1 /* $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $ */ 2 /* $FreeBSD$ */ 3 4 /*- 5 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in the 15 * documentation and/or other materials provided with the distribution. 16 * 17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 27 * SUCH DAMAGE. 28 */ 29 30 /*- 31 * Copyright (c) 1999 The NetBSD Foundation, Inc. 32 * All rights reserved. 33 * 34 * This code is derived from software contributed to The NetBSD Foundation 35 * by Lennart Augustsson (lennart@augustsson.net) at 36 * Carlstedt Research & Technology. 37 * 38 * Redistribution and use in source and binary forms, with or without 39 * modification, are permitted provided that the following conditions 40 * are met: 41 * 1. Redistributions of source code must retain the above copyright 42 * notice, this list of conditions and the following disclaimer. 43 * 2. Redistributions in binary form must reproduce the above copyright 44 * notice, this list of conditions and the following disclaimer in the 45 * documentation and/or other materials provided with the distribution. 46 * 47 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 48 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 49 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 50 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 51 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 52 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 53 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 54 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 55 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 56 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 57 * POSSIBILITY OF SUCH DAMAGE. 58 */ 59 60 #ifndef _USB_SERIAL_H_ 61 #define _USB_SERIAL_H_ 62 63 #include <sys/tty.h> 64 #include <sys/fcntl.h> 65 #include <sys/sysctl.h> 66 #include <sys/timepps.h> 67 68 /* We should seriously clean this up! */ 69 #define SET(t, f) (t) |= (f) 70 #define CLR(t, f) (t) &= ~((unsigned)(f)) 71 #define ISSET(t, f) ((t) & (f)) 72 73 /* Module interface related macros */ 74 #define UCOM_MODVER 1 75 76 #define UCOM_MINVER 1 77 #define UCOM_PREFVER UCOM_MODVER 78 #define UCOM_MAXVER 1 79 #define UCOM_JITTERBUF_SIZE 128 /* bytes */ 80 81 struct usb_device; 82 struct ucom_softc; 83 struct usb_device_request; 84 struct thread; 85 86 /* 87 * NOTE: There is no guarantee that "ucom_cfg_close()" will 88 * be called after "ucom_cfg_open()" if the device is detached 89 * while it is open! 90 */ 91 struct ucom_callback { 92 void (*ucom_cfg_get_status) (struct ucom_softc *, uint8_t *plsr, uint8_t *pmsr); 93 void (*ucom_cfg_set_dtr) (struct ucom_softc *, uint8_t); 94 void (*ucom_cfg_set_rts) (struct ucom_softc *, uint8_t); 95 void (*ucom_cfg_set_break) (struct ucom_softc *, uint8_t); 96 void (*ucom_cfg_set_ring) (struct ucom_softc *, uint8_t); 97 void (*ucom_cfg_param) (struct ucom_softc *, struct termios *); 98 void (*ucom_cfg_open) (struct ucom_softc *); 99 void (*ucom_cfg_close) (struct ucom_softc *); 100 int (*ucom_pre_open) (struct ucom_softc *); 101 int (*ucom_pre_param) (struct ucom_softc *, struct termios *); 102 int (*ucom_ioctl) (struct ucom_softc *, uint32_t, caddr_t, int, struct thread *); 103 void (*ucom_start_read) (struct ucom_softc *); 104 void (*ucom_stop_read) (struct ucom_softc *); 105 void (*ucom_start_write) (struct ucom_softc *); 106 void (*ucom_stop_write) (struct ucom_softc *); 107 void (*ucom_tty_name) (struct ucom_softc *, char *pbuf, uint16_t buflen, uint16_t unit, uint16_t subunit); 108 void (*ucom_poll) (struct ucom_softc *); 109 void (*ucom_free) (struct ucom_softc *); 110 }; 111 112 /* Line status register */ 113 #define ULSR_RCV_FIFO 0x80 114 #define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */ 115 #define ULSR_TXRDY 0x20 /* Transmitter buffer empty */ 116 #define ULSR_BI 0x10 /* Break detected */ 117 #define ULSR_FE 0x08 /* Framing error: bad stop bit */ 118 #define ULSR_PE 0x04 /* Parity error */ 119 #define ULSR_OE 0x02 /* Overrun, lost incoming byte */ 120 #define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */ 121 #define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */ 122 123 struct ucom_cfg_task { 124 struct usb_proc_msg hdr; 125 struct ucom_softc *sc; 126 }; 127 128 struct ucom_param_task { 129 struct usb_proc_msg hdr; 130 struct ucom_softc *sc; 131 struct termios termios_copy; 132 }; 133 134 struct ucom_super_softc { 135 struct usb_process sc_tq; 136 int sc_unit; 137 int sc_subunits; 138 int sc_refs; 139 int sc_flag; /* see UCOM_FLAG_XXX */ 140 struct sysctl_oid *sc_sysctl_ttyname; 141 struct sysctl_oid *sc_sysctl_ttyports; 142 char sc_ttyname[16]; 143 }; 144 145 struct ucom_softc { 146 /* 147 * NOTE: To avoid losing level change information we use two 148 * tasks instead of one for all commands. 149 * 150 * Level changes are transitions like: 151 * 152 * ON->OFF 153 * OFF->ON 154 * OPEN->CLOSE 155 * CLOSE->OPEN 156 */ 157 struct ucom_cfg_task sc_start_task[2]; 158 struct ucom_cfg_task sc_open_task[2]; 159 struct ucom_cfg_task sc_close_task[2]; 160 struct ucom_cfg_task sc_line_state_task[2]; 161 struct ucom_cfg_task sc_status_task[2]; 162 struct ucom_param_task sc_param_task[2]; 163 /* pulse capturing support, PPS */ 164 struct pps_state sc_pps; 165 /* Used to set "UCOM_FLAG_GP_DATA" flag: */ 166 struct usb_proc_msg *sc_last_start_xfer; 167 const struct ucom_callback *sc_callback; 168 struct ucom_super_softc *sc_super; 169 struct tty *sc_tty; 170 struct dev *sc_dev; 171 cdev_t sc_cdev; /* this is the /dev/ttyUX */ 172 cdev_t sc_cdev_init; /* /dev/ttyUX.init */ 173 cdev_t sc_cdev_lock; /* /dev/ttyUX.lock */ 174 cdev_t sc_cdev2; /* /dev/cuaUX */ 175 cdev_t sc_cdev2_init; /* /dev/cuaUX.init */ 176 cdev_t sc_cdev2_lock; /* /dev/cuaUX.lock */ 177 struct termios sc_it_in; /* Initial state in */ 178 struct termios sc_it_out; /* Initial state out */ 179 struct termios sc_lt_in; /* Lockstate in */ 180 struct termios sc_lt_out; /* Lockstate out */ 181 struct lock *sc_lock; 182 void *sc_parent; 183 int sc_subunit; 184 uint16_t sc_jitterbuf_in; 185 uint16_t sc_jitterbuf_out; 186 uint16_t sc_portno; 187 uint16_t sc_flag; 188 #define UCOM_FLAG_RTS_IFLOW 0x01 /* use RTS input flow control */ 189 #define UCOM_FLAG_GONE 0x02 /* the device is gone */ 190 #define UCOM_FLAG_ATTACHED 0x04 /* set if attached */ 191 #define UCOM_FLAG_GP_DATA 0x08 /* set if get and put data is possible */ 192 #define UCOM_FLAG_LL_READY 0x20 /* set if low layer is ready */ 193 #define UCOM_FLAG_HL_READY 0x40 /* set if high layer is ready */ 194 #define UCOM_FLAG_CONSOLE 0x80 /* set if device is a console */ 195 #define UCOM_FLAG_WAIT_REFS 0x0100 /* set if we must wait for refs */ 196 #define UCOM_FLAG_FREE_UNIT 0x0200 /* set if we must free the unit */ 197 #define UCOM_FLAG_INWAKEUP 0x0400 /* set if we are in the tsw_inwakeup callback */ 198 uint8_t sc_lsr; 199 uint8_t sc_msr; 200 uint8_t sc_mcr; 201 /* programmed line state bits */ 202 uint8_t sc_pls_set; /* set bits */ 203 uint8_t sc_pls_clr; /* cleared bits */ 204 uint8_t sc_pls_curr; /* last state */ 205 #define UCOM_LS_DTR 0x01 206 #define UCOM_LS_RTS 0x02 207 #define UCOM_LS_BREAK 0x04 208 #define UCOM_LS_RING 0x08 209 u_char hotchar; 210 uint8_t sc_jitterbuf[UCOM_JITTERBUF_SIZE]; 211 }; 212 213 #define UCOM_MTX_ASSERT(sc, what) KKASSERT(lockowned((sc)->sc_lock)) 214 #define UCOM_MTX_LOCK(sc) lockmgr((sc)->sc_lock, LK_EXCLUSIVE) 215 #define UCOM_MTX_UNLOCK(sc) lockmgr((sc)->sc_lock, LK_RELEASE) 216 #define UCOM_UNLOAD_DRAIN(x) \ 217 SYSUNINIT(var, SI_SUB_KLD - 3, SI_ORDER_ANY, ucom_drain_all, 0) 218 219 #define ucom_cfg_do_request(udev,com,req,ptr,flags,timo) \ 220 usbd_do_request_proc(udev,&(com)->sc_super->sc_tq,req,ptr,flags,NULL,timo) 221 222 int ucom_attach(struct ucom_super_softc *, 223 struct ucom_softc *, int, void *, 224 const struct ucom_callback *callback, struct lock *); 225 void ucom_detach(struct ucom_super_softc *, struct ucom_softc *); 226 void ucom_set_pnpinfo_usb(struct ucom_super_softc *, device_t); 227 void ucom_status_change(struct ucom_softc *); 228 uint8_t ucom_get_data(struct ucom_softc *, struct usb_page_cache *, 229 uint32_t, uint32_t, uint32_t *); 230 void ucom_put_data(struct ucom_softc *, struct usb_page_cache *, 231 uint32_t, uint32_t); 232 uint8_t ucom_cfg_is_gone(struct ucom_softc *); 233 void ucom_drain(struct ucom_super_softc *); 234 void ucom_drain_all(void *); 235 void ucom_ref(struct ucom_super_softc *); 236 int ucom_unref(struct ucom_super_softc *); 237 #endif /* _USB_SERIAL_H_ */ 238