1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h # Debugging levels: 35 # 0 - quiet, only emit warnings 36 # 1 - noisy, emit major function 37 # points and things done 38 # 2 - noisier, emit trace items 39 # in loops, etc. 40 # 3 - even more noisy, more function 41 # points 42 # 4 - noisiest 43 44# Adaptec aic7xxx SCSI controller options 45AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 46 # mapped I/O 47 48AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 49 # targetmode operations. 50 51AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 52 # configuration prom. 53 54AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 55 56AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 57 # See sys/dev/aic7xxx/aic7xxx.h 58 59AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 60 # output. Adds ~15k to driver. 61 62# Adaptec aic79xx SCSI controller options 63AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 64 65AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 66 # See sys/dev/aic7xxx/aic79xx.h 67 68AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 69 # targetmode operations. 70 71AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 72 # output. Adds ~15k to driver. 73 74ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 75 # mapped I/O 76TWA_DEBUG opt_twa.h 77 78#options for ACPI support 79ACPI_DEBUG opt_acpi.h 80ACPI_NO_SEMAPHORES opt_acpi.h 81ACPI_ENABLE_PCI opt_acpi.h 82 83# Miscellaneous options. 84COMPAT_DF12 opt_compatdf12.h 85COMPAT_43 opt_compat.h 86COMPAT_SUNOS opt_compat.h 87COMPILING_LINT opt_lint.h 88DDB 89DDB_TRACE 90DDB_UNATTENDED opt_ddb.h 91GDB_REMOTE_CHAT opt_ddb.h 92HW_WDOG 93KTRACE 94LIBICONV 95MD_NSECT opt_md.h 96MD_ROOT opt_md.h 97MD_ROOT_SIZE opt_md.h 98MFI_DEBUG opt_mfi.h 99NSWAPDEV opt_swap.h 100NSWBUF_MIN opt_swap.h 101PPS_SYNC opt_ntp.h 102QUOTA 103SUIDDIR opt_suiddir.h 104SYSVMSG opt_sysvipc.h 105SYSVSEM opt_sysvipc.h 106SYSVSHM opt_sysvipc.h 107SHMALL opt_sysvipc.h 108SHMMAX opt_sysvipc.h 109SHMMAXPGS opt_sysvipc.h 110SHMMIN opt_sysvipc.h 111SHMMNI opt_sysvipc.h 112SHMSEG opt_sysvipc.h 113SEMMAP opt_sysvipc.h 114SEMMNI opt_sysvipc.h 115SEMMNS opt_sysvipc.h 116SEMMNU opt_sysvipc.h 117SEMMSL opt_sysvipc.h 118SEMOPM opt_sysvipc.h 119SEMUME opt_sysvipc.h 120MSGMNB opt_sysvipc.h 121MSGMNI opt_sysvipc.h 122MSGSEG opt_sysvipc.h 123MSGSSZ opt_sysvipc.h 124MSGTQL opt_sysvipc.h 125UCONSOLE 126ICMP_BANDLIM 127SHOW_BUSYBUFS 128VFS_AIO 129DIRECTIO opt_directio.h 130 131# POSIX kernel options 132P1003_1B opt_posix.h 133_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 134_KPOSIX_VERSION opt_posix.h 135 136# Do we want the config file compiled into the kernel? 137INCLUDE_CONFIG_FILE opt_config.h 138 139# Options for static file systems. These should only be used at config 140# time, since the corresponding lkms cannot work if there are any static 141# dependencies. Unusability is enforced by hiding the defines for the 142# options in a never-included header. 143EXT2FS opt_dontuse.h 144FDESC opt_dontuse.h 145HPFS opt_dontuse.h 146MFS opt_dontuse.h 147MSDOSFS opt_dontuse.h 148NULLFS opt_dontuse.h 149PORTAL opt_dontuse.h 150PROCFS opt_dontuse.h 151UDF opt_dontuse.h 152NTFS opt_dontuse.h 153#TMPFS opt_dontuse.h 154 155# These static filesystems has one slightly bogus static dependency in 156# sys/platform/.../i386/autoconf.c. If any of these filesystems are 157# statically compiled into the kernel, code for mounting them as root 158# filesystems will be enabled - but look below. Boot-code is purposely 159# unavailable for the LKM-based versions. 160CD9660 161FFS 162NFS 163NWFS 164USERFS 165TMPFS 166HAMMER 167 168# filesystems and libiconv bridge 169CD9660_ICONV opt_dontuse.h 170MSDOSFS_ICONV opt_dontuse.h 171NTFS_ICONV opt_dontuse.h 172 173# If you are following the conditions in the copyright, 174# you can enable soft-updates which will speed up a lot of things 175# and make the system safer from crashes at the same time. 176# otherwise a STUB module will be compiled in. 177SOFTUPDATES opt_ffs.h 178 179# Enable fast hash lookups for large directories on UFS-based filesystems. 180UFS_DIRHASH opt_ufs.h 181 182# The above static dependencies are planned removed, with a 183# <filesystem>_ROOT option to control if it usable as root. This list 184# allows these options to be present in config files already (though 185# they won't make any difference yet). 186FFS_ROOT opt_ffs.h 187NFS_ROOT opt_nfsroot.h 188 189# The union static file system has bogus static dependencies, so it isn't 190# hidden yet. 191UNION 192 193# Options used only in subr_param.c. 194HZ opt_param.h 195MAXFILES opt_param.h 196NBUF opt_param.h 197NMBCLUSTERS opt_param.h 198NMBUFS opt_param.h 199VM_BCACHE_SIZE_MAX opt_param.h 200VM_SWZONE_SIZE_MAX opt_param.h 201MAXUSERS 202DFLDSIZ opt_param.h 203MAXDSIZ opt_param.h 204MAXSSIZ opt_param.h 205 206# Generic SCSI options. 207CAM_MAX_HIGHPOWER opt_cam.h 208CAMDEBUG opt_cam.h 209CAM_DEBUG_DELAY opt_cam.h 210CAM_DEBUG_BUS opt_cam.h 211CAM_DEBUG_TARGET opt_cam.h 212CAM_DEBUG_LUN opt_cam.h 213CAM_DEBUG_FLAGS opt_cam.h 214SCSI_DELAY opt_scsi.h 215SCSI_NO_SENSE_STRINGS opt_scsi.h 216SCSI_NO_OP_STRINGS opt_scsi.h 217 218# iSCSI options 219ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 220 221# Options used only in cam/scsi/scsi_cd.c 222CHANGER_MIN_BUSY_SECONDS opt_cd.h 223CHANGER_MAX_BUSY_SECONDS opt_cd.h 224 225# Options used only in cam/scsi/scsi_sa.c. 226SA_IO_TIMEOUT opt_sa.h 227SA_SPACE_TIMEOUT opt_sa.h 228SA_REWIND_TIMEOUT opt_sa.h 229SA_ERASE_TIMEOUT opt_sa.h 230SA_1FM_AT_EOD opt_sa.h 231 232# Options used only in cam/scsi/scsi_pt.c 233SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 234 235# Options used only in cam/scsi/scsi_ses.c 236SES_ENABLE_PASSTHROUGH opt_ses.h 237 238# Options used in dev/sym/ (Symbios SCSI driver). 239SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 240 # Allows the ncr to take precedence 241 # 1 (1<<0) -> 810a, 860 242 # 2 (1<<1) -> 825a, 875, 885, 895 243 # 4 (1<<2) -> 895a, 896, 1510d 244SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 245 # disabled:0 (default), enabled:1 246SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 247 # disabled:0, enabled:1 (default) 248SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 249 # default:8, range:[1..64] 250 251# Options used only in pci/ncr.c 252SCSI_NCR_DEBUG opt_ncr.h 253SCSI_NCR_MAX_SYNC opt_ncr.h 254SCSI_NCR_MAX_WIDE opt_ncr.h 255SCSI_NCR_MYADDR opt_ncr.h 256 257# Options used only in pci/isp_pci.c 258ISP_TARGET_MODE opt_isp.h 259 260# Options used in the 'ata' ATA/ATAPI driver 261ATA_STATIC_ID opt_ata.h 262 263# Net stuff. 264# altq stuff 265ALTQ opt_global.h 266ALTQ_CBQ opt_altq.h 267ALTQ_RED opt_altq.h 268ALTQ_RIO opt_altq.h 269ALTQ_HFSC opt_altq.h 270ALTQ_PRIQ opt_altq.h 271ALTQ_FAIRQ opt_altq.h 272ALTQ_NOPCC opt_altq.h 273ALTQ_DEBUG opt_altq.h 274 275ACCEPT_FILTER_DATA 276ACCEPT_FILTER_HTTP 277BOOTP opt_bootp.h 278BOOTP_COMPAT opt_bootp.h 279BOOTP_NFSROOT opt_bootp.h 280BOOTP_NFSV3 opt_bootp.h 281BOOTP_WIRED_TO opt_bootp.h 282CARP opt_carp.h 283ETHER_II opt_ef.h 284ETHER_8023 opt_ef.h 285ETHER_8022 opt_ef.h 286ETHER_SNAP opt_ef.h 287MROUTING opt_mrouting.h 288PIM opt_mrouting.h 289INET opt_inet.h 290INET6 opt_inet6.h 291IPSEC opt_ipsec.h 292IPSEC_ESP opt_ipsec.h 293IPSEC_DEBUG opt_ipsec.h 294IPSEC_FILTERGIF opt_ipsec.h 295FAST_IPSEC opt_ipsec.h 296IPDIVERT 297DUMMYNET opt_ipdn.h 298DUMMYNET_DEBUG opt_ipdn.h 299IPFILTER opt_ipfilter.h 300IPFILTER_LOG opt_ipfilter.h 301IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 302IPFIREWALL opt_ipfw.h 303IPFIREWALL_DEBUG opt_ipfw.h 304IPFIREWALL_VERBOSE opt_ipfw.h 305IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 306IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 307IPFIREWALL_FORWARD opt_ipfw.h 308IPV6FIREWALL opt_ip6fw.h 309IPV6FIREWALL_VERBOSE opt_ip6fw.h 310IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 311IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 312IPSTEALTH 313IPX opt_ipx.h 314IPXIP opt_ipx.h 315IPTUNNEL opt_ipx.h 316LIBMCHAIN 317MPLS opt_mpls.h 318NCP opt_ncp.h 319NETATALK opt_atalk.h 320NS opt_ns.h 321PPP_BSDCOMP opt_ppp.h 322PPP_DEFLATE opt_ppp.h 323PPP_FILTER opt_ppp.h 324SLIP_IFF_OPTS opt_slip.h 325TCPDEBUG 326TCP_SIGNATURE opt_inet.h 327TCP_DROP_SYNFIN opt_tcp_input.h 328 329XBONEHACK 330MBUF_STRESS_TEST opt_mbuf_stress_test.h 331 332# (New netgraph, port still in progress) 333# 334# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 335# Each netgraph node type can be either be compiled into the kernel 336# or loaded dynamically. To get the former, include the corresponding 337# option below. Each type has its own man page, e.g. ng_async(4). 338NETGRAPH7 339NETGRAPH7_DEBUG opt_netgraph.h 340NETGRAPH7_ASYNC opt_netgraph.h 341NETGRAPH7_ATMLLC opt_netgraph.h 342NETGRAPH7_ATM_ATMPIF opt_netgraph.h 343NETGRAPH7_BLUETOOTH opt_netgraph.h 344NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 345NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 346NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 347NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 348NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 349NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 350NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 351NETGRAPH7_BPF opt_netgraph.h 352NETGRAPH7_BRIDGE opt_netgraph.h 353NETGRAPH7_CAR opt_netgraph.h 354NETGRAPH7_CISCO opt_netgraph.h 355NETGRAPH7_DEFLATE opt_netgraph.h 356NETGRAPH7_DEVICE opt_netgraph.h 357NETGRAPH7_ECHO opt_netgraph.h 358NETGRAPH7_EIFACE opt_netgraph.h 359NETGRAPH7_ETHER opt_netgraph.h 360NETGRAPH7_FEC opt_netgraph.h 361NETGRAPH7_FRAME_RELAY opt_netgraph.h 362NETGRAPH7_GIF opt_netgraph.h 363NETGRAPH7_GIF_DEMUX opt_netgraph.h 364NETGRAPH7_HOLE opt_netgraph.h 365NETGRAPH7_IFACE opt_netgraph.h 366NETGRAPH7_IP_INPUT opt_netgraph.h 367NETGRAPH7_IPFW opt_netgraph.h 368NETGRAPH7_KSOCKET opt_netgraph.h 369NETGRAPH7_L2TP opt_netgraph.h 370NETGRAPH7_LMI opt_netgraph.h 371# MPPC compression requires proprietary files (not included) 372NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 373NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 374NETGRAPH7_NAT opt_netgraph.h 375NETGRAPH7_NETFLOW opt_netgraph.h 376NETGRAPH7_ONE2MANY opt_netgraph.h 377NETGRAPH7_PPP opt_netgraph.h 378NETGRAPH7_PPPOE opt_netgraph.h 379NETGRAPH7_PPTPGRE opt_netgraph.h 380NETGRAPH7_PRED1 opt_netgraph.h 381NETGRAPH7_RFC1490 opt_netgraph.h 382NETGRAPH7_SOCKET opt_netgraph.h 383NETGRAPH7_SPLIT opt_netgraph.h 384NETGRAPH7_SPPP opt_netgraph.h 385NETGRAPH7_TAG opt_netgraph.h 386NETGRAPH7_TCPMSS opt_netgraph.h 387NETGRAPH7_TEE opt_netgraph.h 388NETGRAPH7_TTY opt_netgraph.h 389NETGRAPH7_UI opt_netgraph.h 390NETGRAPH7_VJC opt_netgraph.h 391 392# NgATM options 393NGATM7_ATM opt_netgraph.h 394NGATM7_ATMBASE opt_netgraph.h 395NGATM7_SSCOP opt_netgraph.h 396NGATM7_SSCFU opt_netgraph.h 397NGATM7_UNI opt_netgraph.h 398NGATM7_CCATM opt_netgraph.h 399 400# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 401# Each netgraph node type can be either be compiled into the kernel 402# or loaded dynamically. To get the former, include the corresponding 403# option below. Each type has its own man page, e.g. ng_async(8). 404NETGRAPH 405NETGRAPH_ASYNC opt_netgraph.h 406NETGRAPH_BPF opt_netgraph.h 407NETGRAPH_BRIDGE opt_netgraph.h 408NETGRAPH_CISCO opt_netgraph.h 409NETGRAPH_ECHO opt_netgraph.h 410NETGRAPH_EIFACE opt_netgraph.h 411NETGRAPH_ETHER opt_netgraph.h 412NETGRAPH_FRAME_RELAY opt_netgraph.h 413NETGRAPH_HOLE opt_netgraph.h 414NETGRAPH_IFACE opt_netgraph.h 415NETGRAPH_KSOCKET opt_netgraph.h 416NETGRAPH_LMI opt_netgraph.h 417NETGRAPH_L2TP opt_netgraph.h 418# MPPC compression requires proprietary files (not included) 419NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 420NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 421NETGRAPH_ONE2MANY opt_netgraph.h 422NETGRAPH_PPP opt_netgraph.h 423NETGRAPH_PPPOE opt_netgraph.h 424NETGRAPH_PPTPGRE opt_netgraph.h 425NETGRAPH_RFC1490 opt_netgraph.h 426NETGRAPH_SOCKET opt_netgraph.h 427NETGRAPH_TEE opt_netgraph.h 428NETGRAPH_TTY opt_netgraph.h 429NETGRAPH_UI opt_netgraph.h 430NETGRAPH_VJC opt_netgraph.h 431 432# DRM options 433DRM_DEBUG opt_drm.h 434DRM_LINUX opt_drm.h 435 436# ATM (HARP version) 437ATM_CORE opt_atm.h 438ATM_IP opt_atm.h 439ATM_SIGPVC opt_atm.h 440ATM_SPANS opt_atm.h 441ATM_UNI opt_atm.h 442 443# XXX Conflict: # of devices vs network protocol (Native ATM). 444# This makes "atm.h" unusable. 445NATM opt_natm.h 446 447# DPT driver debug flags 448DPT_MEASURE_PERFORMANCE opt_dpt.h 449DPT_HANDLE_TIMEOUTS opt_dpt.h 450DPT_TIMEOUT_FACTOR opt_dpt.h 451DPT_LOST_IRQ opt_dpt.h 452DPT_RESET_HBA opt_dpt.h 453 454# Misc debug flags. Most of these should probably be replaced with 455# 'DEBUG', and then let people recompile just the interesting modules 456# with 'make CC="cc -DDEBUG"'. 457CLUSTERDEBUG opt_debug_cluster.h 458DEBUG_1284 opt_ppb_1284.h 459VP0_DEBUG opt_vpo.h 460LPT_DEBUG opt_lpt.h 461PLIP_DEBUG opt_plip.h 462LOCKF_DEBUG opt_debug_lockf.h 463LOUTB opt_debug_outb.h 464NPX_DEBUG opt_debug_npx.h 465NETATALKDEBUG opt_atalk.h 466SI_DEBUG opt_debug_si.h 467 468# Fb options 469FB_DEBUG opt_fb.h 470FB_INSTALL_CDEV opt_fb.h 471 472# ppbus related options 473PERIPH_1284 opt_ppb_1284.h 474DONTPROBE_1284 opt_ppb_1284.h 475 476# smbus related options 477ENABLE_ALART opt_intpm.h 478 479# These cause changes all over the kernel 480BLKDEV_IOSIZE opt_global.h 481DEBUG opt_global.h 482DEBUG_LOCKS opt_global.h 483DEBUG_CRIT_SECTIONS opt_global.h 484DIAGNOSTIC opt_global.h 485INVARIANTS opt_global.h 486SIMPLELOCK_DEBUG opt_global.h 487VFS_BIO_DEBUG opt_global.h 488DEBUG_INTERRUPTS opt_global.h 489SOCKBUF_DEBUG opt_global.h 490PANIC_DEBUG opt_global.h 491MBUF_DEBUG opt_global.h 492PMAP_DEBUG opt_global.h 493 494# Sample system/interrupt PC 495DEBUG_PCTRACK opt_pctrack.h 496 497# These are VM related options 498NO_SWAPPING opt_vm.h 499PQ_CACHESIZE opt_vmpage.h 500 501# Standard SMP options 502SMP opt_global.h 503 504# sys/netkey 505KEY 506 507# Size of the kernel message buffer 508MSGBUF_SIZE opt_msgbuf.h 509 510# PCI related options 511COMPAT_OLDPCI 512 513# NFS options 514NFS_MINATTRTIMO opt_nfs.h 515NFS_MAXATTRTIMO opt_nfs.h 516NFS_MINDIRATTRTIMO opt_nfs.h 517NFS_MAXDIRATTRTIMO opt_nfs.h 518NFS_GATHERDELAY opt_nfs.h 519NFS_UIDHASHSIZ opt_nfs.h 520NFS_WDELAYHASHSIZ opt_nfs.h 521NFS_MUIDHASHSIZ opt_nfs.h 522NFS_NOSERVER opt_nfs.h 523NFS_DEBUG opt_nfs.h 524 525# MSDOSFS options 526MSDOSFS_DEBUG opt_msdosfs.h 527 528# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 529BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 530BROOKTREE_ALLOC_PAGES opt_bktr.h 531BKTR_OVERRIDE_CARD opt_bktr.h 532BKTR_OVERRIDE_TUNER opt_bktr.h 533BKTR_OVERRIDE_DBX opt_bktr.h 534BKTR_OVERRIDE_MSP opt_bktr.h 535BKTR_SYSTEM_DEFAULT opt_bktr.h 536BKTR_ALLOC_PAGES opt_bktr.h 537BKTR_USE_PLL opt_bktr.h 538BKTR_GPIO_ACCESS opt_bktr.h 539BKTR_NO_MSP_RESET opt_bktr.h 540BKTR_430_FX_MODE opt_bktr.h 541BKTR_SIS_VIA_MODE opt_bktr.h 542BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 543 544# meteor opt_meteor.h 545METEOR_ALLOC_PAGES opt_meteor.h 546METEOR_TEST_VIDEO opt_meteor.h 547METEOR_SYSTEM_DEFAULT opt_meteor.h 548METEOR_DEALLOC_PAGES opt_meteor.h 549METEOR_DEALLOC_ABOVE opt_meteor.h 550 551# Various mi ISA bus flags 552COMPAT_OLDISA opt_compat_oldisa.h 553COM_ESP opt_sio.h 554COM_MULTIPORT opt_sio.h 555BREAK_TO_DEBUGGER opt_comconsole.h 556ALT_BREAK_TO_DEBUGGER opt_comconsole.h 557 558# options for bus/device framework 559BUS_DEBUG opt_bus.h 560 561# options for USB support 562OHCI_DEBUG opt_usb.h 563USB_DEBUG opt_usb.h 564 565# Vinum options 566VINUMDEBUG opt_vinum.h 567 568# Embedded system options 569UKBD_DFLT_KEYMAP opt_ukbd.h 570INIT_PATH opt_init_path.h 571 572ROOTDEVNAME opt_rootdevname.h 573 574FDC_DEBUG opt_fdc.h 575PCFCLOCK_VERBOSE opt_pcfclock.h 576PCFCLOCK_MAX_RETRIES opt_pcfclock.h 577 578# Polling device handling 579DEVICE_POLLING opt_polling.h 580 581# Network device queue based polling 582IFPOLL_ENABLE opt_ifpoll.h 583 584# options for ubsec driver 585UBSEC_DEBUG opt_ubsec.h 586UBSEC_RNDTEST opt_ubsec.h 587UBSEC_NO_RNG opt_ubsec.h 588 589# options for hifn driver 590HIFN_DEBUG opt_hifn.h 591HIFN_RNDTEST opt_hifn.h 592HIFN_NO_RNG opt_hifn.h 593 594# KTR options 595KTR opt_global.h 596KTR_ALL opt_ktr.h 597KTR_TOKENS opt_ktr.h 598KTR_MEMORY opt_ktr.h 599KTR_USB_MEMORY opt_ktr.h 600KTR_IPIQ opt_ktr.h 601KTR_MSGPORT opt_ktr.h 602KTR_ENTRIES opt_global.h 603KTR_VERBOSE opt_ktr.h 604KTR_SPIN_CONTENTION opt_ktr.h 605KTR_IF_BGE opt_ktr.h 606KTR_IF_EM opt_ktr.h 607KTR_IF_EMX opt_ktr.h 608KTR_KERNENTRY opt_ktr.h 609KTR_TESTLOG opt_ktr.h 610KTR_SERIALIZER opt_ktr.h 611KTR_POLLING opt_ktr.h 612KTR_IFQ opt_ktr.h 613KTR_IF_START opt_ktr.h 614KTR_HAMMER opt_ktr.h 615KTR_ETHERNET opt_ktr.h 616KTR_CTXSW opt_ktr.h 617 618# options for the Atheros driver 619ATH_DEBUG opt_ath.h 620ATH_DIAGAPI opt_ath.h 621ATH_RXBUF opt_ath.h 622ATH_TXBUF opt_ath.h 623 624# ...and its HAL 625AH_SUPPORT_AR5416 opt_ah.h 626 627# bce driver 628BCE_DEBUG opt_bce.h 629BCE_NVRAM_WRITE_SUPPORT opt_bce.h 630 631# ed driver 632ED_NO_MIIBUS opt_ed.h 633 634# emx driver 635EMX_RSS_DEBUG opt_emx.h 636 637# jme driver 638JME_RSS_DEBUG opt_jme.h 639 640# dcons options 641DCONS_BUF_SIZE opt_dcons.h 642DCONS_POLL_HZ opt_dcons.h 643DCONS_FORCE_CONSOLE opt_dcons.h 644DCONS_FORCE_GDB opt_dcons.h 645 646# deprecated drivers and options 647I_WANT_DEPRECATED_STUFF opt_deprecated.h 648 649# SCTP 650SCTP opt_sctp.h 651SCTP_DEBUG opt_sctp.h 652SCTP_USE_ADLER32 opt_sctp.h 653SCTP_HIGH_SPEED opt_sctp.h 654SCTP_STAT_LOGGING opt_sctp.h 655SCTP_CWND_LOGGING opt_sctp.h 656SCTP_BLK_LOGGING opt_sctp.h 657SCTP_STR_LOGGING opt_sctp.h 658SCTP_FR_LOGGING opt_sctp.h 659SCTP_MAP_LOGGING opt_sctp.h 660 661# syslink kernel support 662# 663SYSLINK opt_syslink.h 664 665# DSCHED stuff 666DSCHED_FQ opt_dsched.h 667 668# Receive Side Scaling (now basecode) 669RSS_DEBUG opt_rss.h 670 671# Enable watchdogs 672WATCHDOG_ENABLE opt_cpu.h 673 674# Panic settings 675WDOG_DISABLE_ON_PANIC opt_panic.h 676ERROR_LED_ON_PANIC opt_panic.h 677 678# 802.11 support layer 679IEEE80211_DEBUG opt_wlan.h 680IEEE80211_DEBUG_REFCNT opt_wlan.h 681IEEE80211_AMPDU_AGE opt_wlan.h 682IEEE80211_SUPPORT_MESH opt_wlan.h 683IEEE80211_SUPPORT_SUPERG opt_wlan.h 684IEEE80211_SUPPORT_TDMA opt_wlan.h 685 686# 802.11 TDMA support 687TDMA_SLOTLEN_DEFAULT opt_tdma.h 688TDMA_SLOTCNT_DEFAULT opt_tdma.h 689TDMA_BINTVAL_DEFAULT opt_tdma.h 690TDMA_TXRATE_11B_DEFAULT opt_tdma.h 691TDMA_TXRATE_11G_DEFAULT opt_tdma.h 692TDMA_TXRATE_11A_DEFAULT opt_tdma.h 693TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 694TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 695TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 696TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 697TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 698 699PANIC_REBOOT_WAIT_TIME opt_panic.h 700