1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. 4 * Copyright (c) 1998 Lennart Augustsson. All rights reserved. 5 * Copyright (c) 2008-2010 Hans Petter Selasky. All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * USB spec: http://www.usb.org/developers/docs/usbspec.zip 31 */ 32 33 #include <sys/stdint.h> 34 #include <sys/param.h> 35 #include <sys/queue.h> 36 #include <sys/types.h> 37 #include <sys/systm.h> 38 #include <sys/kernel.h> 39 #include <sys/bus.h> 40 #include <sys/module.h> 41 #include <sys/lock.h> 42 #include <sys/mutex.h> 43 #include <sys/condvar.h> 44 #include <sys/sysctl.h> 45 #include <sys/unistd.h> 46 #include <sys/callout.h> 47 #include <sys/malloc.h> 48 #include <sys/priv.h> 49 50 #include <bus/u4b/usb.h> 51 #include <bus/u4b/usb_ioctl.h> 52 #include <bus/u4b/usbdi.h> 53 #include <bus/u4b/usbdi_util.h> 54 55 #define USB_DEBUG_VAR uhub_debug 56 57 #include <bus/u4b/usb_core.h> 58 #include <bus/u4b/usb_process.h> 59 #include <bus/u4b/usb_device.h> 60 #include <bus/u4b/usb_request.h> 61 #include <bus/u4b/usb_debug.h> 62 #include <bus/u4b/usb_hub.h> 63 #include <bus/u4b/usb_util.h> 64 #include <bus/u4b/usb_busdma.h> 65 #include <bus/u4b/usb_transfer.h> 66 #include <bus/u4b/usb_dynamic.h> 67 68 #include <bus/u4b/usb_controller.h> 69 #include <bus/u4b/usb_bus.h> 70 71 #define UHUB_INTR_INTERVAL 250 /* ms */ 72 #define UHUB_N_TRANSFER 1 73 74 #ifdef USB_DEBUG 75 static int uhub_debug = 0; 76 77 static SYSCTL_NODE(_hw_usb, OID_AUTO, uhub, CTLFLAG_RW, 0, "USB HUB"); 78 SYSCTL_INT(_hw_usb_uhub, OID_AUTO, debug, CTLFLAG_RW, &uhub_debug, 0, 79 "Debug level"); 80 81 TUNABLE_INT("hw.usb.uhub.debug", &uhub_debug); 82 #endif 83 84 #if USB_HAVE_POWERD 85 static int usb_power_timeout = 30; /* seconds */ 86 87 SYSCTL_INT(_hw_usb, OID_AUTO, power_timeout, CTLFLAG_RW, 88 &usb_power_timeout, 0, "USB power timeout"); 89 #endif 90 91 struct uhub_current_state { 92 uint16_t port_change; 93 uint16_t port_status; 94 }; 95 96 struct uhub_softc { 97 struct uhub_current_state sc_st;/* current state */ 98 device_t sc_dev; /* base device */ 99 struct lock sc_lock; /* our mutex */ 100 struct usb_device *sc_udev; /* USB device */ 101 struct usb_xfer *sc_xfer[UHUB_N_TRANSFER]; /* interrupt xfer */ 102 uint8_t sc_flags; 103 #define UHUB_FLAG_DID_EXPLORE 0x01 104 char sc_name[32]; 105 }; 106 107 #define UHUB_PROTO(sc) ((sc)->sc_udev->ddesc.bDeviceProtocol) 108 #define UHUB_IS_HIGH_SPEED(sc) (UHUB_PROTO(sc) != UDPROTO_FSHUB) 109 #define UHUB_IS_SINGLE_TT(sc) (UHUB_PROTO(sc) == UDPROTO_HSHUBSTT) 110 #define UHUB_IS_SUPER_SPEED(sc) (UHUB_PROTO(sc) == UDPROTO_SSHUB) 111 112 /* prototypes for type checking: */ 113 114 static device_probe_t uhub_probe; 115 static device_attach_t uhub_attach; 116 static device_detach_t uhub_detach; 117 static device_suspend_t uhub_suspend; 118 static device_resume_t uhub_resume; 119 120 static bus_driver_added_t uhub_driver_added; 121 static bus_child_location_str_t uhub_child_location_string; 122 static bus_child_pnpinfo_str_t uhub_child_pnpinfo_string; 123 124 static usb_callback_t uhub_intr_callback; 125 126 static void usb_dev_resume_peer(struct usb_device *udev); 127 static void usb_dev_suspend_peer(struct usb_device *udev); 128 static uint8_t usb_peer_should_wakeup(struct usb_device *udev); 129 130 static const struct usb_config uhub_config[UHUB_N_TRANSFER] = { 131 132 [0] = { 133 .type = UE_INTERRUPT, 134 .endpoint = UE_ADDR_ANY, 135 .direction = UE_DIR_ANY, 136 .timeout = 0, 137 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,}, 138 .bufsize = 0, /* use wMaxPacketSize */ 139 .callback = &uhub_intr_callback, 140 .interval = UHUB_INTR_INTERVAL, 141 }, 142 }; 143 144 /* 145 * driver instance for "hub" connected to "usb" 146 * and "hub" connected to "hub" 147 */ 148 static devclass_t uhub_devclass; 149 150 static device_method_t uhub_methods[] = { 151 DEVMETHOD(device_probe, uhub_probe), 152 DEVMETHOD(device_attach, uhub_attach), 153 DEVMETHOD(device_detach, uhub_detach), 154 155 DEVMETHOD(device_suspend, uhub_suspend), 156 DEVMETHOD(device_resume, uhub_resume), 157 158 DEVMETHOD(bus_child_location_str, uhub_child_location_string), 159 DEVMETHOD(bus_child_pnpinfo_str, uhub_child_pnpinfo_string), 160 DEVMETHOD(bus_driver_added, uhub_driver_added), 161 {0, 0} 162 }; 163 164 static driver_t uhub_driver = { 165 .name = "uhub", 166 .methods = uhub_methods, 167 .size = sizeof(struct uhub_softc) 168 }; 169 170 DRIVER_MODULE(uhub, usbus, uhub_driver, uhub_devclass, 0, 0); 171 DRIVER_MODULE(uhub, uhub, uhub_driver, uhub_devclass, NULL, 0); 172 MODULE_VERSION(uhub, 1); 173 174 static void 175 uhub_intr_callback(struct usb_xfer *xfer, usb_error_t error) 176 { 177 struct uhub_softc *sc = usbd_xfer_softc(xfer); 178 179 switch (USB_GET_STATE(xfer)) { 180 case USB_ST_TRANSFERRED: 181 DPRINTFN(2, "\n"); 182 /* 183 * This is an indication that some port 184 * has changed status. Notify the bus 185 * event handler thread that we need 186 * to be explored again: 187 */ 188 usb_needs_explore(sc->sc_udev->bus, 0); 189 190 case USB_ST_SETUP: 191 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 192 usbd_transfer_submit(xfer); 193 break; 194 195 default: /* Error */ 196 if (xfer->error != USB_ERR_CANCELLED) { 197 /* 198 * Do a clear-stall. The "stall_pipe" flag 199 * will get cleared before next callback by 200 * the USB stack. 201 */ 202 usbd_xfer_set_stall(xfer); 203 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer)); 204 usbd_transfer_submit(xfer); 205 } 206 break; 207 } 208 } 209 210 /*------------------------------------------------------------------------* 211 * uhub_explore_sub - subroutine 212 * 213 * Return values: 214 * 0: Success 215 * Else: A control transaction failed 216 *------------------------------------------------------------------------*/ 217 static usb_error_t 218 uhub_explore_sub(struct uhub_softc *sc, struct usb_port *up) 219 { 220 struct usb_bus *bus; 221 struct usb_device *child; 222 uint8_t refcount; 223 usb_error_t err; 224 225 bus = sc->sc_udev->bus; 226 err = 0; 227 228 /* get driver added refcount from USB bus */ 229 refcount = bus->driver_added_refcount; 230 231 /* get device assosiated with the given port */ 232 child = usb_bus_port_get_device(bus, up); 233 if (child == NULL) { 234 /* nothing to do */ 235 goto done; 236 } 237 238 /* check if device should be re-enumerated */ 239 240 if (child->flags.usb_mode == USB_MODE_HOST) { 241 usbd_enum_lock(child); 242 if (child->re_enumerate_wait) { 243 err = usbd_set_config_index(child, 244 USB_UNCONFIG_INDEX); 245 if (err != 0) { 246 DPRINTF("Unconfigure failed: " 247 "%s: Ignored.\n", 248 usbd_errstr(err)); 249 } 250 err = usbd_req_re_enumerate(child, NULL); 251 if (err == 0) 252 err = usbd_set_config_index(child, 0); 253 if (err == 0) { 254 err = usb_probe_and_attach(child, 255 USB_IFACE_INDEX_ANY); 256 } 257 child->re_enumerate_wait = 0; 258 err = 0; 259 } 260 usbd_enum_unlock(child); 261 } 262 263 /* check if probe and attach should be done */ 264 265 if (child->driver_added_refcount != refcount) { 266 child->driver_added_refcount = refcount; 267 err = usb_probe_and_attach(child, 268 USB_IFACE_INDEX_ANY); 269 if (err) { 270 goto done; 271 } 272 } 273 /* start control transfer, if device mode */ 274 275 if (child->flags.usb_mode == USB_MODE_DEVICE) 276 usbd_ctrl_transfer_setup(child); 277 278 /* if a HUB becomes present, do a recursive HUB explore */ 279 280 if (child->hub) 281 err = (child->hub->explore) (child); 282 283 done: 284 return (err); 285 } 286 287 /*------------------------------------------------------------------------* 288 * uhub_read_port_status - factored out code 289 *------------------------------------------------------------------------*/ 290 static usb_error_t 291 uhub_read_port_status(struct uhub_softc *sc, uint8_t portno) 292 { 293 struct usb_port_status ps; 294 usb_error_t err; 295 296 err = usbd_req_get_port_status( 297 sc->sc_udev, NULL, &ps, portno); 298 299 /* update status regardless of error */ 300 301 sc->sc_st.port_status = UGETW(ps.wPortStatus); 302 sc->sc_st.port_change = UGETW(ps.wPortChange); 303 304 /* debugging print */ 305 306 DPRINTFN(4, "port %d, wPortStatus=0x%04x, " 307 "wPortChange=0x%04x, err=%s\n", 308 portno, sc->sc_st.port_status, 309 sc->sc_st.port_change, usbd_errstr(err)); 310 return (err); 311 } 312 313 /*------------------------------------------------------------------------* 314 * uhub_reattach_port 315 * 316 * Returns: 317 * 0: Success 318 * Else: A control transaction failed 319 *------------------------------------------------------------------------*/ 320 static usb_error_t 321 uhub_reattach_port(struct uhub_softc *sc, uint8_t portno) 322 { 323 struct usb_device *child; 324 struct usb_device *udev; 325 enum usb_dev_speed speed; 326 enum usb_hc_mode mode; 327 usb_error_t err; 328 uint16_t power_mask; 329 uint8_t timeout; 330 331 DPRINTF("reattaching port %d\n", portno); 332 333 err = 0; 334 timeout = 0; 335 udev = sc->sc_udev; 336 child = usb_bus_port_get_device(udev->bus, 337 udev->hub->ports + portno - 1); 338 339 repeat: 340 341 /* first clear the port connection change bit */ 342 343 err = usbd_req_clear_port_feature(udev, NULL, 344 portno, UHF_C_PORT_CONNECTION); 345 346 if (err) { 347 goto error; 348 } 349 /* check if there is a child */ 350 351 if (child != NULL) { 352 /* 353 * Free USB device and all subdevices, if any. 354 */ 355 usb_free_device(child, 0); 356 child = NULL; 357 } 358 /* get fresh status */ 359 360 err = uhub_read_port_status(sc, portno); 361 if (err) { 362 goto error; 363 } 364 /* check if nothing is connected to the port */ 365 366 if (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS)) { 367 goto error; 368 } 369 /* check if there is no power on the port and print a warning */ 370 371 switch (udev->speed) { 372 case USB_SPEED_HIGH: 373 case USB_SPEED_FULL: 374 case USB_SPEED_LOW: 375 power_mask = UPS_PORT_POWER; 376 break; 377 case USB_SPEED_SUPER: 378 if (udev->parent_hub == NULL) 379 power_mask = UPS_PORT_POWER; 380 else 381 power_mask = UPS_PORT_POWER_SS; 382 break; 383 default: 384 power_mask = 0; 385 break; 386 } 387 if (!(sc->sc_st.port_status & power_mask)) { 388 DPRINTF("WARNING: strange, connected port %d " 389 "has no power\n", portno); 390 } 391 392 /* check if the device is in Host Mode */ 393 394 if (!(sc->sc_st.port_status & UPS_PORT_MODE_DEVICE)) { 395 396 DPRINTF("Port %d is in Host Mode\n", portno); 397 398 if (sc->sc_st.port_status & UPS_SUSPEND) { 399 /* 400 * NOTE: Should not get here in SuperSpeed 401 * mode, because the HUB should report this 402 * bit as zero. 403 */ 404 DPRINTF("Port %d was still " 405 "suspended, clearing.\n", portno); 406 err = usbd_req_clear_port_feature(udev, 407 NULL, portno, UHF_PORT_SUSPEND); 408 } 409 410 /* USB Host Mode */ 411 412 /* wait for maximum device power up time */ 413 414 usb_pause_mtx(NULL, 415 USB_MS_TO_TICKS(USB_PORT_POWERUP_DELAY)); 416 417 /* reset port, which implies enabling it */ 418 419 err = usbd_req_reset_port(udev, NULL, portno); 420 421 if (err) { 422 DPRINTFN(0, "port %d reset " 423 "failed, error=%s\n", 424 portno, usbd_errstr(err)); 425 goto error; 426 } 427 /* get port status again, it might have changed during reset */ 428 429 err = uhub_read_port_status(sc, portno); 430 if (err) { 431 goto error; 432 } 433 /* check if something changed during port reset */ 434 435 if ((sc->sc_st.port_change & UPS_C_CONNECT_STATUS) || 436 (!(sc->sc_st.port_status & UPS_CURRENT_CONNECT_STATUS))) { 437 if (timeout) { 438 DPRINTFN(0, "giving up port reset " 439 "- device vanished\n"); 440 goto error; 441 } 442 timeout = 1; 443 goto repeat; 444 } 445 } else { 446 DPRINTF("Port %d is in Device Mode\n", portno); 447 } 448 449 /* 450 * Figure out the device speed 451 */ 452 switch (udev->speed) { 453 case USB_SPEED_HIGH: 454 if (sc->sc_st.port_status & UPS_HIGH_SPEED) 455 speed = USB_SPEED_HIGH; 456 else if (sc->sc_st.port_status & UPS_LOW_SPEED) 457 speed = USB_SPEED_LOW; 458 else 459 speed = USB_SPEED_FULL; 460 break; 461 case USB_SPEED_FULL: 462 if (sc->sc_st.port_status & UPS_LOW_SPEED) 463 speed = USB_SPEED_LOW; 464 else 465 speed = USB_SPEED_FULL; 466 break; 467 case USB_SPEED_LOW: 468 speed = USB_SPEED_LOW; 469 break; 470 case USB_SPEED_SUPER: 471 if (udev->parent_hub == NULL) { 472 /* Root HUB - special case */ 473 switch (sc->sc_st.port_status & UPS_OTHER_SPEED) { 474 case 0: 475 speed = USB_SPEED_FULL; 476 break; 477 case UPS_LOW_SPEED: 478 speed = USB_SPEED_LOW; 479 break; 480 case UPS_HIGH_SPEED: 481 speed = USB_SPEED_HIGH; 482 break; 483 default: 484 speed = USB_SPEED_SUPER; 485 break; 486 } 487 } else { 488 speed = USB_SPEED_SUPER; 489 } 490 break; 491 default: 492 /* same speed like parent */ 493 speed = udev->speed; 494 break; 495 } 496 if (speed == USB_SPEED_SUPER) { 497 err = usbd_req_set_hub_u1_timeout(udev, NULL, 498 portno, 128 - (2 * udev->depth)); 499 if (err) { 500 DPRINTFN(0, "port %d U1 timeout " 501 "failed, error=%s\n", 502 portno, usbd_errstr(err)); 503 } 504 err = usbd_req_set_hub_u2_timeout(udev, NULL, 505 portno, 128 - (2 * udev->depth)); 506 if (err) { 507 DPRINTFN(0, "port %d U2 timeout " 508 "failed, error=%s\n", 509 portno, usbd_errstr(err)); 510 } 511 } 512 513 /* 514 * Figure out the device mode 515 * 516 * NOTE: This part is currently FreeBSD specific. 517 */ 518 if (sc->sc_st.port_status & UPS_PORT_MODE_DEVICE) 519 mode = USB_MODE_DEVICE; 520 else 521 mode = USB_MODE_HOST; 522 523 /* need to create a new child */ 524 child = usb_alloc_device(sc->sc_dev, udev->bus, udev, 525 udev->depth + 1, portno - 1, portno, speed, mode); 526 if (child == NULL) { 527 DPRINTFN(0, "could not allocate new device\n"); 528 goto error; 529 } 530 return (0); /* success */ 531 532 error: 533 if (child != NULL) { 534 /* 535 * Free USB device and all subdevices, if any. 536 */ 537 usb_free_device(child, 0); 538 child = NULL; 539 } 540 if (err == 0) { 541 if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 542 err = usbd_req_clear_port_feature( 543 sc->sc_udev, NULL, 544 portno, UHF_PORT_ENABLE); 545 } 546 } 547 if (err) { 548 DPRINTFN(0, "device problem (%s), " 549 "disabling port %d\n", usbd_errstr(err), portno); 550 } 551 return (err); 552 } 553 554 /*------------------------------------------------------------------------* 555 * usb_device_20_compatible 556 * 557 * Returns: 558 * 0: HUB does not support suspend and resume 559 * Else: HUB supports suspend and resume 560 *------------------------------------------------------------------------*/ 561 static uint8_t 562 usb_device_20_compatible(struct usb_device *udev) 563 { 564 if (udev == NULL) 565 return (0); 566 switch (udev->speed) { 567 case USB_SPEED_LOW: 568 case USB_SPEED_FULL: 569 case USB_SPEED_HIGH: 570 return (1); 571 default: 572 return (0); 573 } 574 } 575 576 /*------------------------------------------------------------------------* 577 * uhub_suspend_resume_port 578 * 579 * Returns: 580 * 0: Success 581 * Else: A control transaction failed 582 *------------------------------------------------------------------------*/ 583 static usb_error_t 584 uhub_suspend_resume_port(struct uhub_softc *sc, uint8_t portno) 585 { 586 struct usb_device *child; 587 struct usb_device *udev; 588 uint8_t is_suspend; 589 usb_error_t err; 590 591 DPRINTF("port %d\n", portno); 592 593 udev = sc->sc_udev; 594 child = usb_bus_port_get_device(udev->bus, 595 udev->hub->ports + portno - 1); 596 597 /* first clear the port suspend change bit */ 598 599 if (usb_device_20_compatible(udev)) { 600 err = usbd_req_clear_port_feature(udev, NULL, 601 portno, UHF_C_PORT_SUSPEND); 602 } else { 603 err = usbd_req_clear_port_feature(udev, NULL, 604 portno, UHF_C_PORT_LINK_STATE); 605 } 606 607 if (err) { 608 DPRINTF("clearing suspend failed.\n"); 609 goto done; 610 } 611 /* get fresh status */ 612 613 err = uhub_read_port_status(sc, portno); 614 if (err) { 615 DPRINTF("reading port status failed.\n"); 616 goto done; 617 } 618 /* convert current state */ 619 620 if (usb_device_20_compatible(udev)) { 621 if (sc->sc_st.port_status & UPS_SUSPEND) { 622 is_suspend = 1; 623 } else { 624 is_suspend = 0; 625 } 626 } else { 627 switch (UPS_PORT_LINK_STATE_GET(sc->sc_st.port_status)) { 628 case UPS_PORT_LS_U3: 629 is_suspend = 1; 630 break; 631 case UPS_PORT_LS_SS_INA: 632 usbd_req_warm_reset_port(udev, NULL, portno); 633 is_suspend = 0; 634 break; 635 default: 636 is_suspend = 0; 637 break; 638 } 639 } 640 641 DPRINTF("suspended=%u\n", is_suspend); 642 643 /* do the suspend or resume */ 644 645 if (child) { 646 /* 647 * This code handle two cases: 1) Host Mode - we can only 648 * receive resume here 2) Device Mode - we can receive 649 * suspend and resume here 650 */ 651 if (is_suspend == 0) 652 usb_dev_resume_peer(child); 653 else if (child->flags.usb_mode == USB_MODE_DEVICE) 654 usb_dev_suspend_peer(child); 655 } 656 done: 657 return (err); 658 } 659 660 /*------------------------------------------------------------------------* 661 * uhub_root_interrupt 662 * 663 * This function is called when a Root HUB interrupt has 664 * happened. "ptr" and "len" makes up the Root HUB interrupt 665 * packet. This function is called having the "bus_mtx" locked. 666 *------------------------------------------------------------------------*/ 667 void 668 uhub_root_intr(struct usb_bus *bus, const uint8_t *ptr, uint8_t len) 669 { 670 USB_BUS_LOCK_ASSERT(bus); 671 672 usb_needs_explore(bus, 0); 673 } 674 675 static uint8_t 676 uhub_is_too_deep(struct usb_device *udev) 677 { 678 switch (udev->speed) { 679 case USB_SPEED_FULL: 680 case USB_SPEED_LOW: 681 case USB_SPEED_HIGH: 682 if (udev->depth > USB_HUB_MAX_DEPTH) 683 return (1); 684 break; 685 case USB_SPEED_SUPER: 686 if (udev->depth > USB_SS_HUB_DEPTH_MAX) 687 return (1); 688 break; 689 default: 690 break; 691 } 692 return (0); 693 } 694 695 /*------------------------------------------------------------------------* 696 * uhub_explore 697 * 698 * Returns: 699 * 0: Success 700 * Else: Failure 701 *------------------------------------------------------------------------*/ 702 static usb_error_t 703 uhub_explore(struct usb_device *udev) 704 { 705 struct usb_hub *hub; 706 struct uhub_softc *sc; 707 struct usb_port *up; 708 usb_error_t err; 709 uint8_t portno; 710 uint8_t x; 711 712 hub = udev->hub; 713 sc = hub->hubsoftc; 714 715 DPRINTFN(11, "udev=%p addr=%d\n", udev, udev->address); 716 717 /* ignore devices that are too deep */ 718 if (uhub_is_too_deep(udev)) 719 return (USB_ERR_TOO_DEEP); 720 721 /* check if device is suspended */ 722 if (udev->flags.self_suspended) { 723 /* need to wait until the child signals resume */ 724 DPRINTF("Device is suspended!\n"); 725 return (0); 726 } 727 728 /* 729 * Make sure we don't race against user-space applications 730 * like LibUSB: 731 */ 732 usbd_enum_lock(udev); 733 734 for (x = 0; x != hub->nports; x++) { 735 up = hub->ports + x; 736 portno = x + 1; 737 738 err = uhub_read_port_status(sc, portno); 739 if (err) { 740 /* most likely the HUB is gone */ 741 break; 742 } 743 if (sc->sc_st.port_change & UPS_C_OVERCURRENT_INDICATOR) { 744 DPRINTF("Overcurrent on port %u.\n", portno); 745 err = usbd_req_clear_port_feature( 746 udev, NULL, portno, UHF_C_PORT_OVER_CURRENT); 747 if (err) { 748 /* most likely the HUB is gone */ 749 break; 750 } 751 } 752 if (!(sc->sc_flags & UHUB_FLAG_DID_EXPLORE)) { 753 /* 754 * Fake a connect status change so that the 755 * status gets checked initially! 756 */ 757 sc->sc_st.port_change |= 758 UPS_C_CONNECT_STATUS; 759 } 760 if (sc->sc_st.port_change & UPS_C_PORT_ENABLED) { 761 err = usbd_req_clear_port_feature( 762 udev, NULL, portno, UHF_C_PORT_ENABLE); 763 if (err) { 764 /* most likely the HUB is gone */ 765 break; 766 } 767 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 768 /* 769 * Ignore the port error if the device 770 * has vanished ! 771 */ 772 } else if (sc->sc_st.port_status & UPS_PORT_ENABLED) { 773 DPRINTFN(0, "illegal enable change, " 774 "port %d\n", portno); 775 } else { 776 777 if (up->restartcnt == USB_RESTART_MAX) { 778 /* XXX could try another speed ? */ 779 DPRINTFN(0, "port error, giving up " 780 "port %d\n", portno); 781 } else { 782 sc->sc_st.port_change |= 783 UPS_C_CONNECT_STATUS; 784 up->restartcnt++; 785 } 786 } 787 } 788 if (sc->sc_st.port_change & UPS_C_CONNECT_STATUS) { 789 err = uhub_reattach_port(sc, portno); 790 if (err) { 791 /* most likely the HUB is gone */ 792 break; 793 } 794 } 795 if (sc->sc_st.port_change & (UPS_C_SUSPEND | 796 UPS_C_PORT_LINK_STATE)) { 797 err = uhub_suspend_resume_port(sc, portno); 798 if (err) { 799 /* most likely the HUB is gone */ 800 break; 801 } 802 } 803 err = uhub_explore_sub(sc, up); 804 if (err) { 805 /* no device(s) present */ 806 continue; 807 } 808 /* explore succeeded - reset restart counter */ 809 up->restartcnt = 0; 810 } 811 812 usbd_enum_unlock(udev); 813 814 /* initial status checked */ 815 sc->sc_flags |= UHUB_FLAG_DID_EXPLORE; 816 817 /* return success */ 818 return (USB_ERR_NORMAL_COMPLETION); 819 } 820 821 static int 822 uhub_probe(device_t dev) 823 { 824 struct usb_attach_arg *uaa = device_get_ivars(dev); 825 826 if (uaa->usb_mode != USB_MODE_HOST) 827 return (ENXIO); 828 829 /* 830 * The subclass for USB HUBs is currently ignored because it 831 * is 0 for some and 1 for others. 832 */ 833 if (uaa->info.bConfigIndex == 0 && 834 uaa->info.bDeviceClass == UDCLASS_HUB) 835 return (0); 836 837 return (ENXIO); 838 } 839 840 /* NOTE: The information returned by this function can be wrong. */ 841 usb_error_t 842 uhub_query_info(struct usb_device *udev, uint8_t *pnports, uint8_t *ptt) 843 { 844 struct usb_hub_descriptor hubdesc20; 845 struct usb_hub_ss_descriptor hubdesc30; 846 usb_error_t err; 847 uint8_t nports; 848 uint8_t tt; 849 850 if (udev->ddesc.bDeviceClass != UDCLASS_HUB) 851 return (USB_ERR_INVAL); 852 853 nports = 0; 854 tt = 0; 855 856 switch (udev->speed) { 857 case USB_SPEED_LOW: 858 case USB_SPEED_FULL: 859 case USB_SPEED_HIGH: 860 /* assuming that there is one port */ 861 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 862 if (err) { 863 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 864 "error=%s\n", usbd_errstr(err)); 865 break; 866 } 867 nports = hubdesc20.bNbrPorts; 868 if (nports > 127) 869 nports = 127; 870 871 if (udev->speed == USB_SPEED_HIGH) 872 tt = (UGETW(hubdesc20.wHubCharacteristics) >> 5) & 3; 873 break; 874 875 case USB_SPEED_SUPER: 876 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 877 if (err) { 878 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 879 "error=%s\n", usbd_errstr(err)); 880 break; 881 } 882 nports = hubdesc30.bNbrPorts; 883 if (nports > 16) 884 nports = 16; 885 break; 886 887 default: 888 err = USB_ERR_INVAL; 889 break; 890 } 891 892 if (pnports != NULL) 893 *pnports = nports; 894 895 if (ptt != NULL) 896 *ptt = tt; 897 898 return (err); 899 } 900 901 static int 902 uhub_attach(device_t dev) 903 { 904 struct uhub_softc *sc = device_get_softc(dev); 905 struct usb_attach_arg *uaa = device_get_ivars(dev); 906 struct usb_device *udev = uaa->device; 907 struct usb_device *parent_hub = udev->parent_hub; 908 struct usb_hub *hub; 909 struct usb_hub_descriptor hubdesc20; 910 struct usb_hub_ss_descriptor hubdesc30; 911 uint16_t pwrdly; 912 uint8_t x; 913 uint8_t nports; 914 uint8_t portno; 915 uint8_t removable; 916 uint8_t iface_index; 917 usb_error_t err; 918 919 sc->sc_udev = udev; 920 sc->sc_dev = dev; 921 922 lockinit(&sc->sc_lock, "USB HUB mutex", 0, 0); 923 924 ksnprintf(sc->sc_name, sizeof(sc->sc_name), "%s", 925 device_get_nameunit(dev)); 926 927 device_set_usb_desc(dev); 928 929 DPRINTFN(2, "depth=%d selfpowered=%d, parent=%p, " 930 "parent->selfpowered=%d\n", 931 udev->depth, 932 udev->flags.self_powered, 933 parent_hub, 934 parent_hub ? 935 parent_hub->flags.self_powered : 0); 936 937 if (uhub_is_too_deep(udev)) { 938 DPRINTFN(0, "HUB at depth %d, " 939 "exceeds maximum. HUB ignored\n", (int)udev->depth); 940 goto error; 941 } 942 943 if (!udev->flags.self_powered && parent_hub && 944 !parent_hub->flags.self_powered) { 945 DPRINTFN(0, "Bus powered HUB connected to " 946 "bus powered HUB. HUB ignored\n"); 947 goto error; 948 } 949 /* get HUB descriptor */ 950 951 DPRINTFN(2, "Getting HUB descriptor\n"); 952 953 switch (udev->speed) { 954 case USB_SPEED_LOW: 955 case USB_SPEED_FULL: 956 case USB_SPEED_HIGH: 957 /* assuming that there is one port */ 958 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, 1); 959 if (err) { 960 DPRINTFN(0, "getting USB 2.0 HUB descriptor failed," 961 "error=%s\n", usbd_errstr(err)); 962 goto error; 963 } 964 /* get number of ports */ 965 nports = hubdesc20.bNbrPorts; 966 967 /* get power delay */ 968 pwrdly = ((hubdesc20.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 969 USB_EXTRA_POWER_UP_TIME); 970 971 /* get complete HUB descriptor */ 972 if (nports >= 8) { 973 /* check number of ports */ 974 if (nports > 127) { 975 DPRINTFN(0, "Invalid number of USB 2.0 ports," 976 "error=%s\n", usbd_errstr(err)); 977 goto error; 978 } 979 /* get complete HUB descriptor */ 980 err = usbd_req_get_hub_descriptor(udev, NULL, &hubdesc20, nports); 981 982 if (err) { 983 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 984 "error=%s\n", usbd_errstr(err)); 985 goto error; 986 } 987 if (hubdesc20.bNbrPorts != nports) { 988 DPRINTFN(0, "Number of ports changed\n"); 989 goto error; 990 } 991 } 992 break; 993 case USB_SPEED_SUPER: 994 if (udev->parent_hub != NULL) { 995 err = usbd_req_set_hub_depth(udev, NULL, 996 udev->depth - 1); 997 if (err) { 998 DPRINTFN(0, "Setting USB 3.0 HUB depth failed," 999 "error=%s\n", usbd_errstr(err)); 1000 goto error; 1001 } 1002 } 1003 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, 1); 1004 if (err) { 1005 DPRINTFN(0, "Getting USB 3.0 HUB descriptor failed," 1006 "error=%s\n", usbd_errstr(err)); 1007 goto error; 1008 } 1009 /* get number of ports */ 1010 nports = hubdesc30.bNbrPorts; 1011 1012 /* get power delay */ 1013 pwrdly = ((hubdesc30.bPwrOn2PwrGood * UHD_PWRON_FACTOR) + 1014 USB_EXTRA_POWER_UP_TIME); 1015 1016 /* get complete HUB descriptor */ 1017 if (nports >= 8) { 1018 /* check number of ports */ 1019 if (nports > ((udev->parent_hub != NULL) ? 15 : 127)) { 1020 DPRINTFN(0, "Invalid number of USB 3.0 ports," 1021 "error=%s\n", usbd_errstr(err)); 1022 goto error; 1023 } 1024 /* get complete HUB descriptor */ 1025 err = usbd_req_get_ss_hub_descriptor(udev, NULL, &hubdesc30, nports); 1026 1027 if (err) { 1028 DPRINTFN(0, "Getting USB 2.0 HUB descriptor failed," 1029 "error=%s\n", usbd_errstr(err)); 1030 goto error; 1031 } 1032 if (hubdesc30.bNbrPorts != nports) { 1033 DPRINTFN(0, "Number of ports changed\n"); 1034 goto error; 1035 } 1036 } 1037 break; 1038 default: 1039 DPRINTF("Assuming HUB has only one port\n"); 1040 /* default number of ports */ 1041 nports = 1; 1042 /* default power delay */ 1043 pwrdly = ((10 * UHD_PWRON_FACTOR) + USB_EXTRA_POWER_UP_TIME); 1044 break; 1045 } 1046 if (nports == 0) { 1047 DPRINTFN(0, "portless HUB\n"); 1048 goto error; 1049 } 1050 hub = kmalloc(sizeof(hub[0]) + (sizeof(hub->ports[0]) * nports), 1051 M_USBDEV, M_WAITOK | M_ZERO); 1052 1053 udev->hub = hub; 1054 1055 #if USB_HAVE_TT_SUPPORT 1056 /* init FULL-speed ISOCHRONOUS schedule */ 1057 usbd_fs_isoc_schedule_init_all(hub->fs_isoc_schedule); 1058 #endif 1059 /* initialize HUB structure */ 1060 hub->hubsoftc = sc; 1061 hub->explore = &uhub_explore; 1062 hub->nports = nports; 1063 hub->hubudev = udev; 1064 1065 /* if self powered hub, give ports maximum current */ 1066 if (udev->flags.self_powered) { 1067 hub->portpower = USB_MAX_POWER; 1068 } else { 1069 hub->portpower = USB_MIN_POWER; 1070 } 1071 1072 /* set up interrupt pipe */ 1073 iface_index = 0; 1074 if (udev->parent_hub == NULL) { 1075 /* root HUB is special */ 1076 err = 0; 1077 } else { 1078 /* normal HUB */ 1079 err = usbd_transfer_setup(udev, &iface_index, sc->sc_xfer, 1080 uhub_config, UHUB_N_TRANSFER, sc, &sc->sc_lock); 1081 } 1082 if (err) { 1083 DPRINTFN(0, "cannot setup interrupt transfer, " 1084 "errstr=%s\n", usbd_errstr(err)); 1085 goto error; 1086 } 1087 /* wait with power off for a while */ 1088 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_POWER_DOWN_TIME)); 1089 1090 /* 1091 * To have the best chance of success we do things in the exact same 1092 * order as Windoze98. This should not be necessary, but some 1093 * devices do not follow the USB specs to the letter. 1094 * 1095 * These are the events on the bus when a hub is attached: 1096 * Get device and config descriptors (see attach code) 1097 * Get hub descriptor (see above) 1098 * For all ports 1099 * turn on power 1100 * wait for power to become stable 1101 * (all below happens in explore code) 1102 * For all ports 1103 * clear C_PORT_CONNECTION 1104 * For all ports 1105 * get port status 1106 * if device connected 1107 * wait 100 ms 1108 * turn on reset 1109 * wait 1110 * clear C_PORT_RESET 1111 * get port status 1112 * proceed with device attachment 1113 */ 1114 1115 /* XXX should check for none, individual, or ganged power? */ 1116 1117 removable = 0; 1118 1119 for (x = 0; x != nports; x++) { 1120 /* set up data structures */ 1121 struct usb_port *up = hub->ports + x; 1122 1123 up->device_index = 0; 1124 up->restartcnt = 0; 1125 portno = x + 1; 1126 1127 /* check if port is removable */ 1128 switch (udev->speed) { 1129 case USB_SPEED_LOW: 1130 case USB_SPEED_FULL: 1131 case USB_SPEED_HIGH: 1132 if (!UHD_NOT_REMOV(&hubdesc20, portno)) 1133 removable++; 1134 break; 1135 case USB_SPEED_SUPER: 1136 if (!UHD_NOT_REMOV(&hubdesc30, portno)) 1137 removable++; 1138 break; 1139 default: 1140 DPRINTF("Assuming removable port\n"); 1141 removable++; 1142 break; 1143 } 1144 if (!err) { 1145 /* turn the power on */ 1146 err = usbd_req_set_port_feature(udev, NULL, 1147 portno, UHF_PORT_POWER); 1148 } 1149 if (err) { 1150 DPRINTFN(0, "port %d power on failed, %s\n", 1151 portno, usbd_errstr(err)); 1152 } 1153 DPRINTF("turn on port %d power\n", 1154 portno); 1155 1156 /* wait for stable power */ 1157 usb_pause_mtx(NULL, USB_MS_TO_TICKS(pwrdly)); 1158 } 1159 1160 device_printf(dev, "%d port%s with %d " 1161 "removable, %s powered\n", nports, (nports != 1) ? "s" : "", 1162 removable, udev->flags.self_powered ? "self" : "bus"); 1163 1164 /* Start the interrupt endpoint, if any */ 1165 1166 if (sc->sc_xfer[0] != NULL) { 1167 lockmgr(&sc->sc_lock, LK_EXCLUSIVE); 1168 usbd_transfer_start(sc->sc_xfer[0]); 1169 lockmgr(&sc->sc_lock, LK_RELEASE); 1170 } 1171 1172 /* Enable automatic power save on all USB HUBs */ 1173 1174 usbd_set_power_mode(udev, USB_POWER_MODE_SAVE); 1175 1176 return (0); 1177 1178 error: 1179 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1180 1181 if (udev->hub) { 1182 kfree(udev->hub, M_USBDEV); 1183 udev->hub = NULL; 1184 } 1185 1186 lockuninit(&sc->sc_lock); 1187 1188 return (ENXIO); 1189 } 1190 1191 /* 1192 * Called from process context when the hub is gone. 1193 * Detach all devices on active ports. 1194 */ 1195 static int 1196 uhub_detach(device_t dev) 1197 { 1198 struct uhub_softc *sc = device_get_softc(dev); 1199 struct usb_hub *hub = sc->sc_udev->hub; 1200 struct usb_device *child; 1201 uint8_t x; 1202 1203 if (hub == NULL) /* must be partially working */ 1204 return (0); 1205 1206 /* Make sure interrupt transfer is gone. */ 1207 usbd_transfer_unsetup(sc->sc_xfer, UHUB_N_TRANSFER); 1208 1209 /* Detach all ports */ 1210 for (x = 0; x != hub->nports; x++) { 1211 1212 child = usb_bus_port_get_device(sc->sc_udev->bus, hub->ports + x); 1213 1214 if (child == NULL) { 1215 continue; 1216 } 1217 1218 /* 1219 * Free USB device and all subdevices, if any. 1220 */ 1221 usb_free_device(child, 0); 1222 } 1223 1224 kfree(hub, M_USBDEV); 1225 sc->sc_udev->hub = NULL; 1226 1227 lockuninit(&sc->sc_lock); 1228 1229 return (0); 1230 } 1231 1232 static int 1233 uhub_suspend(device_t dev) 1234 { 1235 DPRINTF("\n"); 1236 /* Sub-devices are not suspended here! */ 1237 return (0); 1238 } 1239 1240 static int 1241 uhub_resume(device_t dev) 1242 { 1243 DPRINTF("\n"); 1244 /* Sub-devices are not resumed here! */ 1245 return (0); 1246 } 1247 1248 static void 1249 uhub_driver_added(device_t dev, driver_t *driver) 1250 { 1251 usb_needs_explore_all(); 1252 } 1253 1254 struct hub_result { 1255 struct usb_device *udev; 1256 uint8_t portno; 1257 uint8_t iface_index; 1258 }; 1259 1260 static void 1261 uhub_find_iface_index(struct usb_hub *hub, device_t child, 1262 struct hub_result *res) 1263 { 1264 struct usb_interface *iface; 1265 struct usb_device *udev; 1266 uint8_t nports; 1267 uint8_t x; 1268 uint8_t i; 1269 1270 nports = hub->nports; 1271 for (x = 0; x != nports; x++) { 1272 udev = usb_bus_port_get_device(hub->hubudev->bus, 1273 hub->ports + x); 1274 if (!udev) { 1275 continue; 1276 } 1277 for (i = 0; i != USB_IFACE_MAX; i++) { 1278 iface = usbd_get_iface(udev, i); 1279 if (iface && 1280 (iface->subdev == child)) { 1281 res->iface_index = i; 1282 res->udev = udev; 1283 res->portno = x + 1; 1284 return; 1285 } 1286 } 1287 } 1288 res->iface_index = 0; 1289 res->udev = NULL; 1290 res->portno = 0; 1291 } 1292 1293 static int 1294 uhub_child_location_string(device_t parent, device_t child, 1295 char *buf, size_t buflen) 1296 { 1297 struct uhub_softc *sc; 1298 struct usb_hub *hub; 1299 struct hub_result res; 1300 1301 if (!device_is_attached(parent)) { 1302 if (buflen) 1303 buf[0] = 0; 1304 return (0); 1305 } 1306 1307 sc = device_get_softc(parent); 1308 hub = sc->sc_udev->hub; 1309 1310 #if 0 1311 mtx_lock(&Giant); 1312 #endif 1313 uhub_find_iface_index(hub, child, &res); 1314 if (!res.udev) { 1315 DPRINTF("device not on hub\n"); 1316 if (buflen) { 1317 buf[0] = '\0'; 1318 } 1319 goto done; 1320 } 1321 ksnprintf(buf, buflen, "bus=%u hubaddr=%u port=%u devaddr=%u interface=%u", 1322 (res.udev->parent_hub != NULL) ? res.udev->parent_hub->device_index : 0, 1323 res.portno, device_get_unit(res.udev->bus->bdev), 1324 res.udev->device_index, res.iface_index); 1325 done: 1326 #if 0 1327 mtx_unlock(&Giant); 1328 #endif 1329 1330 return (0); 1331 } 1332 1333 static int 1334 uhub_child_pnpinfo_string(device_t parent, device_t child, 1335 char *buf, size_t buflen) 1336 { 1337 struct uhub_softc *sc; 1338 struct usb_hub *hub; 1339 struct usb_interface *iface; 1340 struct hub_result res; 1341 1342 if (!device_is_attached(parent)) { 1343 if (buflen) 1344 buf[0] = 0; 1345 return (0); 1346 } 1347 1348 sc = device_get_softc(parent); 1349 hub = sc->sc_udev->hub; 1350 1351 #if 0 1352 mtx_lock(&Giant); 1353 #endif 1354 uhub_find_iface_index(hub, child, &res); 1355 if (!res.udev) { 1356 DPRINTF("device not on hub\n"); 1357 if (buflen) { 1358 buf[0] = '\0'; 1359 } 1360 goto done; 1361 } 1362 iface = usbd_get_iface(res.udev, res.iface_index); 1363 if (iface && iface->idesc) { 1364 ksnprintf(buf, buflen, "vendor=0x%04x product=0x%04x " 1365 "devclass=0x%02x devsubclass=0x%02x " 1366 "sernum=\"%s\" " 1367 "release=0x%04x " 1368 "mode=%s " 1369 "intclass=0x%02x intsubclass=0x%02x " 1370 "intprotocol=0x%02x " "%s%s", 1371 UGETW(res.udev->ddesc.idVendor), 1372 UGETW(res.udev->ddesc.idProduct), 1373 res.udev->ddesc.bDeviceClass, 1374 res.udev->ddesc.bDeviceSubClass, 1375 usb_get_serial(res.udev), 1376 UGETW(res.udev->ddesc.bcdDevice), 1377 (res.udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device", 1378 iface->idesc->bInterfaceClass, 1379 iface->idesc->bInterfaceSubClass, 1380 iface->idesc->bInterfaceProtocol, 1381 iface->pnpinfo ? " " : "", 1382 iface->pnpinfo ? iface->pnpinfo : ""); 1383 } else { 1384 if (buflen) { 1385 buf[0] = '\0'; 1386 } 1387 goto done; 1388 } 1389 done: 1390 #if 0 1391 mtx_unlock(&Giant); 1392 #endif 1393 1394 return (0); 1395 } 1396 1397 /* 1398 * The USB Transaction Translator: 1399 * =============================== 1400 * 1401 * When doing LOW- and FULL-speed USB transfers accross a HIGH-speed 1402 * USB HUB, bandwidth must be allocated for ISOCHRONOUS and INTERRUPT 1403 * USB transfers. To utilize bandwidth dynamically the "scatter and 1404 * gather" principle must be applied. This means that bandwidth must 1405 * be divided into equal parts of bandwidth. With regard to USB all 1406 * data is transferred in smaller packets with length 1407 * "wMaxPacketSize". The problem however is that "wMaxPacketSize" is 1408 * not a constant! 1409 * 1410 * The bandwidth scheduler which I have implemented will simply pack 1411 * the USB transfers back to back until there is no more space in the 1412 * schedule. Out of the 8 microframes which the USB 2.0 standard 1413 * provides, only 6 are available for non-HIGH-speed devices. I have 1414 * reserved the first 4 microframes for ISOCHRONOUS transfers. The 1415 * last 2 microframes I have reserved for INTERRUPT transfers. Without 1416 * this division, it is very difficult to allocate and free bandwidth 1417 * dynamically. 1418 * 1419 * NOTE about the Transaction Translator in USB HUBs: 1420 * 1421 * USB HUBs have a very simple Transaction Translator, that will 1422 * simply pipeline all the SPLIT transactions. That means that the 1423 * transactions will be executed in the order they are queued! 1424 * 1425 */ 1426 1427 /*------------------------------------------------------------------------* 1428 * usb_intr_find_best_slot 1429 * 1430 * Return value: 1431 * The best Transaction Translation slot for an interrupt endpoint. 1432 *------------------------------------------------------------------------*/ 1433 static uint8_t 1434 usb_intr_find_best_slot(usb_size_t *ptr, uint8_t start, 1435 uint8_t end, uint8_t mask) 1436 { 1437 usb_size_t min = 0 - 1; 1438 usb_size_t sum; 1439 uint8_t x; 1440 uint8_t y; 1441 uint8_t z; 1442 1443 y = 0; 1444 1445 /* find the last slot with lesser used bandwidth */ 1446 1447 for (x = start; x < end; x++) { 1448 1449 sum = 0; 1450 1451 /* compute sum of bandwidth */ 1452 for (z = x; z < end; z++) { 1453 if (mask & (1U << (z - x))) 1454 sum += ptr[z]; 1455 } 1456 1457 /* check if the current multi-slot is more optimal */ 1458 if (min >= sum) { 1459 min = sum; 1460 y = x; 1461 } 1462 1463 /* check if the mask is about to be shifted out */ 1464 if (mask & (1U << (end - 1 - x))) 1465 break; 1466 } 1467 return (y); 1468 } 1469 1470 /*------------------------------------------------------------------------* 1471 * usb_hs_bandwidth_adjust 1472 * 1473 * This function will update the bandwith usage for the microframe 1474 * having index "slot" by "len" bytes. "len" can be negative. If the 1475 * "slot" argument is greater or equal to "USB_HS_MICRO_FRAMES_MAX" 1476 * the "slot" argument will be replaced by the slot having least used 1477 * bandwidth. The "mask" argument is used for multi-slot allocations. 1478 * 1479 * Returns: 1480 * The slot in which the bandwidth update was done: 0..7 1481 *------------------------------------------------------------------------*/ 1482 static uint8_t 1483 usb_hs_bandwidth_adjust(struct usb_device *udev, int16_t len, 1484 uint8_t slot, uint8_t mask) 1485 { 1486 struct usb_bus *bus = udev->bus; 1487 struct usb_hub *hub; 1488 enum usb_dev_speed speed; 1489 uint8_t x; 1490 1491 USB_BUS_LOCK_ASSERT(bus); 1492 1493 speed = usbd_get_speed(udev); 1494 1495 switch (speed) { 1496 case USB_SPEED_LOW: 1497 case USB_SPEED_FULL: 1498 if (speed == USB_SPEED_LOW) { 1499 len *= 8; 1500 } 1501 /* 1502 * The Host Controller Driver should have 1503 * performed checks so that the lookup 1504 * below does not result in a NULL pointer 1505 * access. 1506 */ 1507 1508 hub = udev->parent_hs_hub->hub; 1509 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1510 slot = usb_intr_find_best_slot(hub->uframe_usage, 1511 USB_FS_ISOC_UFRAME_MAX, 6, mask); 1512 } 1513 for (x = slot; x < 8; x++) { 1514 if (mask & (1U << (x - slot))) { 1515 hub->uframe_usage[x] += len; 1516 bus->uframe_usage[x] += len; 1517 } 1518 } 1519 break; 1520 default: 1521 if (slot >= USB_HS_MICRO_FRAMES_MAX) { 1522 slot = usb_intr_find_best_slot(bus->uframe_usage, 0, 1523 USB_HS_MICRO_FRAMES_MAX, mask); 1524 } 1525 for (x = slot; x < 8; x++) { 1526 if (mask & (1U << (x - slot))) { 1527 bus->uframe_usage[x] += len; 1528 } 1529 } 1530 break; 1531 } 1532 return (slot); 1533 } 1534 1535 /*------------------------------------------------------------------------* 1536 * usb_hs_bandwidth_alloc 1537 * 1538 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1539 *------------------------------------------------------------------------*/ 1540 void 1541 usb_hs_bandwidth_alloc(struct usb_xfer *xfer) 1542 { 1543 struct usb_device *udev; 1544 uint8_t slot; 1545 uint8_t mask; 1546 uint8_t speed; 1547 1548 udev = xfer->xroot->udev; 1549 1550 if (udev->flags.usb_mode != USB_MODE_HOST) 1551 return; /* not supported */ 1552 1553 xfer->endpoint->refcount_bw++; 1554 if (xfer->endpoint->refcount_bw != 1) 1555 return; /* already allocated */ 1556 1557 speed = usbd_get_speed(udev); 1558 1559 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1560 case UE_INTERRUPT: 1561 /* allocate a microframe slot */ 1562 1563 mask = 0x01; 1564 slot = usb_hs_bandwidth_adjust(udev, 1565 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1566 1567 xfer->endpoint->usb_uframe = slot; 1568 xfer->endpoint->usb_smask = mask << slot; 1569 1570 if ((speed != USB_SPEED_FULL) && 1571 (speed != USB_SPEED_LOW)) { 1572 xfer->endpoint->usb_cmask = 0x00 ; 1573 } else { 1574 xfer->endpoint->usb_cmask = (-(0x04 << slot)) & 0xFE; 1575 } 1576 break; 1577 1578 case UE_ISOCHRONOUS: 1579 switch (usbd_xfer_get_fps_shift(xfer)) { 1580 case 0: 1581 mask = 0xFF; 1582 break; 1583 case 1: 1584 mask = 0x55; 1585 break; 1586 case 2: 1587 mask = 0x11; 1588 break; 1589 default: 1590 mask = 0x01; 1591 break; 1592 } 1593 1594 /* allocate a microframe multi-slot */ 1595 1596 slot = usb_hs_bandwidth_adjust(udev, 1597 xfer->max_frame_size, USB_HS_MICRO_FRAMES_MAX, mask); 1598 1599 xfer->endpoint->usb_uframe = slot; 1600 xfer->endpoint->usb_cmask = 0; 1601 xfer->endpoint->usb_smask = mask << slot; 1602 break; 1603 1604 default: 1605 xfer->endpoint->usb_uframe = 0; 1606 xfer->endpoint->usb_cmask = 0; 1607 xfer->endpoint->usb_smask = 0; 1608 break; 1609 } 1610 1611 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1612 xfer->endpoint->usb_uframe, 1613 xfer->endpoint->usb_smask >> xfer->endpoint->usb_uframe); 1614 } 1615 1616 /*------------------------------------------------------------------------* 1617 * usb_hs_bandwidth_free 1618 * 1619 * This function is a wrapper function for "usb_hs_bandwidth_adjust()". 1620 *------------------------------------------------------------------------*/ 1621 void 1622 usb_hs_bandwidth_free(struct usb_xfer *xfer) 1623 { 1624 struct usb_device *udev; 1625 uint8_t slot; 1626 uint8_t mask; 1627 1628 udev = xfer->xroot->udev; 1629 1630 if (udev->flags.usb_mode != USB_MODE_HOST) 1631 return; /* not supported */ 1632 1633 xfer->endpoint->refcount_bw--; 1634 if (xfer->endpoint->refcount_bw != 0) 1635 return; /* still allocated */ 1636 1637 switch (xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE) { 1638 case UE_INTERRUPT: 1639 case UE_ISOCHRONOUS: 1640 1641 slot = xfer->endpoint->usb_uframe; 1642 mask = xfer->endpoint->usb_smask; 1643 1644 /* free microframe slot(s): */ 1645 usb_hs_bandwidth_adjust(udev, 1646 -xfer->max_frame_size, slot, mask >> slot); 1647 1648 DPRINTFN(11, "slot=%d, mask=0x%02x\n", 1649 slot, mask >> slot); 1650 1651 xfer->endpoint->usb_uframe = 0; 1652 xfer->endpoint->usb_cmask = 0; 1653 xfer->endpoint->usb_smask = 0; 1654 break; 1655 1656 default: 1657 break; 1658 } 1659 } 1660 1661 /*------------------------------------------------------------------------* 1662 * usbd_fs_isoc_schedule_init_sub 1663 * 1664 * This function initialises an USB FULL speed isochronous schedule 1665 * entry. 1666 *------------------------------------------------------------------------*/ 1667 #if USB_HAVE_TT_SUPPORT 1668 static void 1669 usbd_fs_isoc_schedule_init_sub(struct usb_fs_isoc_schedule *fss) 1670 { 1671 fss->total_bytes = (USB_FS_ISOC_UFRAME_MAX * 1672 USB_FS_BYTES_PER_HS_UFRAME); 1673 fss->frame_bytes = (USB_FS_BYTES_PER_HS_UFRAME); 1674 fss->frame_slot = 0; 1675 } 1676 #endif 1677 1678 /*------------------------------------------------------------------------* 1679 * usbd_fs_isoc_schedule_init_all 1680 * 1681 * This function will reset the complete USB FULL speed isochronous 1682 * bandwidth schedule. 1683 *------------------------------------------------------------------------*/ 1684 #if USB_HAVE_TT_SUPPORT 1685 void 1686 usbd_fs_isoc_schedule_init_all(struct usb_fs_isoc_schedule *fss) 1687 { 1688 struct usb_fs_isoc_schedule *fss_end = fss + USB_ISOC_TIME_MAX; 1689 1690 while (fss != fss_end) { 1691 usbd_fs_isoc_schedule_init_sub(fss); 1692 fss++; 1693 } 1694 } 1695 #endif 1696 1697 /*------------------------------------------------------------------------* 1698 * usb_isoc_time_expand 1699 * 1700 * This function will expand the time counter from 7-bit to 16-bit. 1701 * 1702 * Returns: 1703 * 16-bit isochronous time counter. 1704 *------------------------------------------------------------------------*/ 1705 uint16_t 1706 usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr) 1707 { 1708 uint16_t rem; 1709 1710 USB_BUS_LOCK_ASSERT(bus); 1711 1712 rem = bus->isoc_time_last & (USB_ISOC_TIME_MAX - 1); 1713 1714 isoc_time_curr &= (USB_ISOC_TIME_MAX - 1); 1715 1716 if (isoc_time_curr < rem) { 1717 /* the time counter wrapped around */ 1718 bus->isoc_time_last += USB_ISOC_TIME_MAX; 1719 } 1720 /* update the remainder */ 1721 1722 bus->isoc_time_last &= ~(USB_ISOC_TIME_MAX - 1); 1723 bus->isoc_time_last |= isoc_time_curr; 1724 1725 return (bus->isoc_time_last); 1726 } 1727 1728 /*------------------------------------------------------------------------* 1729 * usbd_fs_isoc_schedule_isoc_time_expand 1730 * 1731 * This function does multiple things. First of all it will expand the 1732 * passed isochronous time, which is the return value. Then it will 1733 * store where the current FULL speed isochronous schedule is 1734 * positioned in time and where the end is. See "pp_start" and 1735 * "pp_end" arguments. 1736 * 1737 * Returns: 1738 * Expanded version of "isoc_time". 1739 * 1740 * NOTE: This function depends on being called regularly with 1741 * intervals less than "USB_ISOC_TIME_MAX". 1742 *------------------------------------------------------------------------*/ 1743 #if USB_HAVE_TT_SUPPORT 1744 uint16_t 1745 usbd_fs_isoc_schedule_isoc_time_expand(struct usb_device *udev, 1746 struct usb_fs_isoc_schedule **pp_start, 1747 struct usb_fs_isoc_schedule **pp_end, 1748 uint16_t isoc_time) 1749 { 1750 struct usb_fs_isoc_schedule *fss_end; 1751 struct usb_fs_isoc_schedule *fss_a; 1752 struct usb_fs_isoc_schedule *fss_b; 1753 struct usb_hub *hs_hub; 1754 1755 isoc_time = usb_isoc_time_expand(udev->bus, isoc_time); 1756 1757 hs_hub = udev->parent_hs_hub->hub; 1758 1759 if (hs_hub != NULL) { 1760 1761 fss_a = hs_hub->fs_isoc_schedule + 1762 (hs_hub->isoc_last_time % USB_ISOC_TIME_MAX); 1763 1764 hs_hub->isoc_last_time = isoc_time; 1765 1766 fss_b = hs_hub->fs_isoc_schedule + 1767 (isoc_time % USB_ISOC_TIME_MAX); 1768 1769 fss_end = hs_hub->fs_isoc_schedule + USB_ISOC_TIME_MAX; 1770 1771 *pp_start = hs_hub->fs_isoc_schedule; 1772 *pp_end = fss_end; 1773 1774 while (fss_a != fss_b) { 1775 if (fss_a == fss_end) { 1776 fss_a = hs_hub->fs_isoc_schedule; 1777 continue; 1778 } 1779 usbd_fs_isoc_schedule_init_sub(fss_a); 1780 fss_a++; 1781 } 1782 1783 } else { 1784 1785 *pp_start = NULL; 1786 *pp_end = NULL; 1787 } 1788 return (isoc_time); 1789 } 1790 #endif 1791 1792 /*------------------------------------------------------------------------* 1793 * usbd_fs_isoc_schedule_alloc 1794 * 1795 * This function will allocate bandwidth for an isochronous FULL speed 1796 * transaction in the FULL speed schedule. The microframe slot where 1797 * the transaction should be started is stored in the byte pointed to 1798 * by "pstart". The "len" argument specifies the length of the 1799 * transaction in bytes. 1800 * 1801 * Returns: 1802 * 0: Success 1803 * Else: Error 1804 *------------------------------------------------------------------------*/ 1805 #if USB_HAVE_TT_SUPPORT 1806 uint8_t 1807 usbd_fs_isoc_schedule_alloc(struct usb_fs_isoc_schedule *fss, 1808 uint8_t *pstart, uint16_t len) 1809 { 1810 uint8_t slot = fss->frame_slot; 1811 1812 /* Compute overhead and bit-stuffing */ 1813 1814 len += 8; 1815 1816 len *= 7; 1817 len /= 6; 1818 1819 if (len > fss->total_bytes) { 1820 *pstart = 0; /* set some dummy value */ 1821 return (1); /* error */ 1822 } 1823 if (len > 0) { 1824 1825 fss->total_bytes -= len; 1826 1827 while (len >= fss->frame_bytes) { 1828 len -= fss->frame_bytes; 1829 fss->frame_bytes = USB_FS_BYTES_PER_HS_UFRAME; 1830 fss->frame_slot++; 1831 } 1832 1833 fss->frame_bytes -= len; 1834 } 1835 *pstart = slot; 1836 return (0); /* success */ 1837 } 1838 #endif 1839 1840 /*------------------------------------------------------------------------* 1841 * usb_bus_port_get_device 1842 * 1843 * This function is NULL safe. 1844 *------------------------------------------------------------------------*/ 1845 struct usb_device * 1846 usb_bus_port_get_device(struct usb_bus *bus, struct usb_port *up) 1847 { 1848 if ((bus == NULL) || (up == NULL)) { 1849 /* be NULL safe */ 1850 return (NULL); 1851 } 1852 if (up->device_index == 0) { 1853 /* nothing to do */ 1854 return (NULL); 1855 } 1856 return (bus->devices[up->device_index]); 1857 } 1858 1859 /*------------------------------------------------------------------------* 1860 * usb_bus_port_set_device 1861 * 1862 * This function is NULL safe. 1863 *------------------------------------------------------------------------*/ 1864 void 1865 usb_bus_port_set_device(struct usb_bus *bus, struct usb_port *up, 1866 struct usb_device *udev, uint8_t device_index) 1867 { 1868 if (bus == NULL) { 1869 /* be NULL safe */ 1870 return; 1871 } 1872 /* 1873 * There is only one case where we don't 1874 * have an USB port, and that is the Root Hub! 1875 */ 1876 if (up) { 1877 if (udev) { 1878 up->device_index = device_index; 1879 } else { 1880 device_index = up->device_index; 1881 up->device_index = 0; 1882 } 1883 } 1884 /* 1885 * Make relationships to our new device 1886 */ 1887 if (device_index != 0) { 1888 #if USB_HAVE_UGEN 1889 lockmgr(&usb_ref_lock, LK_EXCLUSIVE); 1890 #endif 1891 bus->devices[device_index] = udev; 1892 #if USB_HAVE_UGEN 1893 lockmgr(&usb_ref_lock, LK_RELEASE); 1894 #endif 1895 } 1896 /* 1897 * Debug print 1898 */ 1899 DPRINTFN(2, "bus %p devices[%u] = %p\n", bus, device_index, udev); 1900 } 1901 1902 /*------------------------------------------------------------------------* 1903 * usb_needs_explore 1904 * 1905 * This functions is called when the USB event thread needs to run. 1906 *------------------------------------------------------------------------*/ 1907 void 1908 usb_needs_explore(struct usb_bus *bus, uint8_t do_probe) 1909 { 1910 uint8_t do_unlock; 1911 1912 DPRINTF("\n"); 1913 1914 if (bus == NULL) { 1915 DPRINTF("No bus pointer!\n"); 1916 return; 1917 } 1918 if ((bus->devices == NULL) || 1919 (bus->devices[USB_ROOT_HUB_ADDR] == NULL)) { 1920 DPRINTF("No root HUB\n"); 1921 return; 1922 } 1923 if (lockowned(&bus->bus_lock) != 0) { 1924 do_unlock = 0; 1925 } else { 1926 USB_BUS_LOCK(bus); 1927 do_unlock = 1; 1928 } 1929 if (do_probe) { 1930 bus->do_probe = 1; 1931 } 1932 if (usb_proc_msignal(&bus->explore_proc, 1933 &bus->explore_msg[0], &bus->explore_msg[1])) { 1934 /* ignore */ 1935 } 1936 if (do_unlock) { 1937 USB_BUS_UNLOCK(bus); 1938 } 1939 } 1940 1941 /*------------------------------------------------------------------------* 1942 * usb_needs_explore_all 1943 * 1944 * This function is called whenever a new driver is loaded and will 1945 * cause that all USB busses are re-explored. 1946 *------------------------------------------------------------------------*/ 1947 void 1948 usb_needs_explore_all(void) 1949 { 1950 struct usb_bus *bus; 1951 devclass_t dc; 1952 device_t dev; 1953 int max; 1954 1955 DPRINTFN(3, "\n"); 1956 1957 dc = usb_devclass_ptr; 1958 if (dc == NULL) { 1959 DPRINTFN(0, "no devclass\n"); 1960 return; 1961 } 1962 /* 1963 * Explore all USB busses in parallell. 1964 */ 1965 max = devclass_get_maxunit(dc); 1966 while (max >= 0) { 1967 dev = devclass_get_device(dc, max); 1968 if (dev) { 1969 bus = device_get_softc(dev); 1970 if (bus) { 1971 usb_needs_explore(bus, 1); 1972 } 1973 } 1974 max--; 1975 } 1976 } 1977 1978 /*------------------------------------------------------------------------* 1979 * usb_bus_power_update 1980 * 1981 * This function will ensure that all USB devices on the given bus are 1982 * properly suspended or resumed according to the device transfer 1983 * state. 1984 *------------------------------------------------------------------------*/ 1985 #if USB_HAVE_POWERD 1986 void 1987 usb_bus_power_update(struct usb_bus *bus) 1988 { 1989 usb_needs_explore(bus, 0 /* no probe */ ); 1990 } 1991 #endif 1992 1993 /*------------------------------------------------------------------------* 1994 * usbd_transfer_power_ref 1995 * 1996 * This function will modify the power save reference counts and 1997 * wakeup the USB device associated with the given USB transfer, if 1998 * needed. 1999 *------------------------------------------------------------------------*/ 2000 #if USB_HAVE_POWERD 2001 void 2002 usbd_transfer_power_ref(struct usb_xfer *xfer, int val) 2003 { 2004 static const usb_power_mask_t power_mask[4] = { 2005 [UE_CONTROL] = USB_HW_POWER_CONTROL, 2006 [UE_BULK] = USB_HW_POWER_BULK, 2007 [UE_INTERRUPT] = USB_HW_POWER_INTERRUPT, 2008 [UE_ISOCHRONOUS] = USB_HW_POWER_ISOC, 2009 }; 2010 struct usb_device *udev; 2011 uint8_t needs_explore; 2012 uint8_t needs_hw_power; 2013 uint8_t xfer_type; 2014 2015 udev = xfer->xroot->udev; 2016 2017 if (udev->device_index == USB_ROOT_HUB_ADDR) { 2018 /* no power save for root HUB */ 2019 return; 2020 } 2021 USB_BUS_LOCK(udev->bus); 2022 2023 xfer_type = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; 2024 2025 udev->pwr_save.last_xfer_time = ticks; 2026 udev->pwr_save.type_refs[xfer_type] += val; 2027 2028 if (xfer->flags_int.control_xfr) { 2029 udev->pwr_save.read_refs += val; 2030 if (xfer->flags_int.usb_mode == USB_MODE_HOST) { 2031 /* 2032 * It is not allowed to suspend during a 2033 * control transfer: 2034 */ 2035 udev->pwr_save.write_refs += val; 2036 } 2037 } else if (USB_GET_DATA_ISREAD(xfer)) { 2038 udev->pwr_save.read_refs += val; 2039 } else { 2040 udev->pwr_save.write_refs += val; 2041 } 2042 2043 if (val > 0) { 2044 if (udev->flags.self_suspended) 2045 needs_explore = usb_peer_should_wakeup(udev); 2046 else 2047 needs_explore = 0; 2048 2049 if (!(udev->bus->hw_power_state & power_mask[xfer_type])) { 2050 DPRINTF("Adding type %u to power state\n", xfer_type); 2051 udev->bus->hw_power_state |= power_mask[xfer_type]; 2052 needs_hw_power = 1; 2053 } else { 2054 needs_hw_power = 0; 2055 } 2056 } else { 2057 needs_explore = 0; 2058 needs_hw_power = 0; 2059 } 2060 2061 USB_BUS_UNLOCK(udev->bus); 2062 2063 if (needs_explore) { 2064 DPRINTF("update\n"); 2065 usb_bus_power_update(udev->bus); 2066 } else if (needs_hw_power) { 2067 DPRINTF("needs power\n"); 2068 if (udev->bus->methods->set_hw_power != NULL) { 2069 (udev->bus->methods->set_hw_power) (udev->bus); 2070 } 2071 } 2072 } 2073 #endif 2074 2075 /*------------------------------------------------------------------------* 2076 * usb_peer_should_wakeup 2077 * 2078 * This function returns non-zero if the current device should wake up. 2079 *------------------------------------------------------------------------*/ 2080 static uint8_t 2081 usb_peer_should_wakeup(struct usb_device *udev) 2082 { 2083 return ((udev->power_mode == USB_POWER_MODE_ON) || 2084 (udev->driver_added_refcount != udev->bus->driver_added_refcount) || 2085 (udev->re_enumerate_wait != 0) || 2086 (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) || 2087 (udev->pwr_save.write_refs != 0) || 2088 ((udev->pwr_save.read_refs != 0) && 2089 (udev->flags.usb_mode == USB_MODE_HOST) && 2090 (usb_peer_can_wakeup(udev) == 0))); 2091 } 2092 2093 /*------------------------------------------------------------------------* 2094 * usb_bus_powerd 2095 * 2096 * This function implements the USB power daemon and is called 2097 * regularly from the USB explore thread. 2098 *------------------------------------------------------------------------*/ 2099 #if USB_HAVE_POWERD 2100 void 2101 usb_bus_powerd(struct usb_bus *bus) 2102 { 2103 struct usb_device *udev; 2104 usb_ticks_t temp; 2105 usb_ticks_t limit; 2106 usb_ticks_t mintime; 2107 usb_size_t type_refs[5]; 2108 uint8_t x; 2109 2110 limit = usb_power_timeout; 2111 if (limit == 0) 2112 limit = hz; 2113 else if (limit > 255) 2114 limit = 255 * hz; 2115 else 2116 limit = limit * hz; 2117 2118 DPRINTF("bus=%p\n", bus); 2119 2120 USB_BUS_LOCK(bus); 2121 2122 /* 2123 * The root HUB device is never suspended 2124 * and we simply skip it. 2125 */ 2126 for (x = USB_ROOT_HUB_ADDR + 1; 2127 x != bus->devices_max; x++) { 2128 2129 udev = bus->devices[x]; 2130 if (udev == NULL) 2131 continue; 2132 2133 temp = ticks - udev->pwr_save.last_xfer_time; 2134 2135 if (usb_peer_should_wakeup(udev)) { 2136 /* check if we are suspended */ 2137 if (udev->flags.self_suspended != 0) { 2138 USB_BUS_UNLOCK(bus); 2139 usb_dev_resume_peer(udev); 2140 USB_BUS_LOCK(bus); 2141 } 2142 } else if ((temp >= limit) && 2143 (udev->flags.usb_mode == USB_MODE_HOST) && 2144 (udev->flags.self_suspended == 0)) { 2145 /* try to do suspend */ 2146 2147 USB_BUS_UNLOCK(bus); 2148 usb_dev_suspend_peer(udev); 2149 USB_BUS_LOCK(bus); 2150 } 2151 } 2152 2153 /* reset counters */ 2154 2155 mintime = 0 - 1; 2156 type_refs[0] = 0; 2157 type_refs[1] = 0; 2158 type_refs[2] = 0; 2159 type_refs[3] = 0; 2160 type_refs[4] = 0; 2161 2162 /* Re-loop all the devices to get the actual state */ 2163 2164 for (x = USB_ROOT_HUB_ADDR + 1; 2165 x != bus->devices_max; x++) { 2166 2167 udev = bus->devices[x]; 2168 if (udev == NULL) 2169 continue; 2170 2171 /* we found a non-Root-Hub USB device */ 2172 type_refs[4] += 1; 2173 2174 /* "last_xfer_time" can be updated by a resume */ 2175 temp = ticks - udev->pwr_save.last_xfer_time; 2176 2177 /* 2178 * Compute minimum time since last transfer for the complete 2179 * bus: 2180 */ 2181 if (temp < mintime) 2182 mintime = temp; 2183 2184 if (udev->flags.self_suspended == 0) { 2185 type_refs[0] += udev->pwr_save.type_refs[0]; 2186 type_refs[1] += udev->pwr_save.type_refs[1]; 2187 type_refs[2] += udev->pwr_save.type_refs[2]; 2188 type_refs[3] += udev->pwr_save.type_refs[3]; 2189 } 2190 } 2191 2192 if (mintime >= (1 * hz)) { 2193 /* recompute power masks */ 2194 DPRINTF("Recomputing power masks\n"); 2195 bus->hw_power_state = 0; 2196 if (type_refs[UE_CONTROL] != 0) 2197 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2198 if (type_refs[UE_BULK] != 0) 2199 bus->hw_power_state |= USB_HW_POWER_BULK; 2200 if (type_refs[UE_INTERRUPT] != 0) 2201 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2202 if (type_refs[UE_ISOCHRONOUS] != 0) 2203 bus->hw_power_state |= USB_HW_POWER_ISOC; 2204 if (type_refs[4] != 0) 2205 bus->hw_power_state |= USB_HW_POWER_NON_ROOT_HUB; 2206 } 2207 USB_BUS_UNLOCK(bus); 2208 2209 if (bus->methods->set_hw_power != NULL) { 2210 /* always update hardware power! */ 2211 (bus->methods->set_hw_power) (bus); 2212 } 2213 return; 2214 } 2215 #endif 2216 2217 /*------------------------------------------------------------------------* 2218 * usb_dev_resume_peer 2219 * 2220 * This function will resume an USB peer and do the required USB 2221 * signalling to get an USB device out of the suspended state. 2222 *------------------------------------------------------------------------*/ 2223 static void 2224 usb_dev_resume_peer(struct usb_device *udev) 2225 { 2226 struct usb_bus *bus; 2227 int err; 2228 2229 /* be NULL safe */ 2230 if (udev == NULL) 2231 return; 2232 2233 /* check if already resumed */ 2234 if (udev->flags.self_suspended == 0) 2235 return; 2236 2237 /* we need a parent HUB to do resume */ 2238 if (udev->parent_hub == NULL) 2239 return; 2240 2241 DPRINTF("udev=%p\n", udev); 2242 2243 if ((udev->flags.usb_mode == USB_MODE_DEVICE) && 2244 (udev->flags.remote_wakeup == 0)) { 2245 /* 2246 * If the host did not set the remote wakeup feature, we can 2247 * not wake it up either! 2248 */ 2249 DPRINTF("remote wakeup is not set!\n"); 2250 return; 2251 } 2252 /* get bus pointer */ 2253 bus = udev->bus; 2254 2255 /* resume parent hub first */ 2256 usb_dev_resume_peer(udev->parent_hub); 2257 2258 /* reduce chance of instant resume failure by waiting a little bit */ 2259 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2260 2261 if (usb_device_20_compatible(udev)) { 2262 /* resume current port (Valid in Host and Device Mode) */ 2263 err = usbd_req_clear_port_feature(udev->parent_hub, 2264 NULL, udev->port_no, UHF_PORT_SUSPEND); 2265 if (err) { 2266 DPRINTFN(0, "Resuming port failed\n"); 2267 return; 2268 } 2269 } else { 2270 /* resume current port (Valid in Host and Device Mode) */ 2271 err = usbd_req_set_port_link_state(udev->parent_hub, 2272 NULL, udev->port_no, UPS_PORT_LS_U0); 2273 if (err) { 2274 DPRINTFN(0, "Resuming port failed\n"); 2275 return; 2276 } 2277 } 2278 2279 /* resume settle time */ 2280 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2281 2282 if (bus->methods->device_resume != NULL) { 2283 /* resume USB device on the USB controller */ 2284 (bus->methods->device_resume) (udev); 2285 } 2286 USB_BUS_LOCK(bus); 2287 /* set that this device is now resumed */ 2288 udev->flags.self_suspended = 0; 2289 #if USB_HAVE_POWERD 2290 /* make sure that we don't go into suspend right away */ 2291 udev->pwr_save.last_xfer_time = ticks; 2292 2293 /* make sure the needed power masks are on */ 2294 if (udev->pwr_save.type_refs[UE_CONTROL] != 0) 2295 bus->hw_power_state |= USB_HW_POWER_CONTROL; 2296 if (udev->pwr_save.type_refs[UE_BULK] != 0) 2297 bus->hw_power_state |= USB_HW_POWER_BULK; 2298 if (udev->pwr_save.type_refs[UE_INTERRUPT] != 0) 2299 bus->hw_power_state |= USB_HW_POWER_INTERRUPT; 2300 if (udev->pwr_save.type_refs[UE_ISOCHRONOUS] != 0) 2301 bus->hw_power_state |= USB_HW_POWER_ISOC; 2302 #endif 2303 USB_BUS_UNLOCK(bus); 2304 2305 if (bus->methods->set_hw_power != NULL) { 2306 /* always update hardware power! */ 2307 (bus->methods->set_hw_power) (bus); 2308 } 2309 2310 usbd_sr_lock(udev); 2311 2312 /* notify all sub-devices about resume */ 2313 err = usb_suspend_resume(udev, 0); 2314 2315 usbd_sr_unlock(udev); 2316 2317 /* check if peer has wakeup capability */ 2318 if (usb_peer_can_wakeup(udev)) { 2319 /* clear remote wakeup */ 2320 err = usbd_req_clear_device_feature(udev, 2321 NULL, UF_DEVICE_REMOTE_WAKEUP); 2322 if (err) { 2323 DPRINTFN(0, "Clearing device " 2324 "remote wakeup failed: %s\n", 2325 usbd_errstr(err)); 2326 } 2327 } 2328 } 2329 2330 /*------------------------------------------------------------------------* 2331 * usb_dev_suspend_peer 2332 * 2333 * This function will suspend an USB peer and do the required USB 2334 * signalling to get an USB device into the suspended state. 2335 *------------------------------------------------------------------------*/ 2336 static void 2337 usb_dev_suspend_peer(struct usb_device *udev) 2338 { 2339 struct usb_device *child; 2340 int err; 2341 uint8_t x; 2342 uint8_t nports; 2343 2344 repeat: 2345 /* be NULL safe */ 2346 if (udev == NULL) 2347 return; 2348 2349 /* check if already suspended */ 2350 if (udev->flags.self_suspended) 2351 return; 2352 2353 /* we need a parent HUB to do suspend */ 2354 if (udev->parent_hub == NULL) 2355 return; 2356 2357 DPRINTF("udev=%p\n", udev); 2358 2359 /* check if the current device is a HUB */ 2360 if (udev->hub != NULL) { 2361 nports = udev->hub->nports; 2362 2363 /* check if all devices on the HUB are suspended */ 2364 for (x = 0; x != nports; x++) { 2365 child = usb_bus_port_get_device(udev->bus, 2366 udev->hub->ports + x); 2367 2368 if (child == NULL) 2369 continue; 2370 2371 if (child->flags.self_suspended) 2372 continue; 2373 2374 DPRINTFN(1, "Port %u is busy on the HUB!\n", x + 1); 2375 return; 2376 } 2377 } 2378 2379 if (usb_peer_can_wakeup(udev)) { 2380 /* 2381 * This request needs to be done before we set 2382 * "udev->flags.self_suspended": 2383 */ 2384 2385 /* allow device to do remote wakeup */ 2386 err = usbd_req_set_device_feature(udev, 2387 NULL, UF_DEVICE_REMOTE_WAKEUP); 2388 if (err) { 2389 DPRINTFN(0, "Setting device " 2390 "remote wakeup failed\n"); 2391 } 2392 } 2393 2394 USB_BUS_LOCK(udev->bus); 2395 /* 2396 * Checking for suspend condition and setting suspended bit 2397 * must be atomic! 2398 */ 2399 err = usb_peer_should_wakeup(udev); 2400 if (err == 0) { 2401 /* 2402 * Set that this device is suspended. This variable 2403 * must be set before calling USB controller suspend 2404 * callbacks. 2405 */ 2406 udev->flags.self_suspended = 1; 2407 } 2408 USB_BUS_UNLOCK(udev->bus); 2409 2410 if (err != 0) { 2411 if (usb_peer_can_wakeup(udev)) { 2412 /* allow device to do remote wakeup */ 2413 err = usbd_req_clear_device_feature(udev, 2414 NULL, UF_DEVICE_REMOTE_WAKEUP); 2415 if (err) { 2416 DPRINTFN(0, "Setting device " 2417 "remote wakeup failed\n"); 2418 } 2419 } 2420 2421 if (udev->flags.usb_mode == USB_MODE_DEVICE) { 2422 /* resume parent HUB first */ 2423 usb_dev_resume_peer(udev->parent_hub); 2424 2425 /* reduce chance of instant resume failure by waiting a little bit */ 2426 usb_pause_mtx(NULL, USB_MS_TO_TICKS(20)); 2427 2428 /* resume current port (Valid in Host and Device Mode) */ 2429 err = usbd_req_clear_port_feature(udev->parent_hub, 2430 NULL, udev->port_no, UHF_PORT_SUSPEND); 2431 2432 /* resume settle time */ 2433 usb_pause_mtx(NULL, USB_MS_TO_TICKS(USB_PORT_RESUME_DELAY)); 2434 } 2435 DPRINTF("Suspend was cancelled!\n"); 2436 return; 2437 } 2438 2439 usbd_sr_lock(udev); 2440 2441 /* notify all sub-devices about suspend */ 2442 err = usb_suspend_resume(udev, 1); 2443 2444 usbd_sr_unlock(udev); 2445 2446 if (udev->bus->methods->device_suspend != NULL) { 2447 usb_timeout_t temp; 2448 2449 /* suspend device on the USB controller */ 2450 (udev->bus->methods->device_suspend) (udev); 2451 2452 /* do DMA delay */ 2453 temp = usbd_get_dma_delay(udev); 2454 if (temp != 0) 2455 usb_pause_mtx(NULL, USB_MS_TO_TICKS(temp)); 2456 2457 } 2458 2459 if (usb_device_20_compatible(udev)) { 2460 /* suspend current port */ 2461 err = usbd_req_set_port_feature(udev->parent_hub, 2462 NULL, udev->port_no, UHF_PORT_SUSPEND); 2463 if (err) { 2464 DPRINTFN(0, "Suspending port failed\n"); 2465 return; 2466 } 2467 } else { 2468 /* suspend current port */ 2469 err = usbd_req_set_port_link_state(udev->parent_hub, 2470 NULL, udev->port_no, UPS_PORT_LS_U3); 2471 if (err) { 2472 DPRINTFN(0, "Suspending port failed\n"); 2473 return; 2474 } 2475 } 2476 2477 udev = udev->parent_hub; 2478 goto repeat; 2479 } 2480 2481 /*------------------------------------------------------------------------* 2482 * usbd_set_power_mode 2483 * 2484 * This function will set the power mode, see USB_POWER_MODE_XXX for a 2485 * USB device. 2486 *------------------------------------------------------------------------*/ 2487 void 2488 usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode) 2489 { 2490 /* filter input argument */ 2491 if ((power_mode != USB_POWER_MODE_ON) && 2492 (power_mode != USB_POWER_MODE_OFF)) 2493 power_mode = USB_POWER_MODE_SAVE; 2494 2495 power_mode = usbd_filter_power_mode(udev, power_mode); 2496 2497 udev->power_mode = power_mode; /* update copy of power mode */ 2498 2499 #if USB_HAVE_POWERD 2500 usb_bus_power_update(udev->bus); 2501 #endif 2502 } 2503 2504 /*------------------------------------------------------------------------* 2505 * usbd_filter_power_mode 2506 * 2507 * This function filters the power mode based on hardware requirements. 2508 *------------------------------------------------------------------------*/ 2509 uint8_t 2510 usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode) 2511 { 2512 struct usb_bus_methods *mtod; 2513 int8_t temp; 2514 2515 mtod = udev->bus->methods; 2516 temp = -1; 2517 2518 if (mtod->get_power_mode != NULL) 2519 (mtod->get_power_mode) (udev, &temp); 2520 2521 /* check if we should not filter */ 2522 if (temp < 0) 2523 return (power_mode); 2524 2525 /* use fixed power mode given by hardware driver */ 2526 return (temp); 2527 } 2528 2529 /*------------------------------------------------------------------------* 2530 * usbd_start_re_enumerate 2531 * 2532 * This function starts re-enumeration of the given USB device. This 2533 * function does not need to be called BUS-locked. This function does 2534 * not wait until the re-enumeration is completed. 2535 *------------------------------------------------------------------------*/ 2536 void 2537 usbd_start_re_enumerate(struct usb_device *udev) 2538 { 2539 if (udev->re_enumerate_wait == 0) { 2540 udev->re_enumerate_wait = 1; 2541 usb_needs_explore(udev->bus, 0); 2542 } 2543 } 2544