1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# $DragonFly: src/sys/conf/options,v 1.64 2007/04/26 02:10:57 dillon Exp $ 3# 4# On the handling of kernel options 5# 6# All kernel options should be listed in LINT, with suitable 7# descriptions. Negative options (options that make some code not 8# compile) should be commented out; LINT should compile as much code 9# as possible. Try to structure option-using code so that a single 10# option only switch code on, or only switch code off, to make it 11# possible to have a full compile-test. If necessary, you can include 12# "opt_lint.h" and check for COMPILING_LINT to get maximum code 13# coverage. 14# 15# All new options shall also be listed in either "conf/options" or 16# "<platform>/conf/options.<platform>". Options that affect a single 17# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 18# options that affect multiple files should either go in 19# "opt_global.h" if this is a kernel-wide option (used just about 20# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 21# only some files. Note that the effect of listing only an option 22# without a header-file-name in conf/options (and cousins) is that the 23# last convention is followed. 24# 25# This handling scheme is not yet fully implemented. 26# 27# 28# Format of this file: 29# Option name filename 30# 31# If filename is missing, the default is 32# opt_<name-of-option-in-lower-case>.h 33 34# Adaptec Array Controller driver options 35AAC_DEBUG opt_aac.h # Debugging levels: 36 # 0 - quiet, only emit warnings 37 # 1 - noisy, emit major function 38 # points and things done 39 # 2 - extremely noisy, emit trace 40 # items in loops, etc. 41 42# Adaptec aic7xxx SCSI controller options 43AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 44 # mapped I/O 45 46AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 47 # targetmode operations. 48 49AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 50 # configuration prom. 51 52AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 53 54AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 55 # See sys/dev/aic7xxx/aic7xxx.h 56 57AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 58 # output. Adds ~15k to driver. 59 60# Adaptec aic79xx SCSI controller options 61AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 62 63AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 64 # See sys/dev/aic7xxx/aic79xx.h 65 66AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 67 # targetmode operations. 68 69AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 70 # output. Adds ~15k to driver. 71 72ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 73 # mapped I/O 74TWA_DEBUG opt_twa.h 75TWA_FLASH_FIRMWARE opt_twa.h 76 77#options for ACPI support 78ACPI_DEBUG opt_acpi.h 79ACPI_NO_SEMAPHORES opt_acpi.h 80ACPI_QUIRK_VMWARE opt_acpi.h 81 82# Miscellaneous options. 83COMPAT_DF12 opt_compatdf12.h 84COMPAT_43 opt_compat.h 85COMPAT_SUNOS opt_compat.h 86COMPILING_LINT opt_lint.h 87CY_PCI_FASTINTR 88DDB 89DDB_TRACE 90DDB_UNATTENDED opt_ddb.h 91GDB_REMOTE_CHAT opt_ddb.h 92HW_WDOG 93KTRACE 94LIBICONV 95MD_NSECT opt_md.h 96MD_ROOT opt_md.h 97MD_ROOT_SIZE opt_md.h 98NSWAPDEV opt_swap.h 99NSWBUF_MIN opt_swap.h 100PPS_SYNC opt_ntp.h 101QUOTA 102SUIDDIR opt_suiddir.h 103SYSVMSG opt_sysvipc.h 104SYSVSEM opt_sysvipc.h 105SYSVSHM opt_sysvipc.h 106SHMALL opt_sysvipc.h 107SHMMAX opt_sysvipc.h 108SHMMAXPGS opt_sysvipc.h 109SHMMIN opt_sysvipc.h 110SHMMNI opt_sysvipc.h 111SHMSEG opt_sysvipc.h 112SEMMAP opt_sysvipc.h 113SEMMNI opt_sysvipc.h 114SEMMNS opt_sysvipc.h 115SEMMNU opt_sysvipc.h 116SEMMSL opt_sysvipc.h 117SEMOPM opt_sysvipc.h 118SEMUME opt_sysvipc.h 119MSGMNB opt_sysvipc.h 120MSGMNI opt_sysvipc.h 121MSGSEG opt_sysvipc.h 122MSGSSZ opt_sysvipc.h 123MSGTQL opt_sysvipc.h 124UCONSOLE 125ICMP_BANDLIM 126VFS_AIO 127DIRECTIO opt_directio.h 128 129# POSIX kernel options 130P1003_1B opt_posix.h 131_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 132_KPOSIX_VERSION opt_posix.h 133 134# Do we want the config file compiled into the kernel? 135INCLUDE_CONFIG_FILE opt_config.h 136 137# Options for static file systems. These should only be used at config 138# time, since the corresponding lkms cannot work if there are any static 139# dependencies. Unusability is enforced by hiding the defines for the 140# options in a never-included header. 141EXT2FS opt_dontuse.h 142FDESC opt_dontuse.h 143MFS opt_dontuse.h 144MSDOSFS opt_dontuse.h 145NULLFS opt_dontuse.h 146PORTAL opt_dontuse.h 147PROCFS opt_dontuse.h 148UDF opt_dontuse.h 149NTFS opt_dontuse.h 150 151# These static filesystems has one slightly bogus static dependency in 152# sys/platform/.../i386/autoconf.c. If any of these filesystems are 153# statically compiled into the kernel, code for mounting them as root 154# filesystems will be enabled - but look below. Boot-code is purposely 155# unavailable for the LKM-based versions. 156CD9660 157FFS 158NFS 159NWFS 160 161# If you are following the conditions in the copyright, 162# you can enable soft-updates which will speed up a lot of thigs 163# and make the system safer from crashes at the same time. 164# otherwise a STUB module will be compiled in. 165SOFTUPDATES opt_ffs.h 166 167# Enable fast hash lookups for large directories on UFS-based filesystems. 168UFS_DIRHASH opt_ufs.h 169 170# The above static dependencies are planned removed, with a 171# <filesystem>_ROOT option to control if it usable as root. This list 172# allows these options to be present in config files already (though 173# they won't make any difference yet). 174FFS_ROOT opt_ffs.h 175NFS_ROOT opt_nfsroot.h 176 177# The union static file system has bogus static dependencies, so it isn't 178# hidden yet. 179UNION 180 181# Options used only in subr_param.c. 182HZ opt_param.h 183MAXFILES opt_param.h 184NBUF opt_param.h 185NMBCLUSTERS opt_param.h 186NMBUFS opt_param.h 187NSFBUFS opt_param.h 188VM_BCACHE_SIZE_MAX opt_param.h 189VM_SWZONE_SIZE_MAX opt_param.h 190MAXUSERS 191DFLDSIZ opt_param.h 192MAXDSIZ opt_param.h 193MAXSSIZ opt_param.h 194 195# Generic SCSI options. 196CAM_MAX_HIGHPOWER opt_cam.h 197CAMDEBUG opt_cam.h 198CAM_DEBUG_DELAY opt_cam.h 199CAM_DEBUG_BUS opt_cam.h 200CAM_DEBUG_TARGET opt_cam.h 201CAM_DEBUG_LUN opt_cam.h 202CAM_DEBUG_FLAGS opt_cam.h 203SCSI_DELAY opt_scsi.h 204SCSI_NO_SENSE_STRINGS opt_scsi.h 205SCSI_NO_OP_STRINGS opt_scsi.h 206 207# Options used only in cam/scsi/scsi_cd.c 208CHANGER_MIN_BUSY_SECONDS opt_cd.h 209CHANGER_MAX_BUSY_SECONDS opt_cd.h 210 211# Options used only in cam/scsi/scsi_sa.c. 212SA_IO_TIMEOUT opt_sa.h 213SA_SPACE_TIMEOUT opt_sa.h 214SA_REWIND_TIMEOUT opt_sa.h 215SA_ERASE_TIMEOUT opt_sa.h 216SA_1FM_AT_EOD opt_sa.h 217 218# Options used only in cam/scsi/scsi_pt.c 219SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 220 221# Options used only in cam/scsi/scsi_ses.c 222SES_ENABLE_PASSTHROUGH opt_ses.h 223 224# Options used in dev/sym/ (Symbios SCSI driver). 225SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 226 # Allows the ncr to take precedence 227 # 1 (1<<0) -> 810a, 860 228 # 2 (1<<1) -> 825a, 875, 885, 895 229 # 4 (1<<2) -> 895a, 896, 1510d 230SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 231 # disabled:0 (default), enabled:1 232SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 233 # disabled:0, enabled:1 (default) 234SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 235 # default:8, range:[1..64] 236 237# Options used only in pci/ncr.c 238SCSI_NCR_DEBUG opt_ncr.h 239SCSI_NCR_MAX_SYNC opt_ncr.h 240SCSI_NCR_MAX_WIDE opt_ncr.h 241SCSI_NCR_MYADDR opt_ncr.h 242 243# Options used only in pci/isp_pci.c 244ISP_TARGET_MODE opt_isp.h 245 246# Options used in the 'ata' ATA/ATAPI driver 247ATA_STATIC_ID opt_ata.h 248 249# Net stuff. 250# altq stuff 251ALTQ opt_global.h 252ALTQ_CBQ opt_altq.h 253ALTQ_RED opt_altq.h 254ALTQ_RIO opt_altq.h 255ALTQ_HFSC opt_altq.h 256ALTQ_PRIQ opt_altq.h 257ALTQ_NOPCC opt_altq.h 258ALTQ_DEBUG opt_altq.h 259 260ACCEPT_FILTER_DATA 261ACCEPT_FILTER_HTTP 262BOOTP opt_bootp.h 263BOOTP_COMPAT opt_bootp.h 264BOOTP_NFSROOT opt_bootp.h 265BOOTP_NFSV3 opt_bootp.h 266BOOTP_WIRED_TO opt_bootp.h 267ETHER_II opt_ef.h 268ETHER_8023 opt_ef.h 269ETHER_8022 opt_ef.h 270ETHER_SNAP opt_ef.h 271MROUTING opt_mrouting.h 272PIM opt_mrouting.h 273INET opt_inet.h 274INET6 opt_inet6.h 275IPSEC opt_ipsec.h 276IPSEC_ESP opt_ipsec.h 277IPSEC_DEBUG opt_ipsec.h 278IPSEC_FILTERGIF opt_ipsec.h 279FAST_IPSEC opt_ipsec.h 280IPDIVERT 281DUMMYNET opt_ipdn.h 282IPFILTER opt_ipfilter.h 283IPFILTER_LOG opt_ipfilter.h 284IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 285IPFIREWALL opt_ipfw.h 286IPFW2 opt_ipfw.h 287IPFIREWALL_VERBOSE opt_ipfw.h 288IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 289IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 290IPFIREWALL_FORWARD opt_ipfw.h 291IPV6FIREWALL opt_ip6fw.h 292IPV6FIREWALL_VERBOSE opt_ip6fw.h 293IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 294IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 295IPSTEALTH 296IPX opt_ipx.h 297IPXIP opt_ipx.h 298IPTUNNEL opt_ipx.h 299LIBMCHAIN 300NCP opt_ncp.h 301NETATALK opt_atalk.h 302NS opt_ns.h 303PPP_BSDCOMP opt_ppp.h 304PPP_DEFLATE opt_ppp.h 305PPP_FILTER opt_ppp.h 306SLIP_IFF_OPTS opt_slip.h 307TCPDEBUG 308TCP_DROP_SYNFIN opt_tcp_input.h 309 310XBONEHACK 311MBUF_STRESS_TEST opt_mbuf_stress_test.h 312 313# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 314# Each netgraph node type can be either be compiled into the kernel 315# or loaded dynamically. To get the former, include the corresponding 316# option below. Each type has its own man page, e.g. ng_async(8). 317NETGRAPH 318NETGRAPH_ASYNC opt_netgraph.h 319NETGRAPH_BPF opt_netgraph.h 320NETGRAPH_BRIDGE opt_netgraph.h 321NETGRAPH_CISCO opt_netgraph.h 322NETGRAPH_ECHO opt_netgraph.h 323NETGRAPH_ETHER opt_netgraph.h 324NETGRAPH_FRAME_RELAY opt_netgraph.h 325NETGRAPH_HOLE opt_netgraph.h 326NETGRAPH_IFACE opt_netgraph.h 327NETGRAPH_KSOCKET opt_netgraph.h 328NETGRAPH_LMI opt_netgraph.h 329NETGRAPH_L2TP opt_netgraph.h 330# MPPC compression requires proprietary files (not included) 331NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 332NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 333NETGRAPH_ONE2MANY opt_netgraph.h 334NETGRAPH_PPP opt_netgraph.h 335NETGRAPH_PPPOE opt_netgraph.h 336NETGRAPH_PPTPGRE opt_netgraph.h 337NETGRAPH_RFC1490 opt_netgraph.h 338NETGRAPH_SOCKET opt_netgraph.h 339NETGRAPH_TEE opt_netgraph.h 340NETGRAPH_TTY opt_netgraph.h 341NETGRAPH_UI opt_netgraph.h 342NETGRAPH_VJC opt_netgraph.h 343 344# DRM options 345DRM_DEBUG opt_drm.h 346DRM_LINUX opt_drm.h 347 348# ATM (HARP version) 349ATM_CORE opt_atm.h 350ATM_IP opt_atm.h 351ATM_SIGPVC opt_atm.h 352ATM_SPANS opt_atm.h 353ATM_UNI opt_atm.h 354 355# XXX Conflict: # of devices vs network protocol (Native ATM). 356# This makes "atm.h" unusable. 357NATM opt_natm.h 358 359# DPT driver debug flags 360DPT_MEASURE_PERFORMANCE opt_dpt.h 361DPT_HANDLE_TIMEOUTS opt_dpt.h 362DPT_TIMEOUT_FACTOR opt_dpt.h 363DPT_LOST_IRQ opt_dpt.h 364DPT_RESET_HBA opt_dpt.h 365 366# Misc debug flags. Most of these should probably be replaced with 367# 'DEBUG', and then let people recompile just the interesting modules 368# with 'make CC="cc -DDEBUG"'. 369CLUSTERDEBUG opt_debug_cluster.h 370DEBUG_1284 opt_ppb_1284.h 371VP0_DEBUG opt_vpo.h 372LPT_DEBUG opt_lpt.h 373PLIP_DEBUG opt_plip.h 374LOCKF_DEBUG opt_debug_lockf.h 375LOUTB opt_debug_outb.h 376NPX_DEBUG opt_debug_npx.h 377NETATALKDEBUG opt_atalk.h 378SI_DEBUG opt_debug_si.h 379 380# Fb options 381FB_DEBUG opt_fb.h 382FB_INSTALL_CDEV opt_fb.h 383 384# ppbus related options 385PERIPH_1284 opt_ppb_1284.h 386DONTPROBE_1284 opt_ppb_1284.h 387 388# smbus related options 389ENABLE_ALART opt_intpm.h 390 391# These cause changes all over the kernel 392BLKDEV_IOSIZE opt_global.h 393DEBUG opt_global.h 394DEBUG_LOCKS opt_global.h 395DEBUG_CRIT_SECTIONS opt_global.h 396DIAGNOSTIC opt_global.h 397INVARIANTS opt_global.h 398SIMPLELOCK_DEBUG opt_global.h 399VFS_BIO_DEBUG opt_global.h 400DEBUG_INTERRUPTS opt_global.h 401SOCKBUF_DEBUG opt_global.h 402PANIC_DEBUG opt_global.h 403 404# Sample system/interrupt PC 405DEBUG_PCTRACK opt_pctrack.h 406 407# These are VM related options 408NO_SWAPPING opt_vm.h 409PQ_CACHESIZE opt_vmpage.h 410 411# Standard SMP options 412SMP opt_global.h 413 414# sys/netkey 415KEY 416 417# Size of the kernel message buffer 418MSGBUF_SIZE opt_msgbuf.h 419 420# PCI related options 421PCI_QUIET opt_pci.h 422PCI_ENABLE_IO_MODES opt_pci.h 423PCI_MAP_FIXUP opt_pci.h 424COMPAT_OLDPCI 425 426# NFS options 427NFS_MINATTRTIMO opt_nfs.h 428NFS_MAXATTRTIMO opt_nfs.h 429NFS_MINDIRATTRTIMO opt_nfs.h 430NFS_MAXDIRATTRTIMO opt_nfs.h 431NFS_GATHERDELAY opt_nfs.h 432NFS_UIDHASHSIZ opt_nfs.h 433NFS_WDELAYHASHSIZ opt_nfs.h 434NFS_MUIDHASHSIZ opt_nfs.h 435NFS_NOSERVER opt_nfs.h 436NFS_DEBUG opt_nfs.h 437 438# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 439BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 440BROOKTREE_ALLOC_PAGES opt_bktr.h 441BKTR_OVERRIDE_CARD opt_bktr.h 442BKTR_OVERRIDE_TUNER opt_bktr.h 443BKTR_OVERRIDE_DBX opt_bktr.h 444BKTR_OVERRIDE_MSP opt_bktr.h 445BKTR_SYSTEM_DEFAULT opt_bktr.h 446BKTR_ALLOC_PAGES opt_bktr.h 447BKTR_USE_PLL opt_bktr.h 448BKTR_GPIO_ACCESS opt_bktr.h 449BKTR_NO_MSP_RESET opt_bktr.h 450BKTR_430_FX_MODE opt_bktr.h 451BKTR_SIS_VIA_MODE opt_bktr.h 452BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 453 454# meteor opt_meteor.h 455METEOR_ALLOC_PAGES opt_meteor.h 456METEOR_TEST_VIDEO opt_meteor.h 457METEOR_SYSTEM_DEFAULT opt_meteor.h 458METEOR_DEALLOC_PAGES opt_meteor.h 459METEOR_DEALLOC_ABOVE opt_meteor.h 460 461# Various mi ISA bus flags 462COMPAT_OLDISA opt_compat_oldisa.h 463COM_ESP opt_sio.h 464COM_MULTIPORT opt_sio.h 465BREAK_TO_DEBUGGER opt_comconsole.h 466ALT_BREAK_TO_DEBUGGER opt_comconsole.h 467 468# options for bus/device framework 469BUS_DEBUG opt_bus.h 470DEVICE_SYSCTLS opt_bus.h 471 472# options for USB support 473OHCI_DEBUG opt_usb.h 474USB_DEBUG opt_usb.h 475 476# Vinum options 477VINUMDEBUG opt_vinum.h 478 479# Embedded system options 480UKBD_DFLT_KEYMAP opt_ukbd.h 481INIT_PATH opt_init_path.h 482 483ROOTDEVNAME opt_rootdevname.h 484 485FDC_DEBUG opt_fdc.h 486PCFCLOCK_VERBOSE opt_pcfclock.h 487PCFCLOCK_MAX_RETRIES opt_pcfclock.h 488 489# Polling device handling 490DEVICE_POLLING opt_polling.h 491 492# options for ubsec driver 493UBSEC_DEBUG opt_ubsec.h 494UBSEC_RNDTEST opt_ubsec.h 495UBSEC_NO_RNG opt_ubsec.h 496 497# options for hifn driver 498HIFN_DEBUG opt_hifn.h 499HIFN_RNDTEST opt_hifn.h 500HIFN_NO_RNG opt_hifn.h 501 502# KTR options 503KTR opt_global.h 504KTR_ALL opt_ktr.h 505KTR_TOKENS opt_ktr.h 506KTR_MEMORY opt_ktr.h 507KTR_USB_MEMORY opt_ktr.h 508KTR_IPIQ opt_ktr.h 509KTR_MSGPORT opt_ktr.h 510KTR_ENTRIES opt_global.h 511KTR_VERBOSE opt_ktr.h 512KTR_GIANT_CONTENTION opt_ktr.h 513KTR_SPIN_CONTENTION opt_ktr.h 514 515# ed driver 516ED_NO_MIIBUS opt_ed.h 517 518# wi driver 519WI_SYMBOL_FIRMWARE opt_wi.h 520 521# dcons options 522DCONS_BUF_SIZE opt_dcons.h 523DCONS_POLL_HZ opt_dcons.h 524DCONS_FORCE_CONSOLE opt_dcons.h 525DCONS_FORCE_GDB opt_dcons.h 526 527# deprecated drivers and options 528I_WANT_DEPRECATED_STUFF opt_deprecated.h 529 530# SCTP 531SCTP opt_sctp.h 532SCTP_DEBUG opt_sctp.h 533SCTP_USE_ADLER32 opt_sctp.h 534SCTP_HIGH_SPEED opt_sctp.h 535SCTP_STAT_LOGGING opt_sctp.h 536SCTP_CWND_LOGGING opt_sctp.h 537SCTP_BLK_LOGGING opt_sctp.h 538SCTP_STR_LOGGING opt_sctp.h 539SCTP_FR_LOGGING opt_sctp.h 540SCTP_MAP_LOGGING opt_sctp.h 541 542# syslink kernel support 543# 544SYSLINK opt_syslink.h 545