1 /* 2 * Data structures and definitions for CAM Control Blocks (CCBs). 3 * 4 * Copyright (c) 1997, 1998 Justin T. Gibbs. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions, and the following disclaimer, 12 * without modification, immediately at the beginning of the file. 13 * 2. The name of the author may not be used to endorse or promote products 14 * derived from this software without specific prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR 20 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 * $FreeBSD: src/sys/cam/cam_ccb.h,v 1.15.2.3 2003/07/29 04:00:34 njl Exp $ 29 * $DragonFly: src/sys/bus/cam/cam_ccb.h,v 1.12 2007/11/21 20:07:31 pavalos Exp $ 30 */ 31 32 #ifndef _CAM_CAM_CCB_H 33 #define _CAM_CAM_CCB_H 1 34 35 #include <sys/queue.h> 36 #include <sys/cdefs.h> 37 #include <sys/time.h> 38 #ifdef CAM_NEW_TRAN_CODE 39 #include <machine/limits.h> 40 #endif 41 #include <sys/callout.h> 42 #include "cam_debug.h" 43 #include "scsi/scsi_all.h" 44 45 46 /* General allocation length definitions for CCB structures */ 47 #define IOCDBLEN CAM_MAX_CDBLEN /* Space for CDB bytes/pointer */ 48 #define VUHBALEN 14 /* Vendor Unique HBA length */ 49 #define SIM_IDLEN 16 /* ASCII string len for SIM ID */ 50 #define HBA_IDLEN 16 /* ASCII string len for HBA ID */ 51 #define DEV_IDLEN 16 /* ASCII string len for device names */ 52 #define CCB_PERIPH_PRIV_SIZE 2 /* size of peripheral private area */ 53 #define CCB_SIM_PRIV_SIZE 2 /* size of sim private area */ 54 55 /* Struct definitions for CAM control blocks */ 56 57 /* Common CCB header */ 58 /* CAM CCB flags */ 59 typedef enum { 60 CAM_CDB_POINTER = 0x00000001,/* The CDB field is a pointer */ 61 CAM_QUEUE_ENABLE = 0x00000002,/* SIM queue actions are enabled */ 62 CAM_CDB_LINKED = 0x00000004,/* CCB contains a linked CDB */ 63 CAM_NEGOTIATE = 0x00000008,/* 64 * Perform transport negotiation 65 * with this command. 66 */ 67 CAM_SCATTER_VALID = 0x00000010,/* Scatter/gather list is valid */ 68 CAM_DIS_AUTOSENSE = 0x00000020,/* Disable autosense feature */ 69 CAM_DIR_RESV = 0x00000000,/* Data direction (00:reserved) */ 70 CAM_DIR_IN = 0x00000040,/* Data direction (01:DATA IN) */ 71 CAM_DIR_OUT = 0x00000080,/* Data direction (10:DATA OUT) */ 72 CAM_DIR_NONE = 0x000000C0,/* Data direction (11:no data) */ 73 CAM_DIR_MASK = 0x000000C0,/* Data direction Mask */ 74 CAM_SOFT_RST_OP = 0x00000100,/* Use Soft reset alternative */ 75 CAM_ENG_SYNC = 0x00000200,/* Flush resid bytes on complete */ 76 CAM_DEV_QFRZDIS = 0x00000400,/* Disable DEV Q freezing */ 77 CAM_DEV_QFREEZE = 0x00000800,/* Freeze DEV Q on execution */ 78 CAM_HIGH_POWER = 0x00001000,/* Command takes a lot of power */ 79 CAM_SENSE_PTR = 0x00002000,/* Sense data is a pointer */ 80 CAM_SENSE_PHYS = 0x00004000,/* Sense pointer is physical addr*/ 81 CAM_TAG_ACTION_VALID = 0x00008000,/* Use the tag action in this ccb*/ 82 CAM_PASS_ERR_RECOVER = 0x00010000,/* Pass driver does err. recovery*/ 83 CAM_DIS_DISCONNECT = 0x00020000,/* Disable disconnect */ 84 CAM_SG_LIST_PHYS = 0x00040000,/* SG list has physical addrs. */ 85 CAM_MSG_BUF_PHYS = 0x00080000,/* Message buffer ptr is physical*/ 86 CAM_SNS_BUF_PHYS = 0x00100000,/* Autosense data ptr is physical*/ 87 CAM_DATA_PHYS = 0x00200000,/* SG/Buffer data ptrs are phys. */ 88 CAM_CDB_PHYS = 0x00400000,/* CDB poiner is physical */ 89 CAM_ENG_SGLIST = 0x00800000,/* SG list is for the HBA engine */ 90 91 /* Phase cognizant mode flags */ 92 CAM_DIS_AUTOSRP = 0x01000000,/* Disable autosave/restore ptrs */ 93 CAM_DIS_AUTODISC = 0x02000000,/* Disable auto disconnect */ 94 CAM_TGT_CCB_AVAIL = 0x04000000,/* Target CCB available */ 95 CAM_TGT_PHASE_MODE = 0x08000000,/* The SIM runs in phase mode */ 96 CAM_MSGB_VALID = 0x10000000,/* Message buffer valid */ 97 CAM_STATUS_VALID = 0x20000000,/* Status buffer valid */ 98 CAM_DATAB_VALID = 0x40000000,/* Data buffer valid */ 99 100 /* Host target Mode flags */ 101 CAM_SEND_SENSE = 0x08000000,/* Send sense data with status */ 102 CAM_TERM_IO = 0x10000000,/* Terminate I/O Message sup. */ 103 CAM_DISCONNECT = 0x20000000,/* Disconnects are mandatory */ 104 CAM_SEND_STATUS = 0x40000000 /* Send status after data phase */ 105 } ccb_flags; 106 107 /* XPT Opcodes for xpt_action */ 108 typedef enum { 109 /* Function code flags are bits greater than 0xff */ 110 XPT_FC_QUEUED = 0x100, 111 /* Non-immediate function code */ 112 XPT_FC_USER_CCB = 0x200, 113 XPT_FC_XPT_ONLY = 0x400, 114 /* Only for the transport layer device */ 115 XPT_FC_DEV_QUEUED = 0x800 | XPT_FC_QUEUED, 116 /* Passes through the device queues */ 117 /* Common function commands: 0x00->0x0F */ 118 XPT_NOOP = 0x00, 119 /* Execute Nothing */ 120 XPT_SCSI_IO = 0x01 | XPT_FC_DEV_QUEUED, 121 /* Execute the requested I/O operation */ 122 XPT_GDEV_TYPE = 0x02, 123 /* Get type information for specified device */ 124 XPT_GDEVLIST = 0x03, 125 /* Get a list of peripheral devices */ 126 XPT_PATH_INQ = 0x04, 127 /* Path routing inquiry */ 128 XPT_REL_SIMQ = 0x05, 129 /* Release a frozen SIM queue */ 130 XPT_SASYNC_CB = 0x06, 131 /* Set Asynchronous Callback Parameters */ 132 XPT_SDEV_TYPE = 0x07, 133 /* Set device type information */ 134 XPT_SCAN_BUS = 0x08 | XPT_FC_QUEUED | XPT_FC_USER_CCB 135 | XPT_FC_XPT_ONLY, 136 /* (Re)Scan the SCSI Bus */ 137 XPT_DEV_MATCH = 0x09 | XPT_FC_XPT_ONLY, 138 /* Get EDT entries matching the given pattern */ 139 XPT_DEBUG = 0x0a, 140 /* Turn on debugging for a bus, target or lun */ 141 XPT_PATH_STATS = 0x0b, 142 /* Path statistics (error counts, etc.) */ 143 XPT_GDEV_STATS = 0x0c, 144 /* Device statistics (error counts, etc.) */ 145 /* SCSI Control Functions: 0x10->0x1F */ 146 XPT_ABORT = 0x10, 147 /* Abort the specified CCB */ 148 XPT_RESET_BUS = 0x11 | XPT_FC_XPT_ONLY, 149 /* Reset the specified SCSI bus */ 150 XPT_RESET_DEV = 0x12 | XPT_FC_DEV_QUEUED, 151 /* Bus Device Reset the specified SCSI device */ 152 XPT_TERM_IO = 0x13, 153 /* Terminate the I/O process */ 154 XPT_SCAN_LUN = 0x14 | XPT_FC_QUEUED | XPT_FC_USER_CCB 155 | XPT_FC_XPT_ONLY, 156 /* Scan Logical Unit */ 157 XPT_GET_TRAN_SETTINGS = 0x15, 158 /* 159 * Get default/user transfer settings 160 * for the target 161 */ 162 XPT_SET_TRAN_SETTINGS = 0x16, 163 /* 164 * Set transfer rate/width 165 * negotiation settings 166 */ 167 XPT_CALC_GEOMETRY = 0x17, 168 /* 169 * Calculate the geometry parameters for 170 * a device give the sector size and 171 * volume size. 172 */ 173 174 /* HBA engine commands 0x20->0x2F */ 175 XPT_ENG_INQ = 0x20 | XPT_FC_XPT_ONLY, 176 /* HBA engine feature inquiry */ 177 XPT_ENG_EXEC = 0x21 | XPT_FC_DEV_QUEUED, 178 /* HBA execute engine request */ 179 180 /* Target mode commands: 0x30->0x3F */ 181 XPT_EN_LUN = 0x30, 182 /* Enable LUN as a target */ 183 XPT_TARGET_IO = 0x31 | XPT_FC_DEV_QUEUED, 184 /* Execute target I/O request */ 185 XPT_ACCEPT_TARGET_IO = 0x32 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 186 /* Accept Host Target Mode CDB */ 187 XPT_CONT_TARGET_IO = 0x33 | XPT_FC_DEV_QUEUED, 188 /* Continue Host Target I/O Connection */ 189 XPT_IMMED_NOTIFY = 0x34 | XPT_FC_QUEUED | XPT_FC_USER_CCB, 190 /* Notify Host Target driver of event */ 191 XPT_NOTIFY_ACK = 0x35, 192 /* Acknowledgement of event */ 193 194 /* Vendor Unique codes: 0x80->0x8F */ 195 XPT_VUNIQUE = 0x80 196 } xpt_opcode; 197 198 #define XPT_FC_GROUP_MASK 0xF0 199 #define XPT_FC_GROUP(op) ((op) & XPT_FC_GROUP_MASK) 200 #define XPT_FC_GROUP_COMMON 0x00 201 #define XPT_FC_GROUP_SCSI_CONTROL 0x10 202 #define XPT_FC_GROUP_HBA_ENGINE 0x20 203 #define XPT_FC_GROUP_TMODE 0x30 204 #define XPT_FC_GROUP_VENDOR_UNIQUE 0x80 205 206 #define XPT_FC_IS_DEV_QUEUED(ccb) \ 207 (((ccb)->ccb_h.func_code & XPT_FC_DEV_QUEUED) == XPT_FC_DEV_QUEUED) 208 #define XPT_FC_IS_QUEUED(ccb) \ 209 (((ccb)->ccb_h.func_code & XPT_FC_QUEUED) != 0) 210 211 #ifdef CAM_NEW_TRAN_CODE 212 typedef enum { 213 PROTO_UNKNOWN, 214 PROTO_UNSPECIFIED, 215 PROTO_SCSI, /* Small Computer System Interface */ 216 PROTO_ATA, /* AT Attachment */ 217 PROTO_ATAPI, /* AT Attachment Packetized Interface */ 218 } cam_proto; 219 220 typedef enum { 221 XPORT_UNKNOWN, 222 XPORT_UNSPECIFIED, 223 XPORT_SPI, /* SCSI Parallel Interface */ 224 XPORT_FC, /* Fiber Channel */ 225 XPORT_SSA, /* Serial Storage Architecture */ 226 XPORT_USB, /* Universal Serial Bus */ 227 XPORT_PPB, /* Parallel Port Bus */ 228 XPORT_ATA /* AT Attachment */ 229 } cam_xport; 230 231 #define PROTO_VERSION_UNKNOWN (UINT_MAX - 1) 232 #define PROTO_VERSION_UNSPECIFIED UINT_MAX 233 #define XPORT_VERSION_UNKNOWN (UINT_MAX - 1) 234 #define XPORT_VERSION_UNSPECIFIED UINT_MAX 235 #endif /* CAM_NEW_TRAN_CODE */ 236 237 typedef union { 238 LIST_ENTRY(ccb_hdr) le; 239 SLIST_ENTRY(ccb_hdr) sle; 240 TAILQ_ENTRY(ccb_hdr) tqe; 241 STAILQ_ENTRY(ccb_hdr) stqe; 242 } camq_entry; 243 244 typedef union { 245 void *ptr; 246 u_long field; 247 u_int8_t bytes[sizeof(void *) > sizeof(u_long) 248 ? sizeof(void *) : sizeof(u_long)]; 249 } ccb_priv_entry; 250 251 typedef union { 252 ccb_priv_entry entries[CCB_PERIPH_PRIV_SIZE]; 253 u_int8_t bytes[CCB_PERIPH_PRIV_SIZE * sizeof(ccb_priv_entry)]; 254 } ccb_ppriv_area; 255 256 typedef union { 257 ccb_priv_entry entries[CCB_SIM_PRIV_SIZE]; 258 u_int8_t bytes[CCB_SIM_PRIV_SIZE * sizeof(ccb_priv_entry)]; 259 } ccb_spriv_area; 260 261 struct ccb_hdr { 262 cam_pinfo pinfo; /* Info for priority scheduling */ 263 camq_entry xpt_links; /* For chaining in the XPT layer */ 264 camq_entry sim_links; /* For chaining in the SIM layer */ 265 camq_entry periph_links;/* For chaining in the type driver */ 266 u_int32_t retry_count; 267 /* Callback on completion function */ 268 void (*cbfcnp)(struct cam_periph *, union ccb *); 269 xpt_opcode func_code; /* XPT function code */ 270 u_int32_t status; /* Status returned by CAM subsystem */ 271 /* Compiled path for this ccb */ 272 struct cam_path *path; 273 path_id_t path_id; /* Path ID for the request */ 274 target_id_t target_id; /* Target device ID */ 275 lun_id_t target_lun; /* Target LUN number */ 276 u_int32_t flags; 277 ccb_ppriv_area periph_priv; 278 ccb_spriv_area sim_priv; 279 u_int32_t timeout; /* Timeout value */ 280 /* Callout handle used for timeouts */ 281 struct callout timeout_ch; 282 }; 283 284 /* Get Device Information CCB */ 285 struct ccb_getdev { 286 struct ccb_hdr ccb_h; 287 struct scsi_inquiry_data inq_data; 288 u_int8_t serial_num[252]; 289 u_int8_t reserved; 290 u_int8_t serial_num_len; 291 }; 292 293 /* Device Statistics CCB */ 294 struct ccb_getdevstats { 295 struct ccb_hdr ccb_h; 296 int dev_openings; /* Space left for more work on device*/ 297 int dev_active; /* Transactions running on the device */ 298 int devq_openings; /* Space left for more queued work */ 299 int devq_queued; /* Transactions queued to be sent */ 300 int held; /* 301 * CCBs held by peripheral drivers 302 * for this device 303 */ 304 int maxtags; /* 305 * Boundary conditions for number of 306 * tagged operations 307 */ 308 int mintags; 309 struct timeval last_reset; /* Uptime of last bus reset/loop init */ 310 }; 311 312 typedef enum { 313 CAM_GDEVLIST_LAST_DEVICE, 314 CAM_GDEVLIST_LIST_CHANGED, 315 CAM_GDEVLIST_MORE_DEVS, 316 CAM_GDEVLIST_ERROR 317 } ccb_getdevlist_status_e; 318 319 struct ccb_getdevlist { 320 struct ccb_hdr ccb_h; 321 char periph_name[DEV_IDLEN]; 322 u_int32_t unit_number; 323 unsigned int generation; 324 u_int32_t index; 325 ccb_getdevlist_status_e status; 326 }; 327 328 typedef enum { 329 PERIPH_MATCH_NONE = 0x000, 330 PERIPH_MATCH_PATH = 0x001, 331 PERIPH_MATCH_TARGET = 0x002, 332 PERIPH_MATCH_LUN = 0x004, 333 PERIPH_MATCH_NAME = 0x008, 334 PERIPH_MATCH_UNIT = 0x010, 335 PERIPH_MATCH_ANY = 0x01f 336 } periph_pattern_flags; 337 338 struct periph_match_pattern { 339 char periph_name[DEV_IDLEN]; 340 u_int32_t unit_number; 341 path_id_t path_id; 342 target_id_t target_id; 343 lun_id_t target_lun; 344 periph_pattern_flags flags; 345 }; 346 347 typedef enum { 348 DEV_MATCH_NONE = 0x000, 349 DEV_MATCH_PATH = 0x001, 350 DEV_MATCH_TARGET = 0x002, 351 DEV_MATCH_LUN = 0x004, 352 DEV_MATCH_INQUIRY = 0x008, 353 DEV_MATCH_ANY = 0x00f 354 } dev_pattern_flags; 355 356 struct device_match_pattern { 357 path_id_t path_id; 358 target_id_t target_id; 359 lun_id_t target_lun; 360 struct scsi_static_inquiry_pattern inq_pat; 361 dev_pattern_flags flags; 362 }; 363 364 typedef enum { 365 BUS_MATCH_NONE = 0x000, 366 BUS_MATCH_PATH = 0x001, 367 BUS_MATCH_NAME = 0x002, 368 BUS_MATCH_UNIT = 0x004, 369 BUS_MATCH_BUS_ID = 0x008, 370 BUS_MATCH_ANY = 0x00f 371 } bus_pattern_flags; 372 373 struct bus_match_pattern { 374 path_id_t path_id; 375 char dev_name[DEV_IDLEN]; 376 u_int32_t unit_number; 377 u_int32_t bus_id; 378 bus_pattern_flags flags; 379 }; 380 381 union match_pattern { 382 struct periph_match_pattern periph_pattern; 383 struct device_match_pattern device_pattern; 384 struct bus_match_pattern bus_pattern; 385 }; 386 387 typedef enum { 388 DEV_MATCH_PERIPH, 389 DEV_MATCH_DEVICE, 390 DEV_MATCH_BUS 391 } dev_match_type; 392 393 struct dev_match_pattern { 394 dev_match_type type; 395 union match_pattern pattern; 396 }; 397 398 struct periph_match_result { 399 char periph_name[DEV_IDLEN]; 400 u_int32_t unit_number; 401 path_id_t path_id; 402 target_id_t target_id; 403 lun_id_t target_lun; 404 }; 405 406 typedef enum { 407 DEV_RESULT_NOFLAG = 0x00, 408 DEV_RESULT_UNCONFIGURED = 0x01 409 } dev_result_flags; 410 411 struct device_match_result { 412 path_id_t path_id; 413 target_id_t target_id; 414 lun_id_t target_lun; 415 struct scsi_inquiry_data inq_data; 416 dev_result_flags flags; 417 }; 418 419 struct bus_match_result { 420 path_id_t path_id; 421 char dev_name[DEV_IDLEN]; 422 u_int32_t unit_number; 423 u_int32_t bus_id; 424 }; 425 426 union match_result { 427 struct periph_match_result periph_result; 428 struct device_match_result device_result; 429 struct bus_match_result bus_result; 430 }; 431 432 struct dev_match_result { 433 dev_match_type type; 434 union match_result result; 435 }; 436 437 typedef enum { 438 CAM_DEV_MATCH_LAST, 439 CAM_DEV_MATCH_MORE, 440 CAM_DEV_MATCH_LIST_CHANGED, 441 CAM_DEV_MATCH_SIZE_ERROR, 442 CAM_DEV_MATCH_ERROR 443 } ccb_dev_match_status; 444 445 typedef enum { 446 CAM_DEV_POS_NONE = 0x000, 447 CAM_DEV_POS_BUS = 0x001, 448 CAM_DEV_POS_TARGET = 0x002, 449 CAM_DEV_POS_DEVICE = 0x004, 450 CAM_DEV_POS_PERIPH = 0x008, 451 CAM_DEV_POS_PDPTR = 0x010, 452 CAM_DEV_POS_TYPEMASK = 0xf00, 453 CAM_DEV_POS_EDT = 0x100, 454 CAM_DEV_POS_PDRV = 0x200 455 } dev_pos_type; 456 457 struct ccb_dm_cookie { 458 void *bus; 459 void *target; 460 void *device; 461 void *periph; 462 void *pdrv; 463 }; 464 465 struct ccb_dev_position { 466 u_int generations[4]; 467 #define CAM_BUS_GENERATION 0x00 468 #define CAM_TARGET_GENERATION 0x01 469 #define CAM_DEV_GENERATION 0x02 470 #define CAM_PERIPH_GENERATION 0x03 471 dev_pos_type position_type; 472 struct ccb_dm_cookie cookie; 473 }; 474 475 struct ccb_dev_match { 476 struct ccb_hdr ccb_h; 477 ccb_dev_match_status status; 478 u_int32_t num_patterns; 479 u_int32_t pattern_buf_len; 480 struct dev_match_pattern *patterns; 481 u_int32_t num_matches; 482 u_int32_t match_buf_len; 483 struct dev_match_result *matches; 484 struct ccb_dev_position pos; 485 }; 486 487 /* 488 * Definitions for the path inquiry CCB fields. 489 */ 490 #define CAM_VERSION 0x15 /* Hex value for current version */ 491 492 typedef enum { 493 PI_MDP_ABLE = 0x80, /* Supports MDP message */ 494 PI_WIDE_32 = 0x40, /* Supports 32 bit wide SCSI */ 495 PI_WIDE_16 = 0x20, /* Supports 16 bit wide SCSI */ 496 PI_SDTR_ABLE = 0x10, /* Supports SDTR message */ 497 PI_LINKED_CDB = 0x08, /* Supports linked CDBs */ 498 PI_TAG_ABLE = 0x02, /* Supports tag queue messages */ 499 PI_SOFT_RST = 0x01 /* Supports soft reset alternative */ 500 } pi_inqflag; 501 502 typedef enum { 503 PIT_PROCESSOR = 0x80, /* Target mode processor mode */ 504 PIT_PHASE = 0x40, /* Target mode phase cog. mode */ 505 PIT_DISCONNECT = 0x20, /* Disconnects supported in target mode */ 506 PIT_TERM_IO = 0x10, /* Terminate I/O message supported in TM */ 507 PIT_GRP_6 = 0x08, /* Group 6 commands supported */ 508 PIT_GRP_7 = 0x04 /* Group 7 commands supported */ 509 } pi_tmflag; 510 511 typedef enum { 512 PIM_SCANHILO = 0x80, /* Bus scans from high ID to low ID */ 513 PIM_NOREMOVE = 0x40, /* Removeable devices not included in scan */ 514 PIM_NOINITIATOR = 0x20, /* Initiator role not supported. */ 515 PIM_NOBUSRESET = 0x10, /* User has disabled initial BUS RESET */ 516 PIM_NO_6_BYTE = 0x08 /* Do not send 6-byte commands */ 517 } pi_miscflag; 518 519 #ifdef CAM_NEW_TRAN_CODE 520 /* Path Inquiry CCB */ 521 struct ccb_pathinq_settings_spi { 522 u_int8_t ppr_options; 523 }; 524 struct ccb_pathinq_settings_fc { 525 u_int64_t wwnn; /* world wide node name */ 526 u_int64_t wwpn; /* world wide port name */ 527 u_int32_t port; /* 24 bit port id, if known */ 528 u_int32_t bitrate; /* Mbps */ 529 }; 530 #define PATHINQ_SETTINGS_SIZE 128 531 #endif /* CAM_NEW_TRAN_CODE */ 532 533 struct ccb_pathinq { 534 struct ccb_hdr ccb_h; 535 u_int8_t version_num; /* Version number for the SIM/HBA */ 536 u_int8_t hba_inquiry; /* Mimic of INQ byte 7 for the HBA */ 537 u_int8_t target_sprt; /* Flags for target mode support */ 538 u_int8_t hba_misc; /* Misc HBA features */ 539 u_int16_t hba_eng_cnt; /* HBA engine count */ 540 /* Vendor Unique capabilities */ 541 u_int8_t vuhba_flags[VUHBALEN]; 542 u_int32_t max_target; /* Maximum supported Target */ 543 u_int32_t max_lun; /* Maximum supported Lun */ 544 u_int32_t async_flags; /* Installed Async handlers */ 545 path_id_t hpath_id; /* Highest Path ID in the subsystem */ 546 target_id_t initiator_id; /* ID of the HBA on the SCSI bus */ 547 char sim_vid[SIM_IDLEN]; /* Vendor ID of the SIM */ 548 char hba_vid[HBA_IDLEN]; /* Vendor ID of the HBA */ 549 char dev_name[DEV_IDLEN];/* Device name for SIM */ 550 u_int32_t unit_number; /* Unit number for SIM */ 551 u_int32_t bus_id; /* Bus ID for SIM */ 552 u_int32_t base_transfer_speed;/* Base bus speed in KB/sec */ 553 #ifdef CAM_NEW_TRAN_CODE 554 cam_proto protocol; 555 u_int protocol_version; 556 cam_xport transport; 557 u_int transport_version; 558 union { 559 struct ccb_pathinq_settings_spi spi; 560 struct ccb_pathinq_settings_fc fc; 561 char ccb_pathinq_settings_opaque[PATHINQ_SETTINGS_SIZE]; 562 } xport_specific; 563 #endif /* CAM_NEW_TRAN_CODE */ 564 }; 565 566 /* Path Statistics CCB */ 567 struct ccb_pathstats { 568 struct ccb_hdr ccb_h; 569 struct timeval last_reset; /* Uptime of last bus reset/loop init */ 570 }; 571 572 typedef union { 573 u_int8_t *sense_ptr; /* 574 * Pointer to storage 575 * for sense information 576 */ 577 /* Storage Area for sense information */ 578 struct scsi_sense_data sense_buf; 579 } sense_t; 580 581 typedef union { 582 u_int8_t *cdb_ptr; /* Pointer to the CDB bytes to send */ 583 /* Area for the CDB send */ 584 u_int8_t cdb_bytes[IOCDBLEN]; 585 } cdb_t; 586 587 /* 588 * SCSI I/O Request CCB used for the XPT_SCSI_IO and XPT_CONT_TARGET_IO 589 * function codes. 590 */ 591 struct ccb_scsiio { 592 struct ccb_hdr ccb_h; 593 union ccb *next_ccb; /* Ptr for next CCB for action */ 594 u_int8_t *req_map; /* Ptr to mapping info */ 595 u_int8_t *data_ptr; /* Ptr to the data buf/SG list */ 596 u_int32_t dxfer_len; /* Data transfer length */ 597 /* Autosense storage */ 598 struct scsi_sense_data sense_data; 599 u_int8_t sense_len; /* Number of bytes to autosense */ 600 u_int8_t cdb_len; /* Number of bytes for the CDB */ 601 u_int16_t sglist_cnt; /* Number of SG list entries */ 602 u_int8_t scsi_status; /* Returned SCSI status */ 603 u_int8_t sense_resid; /* Autosense resid length: 2's comp */ 604 u_int32_t resid; /* Transfer residual length: 2's comp */ 605 cdb_t cdb_io; /* Union for CDB bytes/pointer */ 606 u_int8_t *msg_ptr; /* Pointer to the message buffer */ 607 u_int16_t msg_len; /* Number of bytes for the Message */ 608 u_int8_t tag_action; /* What to do for tag queueing */ 609 /* 610 * The tag action should be either the define below (to send a 611 * non-tagged transaction) or one of the defined scsi tag messages 612 * from scsi_message.h. 613 */ 614 #define CAM_TAG_ACTION_NONE 0x00 615 u_int tag_id; /* tag id from initator (target mode) */ 616 u_int init_id; /* initiator id of who selected */ 617 }; 618 619 struct ccb_accept_tio { 620 struct ccb_hdr ccb_h; 621 cdb_t cdb_io; /* Union for CDB bytes/pointer */ 622 u_int8_t cdb_len; /* Number of bytes for the CDB */ 623 u_int8_t tag_action; /* What to do for tag queueing */ 624 u_int8_t sense_len; /* Number of bytes of Sense Data */ 625 u_int tag_id; /* tag id from initator (target mode) */ 626 u_int init_id; /* initiator id of who selected */ 627 struct scsi_sense_data sense_data; 628 }; 629 630 /* Release SIM Queue */ 631 struct ccb_relsim { 632 struct ccb_hdr ccb_h; 633 u_int32_t release_flags; 634 #define RELSIM_ADJUST_OPENINGS 0x01 635 #define RELSIM_RELEASE_AFTER_TIMEOUT 0x02 636 #define RELSIM_RELEASE_AFTER_CMDCMPLT 0x04 637 #define RELSIM_RELEASE_AFTER_QEMPTY 0x08 638 u_int32_t openings; 639 u_int32_t release_timeout; 640 u_int32_t qfrozen_cnt; 641 }; 642 643 /* 644 * Definitions for the asynchronous callback CCB fields. 645 */ 646 typedef enum { 647 AC_GETDEV_CHANGED = 0x800,/* Getdev info might have changed */ 648 AC_INQ_CHANGED = 0x400,/* Inquiry info might have changed */ 649 AC_TRANSFER_NEG = 0x200,/* New transfer settings in effect */ 650 AC_LOST_DEVICE = 0x100,/* A device went away */ 651 AC_FOUND_DEVICE = 0x080,/* A new device was found */ 652 AC_PATH_DEREGISTERED = 0x040,/* A path has de-registered */ 653 AC_PATH_REGISTERED = 0x020,/* A new path has been registered */ 654 AC_SENT_BDR = 0x010,/* A BDR message was sent to target */ 655 AC_SCSI_AEN = 0x008,/* A SCSI AEN has been received */ 656 AC_UNSOL_RESEL = 0x002,/* Unsolicited reselection occurred */ 657 AC_BUS_RESET = 0x001 /* A SCSI bus reset occurred */ 658 } ac_code; 659 660 typedef void ac_callback_t (void *softc, u_int32_t code, 661 struct cam_path *path, void *args); 662 663 /* Set Asynchronous Callback CCB */ 664 struct ccb_setasync { 665 struct ccb_hdr ccb_h; 666 u_int32_t event_enable; /* Async Event enables */ 667 ac_callback_t *callback; 668 void *callback_arg; 669 }; 670 671 /* Set Device Type CCB */ 672 struct ccb_setdev { 673 struct ccb_hdr ccb_h; 674 u_int8_t dev_type; /* Value for dev type field in EDT */ 675 }; 676 677 /* SCSI Control Functions */ 678 679 /* Abort XPT request CCB */ 680 struct ccb_abort { 681 struct ccb_hdr ccb_h; 682 union ccb *abort_ccb; /* Pointer to CCB to abort */ 683 }; 684 685 /* Reset SCSI Bus CCB */ 686 struct ccb_resetbus { 687 struct ccb_hdr ccb_h; 688 }; 689 690 /* Reset SCSI Device CCB */ 691 struct ccb_resetdev { 692 struct ccb_hdr ccb_h; 693 }; 694 695 /* Terminate I/O Process Request CCB */ 696 struct ccb_termio { 697 struct ccb_hdr ccb_h; 698 union ccb *termio_ccb; /* Pointer to CCB to terminate */ 699 }; 700 701 #ifndef CAM_NEW_TRAN_CODE 702 /* Get/Set transfer rate/width/disconnection/tag queueing settings */ 703 struct ccb_trans_settings { 704 struct ccb_hdr ccb_h; 705 u_int valid; /* Which fields to honor */ 706 #define CCB_TRANS_SYNC_RATE_VALID 0x01 707 #define CCB_TRANS_SYNC_OFFSET_VALID 0x02 708 #define CCB_TRANS_BUS_WIDTH_VALID 0x04 709 #define CCB_TRANS_DISC_VALID 0x08 710 #define CCB_TRANS_TQ_VALID 0x10 711 u_int flags; 712 #define CCB_TRANS_CURRENT_SETTINGS 0x01 713 #define CCB_TRANS_USER_SETTINGS 0x02 714 #define CCB_TRANS_DISC_ENB 0x04 715 #define CCB_TRANS_TAG_ENB 0x08 716 u_int sync_period; 717 u_int sync_offset; 718 u_int bus_width; 719 }; 720 721 #else /* CAM_NEW_TRAN_CODE */ 722 typedef enum { 723 CTS_TYPE_CURRENT_SETTINGS, 724 CTS_TYPE_USER_SETTINGS 725 } cts_type; 726 727 struct ccb_trans_settings_scsi 728 { 729 u_int valid; /* Which fields to honor */ 730 #define CTS_SCSI_VALID_TQ 0x01 731 u_int flags; 732 #define CTS_SCSI_FLAGS_TAG_ENB 0x01 733 }; 734 735 struct ccb_trans_settings_spi 736 { 737 u_int valid; /* Which fields to honor */ 738 #define CTS_SPI_VALID_SYNC_RATE 0x01 739 #define CTS_SPI_VALID_SYNC_OFFSET 0x02 740 #define CTS_SPI_VALID_BUS_WIDTH 0x04 741 #define CTS_SPI_VALID_DISC 0x08 742 #define CTS_SPI_VALID_PPR_OPTIONS 0x10 743 u_int flags; 744 #define CTS_SPI_FLAGS_DISC_ENB 0x01 745 #define CTS_SPI_FLAGS_TAG_ENB 0x02 746 u_int sync_period; 747 u_int sync_offset; 748 u_int bus_width; 749 u_int ppr_options; 750 }; 751 752 struct ccb_trans_settings_fc { 753 u_int valid; /* Which fields to honor */ 754 #define CTS_FC_VALID_WWNN 0x8000 755 #define CTS_FC_VALID_WWPN 0x4000 756 #define CTS_FC_VALID_PORT 0x2000 757 #define CTS_FC_VALID_SPEED 0x1000 758 u_int64_t wwnn; /* world wide node name */ 759 u_int64_t wwpn; /* world wide port name */ 760 u_int32_t port; /* 24 bit port id, if known */ 761 u_int32_t bitrate; /* Mbps */ 762 }; 763 764 /* Get/Set transfer rate/width/disconnection/tag queueing settings */ 765 struct ccb_trans_settings { 766 struct ccb_hdr ccb_h; 767 cts_type type; /* Current or User settings */ 768 cam_proto protocol; 769 u_int protocol_version; 770 cam_xport transport; 771 u_int transport_version; 772 union { 773 u_int valid; /* Which fields to honor */ 774 struct ccb_trans_settings_scsi scsi; 775 } proto_specific; 776 union { 777 u_int valid; /* Which fields to honor */ 778 struct ccb_trans_settings_spi spi; 779 struct ccb_trans_settings_fc fc; 780 } xport_specific; 781 }; 782 783 #endif /* CAM_NEW_TRAN_CODE */ 784 785 /* 786 * Calculate the geometry parameters for a device 787 * give the block size and volume size in blocks. 788 */ 789 struct ccb_calc_geometry { 790 struct ccb_hdr ccb_h; 791 u_int32_t block_size; 792 u_int64_t volume_size; 793 u_int32_t cylinders; 794 u_int8_t heads; 795 u_int8_t secs_per_track; 796 }; 797 798 /* 799 * Rescan the given bus, or bus/target/lun 800 */ 801 struct ccb_rescan { 802 struct ccb_hdr ccb_h; 803 cam_flags flags; 804 }; 805 806 /* 807 * Turn on debugging for the given bus, bus/target, or bus/target/lun. 808 */ 809 struct ccb_debug { 810 struct ccb_hdr ccb_h; 811 cam_debug_flags flags; 812 }; 813 814 /* Target mode structures. */ 815 816 struct ccb_en_lun { 817 struct ccb_hdr ccb_h; 818 u_int16_t grp6_len; /* Group 6 VU CDB length */ 819 u_int16_t grp7_len; /* Group 7 VU CDB length */ 820 u_int8_t enable; 821 }; 822 823 struct ccb_immed_notify { 824 struct ccb_hdr ccb_h; 825 struct scsi_sense_data sense_data; 826 u_int8_t sense_len; /* Number of bytes in sense buffer */ 827 u_int8_t initiator_id; /* Id of initiator that selected */ 828 u_int8_t message_args[7]; /* Message Arguments */ 829 }; 830 831 struct ccb_notify_ack { 832 struct ccb_hdr ccb_h; 833 u_int16_t seq_id; /* Sequence identifier */ 834 u_int8_t event; /* Event flags */ 835 }; 836 837 /* HBA engine structures. */ 838 839 typedef enum { 840 EIT_BUFFER, /* Engine type: buffer memory */ 841 EIT_LOSSLESS, /* Engine type: lossless compression */ 842 EIT_LOSSY, /* Engine type: lossy compression */ 843 EIT_ENCRYPT /* Engine type: encryption */ 844 } ei_type; 845 846 typedef enum { 847 EAD_VUNIQUE, /* Engine algorithm ID: vendor unique */ 848 EAD_LZ1V1, /* Engine algorithm ID: LZ1 var.1 */ 849 EAD_LZ2V1, /* Engine algorithm ID: LZ2 var.1 */ 850 EAD_LZ2V2 /* Engine algorithm ID: LZ2 var.2 */ 851 } ei_algo; 852 853 struct ccb_eng_inq { 854 struct ccb_hdr ccb_h; 855 u_int16_t eng_num; /* The engine number for this inquiry */ 856 ei_type eng_type; /* Returned engine type */ 857 ei_algo eng_algo; /* Returned engine algorithm type */ 858 u_int32_t eng_memeory; /* Returned engine memory size */ 859 }; 860 861 struct ccb_eng_exec { /* This structure must match SCSIIO size */ 862 struct ccb_hdr ccb_h; 863 u_int8_t *pdrv_ptr; /* Ptr used by the peripheral driver */ 864 u_int8_t *req_map; /* Ptr for mapping info on the req. */ 865 u_int8_t *data_ptr; /* Pointer to the data buf/SG list */ 866 u_int32_t dxfer_len; /* Data transfer length */ 867 u_int8_t *engdata_ptr; /* Pointer to the engine buffer data */ 868 u_int16_t sglist_cnt; /* Num of scatter gather list entries */ 869 u_int32_t dmax_len; /* Destination data maximum length */ 870 u_int32_t dest_len; /* Destination data length */ 871 int32_t src_resid; /* Source residual length: 2's comp */ 872 u_int32_t timeout; /* Timeout value */ 873 u_int16_t eng_num; /* Engine number for this request */ 874 u_int16_t vu_flags; /* Vendor Unique flags */ 875 }; 876 877 /* 878 * Definitions for the timeout field in the SCSI I/O CCB. 879 */ 880 #define CAM_TIME_DEFAULT 0x00000000 /* Use SIM default value */ 881 #define CAM_TIME_INFINITY 0xFFFFFFFF /* Infinite timeout */ 882 883 #define CAM_SUCCESS 0 /* For signaling general success */ 884 #define CAM_FAILURE 1 /* For signaling general failure */ 885 886 #define CAM_FALSE 0 887 #define CAM_TRUE 1 888 889 #define XPT_CCB_INVALID -1 /* for signaling a bad CCB to free */ 890 891 /* 892 * Union of all CCB types for kernel space allocation. This union should 893 * never be used for manipulating CCBs - its only use is for the allocation 894 * and deallocation of raw CCB space and is the return type of xpt_ccb_alloc 895 * and the argument to xpt_ccb_free. 896 */ 897 union ccb { 898 struct ccb_hdr ccb_h; /* For convenience */ 899 struct ccb_scsiio csio; 900 struct ccb_getdev cgd; 901 struct ccb_getdevlist cgdl; 902 struct ccb_pathinq cpi; 903 struct ccb_relsim crs; 904 struct ccb_setasync csa; 905 struct ccb_setdev csd; 906 struct ccb_pathstats cpis; 907 struct ccb_getdevstats cgds; 908 struct ccb_dev_match cdm; 909 struct ccb_trans_settings cts; 910 struct ccb_calc_geometry ccg; 911 struct ccb_abort cab; 912 struct ccb_resetbus crb; 913 struct ccb_resetdev crd; 914 struct ccb_termio tio; 915 struct ccb_accept_tio atio; 916 struct ccb_scsiio ctio; 917 struct ccb_en_lun cel; 918 struct ccb_immed_notify cin; 919 struct ccb_notify_ack cna; 920 struct ccb_eng_inq cei; 921 struct ccb_eng_exec cee; 922 struct ccb_rescan crcn; 923 struct ccb_debug cdbg; 924 }; 925 926 __BEGIN_DECLS 927 static __inline void 928 cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, 929 void (*cbfcnp)(struct cam_periph *, union ccb *), 930 u_int32_t flags, u_int8_t tag_action, 931 u_int8_t *data_ptr, u_int32_t dxfer_len, 932 u_int8_t sense_len, u_int8_t cdb_len, 933 u_int32_t timeout); 934 935 static __inline void 936 cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, 937 void (*cbfcnp)(struct cam_periph *, union ccb *), 938 u_int32_t flags, u_int tag_action, u_int tag_id, 939 u_int init_id, u_int scsi_status, u_int8_t *data_ptr, 940 u_int32_t dxfer_len, u_int32_t timeout); 941 942 static __inline void 943 cam_fill_csio(struct ccb_scsiio *csio, u_int32_t retries, 944 void (*cbfcnp)(struct cam_periph *, union ccb *), 945 u_int32_t flags, u_int8_t tag_action, 946 u_int8_t *data_ptr, u_int32_t dxfer_len, 947 u_int8_t sense_len, u_int8_t cdb_len, 948 u_int32_t timeout) 949 { 950 csio->ccb_h.func_code = XPT_SCSI_IO; 951 csio->ccb_h.flags = flags; 952 csio->ccb_h.retry_count = retries; 953 csio->ccb_h.cbfcnp = cbfcnp; 954 csio->ccb_h.timeout = timeout; 955 csio->data_ptr = data_ptr; 956 csio->dxfer_len = dxfer_len; 957 csio->sense_len = sense_len; 958 csio->cdb_len = cdb_len; 959 csio->tag_action = tag_action; 960 } 961 962 static __inline void 963 cam_fill_ctio(struct ccb_scsiio *csio, u_int32_t retries, 964 void (*cbfcnp)(struct cam_periph *, union ccb *), 965 u_int32_t flags, u_int tag_action, u_int tag_id, 966 u_int init_id, u_int scsi_status, u_int8_t *data_ptr, 967 u_int32_t dxfer_len, u_int32_t timeout) 968 { 969 csio->ccb_h.func_code = XPT_CONT_TARGET_IO; 970 csio->ccb_h.flags = flags; 971 csio->ccb_h.retry_count = retries; 972 csio->ccb_h.cbfcnp = cbfcnp; 973 csio->ccb_h.timeout = timeout; 974 csio->data_ptr = data_ptr; 975 csio->dxfer_len = dxfer_len; 976 csio->scsi_status = scsi_status; 977 csio->tag_action = tag_action; 978 csio->tag_id = tag_id; 979 csio->init_id = init_id; 980 } 981 982 void cam_calc_geometry(struct ccb_calc_geometry *ccg, int extended); 983 984 __END_DECLS 985 986 #endif /* _CAM_CAM_CCB_H */ 987