xref: /dragonfly/sys/bus/u4b/usb_error.c (revision f9993810)
1 /* $FreeBSD: head/sys/dev/usb/usb_error.c 246122 2013-01-30 15:26:04Z hselasky $ */
2 /*-
3  * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26 
27 #include <sys/stdint.h>
28 #include <sys/param.h>
29 #include <sys/queue.h>
30 #include <sys/types.h>
31 #include <sys/systm.h>
32 #include <sys/kernel.h>
33 #include <sys/bus.h>
34 #include <sys/module.h>
35 #include <sys/lock.h>
36 #include <sys/condvar.h>
37 #include <sys/sysctl.h>
38 #include <sys/unistd.h>
39 #include <sys/callout.h>
40 #include <sys/malloc.h>
41 #include <sys/caps.h>
42 
43 #include <bus/u4b/usb.h>
44 #include <bus/u4b/usbdi.h>
45 
46 static const char* usb_errstr_table[USB_ERR_MAX] = {
47 	[USB_ERR_NORMAL_COMPLETION]	= "USB_ERR_NORMAL_COMPLETION",
48 	[USB_ERR_PENDING_REQUESTS]	= "USB_ERR_PENDING_REQUESTS",
49 	[USB_ERR_NOT_STARTED]		= "USB_ERR_NOT_STARTED",
50 	[USB_ERR_INVAL]			= "USB_ERR_INVAL",
51 	[USB_ERR_NOMEM]			= "USB_ERR_NOMEM",
52 	[USB_ERR_CANCELLED]		= "USB_ERR_CANCELLED",
53 	[USB_ERR_BAD_ADDRESS]		= "USB_ERR_BAD_ADDRESS",
54 	[USB_ERR_BAD_BUFSIZE]		= "USB_ERR_BAD_BUFSIZE",
55 	[USB_ERR_BAD_FLAG]		= "USB_ERR_BAD_FLAG",
56 	[USB_ERR_NO_CALLBACK]		= "USB_ERR_NO_CALLBACK",
57 	[USB_ERR_IN_USE]		= "USB_ERR_IN_USE",
58 	[USB_ERR_NO_ADDR]		= "USB_ERR_NO_ADDR",
59 	[USB_ERR_NO_PIPE]		= "USB_ERR_NO_PIPE",
60 	[USB_ERR_ZERO_NFRAMES]		= "USB_ERR_ZERO_NFRAMES",
61 	[USB_ERR_ZERO_MAXP]		= "USB_ERR_ZERO_MAXP",
62 	[USB_ERR_SET_ADDR_FAILED]	= "USB_ERR_SET_ADDR_FAILED",
63 	[USB_ERR_NO_POWER]		= "USB_ERR_NO_POWER",
64 	[USB_ERR_TOO_DEEP]		= "USB_ERR_TOO_DEEP",
65 	[USB_ERR_IOERROR]		= "USB_ERR_IOERROR",
66 	[USB_ERR_NOT_CONFIGURED]	= "USB_ERR_NOT_CONFIGURED",
67 	[USB_ERR_TIMEOUT]		= "USB_ERR_TIMEOUT",
68 	[USB_ERR_SHORT_XFER]		= "USB_ERR_SHORT_XFER",
69 	[USB_ERR_STALLED]		= "USB_ERR_STALLED",
70 	[USB_ERR_INTERRUPTED]		= "USB_ERR_INTERRUPTED",
71 	[USB_ERR_DMA_LOAD_FAILED]	= "USB_ERR_DMA_LOAD_FAILED",
72 	[USB_ERR_BAD_CONTEXT]		= "USB_ERR_BAD_CONTEXT",
73 	[USB_ERR_NO_ROOT_HUB]		= "USB_ERR_NO_ROOT_HUB",
74 	[USB_ERR_NO_INTR_THREAD]	= "USB_ERR_NO_INTR_THREAD",
75 	[USB_ERR_NOT_LOCKED]		= "USB_ERR_NOT_LOCKED",
76 };
77 
78 /*------------------------------------------------------------------------*
79  *	usbd_errstr
80  *
81  * This function converts an USB error code into a string.
82  *------------------------------------------------------------------------*/
83 const char *
84 usbd_errstr(usb_error_t err)
85 {
86 	return (err < USB_ERR_MAX ? usb_errstr_table[err] : "USB_ERR_UNKNOWN");
87 }
88