifiers by removing the extension and 280 converting to upper case. 281 282 There are no special identifiers for profiled or shared 283 libraries or objects. The identifiers for the standard 284 libraries are used in DPADD. This works correctly iff all 285 the libraries are built at the same time. Unfortunately, 286 it causes unnecessary relinks to shared libraries when 287 only the static libraries have changed. Dependencies on 288 shared libraries should be only on the library version 289 numbers. 290 291STRIP The flag passed to the install program to cause the binary 292 to be stripped. This is to be used when building your 293 own install script so that the entire system can be made 294 stripped/not-stripped using a single knob. 295 296SUBDIR A list of subdirectories that should be built as well. 297 Each of the targets will execute the same target in the 298 subdirectories. 299 300SCRIPTS A list of interpreter scripts [file.{sh,csh,pl,awk,...}]. 301 The installation is controlled by the SCRIPTSNAME, SCRIPTSOWN, 302 SCRIPTSGRP, SCRIPTSMODE, SCRIPTSDIR variables that can be 303 further specialized by SCRIPTS<VAR>_<script>. 304 305The include file <bsd.prog.mk> includes the file named "../Makefile.inc" 306if it exists, as well as the include file <bsd.man.mk>. 307 308Some simple examples: 309 310To build foo from foo.c with a manual page foo.1, use: 311 312 PROG= foo 313 314 .include <bsd.prog.mk> 315 316To build foo from foo.c with a manual page foo.2, add the line: 317 318 MAN= foo.2 319 320If foo does not have a manual page at all, add the line: 321 322 NOMAN= noman 323 324If foo has multiple source files, add the line: 325 326 SRCS= a.c b.c c.c d.c 327 328=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 329 330The include file <bsd.subdir.mk> contains the default targets for building 331subdirectories. It has the same seven targets as <bsd.prog.mk>: all, clean, 332cleandir, depend, install, lint, and tags. For all of the directories 333listed in the variable SUBDIRS, the specified directory will be visited 334and the target made. There is also a default target which allows the 335command "make subdir" where subdir is any directory listed in the variable 336SUBDIRS. 337 338=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 339 340The include file <bsd.lib.mk> has support for building libraries. It has 341the same seven targets as <bsd.prog.mk>: all, clean, cleandir, depend, 342install, lint, and tags. It has a limited number of suffixes, consistent 343with the current needs of the BSD tree. 344 345It sets/uses the following variables: 346 347LIBDIR Target directory for libraries. 348 349LINTLIBDIR Target directory for lint libraries. 350 351LIBGRP Library group. 352 353LIBOWN Library owner. 354 355LIBMODE Library mode. 356 357LDADD Additional loader objects. 358 359MAN The manual pages to be installed (use a .1 - .9 suffix). 360 361SRCS List of source files to build the library. Suffix types 362 .s, .c, and .f are supported. Note, .s files are preferred 363 to .c files of the same name. (This is not the default for 364 versions of make.) 365 366The include file <bsd.lib.mk> includes the file named "../Makefile.inc" 367if it exists, as well as the include file <bsd.man.mk>. 368 369It has rules for building profiled objects; profiled libraries are 370built by default. 371 372Libraries are ranlib'd before installation. 373