1 /*- 2 * Copyright (c) 1990, 1991, 1993 3 * The Regents of the University of California. All rights reserved. 4 * 5 * This code is derived from the Stanford/CMU enet packet filter, 6 * (net/enet.c) distributed as part of 4.3BSD, and code contributed 7 * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence 8 * Berkeley Laboratory. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 4. Neither the name of the University nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 */ 34 35 #include <sys/param.h> 36 #include <sys/kernel.h> 37 #include <sys/bus.h> 38 #include <sys/fcntl.h> 39 #include <sys/malloc.h> 40 #include <sys/proc.h> 41 #include <sys/socket.h> 42 #include <sys/sockio.h> 43 #include <net/if.h> 44 #include <net/if_types.h> 45 #include <net/bpf.h> 46 #include <sys/sysctl.h> 47 #include <sys/condvar.h> 48 49 #include <bus/u4b/usb.h> 50 #include <bus/u4b/usbdi.h> 51 #include <bus/u4b/usb_busdma.h> 52 #include <bus/u4b/usb_controller.h> 53 #include <bus/u4b/usb_core.h> 54 #include <bus/u4b/usb_process.h> 55 #include <bus/u4b/usb_device.h> 56 #include <bus/u4b/usb_bus.h> 57 #include <bus/u4b/usb_pf.h> 58 #include <bus/u4b/usb_transfer.h> 59 60 static int usb_no_pf; 61 62 SYSCTL_INT(_hw_usb, OID_AUTO, no_pf, CTLFLAG_RW, 63 &usb_no_pf, 0, "Set to disable USB packet filtering"); 64 65 TUNABLE_INT("hw.usb.no_pf", &usb_no_pf); 66 67 void 68 usbpf_attach(struct usb_bus *ubus) 69 { 70 struct ifnet *ifp; 71 72 if (usb_no_pf != 0) { 73 ubus->ifp = NULL; 74 return; 75 } 76 77 ifp = ubus->ifp = if_alloc(IFT_USB); 78 if (ifp == NULL) { 79 device_printf(ubus->parent, "usbpf: Could not allocate " 80 "instance\n"); 81 return; 82 } 83 84 if_initname(ifp, "usbus", device_get_unit(ubus->bdev)); 85 ifp->if_flags = IFF_CANTCONFIG; 86 if_attach(ifp); 87 if_up(ifp); 88 89 /* 90 * XXX According to the specification of DLT_USB, it indicates 91 * packets beginning with USB setup header. But not sure all 92 * packets would be. 93 */ 94 bpfattach(ifp, DLT_USB, USBPF_HDR_LEN); 95 96 if (bootverbose) 97 device_printf(ubus->parent, "usbpf: Attached\n"); 98 } 99 100 void 101 usbpf_detach(struct usb_bus *ubus) 102 { 103 struct ifnet *ifp = ubus->ifp; 104 105 if (ifp != NULL) { 106 bpfdetach(ifp); 107 if_down(ifp); 108 if_detach(ifp); 109 if_free(ifp); 110 } 111 ubus->ifp = NULL; 112 } 113 114 static uint32_t 115 usbpf_aggregate_xferflags(struct usb_xfer_flags *flags) 116 { 117 uint32_t val = 0; 118 119 if (flags->force_short_xfer == 1) 120 val |= USBPF_FLAG_FORCE_SHORT_XFER; 121 if (flags->short_xfer_ok == 1) 122 val |= USBPF_FLAG_SHORT_XFER_OK; 123 if (flags->short_frames_ok == 1) 124 val |= USBPF_FLAG_SHORT_FRAMES_OK; 125 if (flags->pipe_bof == 1) 126 val |= USBPF_FLAG_PIPE_BOF; 127 if (flags->proxy_buffer == 1) 128 val |= USBPF_FLAG_PROXY_BUFFER; 129 if (flags->ext_buffer == 1) 130 val |= USBPF_FLAG_EXT_BUFFER; 131 if (flags->manual_status == 1) 132 val |= USBPF_FLAG_MANUAL_STATUS; 133 if (flags->no_pipe_ok == 1) 134 val |= USBPF_FLAG_NO_PIPE_OK; 135 if (flags->stall_pipe == 1) 136 val |= USBPF_FLAG_STALL_PIPE; 137 return (val); 138 } 139 140 static uint32_t 141 usbpf_aggregate_status(struct usb_xfer_flags_int *flags) 142 { 143 uint32_t val = 0; 144 145 if (flags->open == 1) 146 val |= USBPF_STATUS_OPEN; 147 if (flags->transferring == 1) 148 val |= USBPF_STATUS_TRANSFERRING; 149 if (flags->did_dma_delay == 1) 150 val |= USBPF_STATUS_DID_DMA_DELAY; 151 if (flags->did_close == 1) 152 val |= USBPF_STATUS_DID_CLOSE; 153 if (flags->draining == 1) 154 val |= USBPF_STATUS_DRAINING; 155 if (flags->started == 1) 156 val |= USBPF_STATUS_STARTED; 157 if (flags->bandwidth_reclaimed == 1) 158 val |= USBPF_STATUS_BW_RECLAIMED; 159 if (flags->control_xfr == 1) 160 val |= USBPF_STATUS_CONTROL_XFR; 161 if (flags->control_hdr == 1) 162 val |= USBPF_STATUS_CONTROL_HDR; 163 if (flags->control_act == 1) 164 val |= USBPF_STATUS_CONTROL_ACT; 165 if (flags->control_stall == 1) 166 val |= USBPF_STATUS_CONTROL_STALL; 167 if (flags->short_frames_ok == 1) 168 val |= USBPF_STATUS_SHORT_FRAMES_OK; 169 if (flags->short_xfer_ok == 1) 170 val |= USBPF_STATUS_SHORT_XFER_OK; 171 #if USB_HAVE_BUSDMA 172 if (flags->bdma_enable == 1) 173 val |= USBPF_STATUS_BDMA_ENABLE; 174 if (flags->bdma_no_post_sync == 1) 175 val |= USBPF_STATUS_BDMA_NO_POST_SYNC; 176 if (flags->bdma_setup == 1) 177 val |= USBPF_STATUS_BDMA_SETUP; 178 #endif 179 if (flags->isochronous_xfr == 1) 180 val |= USBPF_STATUS_ISOCHRONOUS_XFR; 181 if (flags->curr_dma_set == 1) 182 val |= USBPF_STATUS_CURR_DMA_SET; 183 if (flags->can_cancel_immed == 1) 184 val |= USBPF_STATUS_CAN_CANCEL_IMMED; 185 if (flags->doing_callback == 1) 186 val |= USBPF_STATUS_DOING_CALLBACK; 187 188 return (val); 189 } 190 191 static int 192 usbpf_xfer_frame_is_read(struct usb_xfer *xfer, uint32_t frame) 193 { 194 int isread; 195 196 if ((frame == 0) && (xfer->flags_int.control_xfr != 0) && 197 (xfer->flags_int.control_hdr != 0)) { 198 /* special case */ 199 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) { 200 /* The device controller writes to memory */ 201 isread = 1; 202 } else { 203 /* The host controller reads from memory */ 204 isread = 0; 205 } 206 } else { 207 isread = USB_GET_DATA_ISREAD(xfer); 208 } 209 return (isread); 210 } 211 212 static uint32_t 213 usbpf_xfer_precompute_size(struct usb_xfer *xfer, int type) 214 { 215 uint32_t totlen; 216 uint32_t x; 217 uint32_t nframes; 218 219 if (type == USBPF_XFERTAP_SUBMIT) 220 nframes = xfer->nframes; 221 else 222 nframes = xfer->aframes; 223 224 totlen = USBPF_HDR_LEN + (USBPF_FRAME_HDR_LEN * nframes); 225 226 /* precompute all trace lengths */ 227 for (x = 0; x != nframes; x++) { 228 if (usbpf_xfer_frame_is_read(xfer, x)) { 229 if (type != USBPF_XFERTAP_SUBMIT) { 230 totlen += USBPF_FRAME_ALIGN( 231 xfer->frlengths[x]); 232 } 233 } else { 234 if (type == USBPF_XFERTAP_SUBMIT) { 235 totlen += USBPF_FRAME_ALIGN( 236 xfer->frlengths[x]); 237 } 238 } 239 } 240 return (totlen); 241 } 242 243 void 244 usbpf_xfertap(struct usb_xfer *xfer, int type) 245 { 246 struct usb_bus *bus; 247 struct usbpf_pkthdr *up; 248 struct usbpf_framehdr *uf; 249 usb_frlength_t offset; 250 uint32_t totlen; 251 uint32_t frame; 252 uint32_t temp; 253 uint32_t nframes; 254 uint32_t x; 255 uint8_t *buf; 256 uint8_t *ptr; 257 258 bus = xfer->xroot->bus; 259 260 /* sanity checks */ 261 if (usb_no_pf != 0) 262 return; 263 if (bus->ifp == NULL) 264 return; 265 if (!bpf_peers_present(bus->ifp->if_bpf)) 266 return; 267 268 totlen = usbpf_xfer_precompute_size(xfer, type); 269 270 if (type == USBPF_XFERTAP_SUBMIT) 271 nframes = xfer->nframes; 272 else 273 nframes = xfer->aframes; 274 275 /* 276 * XXX TODO XXX 277 * 278 * When BPF supports it we could pass a fragmented array of 279 * buffers avoiding the data copy operation here. 280 */ 281 buf = ptr = malloc(totlen, M_TEMP, M_NOWAIT); 282 if (buf == NULL) { 283 device_printf(bus->parent, "usbpf: Out of memory\n"); 284 return; 285 } 286 287 up = (struct usbpf_pkthdr *)ptr; 288 ptr += USBPF_HDR_LEN; 289 290 /* fill out header */ 291 temp = device_get_unit(bus->bdev); 292 up->up_totlen = htole32(totlen); 293 up->up_busunit = htole32(temp); 294 up->up_address = xfer->xroot->udev->device_index; 295 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) 296 up->up_mode = USBPF_MODE_DEVICE; 297 else 298 up->up_mode = USBPF_MODE_HOST; 299 up->up_type = type; 300 up->up_xfertype = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE; 301 temp = usbpf_aggregate_xferflags(&xfer->flags); 302 up->up_flags = htole32(temp); 303 temp = usbpf_aggregate_status(&xfer->flags_int); 304 up->up_status = htole32(temp); 305 temp = xfer->error; 306 up->up_error = htole32(temp); 307 temp = xfer->interval; 308 up->up_interval = htole32(temp); 309 up->up_frames = htole32(nframes); 310 temp = xfer->max_packet_size; 311 up->up_packet_size = htole32(temp); 312 temp = xfer->max_packet_count; 313 up->up_packet_count = htole32(temp); 314 temp = xfer->endpointno; 315 up->up_endpoint = htole32(temp); 316 up->up_speed = xfer->xroot->udev->speed; 317 318 /* clear reserved area */ 319 memset(up->up_reserved, 0, sizeof(up->up_reserved)); 320 321 /* init offset and frame */ 322 offset = 0; 323 frame = 0; 324 325 /* iterate all the USB frames and copy data, if any */ 326 for (x = 0; x != nframes; x++) { 327 uint32_t length; 328 int isread; 329 330 /* get length */ 331 length = xfer->frlengths[x]; 332 333 /* get frame header pointer */ 334 uf = (struct usbpf_framehdr *)ptr; 335 ptr += USBPF_FRAME_HDR_LEN; 336 337 /* fill out packet header */ 338 uf->length = htole32(length); 339 uf->flags = 0; 340 341 /* get information about data read/write */ 342 isread = usbpf_xfer_frame_is_read(xfer, x); 343 344 /* check if we need to copy any data */ 345 if (isread) { 346 if (type == USBPF_XFERTAP_SUBMIT) 347 length = 0; 348 else { 349 uf->flags |= htole32( 350 USBPF_FRAMEFLAG_DATA_FOLLOWS); 351 } 352 } else { 353 if (type != USBPF_XFERTAP_SUBMIT) 354 length = 0; 355 else { 356 uf->flags |= htole32( 357 USBPF_FRAMEFLAG_DATA_FOLLOWS); 358 } 359 } 360 361 /* check if data is read direction */ 362 if (isread) 363 uf->flags |= htole32(USBPF_FRAMEFLAG_READ); 364 365 /* copy USB data, if any */ 366 if (length != 0) { 367 /* copy data */ 368 usbd_copy_out(&xfer->frbuffers[frame], 369 offset, ptr, length); 370 371 /* align length */ 372 temp = USBPF_FRAME_ALIGN(length); 373 374 /* zero pad */ 375 if (temp != length) 376 memset(ptr + length, 0, temp - length); 377 378 ptr += temp; 379 } 380 381 if (xfer->flags_int.isochronous_xfr) { 382 offset += usbd_xfer_old_frame_length(xfer, x); 383 } else { 384 frame ++; 385 } 386 } 387 388 bpf_tap(bus->ifp->if_bpf, buf, totlen); 389 390 free(buf, M_TEMP); 391 } 392