1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# $DragonFly: src/sys/conf/options,v 1.98 2008/11/17 11:55:19 swildner Exp $ 3# 4# On the handling of kernel options 5# 6# All kernel options should be listed in LINT, with suitable 7# descriptions. Negative options (options that make some code not 8# compile) should be commented out; LINT should compile as much code 9# as possible. Try to structure option-using code so that a single 10# option only switch code on, or only switch code off, to make it 11# possible to have a full compile-test. If necessary, you can include 12# "opt_lint.h" and check for COMPILING_LINT to get maximum code 13# coverage. 14# 15# All new options shall also be listed in either "conf/options" or 16# "platform/<platform>/conf/options". Options that affect a single 17# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 18# options that affect multiple files should either go in 19# "opt_global.h" if this is a kernel-wide option (used just about 20# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 21# only some files. Note that the effect of listing only an option 22# without a header-file-name in conf/options (and cousins) is that the 23# last convention is followed. 24# 25# This handling scheme is not yet fully implemented. 26# 27# 28# Format of this file: 29# Option name filename 30# 31# If filename is missing, the default is 32# opt_<name-of-option-in-lower-case>.h 33 34# Adaptec Array Controller driver options 35AAC_DEBUG opt_aac.h # Debugging levels: 36 # 0 - quiet, only emit warnings 37 # 1 - noisy, emit major function 38 # points and things done 39 # 2 - noisier, emit trace items 40 # in loops, etc. 41 # 3 - even more noisy, more function 42 # points 43 # 4 - noisiest 44 45# Adaptec aic7xxx SCSI controller options 46AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 47 # mapped I/O 48 49AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 50 # targetmode operations. 51 52AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 53 # configuration prom. 54 55AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 56 57AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 58 # See sys/dev/aic7xxx/aic7xxx.h 59 60AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 61 # output. Adds ~15k to driver. 62 63# Adaptec aic79xx SCSI controller options 64AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 65 66AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 67 # See sys/dev/aic7xxx/aic79xx.h 68 69AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 70 # targetmode operations. 71 72AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 73 # output. Adds ~15k to driver. 74 75ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 76 # mapped I/O 77TWA_DEBUG opt_twa.h 78TWA_FLASH_FIRMWARE opt_twa.h 79 80#options for ACPI support 81ACPI_DEBUG opt_acpi.h 82ACPI_NO_SEMAPHORES opt_acpi.h 83ACPI_QUIRK_VMWARE opt_acpi.h 84 85# Miscellaneous options. 86COMPAT_DF12 opt_compatdf12.h 87COMPAT_43 opt_compat.h 88COMPAT_SUNOS opt_compat.h 89COMPILING_LINT opt_lint.h 90CY_PCI_FASTINTR 91DDB 92DDB_TRACE 93DDB_UNATTENDED opt_ddb.h 94GDB_REMOTE_CHAT opt_ddb.h 95HW_WDOG 96KTRACE 97LIBICONV 98MD_NSECT opt_md.h 99MD_ROOT opt_md.h 100MD_ROOT_SIZE opt_md.h 101NSWAPDEV opt_swap.h 102NSWBUF_MIN opt_swap.h 103PPS_SYNC opt_ntp.h 104QUOTA 105SUIDDIR opt_suiddir.h 106SYSVMSG opt_sysvipc.h 107SYSVSEM opt_sysvipc.h 108SYSVSHM opt_sysvipc.h 109SHMALL opt_sysvipc.h 110SHMMAX opt_sysvipc.h 111SHMMAXPGS opt_sysvipc.h 112SHMMIN opt_sysvipc.h 113SHMMNI opt_sysvipc.h 114SHMSEG opt_sysvipc.h 115SEMMAP opt_sysvipc.h 116SEMMNI opt_sysvipc.h 117SEMMNS opt_sysvipc.h 118SEMMNU opt_sysvipc.h 119SEMMSL opt_sysvipc.h 120SEMOPM opt_sysvipc.h 121SEMUME opt_sysvipc.h 122MSGMNB opt_sysvipc.h 123MSGMNI opt_sysvipc.h 124MSGSEG opt_sysvipc.h 125MSGSSZ opt_sysvipc.h 126MSGTQL opt_sysvipc.h 127UCONSOLE 128ICMP_BANDLIM 129VFS_AIO 130DIRECTIO opt_directio.h 131 132# POSIX kernel options 133P1003_1B opt_posix.h 134_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 135_KPOSIX_VERSION opt_posix.h 136 137# Do we want the config file compiled into the kernel? 138INCLUDE_CONFIG_FILE opt_config.h 139 140# Options for static file systems. These should only be used at config 141# time, since the corresponding lkms cannot work if there are any static 142# dependencies. Unusability is enforced by hiding the defines for the 143# options in a never-included header. 144EXT2FS opt_dontuse.h 145FDESC opt_dontuse.h 146MFS opt_dontuse.h 147MSDOSFS opt_dontuse.h 148NULLFS opt_dontuse.h 149PORTAL opt_dontuse.h 150PROCFS opt_dontuse.h 151UDF opt_dontuse.h 152NTFS opt_dontuse.h 153 154# These static filesystems has one slightly bogus static dependency in 155# sys/platform/.../i386/autoconf.c. If any of these filesystems are 156# statically compiled into the kernel, code for mounting them as root 157# filesystems will be enabled - but look below. Boot-code is purposely 158# unavailable for the LKM-based versions. 159CD9660 160FFS 161NFS 162NWFS 163USERFS 164HAMMER 165 166# If you are following the conditions in the copyright, 167# you can enable soft-updates which will speed up a lot of things 168# and make the system safer from crashes at the same time. 169# otherwise a STUB module will be compiled in. 170SOFTUPDATES opt_ffs.h 171 172# Enable fast hash lookups for large directories on UFS-based filesystems. 173UFS_DIRHASH opt_ufs.h 174 175# The above static dependencies are planned removed, with a 176# <filesystem>_ROOT option to control if it usable as root. This list 177# allows these options to be present in config files already (though 178# they won't make any difference yet). 179FFS_ROOT opt_ffs.h 180NFS_ROOT opt_nfsroot.h 181 182# The union static file system has bogus static dependencies, so it isn't 183# hidden yet. 184UNION 185 186# Options used only in subr_param.c. 187HZ opt_param.h 188MAXFILES opt_param.h 189NBUF opt_param.h 190NMBCLUSTERS opt_param.h 191NMBUFS opt_param.h 192NSFBUFS opt_param.h 193VM_BCACHE_SIZE_MAX opt_param.h 194VM_SWZONE_SIZE_MAX opt_param.h 195MAXUSERS 196DFLDSIZ opt_param.h 197MAXDSIZ opt_param.h 198MAXSSIZ opt_param.h 199 200# Generic SCSI options. 201CAM_MAX_HIGHPOWER opt_cam.h 202CAMDEBUG opt_cam.h 203CAM_DEBUG_DELAY opt_cam.h 204CAM_DEBUG_BUS opt_cam.h 205CAM_DEBUG_TARGET opt_cam.h 206CAM_DEBUG_LUN opt_cam.h 207CAM_DEBUG_FLAGS opt_cam.h 208SCSI_DELAY opt_scsi.h 209SCSI_NO_SENSE_STRINGS opt_scsi.h 210SCSI_NO_OP_STRINGS opt_scsi.h 211 212# iSCSI options 213ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 214 215# Options used only in cam/scsi/scsi_cd.c 216CHANGER_MIN_BUSY_SECONDS opt_cd.h 217CHANGER_MAX_BUSY_SECONDS opt_cd.h 218 219# Options used only in cam/scsi/scsi_sa.c. 220SA_IO_TIMEOUT opt_sa.h 221SA_SPACE_TIMEOUT opt_sa.h 222SA_REWIND_TIMEOUT opt_sa.h 223SA_ERASE_TIMEOUT opt_sa.h 224SA_1FM_AT_EOD opt_sa.h 225 226# Options used only in cam/scsi/scsi_pt.c 227SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 228 229# Options used only in cam/scsi/scsi_ses.c 230SES_ENABLE_PASSTHROUGH opt_ses.h 231 232# Options used in dev/sym/ (Symbios SCSI driver). 233SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 234 # Allows the ncr to take precedence 235 # 1 (1<<0) -> 810a, 860 236 # 2 (1<<1) -> 825a, 875, 885, 895 237 # 4 (1<<2) -> 895a, 896, 1510d 238SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 239 # disabled:0 (default), enabled:1 240SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 241 # disabled:0, enabled:1 (default) 242SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 243 # default:8, range:[1..64] 244 245# Options used only in pci/ncr.c 246SCSI_NCR_DEBUG opt_ncr.h 247SCSI_NCR_MAX_SYNC opt_ncr.h 248SCSI_NCR_MAX_WIDE opt_ncr.h 249SCSI_NCR_MYADDR opt_ncr.h 250 251# Options used only in pci/isp_pci.c 252ISP_TARGET_MODE opt_isp.h 253 254# Options used in the 'ata' ATA/ATAPI driver 255ATA_STATIC_ID opt_ata.h 256 257# Net stuff. 258# altq stuff 259ALTQ opt_global.h 260ALTQ_CBQ opt_altq.h 261ALTQ_RED opt_altq.h 262ALTQ_RIO opt_altq.h 263ALTQ_HFSC opt_altq.h 264ALTQ_PRIQ opt_altq.h 265ALTQ_FAIRQ opt_altq.h 266ALTQ_NOPCC opt_altq.h 267ALTQ_DEBUG opt_altq.h 268 269ACCEPT_FILTER_DATA 270ACCEPT_FILTER_HTTP 271BOOTP opt_bootp.h 272BOOTP_COMPAT opt_bootp.h 273BOOTP_NFSROOT opt_bootp.h 274BOOTP_NFSV3 opt_bootp.h 275BOOTP_WIRED_TO opt_bootp.h 276CARP opt_carp.h 277ETHER_II opt_ef.h 278ETHER_8023 opt_ef.h 279ETHER_8022 opt_ef.h 280ETHER_SNAP opt_ef.h 281MROUTING opt_mrouting.h 282PIM opt_mrouting.h 283INET opt_inet.h 284INET6 opt_inet6.h 285IPSEC opt_ipsec.h 286IPSEC_ESP opt_ipsec.h 287IPSEC_DEBUG opt_ipsec.h 288IPSEC_FILTERGIF opt_ipsec.h 289FAST_IPSEC opt_ipsec.h 290IPDIVERT 291DUMMYNET opt_ipdn.h 292DUMMYNET_DEBUG opt_ipdn.h 293IPFILTER opt_ipfilter.h 294IPFILTER_LOG opt_ipfilter.h 295IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 296IPFIREWALL opt_ipfw.h 297IPFIREWALL_DEBUG opt_ipfw.h 298IPFIREWALL_VERBOSE opt_ipfw.h 299IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 300IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 301IPFIREWALL_FORWARD opt_ipfw.h 302IPV6FIREWALL opt_ip6fw.h 303IPV6FIREWALL_VERBOSE opt_ip6fw.h 304IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 305IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 306IPSTEALTH 307IPX opt_ipx.h 308IPXIP opt_ipx.h 309IPTUNNEL opt_ipx.h 310LIBMCHAIN 311MPLS opt_mpls.h 312NCP opt_ncp.h 313NETATALK opt_atalk.h 314NS opt_ns.h 315PPP_BSDCOMP opt_ppp.h 316PPP_DEFLATE opt_ppp.h 317PPP_FILTER opt_ppp.h 318SLIP_IFF_OPTS opt_slip.h 319TCPDEBUG 320TCP_DROP_SYNFIN opt_tcp_input.h 321 322XBONEHACK 323MBUF_STRESS_TEST opt_mbuf_stress_test.h 324 325# (New netgraph, port still in progress) 326# 327# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 328# Each netgraph node type can be either be compiled into the kernel 329# or loaded dynamically. To get the former, include the corresponding 330# option below. Each type has its own man page, e.g. ng_async(4). 331NETGRAPH7 332NETGRAPH7_DEBUG opt_netgraph.h 333NETGRAPH7_ASYNC opt_netgraph.h 334NETGRAPH7_ATMLLC opt_netgraph.h 335NETGRAPH7_ATM_ATMPIF opt_netgraph.h 336NETGRAPH7_BLUETOOTH opt_netgraph.h 337NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 338NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 339NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 340NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 341NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 342NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 343NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 344NETGRAPH7_BPF opt_netgraph.h 345NETGRAPH7_BRIDGE opt_netgraph.h 346NETGRAPH7_CAR opt_netgraph.h 347NETGRAPH7_CISCO opt_netgraph.h 348NETGRAPH7_DEFLATE opt_netgraph.h 349NETGRAPH7_DEVICE opt_netgraph.h 350NETGRAPH7_ECHO opt_netgraph.h 351NETGRAPH7_EIFACE opt_netgraph.h 352NETGRAPH7_ETHER opt_netgraph.h 353NETGRAPH7_FEC opt_netgraph.h 354NETGRAPH7_FRAME_RELAY opt_netgraph.h 355NETGRAPH7_GIF opt_netgraph.h 356NETGRAPH7_GIF_DEMUX opt_netgraph.h 357NETGRAPH7_HOLE opt_netgraph.h 358NETGRAPH7_IFACE opt_netgraph.h 359NETGRAPH7_IP_INPUT opt_netgraph.h 360NETGRAPH7_IPFW opt_netgraph.h 361NETGRAPH7_KSOCKET opt_netgraph.h 362NETGRAPH7_L2TP opt_netgraph.h 363NETGRAPH7_LMI opt_netgraph.h 364# MPPC compression requires proprietary files (not included) 365NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 366NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 367NETGRAPH7_NAT opt_netgraph.h 368NETGRAPH7_NETFLOW opt_netgraph.h 369NETGRAPH7_ONE2MANY opt_netgraph.h 370NETGRAPH7_PPP opt_netgraph.h 371NETGRAPH7_PPPOE opt_netgraph.h 372NETGRAPH7_PPTPGRE opt_netgraph.h 373NETGRAPH7_PRED1 opt_netgraph.h 374NETGRAPH7_RFC1490 opt_netgraph.h 375NETGRAPH7_SOCKET opt_netgraph.h 376NETGRAPH7_SPLIT opt_netgraph.h 377NETGRAPH7_SPPP opt_netgraph.h 378NETGRAPH7_TAG opt_netgraph.h 379NETGRAPH7_TCPMSS opt_netgraph.h 380NETGRAPH7_TEE opt_netgraph.h 381NETGRAPH7_TTY opt_netgraph.h 382NETGRAPH7_UI opt_netgraph.h 383NETGRAPH7_VJC opt_netgraph.h 384 385# NgATM options 386NGATM7_ATM opt_netgraph.h 387NGATM7_ATMBASE opt_netgraph.h 388NGATM7_SSCOP opt_netgraph.h 389NGATM7_SSCFU opt_netgraph.h 390NGATM7_UNI opt_netgraph.h 391NGATM7_CCATM opt_netgraph.h 392 393# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 394# Each netgraph node type can be either be compiled into the kernel 395# or loaded dynamically. To get the former, include the corresponding 396# option below. Each type has its own man page, e.g. ng_async(8). 397NETGRAPH 398NETGRAPH_ASYNC opt_netgraph.h 399NETGRAPH_BPF opt_netgraph.h 400NETGRAPH_BRIDGE opt_netgraph.h 401NETGRAPH_CISCO opt_netgraph.h 402NETGRAPH_ECHO opt_netgraph.h 403NETGRAPH_EIFACE opt_netgraph.h 404NETGRAPH_ETHER opt_netgraph.h 405NETGRAPH_FRAME_RELAY opt_netgraph.h 406NETGRAPH_HOLE opt_netgraph.h 407NETGRAPH_IFACE opt_netgraph.h 408NETGRAPH_KSOCKET opt_netgraph.h 409NETGRAPH_LMI opt_netgraph.h 410NETGRAPH_L2TP opt_netgraph.h 411# MPPC compression requires proprietary files (not included) 412NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 413NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 414NETGRAPH_ONE2MANY opt_netgraph.h 415NETGRAPH_PPP opt_netgraph.h 416NETGRAPH_PPPOE opt_netgraph.h 417NETGRAPH_PPTPGRE opt_netgraph.h 418NETGRAPH_RFC1490 opt_netgraph.h 419NETGRAPH_SOCKET opt_netgraph.h 420NETGRAPH_TEE opt_netgraph.h 421NETGRAPH_TTY opt_netgraph.h 422NETGRAPH_UI opt_netgraph.h 423NETGRAPH_VJC opt_netgraph.h 424 425# DRM options 426DRM_DEBUG opt_drm.h 427DRM_LINUX opt_drm.h 428 429# ATM (HARP version) 430ATM_CORE opt_atm.h 431ATM_IP opt_atm.h 432ATM_SIGPVC opt_atm.h 433ATM_SPANS opt_atm.h 434ATM_UNI opt_atm.h 435 436# XXX Conflict: # of devices vs network protocol (Native ATM). 437# This makes "atm.h" unusable. 438NATM opt_natm.h 439 440# DPT driver debug flags 441DPT_MEASURE_PERFORMANCE opt_dpt.h 442DPT_HANDLE_TIMEOUTS opt_dpt.h 443DPT_TIMEOUT_FACTOR opt_dpt.h 444DPT_LOST_IRQ opt_dpt.h 445DPT_RESET_HBA opt_dpt.h 446 447# Misc debug flags. Most of these should probably be replaced with 448# 'DEBUG', and then let people recompile just the interesting modules 449# with 'make CC="cc -DDEBUG"'. 450CLUSTERDEBUG opt_debug_cluster.h 451DEBUG_1284 opt_ppb_1284.h 452VP0_DEBUG opt_vpo.h 453LPT_DEBUG opt_lpt.h 454PLIP_DEBUG opt_plip.h 455LOCKF_DEBUG opt_debug_lockf.h 456LOUTB opt_debug_outb.h 457NPX_DEBUG opt_debug_npx.h 458NETATALKDEBUG opt_atalk.h 459SI_DEBUG opt_debug_si.h 460 461# Fb options 462FB_DEBUG opt_fb.h 463FB_INSTALL_CDEV opt_fb.h 464 465# ppbus related options 466PERIPH_1284 opt_ppb_1284.h 467DONTPROBE_1284 opt_ppb_1284.h 468 469# smbus related options 470ENABLE_ALART opt_intpm.h 471 472# These cause changes all over the kernel 473BLKDEV_IOSIZE opt_global.h 474DEBUG opt_global.h 475DEBUG_LOCKS opt_global.h 476DEBUG_CRIT_SECTIONS opt_global.h 477DIAGNOSTIC opt_global.h 478INVARIANTS opt_global.h 479SIMPLELOCK_DEBUG opt_global.h 480VFS_BIO_DEBUG opt_global.h 481DEBUG_INTERRUPTS opt_global.h 482SOCKBUF_DEBUG opt_global.h 483PANIC_DEBUG opt_global.h 484MBUF_DEBUG opt_global.h 485 486# Sample system/interrupt PC 487DEBUG_PCTRACK opt_pctrack.h 488 489# These are VM related options 490NO_SWAPPING opt_vm.h 491PQ_CACHESIZE opt_vmpage.h 492 493# Standard SMP options 494SMP opt_global.h 495 496# sys/netkey 497KEY 498 499# Size of the kernel message buffer 500MSGBUF_SIZE opt_msgbuf.h 501 502# PCI related options 503COMPAT_OLDPCI 504 505# NFS options 506NFS_MINATTRTIMO opt_nfs.h 507NFS_MAXATTRTIMO opt_nfs.h 508NFS_MINDIRATTRTIMO opt_nfs.h 509NFS_MAXDIRATTRTIMO opt_nfs.h 510NFS_GATHERDELAY opt_nfs.h 511NFS_UIDHASHSIZ opt_nfs.h 512NFS_WDELAYHASHSIZ opt_nfs.h 513NFS_MUIDHASHSIZ opt_nfs.h 514NFS_NOSERVER opt_nfs.h 515NFS_DEBUG opt_nfs.h 516 517# MSDOSFS options 518MSDOSFS_DEBUG opt_msdosfs.h 519 520# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 521BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 522BROOKTREE_ALLOC_PAGES opt_bktr.h 523BKTR_OVERRIDE_CARD opt_bktr.h 524BKTR_OVERRIDE_TUNER opt_bktr.h 525BKTR_OVERRIDE_DBX opt_bktr.h 526BKTR_OVERRIDE_MSP opt_bktr.h 527BKTR_SYSTEM_DEFAULT opt_bktr.h 528BKTR_ALLOC_PAGES opt_bktr.h 529BKTR_USE_PLL opt_bktr.h 530BKTR_GPIO_ACCESS opt_bktr.h 531BKTR_NO_MSP_RESET opt_bktr.h 532BKTR_430_FX_MODE opt_bktr.h 533BKTR_SIS_VIA_MODE opt_bktr.h 534BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 535 536# meteor opt_meteor.h 537METEOR_ALLOC_PAGES opt_meteor.h 538METEOR_TEST_VIDEO opt_meteor.h 539METEOR_SYSTEM_DEFAULT opt_meteor.h 540METEOR_DEALLOC_PAGES opt_meteor.h 541METEOR_DEALLOC_ABOVE opt_meteor.h 542 543# Various mi ISA bus flags 544COMPAT_OLDISA opt_compat_oldisa.h 545COM_ESP opt_sio.h 546COM_MULTIPORT opt_sio.h 547BREAK_TO_DEBUGGER opt_comconsole.h 548ALT_BREAK_TO_DEBUGGER opt_comconsole.h 549 550# options for bus/device framework 551BUS_DEBUG opt_bus.h 552 553# options for USB support 554OHCI_DEBUG opt_usb.h 555USB_DEBUG opt_usb.h 556 557# Vinum options 558VINUMDEBUG opt_vinum.h 559 560# Embedded system options 561UKBD_DFLT_KEYMAP opt_ukbd.h 562INIT_PATH opt_init_path.h 563 564ROOTDEVNAME opt_rootdevname.h 565 566FDC_DEBUG opt_fdc.h 567PCFCLOCK_VERBOSE opt_pcfclock.h 568PCFCLOCK_MAX_RETRIES opt_pcfclock.h 569 570# Polling device handling 571DEVICE_POLLING opt_polling.h 572 573# Network device queue based polling 574IFPOLL_ENABLE opt_ifpoll.h 575 576# options for ubsec driver 577UBSEC_DEBUG opt_ubsec.h 578UBSEC_RNDTEST opt_ubsec.h 579UBSEC_NO_RNG opt_ubsec.h 580 581# options for hifn driver 582HIFN_DEBUG opt_hifn.h 583HIFN_RNDTEST opt_hifn.h 584HIFN_NO_RNG opt_hifn.h 585 586# KTR options 587KTR opt_global.h 588KTR_ALL opt_ktr.h 589KTR_TOKENS opt_ktr.h 590KTR_MEMORY opt_ktr.h 591KTR_USB_MEMORY opt_ktr.h 592KTR_IPIQ opt_ktr.h 593KTR_MSGPORT opt_ktr.h 594KTR_ENTRIES opt_global.h 595KTR_VERBOSE opt_ktr.h 596KTR_GIANT_CONTENTION opt_ktr.h 597KTR_SPIN_CONTENTION opt_ktr.h 598KTR_IF_BGE opt_ktr.h 599KTR_IF_EM opt_ktr.h 600KTR_IF_EMX opt_ktr.h 601KTR_KERNENTRY opt_ktr.h 602KTR_TESTLOG opt_ktr.h 603KTR_SERIALIZER opt_ktr.h 604KTR_POLLING opt_ktr.h 605KTR_IFQ opt_ktr.h 606KTR_IF_START opt_ktr.h 607KTR_HAMMER opt_ktr.h 608KTR_ETHERNET opt_ktr.h 609 610# options for the Atheros driver 611ATH_DEBUG opt_ath.h 612ATH_DIAGAPI opt_ath.h 613ATH_RXBUF opt_ath.h 614ATH_TXBUF opt_ath.h 615 616# ...and its HAL 617AH_SUPPORT_AR5416 opt_ah.h 618 619# bce driver 620BCE_DEBUG opt_bce.h 621BCE_NVRAM_WRITE_SUPPORT opt_bce.h 622 623# ed driver 624ED_NO_MIIBUS opt_ed.h 625 626# emx driver 627EMX_RSS_DEBUG opt_emx.h 628 629# jme driver 630JME_RSS_DEBUG opt_jme.h 631 632# wi driver 633WI_SYMBOL_FIRMWARE opt_wi.h 634 635# dcons options 636DCONS_BUF_SIZE opt_dcons.h 637DCONS_POLL_HZ opt_dcons.h 638DCONS_FORCE_CONSOLE opt_dcons.h 639DCONS_FORCE_GDB opt_dcons.h 640 641# deprecated drivers and options 642I_WANT_DEPRECATED_STUFF opt_deprecated.h 643 644# SCTP 645SCTP opt_sctp.h 646SCTP_DEBUG opt_sctp.h 647SCTP_USE_ADLER32 opt_sctp.h 648SCTP_HIGH_SPEED opt_sctp.h 649SCTP_STAT_LOGGING opt_sctp.h 650SCTP_CWND_LOGGING opt_sctp.h 651SCTP_BLK_LOGGING opt_sctp.h 652SCTP_STR_LOGGING opt_sctp.h 653SCTP_FR_LOGGING opt_sctp.h 654SCTP_MAP_LOGGING opt_sctp.h 655 656# syslink kernel support 657# 658SYSLINK opt_syslink.h 659 660# Receive Side Scaling 661RSS opt_rss.h 662RSS_DEBUG opt_rss.h 663