1 /*- 2 * Copyright (c) 2006 M. Warner Losh. All rights reserved. 3 * Copyright (c) 2017 Marius Strobl <marius@FreeBSD.org> 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 15 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 16 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 17 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 18 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 19 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 20 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 21 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 22 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 23 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 24 * 25 * Portions of this software may have been developed with reference to 26 * the SD Simplified Specification. The following disclaimer may apply: 27 * 28 * The following conditions apply to the release of the simplified 29 * specification ("Simplified Specification") by the SD Card Association and 30 * the SD Group. The Simplified Specification is a subset of the complete SD 31 * Specification which is owned by the SD Card Association and the SD 32 * Group. This Simplified Specification is provided on a non-confidential 33 * basis subject to the disclaimers below. Any implementation of the 34 * Simplified Specification may require a license from the SD Card 35 * Association, SD Group, SD-3C LLC or other third parties. 36 * 37 * Disclaimers: 38 * 39 * The information contained in the Simplified Specification is presented only 40 * as a standard specification for SD Cards and SD Host/Ancillary products and 41 * is provided "AS-IS" without any representations or warranties of any 42 * kind. No responsibility is assumed by the SD Group, SD-3C LLC or the SD 43 * Card Association for any damages, any infringements of patents or other 44 * right of the SD Group, SD-3C LLC, the SD Card Association or any third 45 * parties, which may result from its use. No license is granted by 46 * implication, estoppel or otherwise under any patent or other rights of the 47 * SD Group, SD-3C LLC, the SD Card Association or any third party. Nothing 48 * herein shall be construed as an obligation by the SD Group, the SD-3C LLC 49 * or the SD Card Association to disclose or distribute any technical 50 * information, know-how or other confidential information to any third party. 51 * 52 * $FreeBSD: src/sys/dev/mmc/mmcreg.h,v 1.8 2009/02/03 04:28:45 imp Exp $ 53 */ 54 55 #ifndef BUS_MMC_MMCREG_H 56 #define BUS_MMC_MMCREG_H 57 58 /* 59 * This file contains the register definitions for the mmc and sd busses. 60 * They are taken from publicly available sources. 61 */ 62 63 struct mmc_data; 64 struct mmc_request; 65 66 struct mmc_command { 67 uint32_t opcode; 68 uint32_t arg; 69 uint32_t resp[4]; 70 uint32_t flags; /* Expected responses */ 71 #define MMC_RSP_PRESENT (1ul << 0) /* Response */ 72 #define MMC_RSP_136 (1ul << 1) /* 136 bit response */ 73 #define MMC_RSP_CRC (1ul << 2) /* Expect valid crc */ 74 #define MMC_RSP_BUSY (1ul << 3) /* Card may send busy */ 75 #define MMC_RSP_OPCODE (1ul << 4) /* Response include opcode */ 76 #define MMC_RSP_MASK 0x1ful 77 #define MMC_CMD_AC (0ul << 5) /* Addressed Command, no data */ 78 #define MMC_CMD_ADTC (1ul << 5) /* Addressed Data transfer cmd */ 79 #define MMC_CMD_BC (2ul << 5) /* Broadcast command, no response */ 80 #define MMC_CMD_BCR (3ul << 5) /* Broadcast command with response */ 81 #define MMC_CMD_MASK (3ul << 5) 82 83 /* Possible response types defined in the standard: */ 84 #define MMC_RSP_NONE (0) 85 #define MMC_RSP_R1 (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE) 86 #define MMC_RSP_R1B (MMC_RSP_PRESENT | MMC_RSP_CRC | MMC_RSP_OPCODE | MMC_RSP_BUSY) 87 #define MMC_RSP_R2 (MMC_RSP_PRESENT | MMC_RSP_136 | MMC_RSP_CRC) 88 #define MMC_RSP_R3 (MMC_RSP_PRESENT) 89 #define MMC_RSP_R6 (MMC_RSP_PRESENT | MMC_RSP_CRC) 90 #define MMC_RSP_R7 (MMC_RSP_PRESENT | MMC_RSP_CRC) 91 #define MMC_RSP(x) ((x) & MMC_RSP_MASK) 92 uint32_t retries; 93 uint32_t error; 94 #define MMC_ERR_NONE 0 95 #define MMC_ERR_TIMEOUT 1 96 #define MMC_ERR_BADCRC 2 97 #define MMC_ERR_FIFO 3 98 #define MMC_ERR_FAILED 4 99 #define MMC_ERR_INVALID 5 100 #define MMC_ERR_NO_MEMORY 6 101 #define MMC_ERR_MAX 6 102 struct mmc_data *data; /* Data segment with cmd */ 103 struct mmc_request *mrq; /* backpointer to request */ 104 }; 105 106 /* 107 * R1 responses 108 * 109 * Types (per SD 2.0 standard) 110 * e : error bit 111 * s : status bit 112 * r : detected and set for the actual command response 113 * x : Detected and set during command execution. The host can get 114 * the status by issuing a command with R1 response. 115 * 116 * Clear Condition (per SD 2.0 standard) 117 * a : according to the card current state. 118 * b : always related to the previous command. reception of a valid 119 * command will clear it (with a delay of one command). 120 * c : clear by read 121 */ 122 #define R1_OUT_OF_RANGE (1u << 31) /* erx, c */ 123 #define R1_ADDRESS_ERROR (1u << 30) /* erx, c */ 124 #define R1_BLOCK_LEN_ERROR (1u << 29) /* erx, c */ 125 #define R1_ERASE_SEQ_ERROR (1u << 28) /* er, c */ 126 #define R1_ERASE_PARAM (1u << 27) /* erx, c */ 127 #define R1_WP_VIOLATION (1u << 26) /* erx, c */ 128 #define R1_CARD_IS_LOCKED (1u << 25) /* sx, a */ 129 #define R1_LOCK_UNLOCK_FAILED (1u << 24) /* erx, c */ 130 #define R1_COM_CRC_ERROR (1u << 23) /* er, b */ 131 #define R1_ILLEGAL_COMMAND (1u << 22) /* er, b */ 132 #define R1_CARD_ECC_FAILED (1u << 21) /* erx, c */ 133 #define R1_CC_ERROR (1u << 20) /* erx, c */ 134 #define R1_ERROR (1u << 19) /* erx, c */ 135 #define R1_CSD_OVERWRITE (1u << 16) /* erx, c */ 136 #define R1_WP_ERASE_SKIP (1u << 15) /* erx, c */ 137 #define R1_CARD_ECC_DISABLED (1u << 14) /* sx, a */ 138 #define R1_ERASE_RESET (1u << 13) /* sr, c */ 139 #define R1_CURRENT_STATE_MASK (0xfu << 9) /* sx, b */ 140 #define R1_READY_FOR_DATA (1u << 8) /* sx, a */ 141 #define R1_SWITCH_ERROR (1u << 7) /* sx, c */ 142 #define R1_APP_CMD (1u << 5) /* sr, c */ 143 #define R1_AKE_SEQ_ERROR (1u << 3) /* er, c */ 144 #define R1_STATUS(x) ((x) & 0xFFFFE000) 145 #define R1_CURRENT_STATE(x) (((x) & R1_CURRENT_STATE_MASK) >> 9) 146 #define R1_STATE_IDLE 0 147 #define R1_STATE_READY 1 148 #define R1_STATE_IDENT 2 149 #define R1_STATE_STBY 3 150 #define R1_STATE_TRAN 4 151 #define R1_STATE_DATA 5 152 #define R1_STATE_RCV 6 153 #define R1_STATE_PRG 7 154 #define R1_STATE_DIS 8 155 156 struct mmc_data { 157 size_t len; /* size of the data */ 158 size_t xfer_len; 159 void *data; /* data buffer */ 160 uint32_t flags; 161 #define MMC_DATA_WRITE (1UL << 0) 162 #define MMC_DATA_READ (1UL << 1) 163 #define MMC_DATA_STREAM (1UL << 2) 164 #define MMC_DATA_MULTI (1UL << 3) 165 struct mmc_request *mrq; 166 }; 167 168 struct mmc_request { 169 struct mmc_command *cmd; 170 struct mmc_command *stop; 171 void (*done)(struct mmc_request *); /* Completion function */ 172 void *done_data; /* requestor set data */ 173 uint32_t flags; 174 #define MMC_REQ_DONE 1 175 }; 176 177 /* Command definitions */ 178 179 /* Class 0 and 1: Basic commands & read stream commands */ 180 #define MMC_GO_IDLE_STATE 0 181 #define MMC_SEND_OP_COND 1 182 #define MMC_ALL_SEND_CID 2 183 #define MMC_SET_RELATIVE_ADDR 3 184 #define SD_SEND_RELATIVE_ADDR 3 185 #define MMC_SET_DSR 4 186 #define MMC_SLEEP_AWAKE 5 187 #define MMC_SWITCH_FUNC 6 188 #define MMC_SWITCH_FUNC_CMDS 0 189 #define MMC_SWITCH_FUNC_SET 1 190 #define MMC_SWITCH_FUNC_CLR 2 191 #define MMC_SWITCH_FUNC_WR 3 192 #define MMC_SELECT_CARD 7 193 #define MMC_DESELECT_CARD 7 194 #define MMC_SEND_EXT_CSD 8 195 #define SD_SEND_IF_COND 8 196 #define MMC_SEND_CSD 9 197 #define MMC_SEND_CID 10 198 #define MMC_READ_DAT_UNTIL_STOP 11 199 #define MMC_STOP_TRANSMISSION 12 200 #define MMC_SEND_STATUS 13 201 #define MMC_BUSTEST_R 14 202 #define MMC_GO_INACTIVE_STATE 15 203 #define MMC_BUSTEST_W 19 204 205 /* Class 2: Block oriented read commands */ 206 #define MMC_SET_BLOCKLEN 16 207 #define MMC_READ_SINGLE_BLOCK 17 208 #define MMC_READ_MULTIPLE_BLOCK 18 209 #define MMC_SEND_TUNING_BLOCK 19 210 #define MMC_SEND_TUNING_BLOCK_HS200 21 211 212 /* Class 3: Stream write commands */ 213 #define MMC_WRITE_DAT_UNTIL_STOP 20 214 /* reserved: 22 */ 215 216 /* Class 4: Block oriented write commands */ 217 #define MMC_SET_BLOCK_COUNT 23 218 #define MMC_WRITE_BLOCK 24 219 #define MMC_WRITE_MULTIPLE_BLOCK 25 220 #define MMC_PROGARM_CID 26 221 #define MMC_PROGRAM_CSD 27 222 223 /* Class 6: Block oriented write protection commands */ 224 #define MMC_SET_WRITE_PROT 28 225 #define MMC_CLR_WRITE_PROT 29 226 #define MMC_SEND_WRITE_PROT 30 227 /* reserved: 31 */ 228 229 /* Class 5: Erase commands */ 230 #define SD_ERASE_WR_BLK_START 32 231 #define SD_ERASE_WR_BLK_END 33 232 /* 34 -- reserved old command */ 233 #define MMC_ERASE_GROUP_START 35 234 #define MMC_ERASE_GROUP_END 36 235 /* 37 -- reserved old command */ 236 #define MMC_ERASE 38 237 238 /* Class 9: I/O mode commands */ 239 #define MMC_FAST_IO 39 240 #define MMC_GO_IRQ_STATE 40 241 /* reserved: 41 */ 242 243 /* Class 7: Lock card */ 244 #define MMC_LOCK_UNLOCK 42 245 /* reserved: 43 */ 246 /* reserved: 44 */ 247 /* reserved: 45 */ 248 /* reserved: 46 */ 249 /* reserved: 47 */ 250 /* reserved: 48 */ 251 /* reserved: 49 */ 252 /* reserved: 50 */ 253 /* reserved: 51 */ 254 /* reserved: 54 */ 255 256 /* Class 8: Application specific commands */ 257 #define MMC_APP_CMD 55 258 #define MMC_GEN_CMD 56 259 /* reserved: 57 */ 260 /* reserved: 58 */ 261 /* reserved: 59 */ 262 /* reserved for mfg: 60 */ 263 /* reserved for mfg: 61 */ 264 /* reserved for mfg: 62 */ 265 /* reserved for mfg: 63 */ 266 267 /* Class 9: I/O cards (sd) */ 268 #define SD_IO_RW_DIRECT 52 269 #define SD_IO_RW_EXTENDED 53 270 271 /* Class 10: Switch function commands */ 272 #define SD_SWITCH_FUNC 6 273 /* reserved: 34 */ 274 /* reserved: 35 */ 275 /* reserved: 36 */ 276 /* reserved: 37 */ 277 /* reserved: 50 */ 278 /* reserved: 57 */ 279 280 /* Application specific commands for SD */ 281 #define ACMD_SET_BUS_WIDTH 6 282 #define ACMD_SD_STATUS 13 283 #define ACMD_SEND_NUM_WR_BLOCKS 22 284 #define ACMD_SET_WR_BLK_ERASE_COUNT 23 285 #define ACMD_SD_SEND_OP_COND 41 286 #define ACMD_SET_CLR_CARD_DETECT 42 287 #define ACMD_SEND_SCR 51 288 289 /* 290 * EXT_CSD fields 291 */ 292 #define EXT_CSD_EXT_PART_ATTR 52 /* R/W, 2 bytes */ 293 #define EXT_CSD_ENH_START_ADDR 136 /* R/W, 4 bytes */ 294 #define EXT_CSD_ENH_SIZE_MULT 140 /* R/W, 3 bytes */ 295 #define EXT_CSD_GP_SIZE_MULT 143 /* R/W, 12 bytes */ 296 #define EXT_CSD_PART_SET 155 /* R/W */ 297 #define EXT_CSD_PART_ATTR 156 /* R/W */ 298 #define EXT_CSD_PART_SUPPORT 160 /* RO */ 299 #define EXT_CSD_RPMB_MULT 168 /* RO */ 300 #define EXT_CSD_BOOT_WP_STATUS 174 /* RO */ 301 #define EXT_CSD_ERASE_GRP_DEF 175 /* R/W */ 302 #define EXT_CSD_PART_CONFIG 179 /* R/W */ 303 #define EXT_CSD_BUS_WIDTH 183 /* R/W */ 304 #define EXT_CSD_STROBE_SUPPORT 184 /* RO */ 305 #define EXT_CSD_HS_TIMING 185 /* R/W */ 306 #define EXT_CSD_POWER_CLASS 187 /* R/W */ 307 #define EXT_CSD_CARD_TYPE 196 /* RO */ 308 #define EXT_CSD_DRIVER_STRENGTH 197 /* RO */ 309 #define EXT_CSD_REV 192 /* RO */ 310 #define EXT_CSD_PART_SWITCH_TO 199 /* RO */ 311 #define EXT_CSD_PWR_CL_52_195 200 /* RO */ 312 #define EXT_CSD_PWR_CL_26_195 201 /* RO */ 313 #define EXT_CSD_PWR_CL_52_360 202 /* RO */ 314 #define EXT_CSD_PWR_CL_26_360 203 /* RO */ 315 #define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */ 316 #define EXT_CSD_HC_WP_GRP_SIZE 221 /* RO */ 317 #define EXT_CSD_ERASE_TO_MULT 223 /* RO */ 318 #define EXT_CSD_ERASE_GRP_SIZE 224 /* RO */ 319 #define EXT_CSD_BOOT_SIZE_MULT 226 /* RO */ 320 #define EXT_CSD_PWR_CL_200_195 236 /* RO */ 321 #define EXT_CSD_PWR_CL_200_360 237 /* RO */ 322 #define EXT_CSD_PWR_CL_52_195_DDR 238 /* RO */ 323 #define EXT_CSD_PWR_CL_52_360_DDR 239 /* RO */ 324 #define EXT_CSD_GEN_CMD6_TIME 248 /* RO */ 325 #define EXT_CSD_PWR_CL_200_360_DDR 253 /* RO */ 326 327 /* 328 * EXT_CSD field definitions 329 */ 330 #define EXT_CSD_EXT_PART_ATTR_DEFAULT 0x0 331 #define EXT_CSD_EXT_PART_ATTR_SYSTEMCODE 0x1 332 #define EXT_CSD_EXT_PART_ATTR_NPERSISTENT 0x2 333 334 #define EXT_CSD_PART_SET_COMPLETED 0x01 335 336 #define EXT_CSD_PART_ATTR_ENH_USR 0x01 337 #define EXT_CSD_PART_ATTR_ENH_GP0 0x02 338 #define EXT_CSD_PART_ATTR_ENH_GP1 0x04 339 #define EXT_CSD_PART_ATTR_ENH_GP2 0x08 340 #define EXT_CSD_PART_ATTR_ENH_GP3 0x10 341 #define EXT_CSD_PART_ATTR_ENH_MASK 0x1f 342 343 #define EXT_CSD_PART_SUPPORT_EN 0x01 344 #define EXT_CSD_PART_SUPPORT_ENH_ATTR_EN 0x02 345 #define EXT_CSD_PART_SUPPORT_EXT_ATTR_EN 0x04 346 347 #define EXT_CSD_BOOT_WP_STATUS_BOOT0_PWR 0x01 348 #define EXT_CSD_BOOT_WP_STATUS_BOOT0_PERM 0x02 349 #define EXT_CSD_BOOT_WP_STATUS_BOOT0_MASK 0x03 350 #define EXT_CSD_BOOT_WP_STATUS_BOOT1_PWR 0x04 351 #define EXT_CSD_BOOT_WP_STATUS_BOOT1_PERM 0x08 352 #define EXT_CSD_BOOT_WP_STATUS_BOOT1_MASK 0x0c 353 354 #define EXT_CSD_ERASE_GRP_DEF_EN 0x01 355 356 #define EXT_CSD_PART_CONFIG_ACC_DEFAULT 0x00 357 #define EXT_CSD_PART_CONFIG_ACC_BOOT0 0x01 358 #define EXT_CSD_PART_CONFIG_ACC_BOOT1 0x02 359 #define EXT_CSD_PART_CONFIG_ACC_RPMB 0x03 360 #define EXT_CSD_PART_CONFIG_ACC_GP0 0x04 361 #define EXT_CSD_PART_CONFIG_ACC_GP1 0x05 362 #define EXT_CSD_PART_CONFIG_ACC_GP2 0x06 363 #define EXT_CSD_PART_CONFIG_ACC_GP3 0x07 364 #define EXT_CSD_PART_CONFIG_ACC_MASK 0x07 365 #define EXT_CSD_PART_CONFIG_BOOT0 0x08 366 #define EXT_CSD_PART_CONFIG_BOOT1 0x10 367 #define EXT_CSD_PART_CONFIG_BOOT_USR 0x38 368 #define EXT_CSD_PART_CONFIG_BOOT_MASK 0x38 369 370 #define EXT_CSD_CMD_SET_NORMAL 1 371 #define EXT_CSD_CMD_SET_SECURE 2 372 #define EXT_CSD_CMD_SET_CPSECURE 4 373 374 #define EXT_CSD_HS_TIMING_BC 0 375 #define EXT_CSD_HS_TIMING_HS 1 376 #define EXT_CSD_HS_TIMING_DDR200 2 377 #define EXT_CSD_HS_TIMING_DDR400 3 378 #define EXT_CSD_HS_TIMING_DRV_STR_SHIFT 4 379 380 #define EXT_CSD_POWER_CLASS_8BIT_MASK 0xf0 381 #define EXT_CSD_POWER_CLASS_8BIT_SHIFT 4 382 #define EXT_CSD_POWER_CLASS_4BIT_MASK 0x0f 383 #define EXT_CSD_POWER_CLASS_4BIT_SHIFT 0 384 385 #define EXT_CSD_CARD_TYPE_HS_26 0x0001 386 #define EXT_CSD_CARD_TYPE_HS_52 0x0002 387 #define EXT_CSD_CARD_TYPE_DDR_52_1_8V 0x0004 388 #define EXT_CSD_CARD_TYPE_DDR_52_1_2V 0x0008 389 #define EXT_CSD_CARD_TYPE_HS200_1_8V 0x0010 390 #define EXT_CSD_CARD_TYPE_HS200_1_2V 0x0020 391 #define EXT_CSD_CARD_TYPE_HS400_1_8V 0x0040 392 #define EXT_CSD_CARD_TYPE_HS400_1_2V 0x0080 393 #define EXT_CSD_CARD_TYPE_HS400ES 0x0100 394 395 #define EXT_CSD_BUS_WIDTH_1 0 396 #define EXT_CSD_BUS_WIDTH_4 1 397 #define EXT_CSD_BUS_WIDTH_8 2 398 #define EXT_CSD_BUS_WIDTH_4_DDR 5 399 #define EXT_CSD_BUS_WIDTH_8_DDR 6 400 #define EXT_CSD_BUS_WIDTH_ES 0x80 401 402 #define MMC_TYPE_HS_26_MAX 26000000 403 #define MMC_TYPE_HS_52_MAX 52000000 404 #define MMC_TYPE_DDR52_MAX 52000000 405 #define MMC_TYPE_HS200_HS400ES_MAX 200000000 406 407 /* 408 * SD bus widths 409 */ 410 #define SD_BUS_WIDTH_1 0 411 #define SD_BUS_WIDTH_4 2 412 413 /* 414 * SD Switch 415 */ 416 #define SD_SWITCH_MODE_CHECK 0 417 #define SD_SWITCH_MODE_SET 1 418 #define SD_SWITCH_GROUP1 0 419 #define SD_SWITCH_NORMAL_MODE 0 420 #define SD_SWITCH_HS_MODE 1 421 #define SD_SWITCH_SDR50_MODE 2 422 #define SD_SWITCH_SDR104_MODE 3 423 #define SD_SWITCH_DDR50 4 424 #define SD_SWITCH_NOCHANGE 0xF 425 426 #define SD_CLR_CARD_DETECT 0 427 #define SD_SET_CARD_DETECT 1 428 429 #define SD_HS_MAX 50000000 430 #define SD_DDR50_MAX 50000000 431 #define SD_SDR12_MAX 25000000 432 #define SD_SDR25_MAX 50000000 433 #define SD_SDR50_MAX 100000000 434 #define SD_SDR104_MAX 208000000 435 436 /* Specifications require 400 kHz max. during ID phase. */ 437 #define SD_MMC_CARD_ID_FREQUENCY 400000 438 439 /* OCR bits */ 440 441 /* 442 * in SD 2.0 spec, bits 8-14 are now marked reserved 443 * Low voltage in SD2.0 spec is bit 7, TBD voltage 444 * Low voltage in MMC 3.31 spec is bit 7, 1.65-1.95V 445 * Specs prior to MMC 3.31 defined bits 0-7 as voltages down to 1.5V. 446 * 3.31 redefined them to be reserved and also said that cards had to 447 * support the 2.7-3.6V and fixed the OCR to be 0xfff8000 for high voltage 448 * cards. MMC 4.0 says that a dual voltage card responds with 0xfff8080. 449 * Looks like the fine-grained control of the voltage tolerance ranges 450 * was abandoned. 451 * 452 * The MMC_OCR_CCS appears to be valid for only SD cards. 453 */ 454 #define MMC_OCR_VOLTAGE 0x3fffffffU /* Vdd Voltage mask */ 455 #define MMC_OCR_MIN_VOLTAGE_SHIFT 7 456 #define MMC_OCR_LOW_VOLTAGE (1u << 7) /* Low Voltage Range -- tbd */ 457 #define MMC_OCR_200_210 (1U << 8) /* Vdd voltage 2.00 ~ 2.10 */ 458 #define MMC_OCR_210_220 (1U << 9) /* Vdd voltage 2.10 ~ 2.20 */ 459 #define MMC_OCR_220_230 (1U << 10) /* Vdd voltage 2.20 ~ 2.30 */ 460 #define MMC_OCR_230_240 (1U << 11) /* Vdd voltage 2.30 ~ 2.40 */ 461 #define MMC_OCR_240_250 (1U << 12) /* Vdd voltage 2.40 ~ 2.50 */ 462 #define MMC_OCR_250_260 (1U << 13) /* Vdd voltage 2.50 ~ 2.60 */ 463 #define MMC_OCR_260_270 (1U << 14) /* Vdd voltage 2.60 ~ 2.70 */ 464 #define MMC_OCR_270_280 (1U << 15) /* Vdd voltage 2.70 ~ 2.80 */ 465 #define MMC_OCR_280_290 (1U << 16) /* Vdd voltage 2.80 ~ 2.90 */ 466 #define MMC_OCR_290_300 (1U << 17) /* Vdd voltage 2.90 ~ 3.00 */ 467 #define MMC_OCR_300_310 (1U << 18) /* Vdd voltage 3.00 ~ 3.10 */ 468 #define MMC_OCR_310_320 (1U << 19) /* Vdd voltage 3.10 ~ 3.20 */ 469 #define MMC_OCR_320_330 (1U << 20) /* Vdd voltage 3.20 ~ 3.30 */ 470 #define MMC_OCR_330_340 (1U << 21) /* Vdd voltage 3.30 ~ 3.40 */ 471 #define MMC_OCR_340_350 (1U << 22) /* Vdd voltage 3.40 ~ 3.50 */ 472 #define MMC_OCR_350_360 (1U << 23) /* Vdd voltage 3.50 ~ 3.60 */ 473 #define MMC_OCR_MAX_VOLTAGE_SHIFT 23 474 #define MMC_OCR_S18R (1U << 24) /* Switching to 1.8 V requested (SD) */ 475 #define MMC_OCR_S18A MMC_OCR_S18R /* Switching to 1.8 V accepted (SD) */ 476 #define MMC_OCR_XPC (1U << 28) /* SDXC Power Control */ 477 #define MMC_OCR_ACCESS_MODE_BYTE (0U << 29) /* Access Mode Byte (MMC) */ 478 #define MMC_OCR_ACCESS_MODE_SECT (1U << 29) /* Access Mode Sector (MMC) */ 479 #define MMC_OCR_ACCESS_MODE_MASK (3U << 29) 480 #define MMC_OCR_CCS (1u << 30) /* Card Capacity status (SD vs SDHC) */ 481 #define MMC_OCR_CARD_BUSY (1U << 31) /* Card Power up status */ 482 483 /* CSD -- decoded structure */ 484 struct mmc_cid { 485 uint32_t mid; 486 char pnm[8]; 487 uint32_t psn; 488 uint16_t oid; 489 uint16_t mdt_year; 490 uint8_t mdt_month; 491 uint8_t prv; 492 uint8_t fwrev; 493 }; 494 495 struct mmc_csd 496 { 497 uint8_t csd_structure; 498 uint8_t spec_vers; 499 uint16_t ccc; 500 uint16_t tacc; 501 uint32_t nsac; 502 uint32_t r2w_factor; 503 uint32_t tran_speed; 504 uint32_t read_bl_len; 505 uint32_t write_bl_len; 506 uint32_t vdd_r_curr_min; 507 uint32_t vdd_r_curr_max; 508 uint32_t vdd_w_curr_min; 509 uint32_t vdd_w_curr_max; 510 uint32_t wp_grp_size; 511 uint32_t erase_sector; 512 uint64_t capacity; 513 unsigned int read_bl_partial:1, 514 read_blk_misalign:1, 515 write_bl_partial:1, 516 write_blk_misalign:1, 517 dsr_imp:1, 518 erase_blk_en:1, 519 wp_grp_enable:1; 520 }; 521 522 struct mmc_scr 523 { 524 unsigned char sda_vsn; 525 unsigned char bus_widths; 526 #define SD_SCR_BUS_WIDTH_1 (1<<0) 527 #define SD_SCR_BUS_WIDTH_4 (1<<2) 528 }; 529 530 struct mmc_sd_status 531 { 532 uint8_t bus_width; 533 uint8_t secured_mode; 534 uint16_t card_type; 535 uint16_t prot_area; 536 uint8_t speed_class; 537 uint8_t perf_move; 538 uint8_t au_size; 539 uint16_t erase_size; 540 uint8_t erase_timeout; 541 uint8_t erase_offset; 542 }; 543 544 /* 545 * Various MMC/SD constants 546 */ 547 #define MMC_BOOT_RPMB_BLOCK_SIZE (128 * 1024) 548 549 #define MMC_EXTCSD_SIZE 512 550 551 #define MMC_PART_GP_MAX 4 552 #define MMC_PART_MAX 8 553 554 /* 555 * Older versions of the MMC standard had a variable sector size. However, 556 * I've been able to find no old MMC or SD cards that have a non 512 557 * byte sector size anywhere, so we assume that such cards are very rare 558 * and only note their existance in passing here... 559 */ 560 #define MMC_SECTOR_SIZE 512 561 562 #endif /* BUS_MMCREG_H */ 563