xref: /dragonfly/stand/boot/pc32/libi386/biosdisk.c (revision 479ab7f0)

/*-
 * Copyright (c) 1998 Michael Smith <msmith@freebsd.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD: src/sys/boot/i386/libi386/biosdisk.c,v 1.45 2004/09/21 06:46:44 wes Exp $
 */

/*
 * BIOS disk device handling.
 *
 * Ideas and algorithms from:
 *
 * - NetBSD libi386/biosdisk.c
 * - FreeBSD biosboot/disk.c
 *
 */

#include <stand.h>

#include <sys/disklabel32.h>
#include <sys/disklabel64.h>
#include <sys/diskmbr.h>
#include <sys/dtype.h>
#include <machine/bootinfo.h>
#include <machine/psl.h>

#include <stdarg.h>

#include <bootstrap.h>
#include <btxv86.h>
#include "libi386.h"

#define BIOS_NUMDRIVES		0x475
#define BIOSDISK_SECSIZE	512
#define BUFSIZE			(4 * BIOSDISK_SECSIZE)
#define	MAXBDDEV		MAXDEV

#define DT_ATAPI		0x10		/* disk type for ATAPI floppies */
#define WDMAJOR			0		/* major numbers for devices we frontend for */
#define WFDMAJOR		1
#define FDMAJOR			2
#define DAMAJOR			4

#ifdef DISK_DEBUG
# define DEBUG(fmt, args...)	printf("%s: " fmt "\n" , __func__ , ## args)
#else
# define DEBUG(fmt, args...)
#endif

struct open_disk {
    int			od_dkunit;		/* disk unit number */
    int			od_unit;		/* BIOS unit number */
    int			od_cyl;			/* BIOS geometry */
    int			od_hds;
    int			od_sec;
    int			od_boff;		/* block offset from beginning of BIOS disk */
    int			od_flags;
#define BD_MODEINT13		0x0000
#define BD_MODEEDD1		0x0001
#define BD_MODEEDD3		0x0002
#define BD_MODEMASK		0x0003
#define BD_FLOPPY		0x0004
#define BD_LABELOK		0x0008
#define BD_PARTTABOK		0x0010
    union {
	struct disklabel32		od_disklabel;
	struct disklabel64		od_disklabel64;
    };
    int				od_nslices;	/* slice count */
    struct dos_partition	od_slicetab[NEXTDOSPART];
};

/*
 * List of BIOS devices, translation from disk unit number to
 * BIOS unit number.
 */
static struct bdinfo
{
    int		bd_unit;		/* BIOS unit number */
    int		bd_flags;
    int		bd_type;		/* BIOS 'drive type' (floppy only) */
} bdinfo [MAXBDDEV];
static int nbdinfo = 0;

static int	bd_getgeom(struct open_disk *od);
static int	bd_read(struct open_disk *od, daddr_t dblk, int blks,
		    caddr_t dest);
static int	bd_write(struct open_disk *od, daddr_t dblk, int blks,
		    caddr_t dest);

static int	bd_int13probe(struct bdinfo *bd);

static void	bd_printslice(struct open_disk *od, struct dos_partition *dp,
		    char *prefix, int verbose);
static void	bd_printbsdslice(struct open_disk *od, daddr_t offset,
		    char *prefix, int verbose);

static int	bd_init(void);
static int	bd_strategy(void *devdata, int flag, daddr_t dblk,
		    size_t size, char *buf, size_t *rsize);
static int	bd_realstrategy(void *devdata, int flag, daddr_t dblk,
		    size_t size, char *buf, size_t *rsize);
static int	bd_open(struct open_file *f, ...);
static int	bd_close(struct open_file *f);
static void	bd_print(int verbose);

struct devsw biosdisk = {
    "disk",
    DEVT_DISK,
    bd_init,
    bd_strategy,
    bd_open,
    bd_close,
    noioctl,
    bd_print,
    NULL
};

static int	bd_opendisk(struct open_disk **odp, struct i386_devdesc *dev);
static void	bd_closedisk(struct open_disk *od);
static int	bd_bestslice(struct open_disk *od);
static void	bd_chainextended(struct open_disk *od, u_int32_t base,
					u_int32_t offset);

/* also used by CD code */
char	__aligned(16) bounce_base[BOUNCEBUF_SIZE];


/*
 * Translate between BIOS device numbers and our private unit numbers.
 */
int
bd_bios2unit(int biosdev)
{
    int		i;

    DEBUG("looking for bios device 0x%x", biosdev);
    for (i = 0; i < nbdinfo; i++) {
	DEBUG("bd unit %d is BIOS device 0x%x", i, bdinfo[i].bd_unit);
	if (bdinfo[i].bd_unit == biosdev)
	    return(i);
    }
    return(-1);
}

int
bd_unit2bios(int unit)
{
    if ((unit >= 0) && (unit < nbdinfo))
	return(bdinfo[unit].bd_unit);
    return(-1);
}

/*
 * Quiz the BIOS for disk devices, save a little info about them.
 */
static int
bd_init(void)
{
    int	base, unit, nfd = 0;

    /* sequence 0, 0x80 */
    for (base = 0; base <= 0x80; base += 0x80) {
	for (unit = base; (nbdinfo < MAXBDDEV); unit++) {
	    /* check the BIOS equipment list for number of fixed disks */
	    if((base == 0x80) &&
	       (nfd >= *(unsigned char *)PTOV(BIOS_NUMDRIVES)))
	        break;

	    bdinfo[nbdinfo].bd_unit = unit;
	    bdinfo[nbdinfo].bd_flags = (unit < 0x80) ? BD_FLOPPY : 0;

	    if (!bd_int13probe(&bdinfo[nbdinfo]))
		break;

	    /* XXX we need "disk aliases" to make this simpler */
	    printf("BIOS drive %c: is disk%d\n",
		   (unit < 0x80) ? ('A' + unit) : ('C' + unit - 0x80), nbdinfo);
	    nbdinfo++;
	    if (base == 0x80)
	        nfd++;
	}
    }
    return(0);
}

/*
 * Try to detect a device supported by the legacy int13 BIOS
 */
static int
bd_int13probe(struct bdinfo *bd)
{
    v86.ctl = V86_FLAGS;
    v86.addr = 0x13;
    v86.eax = 0x800;
    v86.edx = bd->bd_unit;
    v86int();

    if (!(v86.efl & PSL_C) &&				/* carry clear */
	((v86.edx & 0xff) > ((unsigned)bd->bd_unit & 0x7f))) {	/* unit # OK */

	/*
	 * Ignore devices with an absurd sector size.
	 */
	if ((v86.ecx & 0x3f) == 0) {
		DEBUG("Invalid geometry for unit %d", bd->bd_unit);
		return(0);
	}
	bd->bd_flags |= BD_MODEINT13;
	bd->bd_type = v86.ebx & 0xff;

	/* Determine if we can use EDD with this device. */
	v86.ctl = V86_FLAGS;
	v86.addr = 0x13;
	v86.eax = 0x4100;
	v86.edx = bd->bd_unit;
	v86.ebx = 0x55aa;
	v86int();
	if (!(v86.efl & PSL_C) &&			/* carry clear */
	    ((v86.ebx & 0xffff) == 0xaa55) &&		/* signature */
	    (v86.ecx & 0x1)) {				/* packets mode ok */
	    bd->bd_flags |= BD_MODEEDD1;
	    if((v86.eax & 0xff00) > 0x300)
	        bd->bd_flags |= BD_MODEEDD3;
	}
	return(1);
    }
    return(0);
}

/*
 * Print information about disks
 */
static void
bd_print(int verbose)
{
    int				i, j;
    char			line[80];
    struct i386_devdesc		dev;
    struct open_disk		*od;
    struct dos_partition	*dptr;

    for (i = 0; i < nbdinfo; i++) {
	sprintf(line, "    disk%d:   BIOS drive %c:\n", i,
		(bdinfo[i].bd_unit < 0x80) ? ('A' + bdinfo[i].bd_unit) : ('C' + bdinfo[i].bd_unit - 0x80));
	pager_output(line);

	/* try to open the whole disk */
	dev.d_kind.biosdisk.unit = i;
	dev.d_kind.biosdisk.slice = -1;
	dev.d_kind.biosdisk.partition = -1;

	if (!bd_opendisk(&od, &dev)) {

	    /* Do we have a partition table? */
	    if (od->od_flags & BD_PARTTABOK) {
		dptr = &od->od_slicetab[0];

		/* Check for a "dedicated" disk */
		if ((dptr[3].dp_typ == DOSPTYP_386BSD ||
		     dptr[3].dp_typ == DOSPTYP_NETBSD ||
		     dptr[3].dp_typ == DOSPTYP_DFLYBSD) &&
		    (dptr[3].dp_start == 0) &&
		    (dptr[3].dp_size == 50000)) {
		    sprintf(line, "      disk%d", i);
		    bd_printbsdslice(od, 0, line, verbose);
		} else {
		    for (j = 0; j < od->od_nslices; j++) {
		        sprintf(line, "      disk%ds%d", i, j + 1);
			bd_printslice(od, &dptr[j], line, verbose);
                    }
                }
	    }
	    bd_closedisk(od);
	}
    }
}

/*
 * Print information about slices on a disk.  For the size calculations we
 * assume a 512 byte sector.
 */
static void
bd_printslice(struct open_disk *od, struct dos_partition *dp, char *prefix,
	int verbose)
{
	char line[80];

	switch (dp->dp_typ) {
	case DOSPTYP_DFLYBSD:
	case DOSPTYP_386BSD:
	case DOSPTYP_NETBSD:
	/* XXX: possibly add types 0 and 1, as in subr_disk, for gpt magic */
		bd_printbsdslice(od, (daddr_t)dp->dp_start, prefix, verbose);
		return;
	case DOSPTYP_LINSWP:
		if (verbose)
			sprintf(line, "%s: Linux swap %.6dMB (%d - %d)\n",
			    prefix, dp->dp_size / 2048,
			    dp->dp_start, dp->dp_start + dp->dp_size);
		else
			sprintf(line, "%s: Linux swap\n", prefix);
		break;
	case DOSPTYP_LINUX:
		/*
		 * XXX
		 * read the superblock to confirm this is an ext2fs partition?
		 */
		if (verbose)
			sprintf(line, "%s: ext2fs  %.6dMB (%d - %d)\n", prefix,
			    dp->dp_size / 2048, dp->dp_start,
			    dp->dp_start + dp->dp_size);
		else
			sprintf(line, "%s: ext2fs\n", prefix);
		break;
	case 0x00:				/* unused partition */
	case DOSPTYP_EXT:
		return;
	case 0x01:
		if (verbose)
			sprintf(line, "%s: FAT-12  %.6dMB (%d - %d)\n", prefix,
			    dp->dp_size / 2048, dp->dp_start,
			    dp->dp_start + dp->dp_size);
		else
			sprintf(line, "%s: FAT-12\n", prefix);
		break;
	case 0x04:
	case 0x06:
	case 0x0e:
		if (verbose)
			sprintf(line, "%s: FAT-16  %.6dMB (%d - %d)\n", prefix,
			    dp->dp_size / 2048, dp->dp_start,
			    dp->dp_start + dp->dp_size);
		else
			sprintf(line, "%s: FAT-16\n", prefix);
		break;
	case 0x0b:
	case 0x0c:
		if (verbose)
			sprintf(line, "%s: FAT-32  %.6dMB (%d - %d)\n", prefix,
			    dp->dp_size / 2048, dp->dp_start,
			    dp->dp_start + dp->dp_size);
		else
			sprintf(line, "%s: FAT-32\n", prefix);
		break;
	default:
		if (verbose)
			sprintf(line, "%s: Unknown fs: 0x%x  %.6dMB (%d - %d)\n",
			    prefix, dp->dp_typ, dp->dp_size / 2048,
			    dp->dp_start, dp->dp_start + dp->dp_size);
		else
			sprintf(line, "%s: Unknown fs: 0x%x\n", prefix,
			    dp->dp_typ);
	}
	pager_output(line);
}

static void
print_partition(u_int8_t fstype, unsigned long long offset,
		unsigned long long size, int i, int od_flags,
		char *prefix, int verbose, int type)
{
	char	line[80];

	/*
	 * For each partition, make sure we know what type of fs it is.  If
	 * not, then skip it.  However, since floppies often have bogus
	 * fstypes, print the 'a' partition on a floppy even if it is marked
	 * unused.
	 */
	if ((fstype == FS_SWAP) ||
	    (fstype == FS_VINUM) ||
	    (fstype == FS_HAMMER) ||
	    (fstype == FS_HAMMER2) ||
	    (fstype == FS_BSDFFS) ||
	    (fstype == FS_ZFS) ||
	    (fstype == FS_JFS2) ||
	    ((fstype == FS_UNUSED) &&
	     (od_flags & BD_FLOPPY) && (i == 0))) {

		/* Only print out statistics in verbose mode */
		if (verbose) {
			sprintf(line, "%c %s%c: %s  %.6lluMB (%llu - %llu)\n",
			    /* prefix disks that can be used to load modules with '*' */
			    ((fstype == FS_BSDFFS) || (fstype == FS_UNUSED) ||
			    (fstype == FS_VINUM)) ? '*' : ' ',
			    prefix, 'a' + i,
			    (fstype == FS_SWAP) ? "swap" :
			    (fstype == FS_VINUM) ? "vinum" :
			    (fstype == FS_HAMMER) ? "HAMMER" :
			    (fstype == FS_HAMMER2) ? "HAMMER2" :
			    (fstype == FS_JFS2) ? "JFS2" :
			    (fstype == FS_ZFS) ? "ZFS" :
			    (fstype == FS_BSDFFS) ? "FFS" :
			    "(unknown)",
			    (type==32)?(size / 2048):(size/1024/1024),
			    offset,
			    offset + size);
		} else {
			sprintf(line, "%c %s%c: %s\n",
			    /* prefix disks that can be used to load modules with '*' */
			    ((fstype == FS_BSDFFS) || (fstype == FS_UNUSED) ||
			    (fstype == FS_VINUM)) ? '*' : ' ',
			    prefix, 'a' + i,
			    (fstype == FS_SWAP) ? "swap" :
			    (fstype == FS_VINUM) ? "vinum" :
			    (fstype == FS_HAMMER) ? "HAMMER" :
			    (fstype == FS_HAMMER2) ? "HAMMER2" :
			    (fstype == FS_JFS2) ? "JFS2" :
			    (fstype == FS_ZFS) ? "ZFS" :
			    (fstype == FS_BSDFFS) ? "FFS" :
			    "(unknown)");
		}

		pager_output(line);
	}
}

/*
 * Print out each valid partition in the disklabel of a FreeBSD slice.
 * For size calculations, we assume a 512 byte sector size.
 */
static void
bd_printbsdslice(struct open_disk *od, daddr_t offset, char *prefix,
    int verbose)
{
	char		line[80];
	char		buf[BIOSDISK_SECSIZE*2];
	struct disklabel32	*lp = NULL;
	struct disklabel64	*lp64 = NULL;
	int			i;

	/* read disklabel */
	if (bd_read(od, offset + LABELSECTOR32, 1, buf))
		return;
	lp =(struct disklabel32 *)(&buf[0]);
	if (lp->d_magic != DISKMAGIC32) {
		if (bd_read(od, offset, 2, buf))
			return;

		lp64 =(struct disklabel64 *)(&buf[0]);
		if (lp64->d_magic != DISKMAGIC64) {
			sprintf(line, "%s: bad disklabel\n", prefix);
			pager_output(line);
			return;
		}
		lp = NULL; /* PARANOID */
	}
	if (lp64) {
		/* We got ourselves a disklabel64 here */
		for (i = 0; i < lp64->d_npartitions; i++) {
			if (lp64->d_partitions[i].p_bsize == 0)
				continue;

			print_partition(lp64->d_partitions[i].p_fstype,
					lp64->d_partitions[i].p_boffset,
					lp64->d_partitions[i].p_bsize,
					i, od->od_flags, prefix, verbose, 64);
		}
	} else if (lp) {
		/* Print partitions */
		for (i = 0; i < lp->d_npartitions; i++) {
			print_partition(lp->d_partitions[i].p_fstype,
					lp->d_partitions[i].p_offset,
					lp->d_partitions[i].p_size,
					i, od->od_flags, prefix, verbose, 32);
		}
	}
}


/*
 * Attempt to open the disk described by (dev) for use by (f).
 *
 * Note that the philosophy here is "give them exactly what
 * they ask for".  This is necessary because being too "smart"
 * about what the user might want leads to complications.
 * (eg. given no slice or partition value, with a disk that is
 *  sliced - are they after the first BSD slice, or the DOS
 *  slice before it?)
 */
static int
bd_open(struct open_file *f, ...)
{
    va_list			ap;
    struct i386_devdesc		*dev;
    struct open_disk		*od;
    int				error;

    va_start(ap, f);
    dev = va_arg(ap, struct i386_devdesc *);
    va_end(ap);
    if ((error = bd_opendisk(&od, dev)))
	return(error);

    /*
     * Save our context
     */
    ((struct i386_devdesc *)(f->f_devdata))->d_kind.biosdisk.data = od;
    DEBUG("open_disk %p, partition at 0x%x", od, od->od_boff);
    return(0);
}

static int
bd_opendisk(struct open_disk **odp, struct i386_devdesc *dev)
{
    struct dos_partition	*dptr;
    struct disklabel32		*lp;
    struct disklabel64		*lp64;
    struct open_disk		*od;
    int				sector, slice, i;
    int				error;
    static char			buf[BUFSIZE];

    if (dev->d_kind.biosdisk.unit >= nbdinfo) {
	DEBUG("attempt to open nonexistent disk");
	return(ENXIO);
    }

    od = (struct open_disk *)malloc(sizeof(struct open_disk));
    if (!od) {
	DEBUG("no memory");
	return (ENOMEM);
    }

    /* Look up BIOS unit number, intialise open_disk structure */
    od->od_dkunit = dev->d_kind.biosdisk.unit;
    od->od_unit = bdinfo[od->od_dkunit].bd_unit;
    od->od_flags = bdinfo[od->od_dkunit].bd_flags;
    od->od_boff = 0;
    od->od_nslices = 0;
    error = 0;
    DEBUG("open '%s', unit 0x%x slice %d partition %c",
	     i386_fmtdev(dev), dev->d_kind.biosdisk.unit,
	     dev->d_kind.biosdisk.slice, dev->d_kind.biosdisk.partition + 'a');

    /* Get geometry for this open (removable device may have changed) */
    if (bd_getgeom(od)) {
	DEBUG("can't get geometry");
	error = ENXIO;
	goto out;
    }

    /*
     * Following calculations attempt to determine the correct value
     * for d->od_boff by looking for the slice and partition specified,
     * or searching for reasonable defaults.
     */

    /*
     * Find the slice in the DOS slice table.
     */
    if (bd_read(od, 0, 1, buf)) {
	DEBUG("error reading MBR");
	error = EIO;
	goto out;
    }

    /*
     * Check the slice table magic.
     */
    if (((u_char)buf[0x1fe] != 0x55) || ((u_char)buf[0x1ff] != 0xaa)) {
	/* If a slice number was explicitly supplied, this is an error */
	if (dev->d_kind.biosdisk.slice > 0) {
	    DEBUG("no slice table/MBR (no magic)");
	    error = ENOENT;
	    goto out;
	}
	sector = 0;
	goto unsliced;		/* may be a floppy */
    }

    /*
     * copy the partition table, then pick up any extended partitions.  The
     * base partition table always has four entries, even if some of them
     * represented extended partitions.  However, any additional sub-extended
     * partitions will be silently recursed and not included in the slice
     * table.
     */
    bcopy(buf + DOSPARTOFF, &od->od_slicetab,
      sizeof(struct dos_partition) * NDOSPART);
    od->od_nslices = NDOSPART;

    dptr = &od->od_slicetab[0];
    for (i = 0; i < NDOSPART; i++, dptr++) {
	if ((dptr->dp_typ == DOSPTYP_EXT) || (dptr->dp_typ == DOSPTYP_EXTLBA))
	    bd_chainextended(od, dptr->dp_start, 0); /* 1st offset is zero */
    }
    od->od_flags |= BD_PARTTABOK;
    dptr = &od->od_slicetab[0];

    /*
     * Overflow entries are not loaded into memory but we still keep
     * track of the count.  Fix it up now.
     */
    if (od->od_nslices > NEXTDOSPART)
	od->od_nslices = NEXTDOSPART;

    /*
     * Is this a request for the whole disk?
     */
    if (dev->d_kind.biosdisk.slice == -1) {
	sector = 0;
	goto unsliced;
    }

    /*
     * if a slice number was supplied but not found, this is an error.
     */
    if (dev->d_kind.biosdisk.slice > 0) {
        slice = dev->d_kind.biosdisk.slice - 1;
        if (slice >= od->od_nslices) {
            DEBUG("slice %d not found", slice);
	    error = ENOENT;
	    goto out;
        }
    }

    /*
     * Check for the historically bogus MBR found on true dedicated disks
     */
    if ((dptr[3].dp_typ == DOSPTYP_386BSD ||
	 dptr[3].dp_typ == DOSPTYP_DFLYBSD) &&
      (dptr[3].dp_start == 0) &&
      (dptr[3].dp_size == 50000)) {
        sector = 0;
        goto unsliced;
    }

    /* Try to auto-detect the best slice; this should always give a slice number */
    if (dev->d_kind.biosdisk.slice == 0) {
	slice = bd_bestslice(od);
        if (slice == -1) {
	    error = ENOENT;
            goto out;
        }
        dev->d_kind.biosdisk.slice = slice;
    }

    dptr = &od->od_slicetab[0];
    /*
     * Accept the supplied slice number unequivocally (we may be looking
     * at a DOS partition).
     */
    dptr += (dev->d_kind.biosdisk.slice - 1);	/* we number 1-4, offsets are 0-3 */
    sector = dptr->dp_start;
    DEBUG("slice entry %d at %d, %d sectors", dev->d_kind.biosdisk.slice - 1, sector, dptr->dp_size);

    /*
     * If we are looking at a BSD slice, and the partition is < 0,
     * assume the 'a' partition
     */
    if ((dptr->dp_typ == DOSPTYP_386BSD ||
	 dptr->dp_typ == DOSPTYP_DFLYBSD) &&
        dev->d_kind.biosdisk.partition < 0) {
	dev->d_kind.biosdisk.partition = 0;
    }

unsliced:
    /*
     * Now we have the slice offset, look for the partition in the disklabel if we have
     * a partition to start with.
     *
     * XXX we might want to check the label checksum.
     */
    if (dev->d_kind.biosdisk.partition < 0) {
	od->od_boff = sector;		/* no partition, must be after the slice */
	DEBUG("opening raw slice");
    } else {

	if (bd_read(od, sector + LABELSECTOR32, 1, buf)) {
	    DEBUG("error reading disklabel");
	    error = EIO;
	    goto out;
	}
	DEBUG("copy %d bytes of label from %p to %p", sizeof(struct disklabel32), buf + LABELOFFSET32, &od->od_disklabel);
	bcopy(buf + LABELOFFSET32, &od->od_disklabel, sizeof(struct disklabel32));
	lp = &od->od_disklabel;

	if (lp->d_magic == DISKMAGIC32) {
	    od->od_flags |= BD_LABELOK;

	    if (dev->d_kind.biosdisk.partition >= lp->d_npartitions) {
		DEBUG("partition '%c' exceeds partitions in table (a-'%c')",
		      'a' + dev->d_kind.biosdisk.partition, 'a' + lp->d_npartitions);
		error = EPART;
		goto out;

	    }

#ifdef DISK_DEBUG
	    /* Complain if the partition is unused unless this is a floppy. */
	    if ((lp->d_partitions[dev->d_kind.biosdisk.partition].p_fstype == FS_UNUSED) &&
		!(od->od_flags & BD_FLOPPY))
		DEBUG("warning, partition marked as unused");
#endif

	    od->od_boff =
		    lp->d_partitions[dev->d_kind.biosdisk.partition].p_offset -
		    lp->d_partitions[RAW_PART].p_offset +
		    sector;

	    goto out;
	}

	/* else maybe DISKLABEL64? */

	if (bd_read(od, sector, (sizeof(od->od_disklabel64) + 511) / 512, buf)) {
	    DEBUG("error reading disklabel");
	    error = EIO;
	    goto out;
	}
	DEBUG("copy %d bytes of label from %p to %p", sizeof(od->od_disklabel64), buf, &od->od_disklabel64);
	bcopy(buf, &od->od_disklabel64, sizeof(od->od_disklabel64));
	lp64 = &od->od_disklabel64;

	if (lp64->d_magic == DISKMAGIC64) {
	    od->od_flags |= BD_LABELOK;

	    if (dev->d_kind.biosdisk.partition >= lp64->d_npartitions ||
		lp64->d_partitions[dev->d_kind.biosdisk.partition].p_bsize == 0) {
		DEBUG("partition '%c' exceeds partitions in table (a-'%c')",
		      'a' + dev->d_kind.biosdisk.partition, 'a' + lp64->d_npartitions);
		error = EPART;
		goto out;

	    }

	    od->od_boff =
		    lp64->d_partitions[dev->d_kind.biosdisk.partition].p_boffset / 512 +
		    sector;

	    DEBUG("disklabel64 slice at %d", od->od_boff);

	} else {
	    DEBUG("no disklabel");
	    error = ENOENT;
	}
    }

 out:
    if (error) {
	free(od);
    } else {
	*odp = od;	/* return the open disk */
    }
    return(error);
}


static void
bd_chainextended(struct open_disk *od, u_int32_t base, u_int32_t offset)
{
        char   buf[BIOSDISK_SECSIZE];
        struct dos_partition *dp1, *dp2;
	int i;

	if (bd_read(od, (daddr_t)(base + offset), 1, buf)) {
                printf("\nerror reading extended partition table");
		return;
	}

	/*
	 * dp1 points to the first record in the on-disk XPT,
	 * dp2 points to the next entry in the in-memory parition table.
	 *
	 * NOTE: dp2 may be out of bounds if od_nslices >= NEXTDOSPART.
	 *
	 * NOTE: unlike the extended partitions in our primary dos partition
	 * table, we do not record recursed extended partitions themselves
	 * in our in-memory partition table.
	 *
	 * NOTE: recording within our in-memory table must be breadth first
	 * ot match what the kernel does.  Thus, two passes are required.
	 *
	 * NOTE: partitioning programs which support extended partitions seem
	 * to always use the first entry for the user partition and the
	 * second entry to chain, and also appear to disallow more then one
	 * extended partition at each level.  Nevertheless we make our code
	 * somewhat more generic (and the same as the kernel's own slice
	 * scan).
	 */
	dp1 = (struct dos_partition *)(&buf[DOSPARTOFF]);
	dp2 = &od->od_slicetab[od->od_nslices];

	for (i = 0; i < NDOSPART; ++i, ++dp1) {
		if (dp1->dp_scyl == 0 && dp1->dp_shd == 0 &&
		    dp1->dp_ssect == 0 && dp1->dp_start == 0 &&
		    dp1->dp_size == 0) {
			continue;
		}
		if ((dp1->dp_typ == DOSPTYP_EXT) ||
		    (dp1->dp_typ == DOSPTYP_EXTLBA)) {
			/*
			 * breadth first traversal, must skip in the
			 * first pass
			 */
			continue;
		}

		/*
		 * Only load up the in-memory data if we haven't overflowed
		 * our in-memory array.
		 */
		if (od->od_nslices < NEXTDOSPART) {
			dp2->dp_typ = dp1->dp_typ;
			dp2->dp_start = base + offset + dp1->dp_start;
			dp2->dp_size = dp1->dp_size;
		}
		++od->od_nslices;
		++dp2;
	}

	/*
	 * Pass 2 - handle extended partitions.  Note that the extended
	 * slice itself is not stored in the slice array when we recurse,
	 * but any 'original' top-level extended slices are.  This is to
	 * match what the kernel does.
	 */
	dp1 -= NDOSPART;
	for (i = 0; i < NDOSPART; ++i, ++dp1) {
		if (dp1->dp_scyl == 0 && dp1->dp_shd == 0 &&
		    dp1->dp_ssect == 0 && dp1->dp_start == 0 &&
		    dp1->dp_size == 0) {
			continue;
		}
		if ((dp1->dp_typ == DOSPTYP_EXT) ||
		    (dp1->dp_typ == DOSPTYP_EXTLBA))
			bd_chainextended(od, base, dp1->dp_start);
	}
}

/*
 * Search for a slice with the following preferences:
 *
 * 1: Active FreeBSD slice
 * 2: Non-active FreeBSD slice
 * 3: Active Linux slice
 * 4: non-active Linux slice
 * 5: Active FAT/FAT32 slice
 * 6: non-active FAT/FAT32 slice
 */
#define PREF_RAWDISK	0
#define PREF_FBSD_ACT	1
#define PREF_FBSD	2
#define PREF_LINUX_ACT	3
#define PREF_LINUX	4
#define PREF_DOS_ACT	5
#define PREF_DOS	6
#define PREF_NONE	7

/*
 * slicelimit is in the range 0 .. NDOSPART
 */
static int
bd_bestslice(struct open_disk *od)
{
	struct dos_partition *dp;
	int pref, preflevel;
	int i, prefslice;

	prefslice = 0;
	preflevel = PREF_NONE;

	dp = &od->od_slicetab[0];
	for (i = 0; i < od->od_nslices; i++, dp++) {
		switch (dp->dp_typ) {
		case DOSPTYP_DFLYBSD:		/* DragonFlyBSD */
		case DOSPTYP_386BSD:		/* FreeBSD and old DFlyBSD */
			pref = dp->dp_flag & 0x80 ? PREF_FBSD_ACT : PREF_FBSD;
			break;

		case DOSPTYP_LINUX:
			pref = dp->dp_flag & 0x80 ? PREF_LINUX_ACT : PREF_LINUX;
			break;

		case 0x01:		/* DOS/Windows */
		case 0x04:
		case 0x06:
		case 0x0b:
		case 0x0c:
		case 0x0e:
			pref = dp->dp_flag & 0x80 ? PREF_DOS_ACT : PREF_DOS;
			break;

		default:
		        pref = PREF_NONE;
		}
		if (pref < preflevel) {
			preflevel = pref;
			prefslice = i + 1;
		}
	}
	return (prefslice);
}

static int
bd_close(struct open_file *f)
{
    struct open_disk	*od = (struct open_disk *)(((struct i386_devdesc *)(f->f_devdata))->d_kind.biosdisk.data);

    bd_closedisk(od);
    return(0);
}

static void
bd_closedisk(struct open_disk *od)
{
    DEBUG("open_disk %p", od);
#if 0
    /* XXX is this required? (especially if disk already open...) */
    if (od->od_flags & BD_FLOPPY)
	delay(3000000);
#endif
    free(od);
}

static int
bd_strategy(void *devdata, int rw, daddr_t dblk, size_t size, char *buf, size_t *rsize)
{
    struct bcache_devdata	bcd;
    struct open_disk	*od = (struct open_disk *)(((struct i386_devdesc *)devdata)->d_kind.biosdisk.data);

    bcd.dv_strategy = bd_realstrategy;
    bcd.dv_devdata = devdata;
    return(bcache_strategy(&bcd, od->od_unit, rw, dblk+od->od_boff, size, buf, rsize));
}

static int
bd_realstrategy(void *devdata, int rw, daddr_t dblk, size_t size, char *buf, size_t *rsize)
{
    struct open_disk	*od = (struct open_disk *)(((struct i386_devdesc *)devdata)->d_kind.biosdisk.data);
    int			blks;
#ifdef BD_SUPPORT_FRAGS
    char		fragbuf[BIOSDISK_SECSIZE];
    size_t		fragsize;

    fragsize = size % BIOSDISK_SECSIZE;
#else
    if (size % BIOSDISK_SECSIZE)
	panic("bd_strategy: %d bytes I/O not multiple of block size", size);
#endif

    DEBUG("open_disk %p", od);

    switch(rw){
    case F_READ:
	blks = size / BIOSDISK_SECSIZE;
	DEBUG("read %d from %d to %p", blks, dblk, buf);

	if (rsize)
	    *rsize = 0;
	if (blks && bd_read(od, dblk, blks, buf)) {
	    DEBUG("read error");
	    return (EIO);
	}
#ifdef BD_SUPPORT_FRAGS
	DEBUG("bd_strategy: frag read %d from %d+%d to %p",
	     fragsize, dblk, blks, buf + (blks * BIOSDISK_SECSIZE));
	if (fragsize && bd_read(od, dblk + blks, 1, fragsize)) {
	    DEBUG("frag read error");
	    return(EIO);
	}
	bcopy(fragbuf, buf + (blks * BIOSDISK_SECSIZE), fragsize);
#endif
	if (rsize)
	    *rsize = size;
	return (0);
    case F_WRITE :
	blks = size / BIOSDISK_SECSIZE;
	DEBUG("write %d from %d to %p", blks, dblk, buf);

	if (rsize)
	    *rsize = 0;
	if (blks && bd_write(od, dblk, blks, buf)) {
	    DEBUG("write error");
	    return (EIO);
	}
#ifdef BD_SUPPORT_FRAGS
	if(fragsize) {
	    DEBUG("Attempted to write a frag");
	    return (EIO);
	}
#endif
	if (rsize)
	    *rsize = size;
	return (0);
    default:
	break; /* DO NOTHING */
    }
    return EROFS;
}

static int
bd_read(struct open_disk *od, daddr_t dblk, int blks, caddr_t dest)
{
    u_int	x, bpc, cyl, hd, sec, result, resid, retry, maxfer;
    caddr_t	p, xp, bbuf, breg;

    /* Just in case some idiot actually tries to read -1 blocks... */
    if (blks < 0)
	return (-1);

    bpc = (od->od_sec * od->od_hds);		/* blocks per cylinder */
    resid = blks;
    p = dest;

    /*
     * Always bounce.  Our buffer is probably not segment-addressable.
     */
    if (1) {
	/*
	 * There is a 64k physical boundary somewhere in the destination
	 * buffer, so we have to arrange a suitable bounce buffer.  Allocate
	 * a buffer twice as large as we need to.  Use the bottom half unless
	 * there is a break there, in which case we use the top half.
	 */
	bbuf = bounce_base;
	x = min(BOUNCEBUF_SECTS / 2, (unsigned)blks);

	if (((u_int32_t)VTOP(bbuf) & 0xffff8000) ==
	    ((u_int32_t)VTOP(bbuf + x * BIOSDISK_SECSIZE - 1) & 0xffff8000)) {
	    breg = bbuf;
	} else {
	    breg = bbuf + x * BIOSDISK_SECSIZE;
	}
	maxfer = x;		/* limit transfers to bounce region size */
    } else {
	breg = bbuf = NULL;
	maxfer = 0;
    }

    while (resid > 0) {
	x = dblk;
	cyl = x / bpc;			/* block # / blocks per cylinder */
	x %= bpc;			/* block offset into cylinder */
	hd = x / od->od_sec;		/* offset / blocks per track */
	sec = x % od->od_sec;		/* offset into track */

	/* play it safe and don't cross track boundaries (XXX this is probably unnecessary) */
	x = szmin(od->od_sec - sec, resid);
	if (maxfer > 0)
	    x = min(x, maxfer);		/* fit bounce buffer */

	/* where do we transfer to? */
	xp = (bbuf == NULL ? p : breg);

	/* correct sector number for 1-based BIOS numbering */
	sec++;

	/*
	 * Loop retrying the operation a couple of times.  The BIOS may also
	 * retry.
	 */
	for (retry = 0; retry < 3; retry++) {
	    /*
	     * If retrying, reset the drive.
	     */
	    if (retry > 0) {
		v86.ctl = V86_FLAGS;
		v86.addr = 0x13;
		v86.eax = 0;
		v86.edx = od->od_unit;
		v86int();
	    }

	    /*
	     * Always use EDD if the disk supports it, otherwise fall back
	     * to CHS mode (returning an error if the cylinder number is
	     * too large).
	     */
	    if (od->od_flags & BD_MODEEDD1) {
		static unsigned short packet[8];

		packet[0] = 0x10;
		packet[1] = x;
		packet[2] = VTOPOFF(xp);
		packet[3] = VTOPSEG(xp);
		packet[4] = dblk & 0xffff;
		packet[5] = dblk >> 16;
		packet[6] = 0;
		packet[7] = 0;
		v86.ctl = V86_FLAGS;
		v86.addr = 0x13;
		v86.eax = 0x4200;
		v86.edx = od->od_unit;
		v86.ds = VTOPSEG(packet);
		v86.esi = VTOPOFF(packet);
		v86int();
		result = (v86.efl & PSL_C);
		if (result == 0)
		    break;
	    } else if (cyl < 1024) {
	        /* Use normal CHS addressing */
	        v86.ctl = V86_FLAGS;
		v86.addr = 0x13;
		v86.eax = 0x200 | x;
		v86.ecx = ((cyl & 0xff) << 8) | ((cyl & 0x300) >> 2) | sec;
		v86.edx = (hd << 8) | od->od_unit;
		v86.es = VTOPSEG(xp);
		v86.ebx = VTOPOFF(xp);
		v86int();
		result = (v86.efl & PSL_C);
		if (result == 0)
		    break;
	    } else {
		result = 1;
		break;
	    }
	}

	DEBUG("%u sectors from %u/%u/%d to %p (0x%x) %s",
	      x, cyl, hd, sec - 1, p, VTOP(p), result ? "failed" : "ok");
	/* BUG here, cannot use v86 in printf because putchar uses it too */
	DEBUG("ax = 0x%04x cx = 0x%04x dx = 0x%04x status 0x%x",
	      0x200 | x,
	      ((cyl & 0xff) << 8) | ((cyl & 0x300) >> 2) | sec,
	      (hd << 8) | od->od_unit,
	      (v86.eax >> 8) & 0xff);
	if (result)
	    return(-1);
	if (bbuf != NULL)
	    bcopy(breg, p, x * BIOSDISK_SECSIZE);
	p += (x * BIOSDISK_SECSIZE);
	dblk += x;
	resid -= x;
    }

/*    hexdump(dest, (blks * BIOSDISK_SECSIZE)); */
    return(0);
}


static int
bd_write(struct open_disk *od, daddr_t dblk, int blks, caddr_t dest)
{
    u_int	x, bpc, cyl, hd, sec, result, resid, retry, maxfer;
    caddr_t	p, xp, bbuf, breg;

    /* Just in case some idiot actually tries to read -1 blocks... */
    if (blks < 0)
	return (-1);

    bpc = (od->od_sec * od->od_hds);		/* blocks per cylinder */
    resid = blks;
    p = dest;

    /*
     * Always bounce.  Our buffer is probably not segment-addressable.
     */
    if (1) {
	/*
	 * There is a 64k physical boundary somewhere in the destination
	 * buffer, so we have to arrange a suitable bounce buffer.  Allocate
	 * a buffer twice as large as we need to.  Use the bottom half
	 * unless there is a break there, in which case we use the top half.
	 */
	bbuf = bounce_base;
	x = min(BOUNCEBUF_SECTS / 2, (unsigned)blks);

	if (((u_int32_t)VTOP(bbuf) & 0xffff8000) ==
	    ((u_int32_t)VTOP(bbuf + x * BIOSDISK_SECSIZE - 1) & 0xffff8000)) {
	    breg = bbuf;
	} else {
	    breg = bbuf + x * BIOSDISK_SECSIZE;
	}
	maxfer = x;		/* limit transfers to bounce region size */
    } else {
	breg = bbuf = NULL;
	maxfer = 0;
    }

    while (resid > 0) {
	x = dblk;
	cyl = x / bpc;			/* block # / blocks per cylinder */
	x %= bpc;			/* block offset into cylinder */
	hd = x / od->od_sec;		/* offset / blocks per track */
	sec = x % od->od_sec;		/* offset into track */

	/* play it safe and don't cross track boundaries (XXX this is probably unnecessary) */
	x = szmin(od->od_sec - sec, resid);
	if (maxfer > 0)
	    x = szmin(x, maxfer);		/* fit bounce buffer */

	/* where do we transfer to? */
	xp = (bbuf == NULL ? p : breg);

	/* correct sector number for 1-based BIOS numbering */
	sec++;


	/* Put your Data In, Put your Data out,
	   Put your Data In, and shake it all about
	*/
	if (bbuf != NULL)
	    bcopy(p, breg, x * BIOSDISK_SECSIZE);
	p += (x * BIOSDISK_SECSIZE);
	dblk += x;
	resid -= x;

	/*
	 * Loop retrying the operation a couple of times.  The BIOS may also
	 * retry.
	 */
	for (retry = 0; retry < 3; retry++) {
	    /*
	     * If retrying, reset the drive.
	     */
	    if (retry > 0) {
		v86.ctl = V86_FLAGS;
		v86.addr = 0x13;
		v86.eax = 0;
		v86.edx = od->od_unit;
		v86int();
	    }

	    /*
	     * Always use EDD if the disk supports it, otherwise fall back
	     * to CHS mode (returning an error if the cylinder number is
	     * too large).
	     */
	    if (od->od_flags & BD_MODEEDD1) {
		static unsigned short packet[8];

		packet[0] = 0x10;
		packet[1] = x;
		packet[2] = VTOPOFF(xp);
		packet[3] = VTOPSEG(xp);
		packet[4] = dblk & 0xffff;
		packet[5] = dblk >> 16;
		packet[6] = 0;
		packet[7] = 0;
		v86.ctl = V86_FLAGS;
		v86.addr = 0x13;
		    /* Should we Write with verify ?? 0x4302 ? */
		v86.eax = 0x4300;
		v86.edx = od->od_unit;
		v86.ds = VTOPSEG(packet);
		v86.esi = VTOPOFF(packet);
		v86int();
		result = (v86.efl & PSL_C);
		if (result == 0)
		    break;
	    } else if (cyl < 1024) {
	        /* Use normal CHS addressing */
	        v86.ctl = V86_FLAGS;
		v86.addr = 0x13;
		v86.eax = 0x300 | x;
		v86.ecx = ((cyl & 0xff) << 8) | ((cyl & 0x300) >> 2) | sec;
		v86.edx = (hd << 8) | od->od_unit;
		v86.es = VTOPSEG(xp);
		v86.ebx = VTOPOFF(xp);
		v86int();
		result = (v86.efl & PSL_C);
		if (result == 0)
		    break;
	    } else {
		result = 1;
		break;
	    }
	}

 	DEBUG("%u sectors from %u/%u/%d to %p (0x%x) %s", x, cyl, hd, sec - 1, p, VTOP(p), result ? "failed" : "ok");
	/* BUG here, cannot use v86 in printf because putchar uses it too */
	DEBUG("ax = 0x%04x cx = 0x%04x dx = 0x%04x status 0x%x",
	      0x200 | x, ((cyl & 0xff) << 8) | ((cyl & 0x300) >> 2) | sec, (hd << 8) | od->od_unit, (v86.eax >> 8) & 0xff);
	if (result)
	    return(-1);
    }

    /* hexdump(dest, (blks * BIOSDISK_SECSIZE)); */
    return(0);
}
static int
bd_getgeom(struct open_disk *od)
{

    v86.ctl = V86_FLAGS;
    v86.addr = 0x13;
    v86.eax = 0x800;
    v86.edx = od->od_unit;
    v86int();

    if ((v86.efl & PSL_C) ||				/* carry set */
	((v86.edx & 0xff) <= (unsigned)(od->od_unit & 0x7f)))	/* unit # bad */
	return(1);

    /* convert max cyl # -> # of cylinders */
    od->od_cyl = ((v86.ecx & 0xc0) << 2) + ((v86.ecx & 0xff00) >> 8) + 1;
    /* convert max head # -> # of heads */
    od->od_hds = ((v86.edx & 0xff00) >> 8) + 1;
    od->od_sec = v86.ecx & 0x3f;

    DEBUG("unit 0x%x geometry %d/%d/%d", od->od_unit, od->od_cyl, od->od_hds, od->od_sec);
    return(0);
}

/*
 * Return the BIOS geometry of a given "fixed drive" in a format
 * suitable for the legacy bootinfo structure.  Since the kernel is
 * expecting raw int 0x13/0x8 values for N_BIOS_GEOM drives, we
 * prefer to get the information directly, rather than rely on being
 * able to put it together from information already maintained for
 * different purposes and for a probably different number of drives.
 *
 * For valid drives, the geometry is expected in the format (31..0)
 * "000000cc cccccccc hhhhhhhh 00ssssss"; and invalid drives are
 * indicated by returning the geometry of a "1.2M" PC-format floppy
 * disk.  And, incidentally, what is returned is not the geometry as
 * such but the highest valid cylinder, head, and sector numbers.
 */
u_int32_t
bd_getbigeom(int bunit)
{

    v86.ctl = V86_FLAGS;
    v86.addr = 0x13;
    v86.eax = 0x800;
    v86.edx = 0x80 + bunit;
    v86int();
    if (v86.efl & PSL_C)
	return 0x4f010f;
    return ((v86.ecx & 0xc0) << 18) | ((v86.ecx & 0xff00) << 8) |
	   (v86.edx & 0xff00) | (v86.ecx & 0x3f);
}

/*
 * Return a suitable cdev_t value for (dev).
 *
 * In the case where it looks like (dev) is a SCSI disk, we allow the number of
 * IDE disks to be specified in $num_ide_disks.  There should be a Better Way.
 */
int
bd_getdev(struct i386_devdesc *dev)
{
    struct open_disk		*od;
    int				biosdev;
    int 			major;
    int				rootdev;
    char			*nip, *cp;
    int				unitofs = 0, i, unit;

    biosdev = bd_unit2bios(dev->d_kind.biosdisk.unit);
    DEBUG("unit %d BIOS device %d", dev->d_kind.biosdisk.unit, biosdev);
    if (biosdev == -1)				/* not a BIOS device */
	return(-1);
    if (bd_opendisk(&od, dev) != 0)		/* oops, not a viable device */
	return(-1);

    if (biosdev < 0x80) {
	/* floppy (or emulated floppy) or ATAPI device */
	if (bdinfo[dev->d_kind.biosdisk.unit].bd_type == DT_ATAPI) {
	    /* is an ATAPI disk */
	    major = WFDMAJOR;
	} else {
	    /* is a floppy disk */
	    major = FDMAJOR;
	}
    } else {
	/* harddisk */
	if ((od->od_flags & BD_LABELOK) && (od->od_disklabel.d_type == DTYPE_SCSI)) {
	    /* label OK, disk labelled as SCSI */
	    major = DAMAJOR;
	    /* check for unit number correction hint, now deprecated */
	    if ((nip = getenv("num_ide_disks")) != NULL) {
		i = strtol(nip, &cp, 0);
		/* check for parse error */
		if ((cp != nip) && (*cp == 0))
		    unitofs = i;
	    }
	} else {
	    /* assume an IDE disk */
	    major = WDMAJOR;
	}
    }
    /* default root disk unit number */
    unit = (biosdev & 0x7f) - unitofs;

    /* XXX a better kludge to set the root disk unit number */
    if ((nip = getenv("root_disk_unit")) != NULL) {
	i = strtol(nip, &cp, 0);
	/* check for parse error */
	if ((cp != nip) && (*cp == 0))
	    unit = i;
    }

    rootdev = MAKEBOOTDEV(major, dev->d_kind.biosdisk.slice + 1, unit,
			  dev->d_kind.biosdisk.partition);
    DEBUG("dev is 0x%x\n", rootdev);
    return(rootdev);
}