1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# $DragonFly: src/sys/conf/options,v 1.98 2008/11/17 11:55:19 swildner Exp $ 3# 4# On the handling of kernel options 5# 6# All kernel options should be listed in LINT, with suitable 7# descriptions. Negative options (options that make some code not 8# compile) should be commented out; LINT should compile as much code 9# as possible. Try to structure option-using code so that a single 10# option only switch code on, or only switch code off, to make it 11# possible to have a full compile-test. If necessary, you can include 12# "opt_lint.h" and check for COMPILING_LINT to get maximum code 13# coverage. 14# 15# All new options shall also be listed in either "conf/options" or 16# "platform/<platform>/conf/options". Options that affect a single 17# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 18# options that affect multiple files should either go in 19# "opt_global.h" if this is a kernel-wide option (used just about 20# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 21# only some files. Note that the effect of listing only an option 22# without a header-file-name in conf/options (and cousins) is that the 23# last convention is followed. 24# 25# This handling scheme is not yet fully implemented. 26# 27# 28# Format of this file: 29# Option name filename 30# 31# If filename is missing, the default is 32# opt_<name-of-option-in-lower-case>.h 33 34# Adaptec Array Controller driver options 35AAC_DEBUG opt_aac.h # Debugging levels: 36 # 0 - quiet, only emit warnings 37 # 1 - noisy, emit major function 38 # points and things done 39 # 2 - noisier, emit trace items 40 # in loops, etc. 41 # 3 - even more noisy, more function 42 # points 43 # 4 - noisiest 44 45# Adaptec aic7xxx SCSI controller options 46AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 47 # mapped I/O 48 49AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 50 # targetmode operations. 51 52AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 53 # configuration prom. 54 55AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 56 57AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 58 # See sys/dev/aic7xxx/aic7xxx.h 59 60AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 61 # output. Adds ~15k to driver. 62 63# Adaptec aic79xx SCSI controller options 64AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 65 66AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 67 # See sys/dev/aic7xxx/aic79xx.h 68 69AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 70 # targetmode operations. 71 72AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 73 # output. Adds ~15k to driver. 74 75ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 76 # mapped I/O 77TWA_DEBUG opt_twa.h 78TWA_FLASH_FIRMWARE opt_twa.h 79 80#options for ACPI support 81ACPI_DEBUG opt_acpi.h 82ACPI_NO_SEMAPHORES opt_acpi.h 83ACPI_QUIRK_VMWARE opt_acpi.h 84 85# Miscellaneous options. 86COMPAT_DF12 opt_compatdf12.h 87COMPAT_43 opt_compat.h 88COMPAT_SUNOS opt_compat.h 89COMPILING_LINT opt_lint.h 90CY_PCI_FASTINTR 91DDB 92DDB_TRACE 93DDB_UNATTENDED opt_ddb.h 94GDB_REMOTE_CHAT opt_ddb.h 95HW_WDOG 96KTRACE 97LIBICONV 98MD_NSECT opt_md.h 99MD_ROOT opt_md.h 100MD_ROOT_SIZE opt_md.h 101NSWAPDEV opt_swap.h 102NSWBUF_MIN opt_swap.h 103PPS_SYNC opt_ntp.h 104QUOTA 105SUIDDIR opt_suiddir.h 106SYSVMSG opt_sysvipc.h 107SYSVSEM opt_sysvipc.h 108SYSVSHM opt_sysvipc.h 109SHMALL opt_sysvipc.h 110SHMMAX opt_sysvipc.h 111SHMMAXPGS opt_sysvipc.h 112SHMMIN opt_sysvipc.h 113SHMMNI opt_sysvipc.h 114SHMSEG opt_sysvipc.h 115SEMMAP opt_sysvipc.h 116SEMMNI opt_sysvipc.h 117SEMMNS opt_sysvipc.h 118SEMMNU opt_sysvipc.h 119SEMMSL opt_sysvipc.h 120SEMOPM opt_sysvipc.h 121SEMUME opt_sysvipc.h 122MSGMNB opt_sysvipc.h 123MSGMNI opt_sysvipc.h 124MSGSEG opt_sysvipc.h 125MSGSSZ opt_sysvipc.h 126MSGTQL opt_sysvipc.h 127UCONSOLE 128ICMP_BANDLIM 129VFS_AIO 130DIRECTIO opt_directio.h 131 132# POSIX kernel options 133P1003_1B opt_posix.h 134_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 135_KPOSIX_VERSION opt_posix.h 136 137# Do we want the config file compiled into the kernel? 138INCLUDE_CONFIG_FILE opt_config.h 139 140# Options for static file systems. These should only be used at config 141# time, since the corresponding lkms cannot work if there are any static 142# dependencies. Unusability is enforced by hiding the defines for the 143# options in a never-included header. 144EXT2FS opt_dontuse.h 145FDESC opt_dontuse.h 146MFS opt_dontuse.h 147MSDOSFS opt_dontuse.h 148NULLFS opt_dontuse.h 149PORTAL opt_dontuse.h 150PROCFS opt_dontuse.h 151UDF opt_dontuse.h 152NTFS opt_dontuse.h 153 154# These static filesystems has one slightly bogus static dependency in 155# sys/platform/.../i386/autoconf.c. If any of these filesystems are 156# statically compiled into the kernel, code for mounting them as root 157# filesystems will be enabled - but look below. Boot-code is purposely 158# unavailable for the LKM-based versions. 159CD9660 160FFS 161NFS 162NWFS 163USERFS 164HAMMER 165 166# If you are following the conditions in the copyright, 167# you can enable soft-updates which will speed up a lot of things 168# and make the system safer from crashes at the same time. 169# otherwise a STUB module will be compiled in. 170SOFTUPDATES opt_ffs.h 171 172# Enable fast hash lookups for large directories on UFS-based filesystems. 173UFS_DIRHASH opt_ufs.h 174 175# The above static dependencies are planned removed, with a 176# <filesystem>_ROOT option to control if it usable as root. This list 177# allows these options to be present in config files already (though 178# they won't make any difference yet). 179FFS_ROOT opt_ffs.h 180NFS_ROOT opt_nfsroot.h 181 182# The union static file system has bogus static dependencies, so it isn't 183# hidden yet. 184UNION 185 186# Options used only in subr_param.c. 187HZ opt_param.h 188MAXFILES opt_param.h 189NBUF opt_param.h 190NMBCLUSTERS opt_param.h 191NMBUFS opt_param.h 192NSFBUFS opt_param.h 193VM_BCACHE_SIZE_MAX opt_param.h 194VM_SWZONE_SIZE_MAX opt_param.h 195MAXUSERS 196DFLDSIZ opt_param.h 197MAXDSIZ opt_param.h 198MAXSSIZ opt_param.h 199 200# Generic SCSI options. 201CAM_MAX_HIGHPOWER opt_cam.h 202CAMDEBUG opt_cam.h 203CAM_DEBUG_DELAY opt_cam.h 204CAM_DEBUG_BUS opt_cam.h 205CAM_DEBUG_TARGET opt_cam.h 206CAM_DEBUG_LUN opt_cam.h 207CAM_DEBUG_FLAGS opt_cam.h 208SCSI_DELAY opt_scsi.h 209SCSI_NO_SENSE_STRINGS opt_scsi.h 210SCSI_NO_OP_STRINGS opt_scsi.h 211 212# Options used only in cam/scsi/scsi_cd.c 213CHANGER_MIN_BUSY_SECONDS opt_cd.h 214CHANGER_MAX_BUSY_SECONDS opt_cd.h 215 216# Options used only in cam/scsi/scsi_sa.c. 217SA_IO_TIMEOUT opt_sa.h 218SA_SPACE_TIMEOUT opt_sa.h 219SA_REWIND_TIMEOUT opt_sa.h 220SA_ERASE_TIMEOUT opt_sa.h 221SA_1FM_AT_EOD opt_sa.h 222 223# Options used only in cam/scsi/scsi_pt.c 224SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 225 226# Options used only in cam/scsi/scsi_ses.c 227SES_ENABLE_PASSTHROUGH opt_ses.h 228 229# Options used in dev/sym/ (Symbios SCSI driver). 230SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 231 # Allows the ncr to take precedence 232 # 1 (1<<0) -> 810a, 860 233 # 2 (1<<1) -> 825a, 875, 885, 895 234 # 4 (1<<2) -> 895a, 896, 1510d 235SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 236 # disabled:0 (default), enabled:1 237SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 238 # disabled:0, enabled:1 (default) 239SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 240 # default:8, range:[1..64] 241 242# Options used only in pci/ncr.c 243SCSI_NCR_DEBUG opt_ncr.h 244SCSI_NCR_MAX_SYNC opt_ncr.h 245SCSI_NCR_MAX_WIDE opt_ncr.h 246SCSI_NCR_MYADDR opt_ncr.h 247 248# Options used only in pci/isp_pci.c 249ISP_TARGET_MODE opt_isp.h 250 251# Options used in the 'ata' ATA/ATAPI driver 252ATA_STATIC_ID opt_ata.h 253 254# Net stuff. 255# altq stuff 256ALTQ opt_global.h 257ALTQ_CBQ opt_altq.h 258ALTQ_RED opt_altq.h 259ALTQ_RIO opt_altq.h 260ALTQ_HFSC opt_altq.h 261ALTQ_PRIQ opt_altq.h 262ALTQ_FAIRQ opt_altq.h 263ALTQ_NOPCC opt_altq.h 264ALTQ_DEBUG opt_altq.h 265 266ACCEPT_FILTER_DATA 267ACCEPT_FILTER_HTTP 268BOOTP opt_bootp.h 269BOOTP_COMPAT opt_bootp.h 270BOOTP_NFSROOT opt_bootp.h 271BOOTP_NFSV3 opt_bootp.h 272BOOTP_WIRED_TO opt_bootp.h 273CARP opt_carp.h 274ETHER_II opt_ef.h 275ETHER_8023 opt_ef.h 276ETHER_8022 opt_ef.h 277ETHER_SNAP opt_ef.h 278MROUTING opt_mrouting.h 279PIM opt_mrouting.h 280INET opt_inet.h 281INET6 opt_inet6.h 282IPSEC opt_ipsec.h 283IPSEC_ESP opt_ipsec.h 284IPSEC_DEBUG opt_ipsec.h 285IPSEC_FILTERGIF opt_ipsec.h 286FAST_IPSEC opt_ipsec.h 287IPDIVERT 288DUMMYNET opt_ipdn.h 289DUMMYNET_DEBUG opt_ipdn.h 290IPFILTER opt_ipfilter.h 291IPFILTER_LOG opt_ipfilter.h 292IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 293IPFIREWALL opt_ipfw.h 294IPFIREWALL_DEBUG opt_ipfw.h 295IPFIREWALL_VERBOSE opt_ipfw.h 296IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 297IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 298IPFIREWALL_FORWARD opt_ipfw.h 299IPV6FIREWALL opt_ip6fw.h 300IPV6FIREWALL_VERBOSE opt_ip6fw.h 301IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 302IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 303IPSTEALTH 304IPX opt_ipx.h 305IPXIP opt_ipx.h 306IPTUNNEL opt_ipx.h 307LIBMCHAIN 308MPLS opt_mpls.h 309NCP opt_ncp.h 310NETATALK opt_atalk.h 311NS opt_ns.h 312PPP_BSDCOMP opt_ppp.h 313PPP_DEFLATE opt_ppp.h 314PPP_FILTER opt_ppp.h 315SLIP_IFF_OPTS opt_slip.h 316TCPDEBUG 317TCP_DROP_SYNFIN opt_tcp_input.h 318 319XBONEHACK 320MBUF_STRESS_TEST opt_mbuf_stress_test.h 321 322# (New netgraph, port still in progress) 323# 324# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 325# Each netgraph node type can be either be compiled into the kernel 326# or loaded dynamically. To get the former, include the corresponding 327# option below. Each type has its own man page, e.g. ng_async(4). 328NETGRAPH7 329NETGRAPH7_DEBUG opt_netgraph.h 330NETGRAPH7_ASYNC opt_netgraph.h 331NETGRAPH7_ATMLLC opt_netgraph.h 332NETGRAPH7_ATM_ATMPIF opt_netgraph.h 333NETGRAPH7_BLUETOOTH opt_netgraph.h 334NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 335NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 336NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 337NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 338NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 339NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 340NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 341NETGRAPH7_BPF opt_netgraph.h 342NETGRAPH7_BRIDGE opt_netgraph.h 343NETGRAPH7_CAR opt_netgraph.h 344NETGRAPH7_CISCO opt_netgraph.h 345NETGRAPH7_DEFLATE opt_netgraph.h 346NETGRAPH7_DEVICE opt_netgraph.h 347NETGRAPH7_ECHO opt_netgraph.h 348NETGRAPH7_EIFACE opt_netgraph.h 349NETGRAPH7_ETHER opt_netgraph.h 350NETGRAPH7_FEC opt_netgraph.h 351NETGRAPH7_FRAME_RELAY opt_netgraph.h 352NETGRAPH7_GIF opt_netgraph.h 353NETGRAPH7_GIF_DEMUX opt_netgraph.h 354NETGRAPH7_HOLE opt_netgraph.h 355NETGRAPH7_IFACE opt_netgraph.h 356NETGRAPH7_IP_INPUT opt_netgraph.h 357NETGRAPH7_IPFW opt_netgraph.h 358NETGRAPH7_KSOCKET opt_netgraph.h 359NETGRAPH7_L2TP opt_netgraph.h 360NETGRAPH7_LMI opt_netgraph.h 361# MPPC compression requires proprietary files (not included) 362NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 363NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 364NETGRAPH7_NAT opt_netgraph.h 365NETGRAPH7_NETFLOW opt_netgraph.h 366NETGRAPH7_ONE2MANY opt_netgraph.h 367NETGRAPH7_PPP opt_netgraph.h 368NETGRAPH7_PPPOE opt_netgraph.h 369NETGRAPH7_PPTPGRE opt_netgraph.h 370NETGRAPH7_PRED1 opt_netgraph.h 371NETGRAPH7_RFC1490 opt_netgraph.h 372NETGRAPH7_SOCKET opt_netgraph.h 373NETGRAPH7_SPLIT opt_netgraph.h 374NETGRAPH7_SPPP opt_netgraph.h 375NETGRAPH7_TAG opt_netgraph.h 376NETGRAPH7_TCPMSS opt_netgraph.h 377NETGRAPH7_TEE opt_netgraph.h 378NETGRAPH7_TTY opt_netgraph.h 379NETGRAPH7_UI opt_netgraph.h 380NETGRAPH7_VJC opt_netgraph.h 381 382# NgATM options 383NGATM7_ATM opt_netgraph.h 384NGATM7_ATMBASE opt_netgraph.h 385NGATM7_SSCOP opt_netgraph.h 386NGATM7_SSCFU opt_netgraph.h 387NGATM7_UNI opt_netgraph.h 388NGATM7_CCATM opt_netgraph.h 389 390# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 391# Each netgraph node type can be either be compiled into the kernel 392# or loaded dynamically. To get the former, include the corresponding 393# option below. Each type has its own man page, e.g. ng_async(8). 394NETGRAPH 395NETGRAPH_ASYNC opt_netgraph.h 396NETGRAPH_BPF opt_netgraph.h 397NETGRAPH_BRIDGE opt_netgraph.h 398NETGRAPH_CISCO opt_netgraph.h 399NETGRAPH_ECHO opt_netgraph.h 400NETGRAPH_EIFACE opt_netgraph.h 401NETGRAPH_ETHER opt_netgraph.h 402NETGRAPH_FRAME_RELAY opt_netgraph.h 403NETGRAPH_HOLE opt_netgraph.h 404NETGRAPH_IFACE opt_netgraph.h 405NETGRAPH_KSOCKET opt_netgraph.h 406NETGRAPH_LMI opt_netgraph.h 407NETGRAPH_L2TP opt_netgraph.h 408# MPPC compression requires proprietary files (not included) 409NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 410NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 411NETGRAPH_ONE2MANY opt_netgraph.h 412NETGRAPH_PPP opt_netgraph.h 413NETGRAPH_PPPOE opt_netgraph.h 414NETGRAPH_PPTPGRE opt_netgraph.h 415NETGRAPH_RFC1490 opt_netgraph.h 416NETGRAPH_SOCKET opt_netgraph.h 417NETGRAPH_TEE opt_netgraph.h 418NETGRAPH_TTY opt_netgraph.h 419NETGRAPH_UI opt_netgraph.h 420NETGRAPH_VJC opt_netgraph.h 421 422# DRM options 423DRM_DEBUG opt_drm.h 424DRM_LINUX opt_drm.h 425 426# ATM (HARP version) 427ATM_CORE opt_atm.h 428ATM_IP opt_atm.h 429ATM_SIGPVC opt_atm.h 430ATM_SPANS opt_atm.h 431ATM_UNI opt_atm.h 432 433# XXX Conflict: # of devices vs network protocol (Native ATM). 434# This makes "atm.h" unusable. 435NATM opt_natm.h 436 437# DPT driver debug flags 438DPT_MEASURE_PERFORMANCE opt_dpt.h 439DPT_HANDLE_TIMEOUTS opt_dpt.h 440DPT_TIMEOUT_FACTOR opt_dpt.h 441DPT_LOST_IRQ opt_dpt.h 442DPT_RESET_HBA opt_dpt.h 443 444# Misc debug flags. Most of these should probably be replaced with 445# 'DEBUG', and then let people recompile just the interesting modules 446# with 'make CC="cc -DDEBUG"'. 447CLUSTERDEBUG opt_debug_cluster.h 448DEBUG_1284 opt_ppb_1284.h 449VP0_DEBUG opt_vpo.h 450LPT_DEBUG opt_lpt.h 451PLIP_DEBUG opt_plip.h 452LOCKF_DEBUG opt_debug_lockf.h 453LOUTB opt_debug_outb.h 454NPX_DEBUG opt_debug_npx.h 455NETATALKDEBUG opt_atalk.h 456SI_DEBUG opt_debug_si.h 457 458# Fb options 459FB_DEBUG opt_fb.h 460FB_INSTALL_CDEV opt_fb.h 461 462# ppbus related options 463PERIPH_1284 opt_ppb_1284.h 464DONTPROBE_1284 opt_ppb_1284.h 465 466# smbus related options 467ENABLE_ALART opt_intpm.h 468 469# These cause changes all over the kernel 470BLKDEV_IOSIZE opt_global.h 471DEBUG opt_global.h 472DEBUG_LOCKS opt_global.h 473DEBUG_CRIT_SECTIONS opt_global.h 474DIAGNOSTIC opt_global.h 475INVARIANTS opt_global.h 476SIMPLELOCK_DEBUG opt_global.h 477VFS_BIO_DEBUG opt_global.h 478DEBUG_INTERRUPTS opt_global.h 479SOCKBUF_DEBUG opt_global.h 480PANIC_DEBUG opt_global.h 481MBUF_DEBUG opt_global.h 482 483# Sample system/interrupt PC 484DEBUG_PCTRACK opt_pctrack.h 485 486# These are VM related options 487NO_SWAPPING opt_vm.h 488PQ_CACHESIZE opt_vmpage.h 489 490# Standard SMP options 491SMP opt_global.h 492 493# sys/netkey 494KEY 495 496# Size of the kernel message buffer 497MSGBUF_SIZE opt_msgbuf.h 498 499# PCI related options 500COMPAT_OLDPCI 501 502# NFS options 503NFS_MINATTRTIMO opt_nfs.h 504NFS_MAXATTRTIMO opt_nfs.h 505NFS_MINDIRATTRTIMO opt_nfs.h 506NFS_MAXDIRATTRTIMO opt_nfs.h 507NFS_GATHERDELAY opt_nfs.h 508NFS_UIDHASHSIZ opt_nfs.h 509NFS_WDELAYHASHSIZ opt_nfs.h 510NFS_MUIDHASHSIZ opt_nfs.h 511NFS_NOSERVER opt_nfs.h 512NFS_DEBUG opt_nfs.h 513 514# MSDOSFS options 515MSDOSFS_DEBUG opt_msdosfs.h 516 517# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 518BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 519BROOKTREE_ALLOC_PAGES opt_bktr.h 520BKTR_OVERRIDE_CARD opt_bktr.h 521BKTR_OVERRIDE_TUNER opt_bktr.h 522BKTR_OVERRIDE_DBX opt_bktr.h 523BKTR_OVERRIDE_MSP opt_bktr.h 524BKTR_SYSTEM_DEFAULT opt_bktr.h 525BKTR_ALLOC_PAGES opt_bktr.h 526BKTR_USE_PLL opt_bktr.h 527BKTR_GPIO_ACCESS opt_bktr.h 528BKTR_NO_MSP_RESET opt_bktr.h 529BKTR_430_FX_MODE opt_bktr.h 530BKTR_SIS_VIA_MODE opt_bktr.h 531BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 532 533# meteor opt_meteor.h 534METEOR_ALLOC_PAGES opt_meteor.h 535METEOR_TEST_VIDEO opt_meteor.h 536METEOR_SYSTEM_DEFAULT opt_meteor.h 537METEOR_DEALLOC_PAGES opt_meteor.h 538METEOR_DEALLOC_ABOVE opt_meteor.h 539 540# Various mi ISA bus flags 541COMPAT_OLDISA opt_compat_oldisa.h 542COM_ESP opt_sio.h 543COM_MULTIPORT opt_sio.h 544BREAK_TO_DEBUGGER opt_comconsole.h 545ALT_BREAK_TO_DEBUGGER opt_comconsole.h 546 547# options for bus/device framework 548BUS_DEBUG opt_bus.h 549 550# options for USB support 551OHCI_DEBUG opt_usb.h 552USB_DEBUG opt_usb.h 553 554# Vinum options 555VINUMDEBUG opt_vinum.h 556 557# Embedded system options 558UKBD_DFLT_KEYMAP opt_ukbd.h 559INIT_PATH opt_init_path.h 560 561ROOTDEVNAME opt_rootdevname.h 562 563FDC_DEBUG opt_fdc.h 564PCFCLOCK_VERBOSE opt_pcfclock.h 565PCFCLOCK_MAX_RETRIES opt_pcfclock.h 566 567# Polling device handling 568DEVICE_POLLING opt_polling.h 569 570# Network device queue based polling 571IFPOLL_ENABLE opt_ifpoll.h 572 573# options for ubsec driver 574UBSEC_DEBUG opt_ubsec.h 575UBSEC_RNDTEST opt_ubsec.h 576UBSEC_NO_RNG opt_ubsec.h 577 578# options for hifn driver 579HIFN_DEBUG opt_hifn.h 580HIFN_RNDTEST opt_hifn.h 581HIFN_NO_RNG opt_hifn.h 582 583# KTR options 584KTR opt_global.h 585KTR_ALL opt_ktr.h 586KTR_TOKENS opt_ktr.h 587KTR_MEMORY opt_ktr.h 588KTR_USB_MEMORY opt_ktr.h 589KTR_IPIQ opt_ktr.h 590KTR_MSGPORT opt_ktr.h 591KTR_ENTRIES opt_global.h 592KTR_VERBOSE opt_ktr.h 593KTR_GIANT_CONTENTION opt_ktr.h 594KTR_SPIN_CONTENTION opt_ktr.h 595KTR_IF_BGE opt_ktr.h 596KTR_IF_EM opt_ktr.h 597KTR_IF_EMX opt_ktr.h 598KTR_KERNENTRY opt_ktr.h 599KTR_TESTLOG opt_ktr.h 600KTR_SERIALIZER opt_ktr.h 601KTR_POLLING opt_ktr.h 602KTR_IFQ opt_ktr.h 603KTR_IF_START opt_ktr.h 604KTR_HAMMER opt_ktr.h 605KTR_ETHERNET opt_ktr.h 606 607# options for the Atheros driver 608ATH_DEBUG opt_ath.h 609ATH_DIAGAPI opt_ath.h 610ATH_RXBUF opt_ath.h 611ATH_TXBUF opt_ath.h 612 613# ...and its HAL 614AH_SUPPORT_AR5416 opt_ah.h 615 616# bce driver 617BCE_DEBUG opt_bce.h 618BCE_NVRAM_WRITE_SUPPORT opt_bce.h 619 620# ed driver 621ED_NO_MIIBUS opt_ed.h 622 623# emx driver 624EMX_RSS_DEBUG opt_emx.h 625 626# jme driver 627JME_RSS_DEBUG opt_jme.h 628 629# wi driver 630WI_SYMBOL_FIRMWARE opt_wi.h 631 632# dcons options 633DCONS_BUF_SIZE opt_dcons.h 634DCONS_POLL_HZ opt_dcons.h 635DCONS_FORCE_CONSOLE opt_dcons.h 636DCONS_FORCE_GDB opt_dcons.h 637 638# deprecated drivers and options 639I_WANT_DEPRECATED_STUFF opt_deprecated.h 640 641# SCTP 642SCTP opt_sctp.h 643SCTP_DEBUG opt_sctp.h 644SCTP_USE_ADLER32 opt_sctp.h 645SCTP_HIGH_SPEED opt_sctp.h 646SCTP_STAT_LOGGING opt_sctp.h 647SCTP_CWND_LOGGING opt_sctp.h 648SCTP_BLK_LOGGING opt_sctp.h 649SCTP_STR_LOGGING opt_sctp.h 650SCTP_FR_LOGGING opt_sctp.h 651SCTP_MAP_LOGGING opt_sctp.h 652 653# syslink kernel support 654# 655SYSLINK opt_syslink.h 656 657# Receive Side Scaling 658RSS opt_rss.h 659RSS_DEBUG opt_rss.h 660