1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68AMR_DEBUG opt_amr.h 69TWA_DEBUG opt_twa.h 70 71#options for ACPI support 72ACPI_DEBUG opt_acpi.h 73ACPI_NO_SEMAPHORES opt_acpi.h 74ACPI_ENABLE_PCI opt_acpi.h 75 76# Miscellaneous options. 77COMPAT_DF12 opt_compatdf12.h 78COMPAT_43 opt_compat.h 79COMPAT_SUNOS opt_compat.h 80COMPILING_LINT opt_lint.h 81DDB 82DDB_TRACE 83DDB_UNATTENDED opt_ddb.h 84GDB_REMOTE_CHAT opt_ddb.h 85KTRACE 86LIBICONV 87MD_NSECT opt_md.h 88MD_ROOT opt_md.h 89MD_ROOT_SIZE opt_md.h 90MFI_DEBUG opt_mfi.h 91NSWAPDEV opt_swap.h 92NSWBUF_MIN opt_swap.h 93PPS_SYNC opt_ntp.h 94QUOTA 95SUIDDIR opt_suiddir.h 96SYSVMSG opt_sysvipc.h 97SYSVSEM opt_sysvipc.h 98SYSVSHM opt_sysvipc.h 99SHMMIN opt_sysvipc.h 100SHMMNI opt_sysvipc.h 101SHMSEG opt_sysvipc.h 102SEMMAP opt_sysvipc.h 103SEMMNI opt_sysvipc.h 104SEMMNS opt_sysvipc.h 105SEMMNU opt_sysvipc.h 106SEMMSL opt_sysvipc.h 107SEMOPM opt_sysvipc.h 108SEMUME opt_sysvipc.h 109MSGMNB opt_sysvipc.h 110MSGMNI opt_sysvipc.h 111MSGSEG opt_sysvipc.h 112MSGSSZ opt_sysvipc.h 113MSGTQL opt_sysvipc.h 114UCONSOLE 115ICMP_BANDLIM 116SHOW_BUSYBUFS 117DIRECTIO opt_directio.h 118 119# POSIX kernel options 120P1003_1B opt_posix.h 121_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 122_KPOSIX_VERSION opt_posix.h 123 124# Do we want the config file compiled into the kernel? 125INCLUDE_CONFIG_FILE opt_config.h 126 127# Options for static file systems. These should only be used at config 128# time, since the corresponding lkms cannot work if there are any static 129# dependencies. Unusability is enforced by hiding the defines for the 130# options in a never-included header. 131EXT2FS opt_dontuse.h 132FDESC opt_dontuse.h 133HAMMER opt_dontuse.h 134HPFS opt_dontuse.h 135MFS opt_dontuse.h 136MSDOSFS opt_dontuse.h 137NTFS opt_dontuse.h 138NULLFS opt_dontuse.h 139NWFS opt_dontuse.h 140PORTAL opt_dontuse.h 141PROCFS opt_dontuse.h 142PUFFS opt_dontuse.h 143SMBFS opt_dontuse.h 144TMPFS opt_dontuse.h 145UDF opt_dontuse.h 146 147# These static filesystems has one slightly bogus static dependency in 148# sys/platform/.../i386/autoconf.c. If any of these filesystems are 149# statically compiled into the kernel, code for mounting them as root 150# filesystems will be enabled - but look below. Boot-code is purposely 151# unavailable for the LKM-based versions. 152CD9660 153FFS 154NFS 155 156# filesystems and libiconv bridge 157CD9660_ICONV opt_dontuse.h 158MSDOSFS_ICONV opt_dontuse.h 159NTFS_ICONV opt_dontuse.h 160 161# SMB/CIFS requester 162NETSMB opt_netsmb.h 163NETSMBCRYPTO opt_netsmb.h 164 165# If you are following the conditions in the copyright, 166# you can enable soft-updates which will speed up a lot of things 167# and make the system safer from crashes at the same time. 168# otherwise a STUB module will be compiled in. 169SOFTUPDATES opt_ffs.h 170 171# Enable fast hash lookups for large directories on UFS-based filesystems. 172UFS_DIRHASH opt_ufs.h 173 174# The above static dependencies are planned removed, with a 175# <filesystem>_ROOT option to control if it usable as root. This list 176# allows these options to be present in config files already (though 177# they won't make any difference yet). 178FFS_ROOT opt_ffs.h 179NFS_ROOT opt_nfsroot.h 180 181# The union static file system has bogus static dependencies, so it isn't 182# hidden yet. 183UNION 184 185# Options used only in subr_param.c. 186HZ opt_param.h 187MAXFILES opt_param.h 188NBUF opt_param.h 189NMBCLUSTERS opt_param.h 190NMBUFS opt_param.h 191VM_BCACHE_SIZE_MAX opt_param.h 192VM_SWZONE_SIZE_MAX opt_param.h 193MAXUSERS 194DFLDSIZ opt_param.h 195MAXDSIZ opt_param.h 196MAXSSIZ opt_param.h 197 198# Generic SCSI options. 199CAM_MAX_HIGHPOWER opt_cam.h 200CAMDEBUG opt_cam.h 201CAM_DEBUG_DELAY opt_cam.h 202CAM_DEBUG_BUS opt_cam.h 203CAM_DEBUG_TARGET opt_cam.h 204CAM_DEBUG_LUN opt_cam.h 205CAM_DEBUG_FLAGS opt_cam.h 206SCSI_DELAY opt_scsi.h 207SCSI_NO_SENSE_STRINGS opt_scsi.h 208SCSI_NO_OP_STRINGS opt_scsi.h 209 210# iSCSI options 211ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 212 213# Options used only in cam/scsi/scsi_cd.c 214CHANGER_MIN_BUSY_SECONDS opt_cd.h 215CHANGER_MAX_BUSY_SECONDS opt_cd.h 216 217# Options used only in cam/scsi/scsi_sa.c. 218SA_IO_TIMEOUT opt_sa.h 219SA_SPACE_TIMEOUT opt_sa.h 220SA_REWIND_TIMEOUT opt_sa.h 221SA_ERASE_TIMEOUT opt_sa.h 222SA_1FM_AT_EOD opt_sa.h 223 224# Options used only in cam/scsi/scsi_pt.c 225SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 226 227# Options used only in cam/scsi/scsi_ses.c 228SES_ENABLE_PASSTHROUGH opt_ses.h 229 230# Options used in dev/sym/ (Symbios SCSI driver). 231SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 232 # Allows the ncr to take precedence 233 # 1 (1<<0) -> 810a, 860 234 # 2 (1<<1) -> 825a, 875, 885, 895 235 # 4 (1<<2) -> 895a, 896, 1510d 236SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 237 # disabled:0 (default), enabled:1 238SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 239 # disabled:0, enabled:1 (default) 240SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 241 # default:8, range:[1..64] 242 243# Options used only in pci/ncr.c 244SCSI_NCR_DEBUG opt_ncr.h 245SCSI_NCR_MAX_SYNC opt_ncr.h 246SCSI_NCR_MAX_WIDE opt_ncr.h 247SCSI_NCR_MYADDR opt_ncr.h 248 249# Options used only in pci/isp_pci.c 250ISP_TARGET_MODE opt_isp.h 251 252# Options used in the 'nata' ATA/ATAPI driver 253ATA_STATIC_ID opt_ata.h 254 255# Net stuff. 256# altq stuff 257ALTQ opt_global.h 258ALTQ_CBQ opt_altq.h 259ALTQ_RED opt_altq.h 260ALTQ_RIO opt_altq.h 261ALTQ_HFSC opt_altq.h 262ALTQ_PRIQ opt_altq.h 263ALTQ_FAIRQ opt_altq.h 264ALTQ_NOPCC opt_altq.h 265ALTQ_DEBUG opt_altq.h 266 267ACCEPT_FILTER_DATA 268ACCEPT_FILTER_HTTP 269BOOTP opt_bootp.h 270BOOTP_COMPAT opt_bootp.h 271BOOTP_NFSROOT opt_bootp.h 272BOOTP_NFSV3 opt_bootp.h 273BOOTP_WIRED_TO opt_bootp.h 274CARP opt_carp.h 275ETHER_II opt_ef.h 276ETHER_8023 opt_ef.h 277ETHER_8022 opt_ef.h 278ETHER_SNAP opt_ef.h 279MROUTING opt_mrouting.h 280PIM opt_mrouting.h 281INET opt_inet.h 282INET6 opt_inet6.h 283IPSEC opt_ipsec.h 284IPSEC_ESP opt_ipsec.h 285IPSEC_DEBUG opt_ipsec.h 286IPSEC_FILTERGIF opt_ipsec.h 287FAST_IPSEC opt_ipsec.h 288IPDIVERT 289DUMMYNET opt_ipdn.h 290DUMMYNET_DEBUG opt_ipdn.h 291IPFIREWALL opt_ipfw.h 292IPFIREWALL_DEBUG opt_ipfw.h 293IPFIREWALL_VERBOSE opt_ipfw.h 294IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 295IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 296IPV6FIREWALL opt_ip6fw.h 297IPV6FIREWALL_VERBOSE opt_ip6fw.h 298IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 299IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 300IPSTEALTH 301IPX opt_ipx.h 302IPXIP opt_ipx.h 303IPTUNNEL opt_ipx.h 304LIBMCHAIN 305MPLS opt_mpls.h 306NCP opt_ncp.h 307PPP_BSDCOMP opt_ppp.h 308PPP_DEFLATE opt_ppp.h 309PPP_FILTER opt_ppp.h 310SLIP_IFF_OPTS opt_slip.h 311TCPDEBUG 312TCP_SIGNATURE opt_inet.h 313TCP_DROP_SYNFIN opt_tcp_input.h 314 315XBONEHACK 316MBUF_STRESS_TEST opt_mbuf_stress_test.h 317 318# (New netgraph, port still in progress) 319# 320# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 321# Each netgraph node type can be either be compiled into the kernel 322# or loaded dynamically. To get the former, include the corresponding 323# option below. Each type has its own man page, e.g. ng_async(4). 324NETGRAPH7 325NETGRAPH7_DEBUG opt_netgraph.h 326NETGRAPH7_ASYNC opt_netgraph.h 327NETGRAPH7_ATMLLC opt_netgraph.h 328NETGRAPH7_ATM_ATMPIF opt_netgraph.h 329NETGRAPH7_BLUETOOTH opt_netgraph.h 330NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 331NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 332NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 333NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 334NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 335NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 336NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 337NETGRAPH7_BPF opt_netgraph.h 338NETGRAPH7_BRIDGE opt_netgraph.h 339NETGRAPH7_CAR opt_netgraph.h 340NETGRAPH7_CISCO opt_netgraph.h 341NETGRAPH7_DEFLATE opt_netgraph.h 342NETGRAPH7_DEVICE opt_netgraph.h 343NETGRAPH7_ECHO opt_netgraph.h 344NETGRAPH7_EIFACE opt_netgraph.h 345NETGRAPH7_ETF opt_netgraph.h 346NETGRAPH7_ETHER opt_netgraph.h 347NETGRAPH7_FEC opt_netgraph.h 348NETGRAPH7_FRAME_RELAY opt_netgraph.h 349NETGRAPH7_GIF opt_netgraph.h 350NETGRAPH7_GIF_DEMUX opt_netgraph.h 351NETGRAPH7_HOLE opt_netgraph.h 352NETGRAPH7_HUB opt_netgraph.h 353NETGRAPH7_IFACE opt_netgraph.h 354NETGRAPH7_IP_INPUT opt_netgraph.h 355NETGRAPH7_IPFW opt_netgraph.h 356NETGRAPH7_KSOCKET opt_netgraph.h 357NETGRAPH7_L2TP opt_netgraph.h 358NETGRAPH7_LMI opt_netgraph.h 359# MPPC compression requires proprietary files (not included) 360NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 361NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 362NETGRAPH7_NAT opt_netgraph.h 363NETGRAPH7_NETFLOW opt_netgraph.h 364NETGRAPH7_ONE2MANY opt_netgraph.h 365NETGRAPH7_PPP opt_netgraph.h 366NETGRAPH7_PPPOE opt_netgraph.h 367NETGRAPH7_PPTPGRE opt_netgraph.h 368NETGRAPH7_PRED1 opt_netgraph.h 369NETGRAPH7_RFC1490 opt_netgraph.h 370NETGRAPH7_SOCKET opt_netgraph.h 371NETGRAPH7_SPLIT opt_netgraph.h 372NETGRAPH7_SPPP opt_netgraph.h 373NETGRAPH7_TAG opt_netgraph.h 374NETGRAPH7_TCPMSS opt_netgraph.h 375NETGRAPH7_TEE opt_netgraph.h 376NETGRAPH7_TTY opt_netgraph.h 377NETGRAPH7_UI opt_netgraph.h 378NETGRAPH7_VJC opt_netgraph.h 379 380# NgATM options 381NGATM7_ATM opt_netgraph.h 382NGATM7_ATMBASE opt_netgraph.h 383NGATM7_SSCOP opt_netgraph.h 384NGATM7_SSCFU opt_netgraph.h 385NGATM7_UNI opt_netgraph.h 386NGATM7_CCATM opt_netgraph.h 387 388# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 389# Each netgraph node type can be either be compiled into the kernel 390# or loaded dynamically. To get the former, include the corresponding 391# option below. Each type has its own man page, e.g. ng_async(8). 392NETGRAPH 393NETGRAPH_ASYNC opt_netgraph.h 394NETGRAPH_BPF opt_netgraph.h 395NETGRAPH_BRIDGE opt_netgraph.h 396NETGRAPH_CISCO opt_netgraph.h 397NETGRAPH_ECHO opt_netgraph.h 398NETGRAPH_EIFACE opt_netgraph.h 399NETGRAPH_ETHER opt_netgraph.h 400NETGRAPH_FRAME_RELAY opt_netgraph.h 401NETGRAPH_HOLE opt_netgraph.h 402NETGRAPH_IFACE opt_netgraph.h 403NETGRAPH_KSOCKET opt_netgraph.h 404NETGRAPH_LMI opt_netgraph.h 405NETGRAPH_L2TP opt_netgraph.h 406# MPPC compression requires proprietary files (not included) 407NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 408NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 409NETGRAPH_ONE2MANY opt_netgraph.h 410NETGRAPH_PPP opt_netgraph.h 411NETGRAPH_PPPOE opt_netgraph.h 412NETGRAPH_PPTPGRE opt_netgraph.h 413NETGRAPH_RFC1490 opt_netgraph.h 414NETGRAPH_SOCKET opt_netgraph.h 415NETGRAPH_TEE opt_netgraph.h 416NETGRAPH_TTY opt_netgraph.h 417NETGRAPH_UI opt_netgraph.h 418NETGRAPH_VJC opt_netgraph.h 419 420# AGP options 421AGP_DEBUG opt_agp.h 422 423# DRM options 424DRM_DEBUG opt_drm.h 425DRM_LINUX opt_drm.h 426 427# ATM (HARP version) 428ATM_CORE opt_atm.h 429ATM_IP opt_atm.h 430ATM_SIGPVC opt_atm.h 431ATM_SPANS opt_atm.h 432ATM_UNI opt_atm.h 433 434# XXX Conflict: # of devices vs network protocol (Native ATM). 435# This makes "atm.h" unusable. 436NATM opt_natm.h 437 438# DPT driver debug flags 439DPT_MEASURE_PERFORMANCE opt_dpt.h 440DPT_HANDLE_TIMEOUTS opt_dpt.h 441DPT_TIMEOUT_FACTOR opt_dpt.h 442DPT_LOST_IRQ opt_dpt.h 443DPT_RESET_HBA opt_dpt.h 444 445# Misc debug flags. Most of these should probably be replaced with 446# 'DEBUG', and then let people recompile just the interesting modules 447# with 'make CC="cc -DDEBUG"'. 448CLUSTERDEBUG opt_debug_cluster.h 449DEBUG_1284 opt_ppb_1284.h 450VP0_DEBUG opt_vpo.h 451LPT_DEBUG opt_lpt.h 452PLIP_DEBUG opt_plip.h 453LOCKF_DEBUG opt_debug_lockf.h 454NPX_DEBUG opt_debug_npx.h 455SI_DEBUG opt_debug_si.h 456 457# Fb options 458FB_DEBUG opt_fb.h 459FB_INSTALL_CDEV opt_fb.h 460 461# ppbus related options 462PERIPH_1284 opt_ppb_1284.h 463DONTPROBE_1284 opt_ppb_1284.h 464 465# smbus related options 466ENABLE_ALART opt_intpm.h 467 468# These cause changes all over the kernel 469NO_LWKT_SPLIT_USERPRI opt_global.h 470BLKDEV_IOSIZE opt_global.h 471DEBUG opt_global.h 472DEBUG_LOCKS opt_global.h 473DEBUG_LOCKS_LATENCY opt_global.h 474DEBUG_CRIT_SECTIONS opt_global.h 475DIAGNOSTIC opt_global.h 476INVARIANTS opt_global.h 477VFS_BIO_DEBUG opt_global.h 478DEBUG_INTERRUPTS opt_global.h 479SOCKBUF_DEBUG opt_global.h 480PANIC_DEBUG opt_global.h 481MBUF_DEBUG opt_global.h 482PMAP_DEBUG opt_global.h 483VM_PAGE_DEBUG opt_global.h 484SLAB_DEBUG opt_global.h 485 486# Sample system/interrupt PC 487DEBUG_PCTRACK opt_pctrack.h 488 489# These are VM related options 490NO_SWAPPING opt_vm.h 491 492# sys/netkey 493KEY 494 495# Size of the kernel message buffer 496MSGBUF_SIZE opt_msgbuf.h 497 498# PCI related options 499COMPAT_OLDPCI 500 501# NFS options 502NFS_MINATTRTIMO opt_nfs.h 503NFS_MAXATTRTIMO opt_nfs.h 504NFS_MINDIRATTRTIMO opt_nfs.h 505NFS_MAXDIRATTRTIMO opt_nfs.h 506NFS_GATHERDELAY opt_nfs.h 507NFS_UIDHASHSIZ opt_nfs.h 508NFS_WDELAYHASHSIZ opt_nfs.h 509NFS_MUIDHASHSIZ opt_nfs.h 510NFS_NOSERVER opt_nfs.h 511NFS_DEBUG opt_nfs.h 512 513# MSDOSFS options 514MSDOSFS_DEBUG opt_msdosfs.h 515 516# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 517BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 518BROOKTREE_ALLOC_PAGES opt_bktr.h 519BKTR_OVERRIDE_CARD opt_bktr.h 520BKTR_OVERRIDE_TUNER opt_bktr.h 521BKTR_OVERRIDE_DBX opt_bktr.h 522BKTR_OVERRIDE_MSP opt_bktr.h 523BKTR_SYSTEM_DEFAULT opt_bktr.h 524BKTR_ALLOC_PAGES opt_bktr.h 525BKTR_USE_PLL opt_bktr.h 526BKTR_GPIO_ACCESS opt_bktr.h 527BKTR_NO_MSP_RESET opt_bktr.h 528BKTR_430_FX_MODE opt_bktr.h 529BKTR_SIS_VIA_MODE opt_bktr.h 530BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 531 532# Various mi ISA bus flags 533COM_ESP opt_sio.h 534COM_MULTIPORT opt_sio.h 535BREAK_TO_DEBUGGER opt_comconsole.h 536ALT_BREAK_TO_DEBUGGER opt_comconsole.h 537 538# options for bus/device framework 539BUS_DEBUG opt_bus.h 540 541# options for USB support 542OHCI_DEBUG opt_usb.h 543USB_DEBUG opt_usb.h 544 545# Vinum options 546VINUMDEBUG opt_vinum.h 547 548# Embedded system options 549UKBD_DFLT_KEYMAP opt_ukbd.h 550INIT_PATH opt_init_path.h 551 552ROOTDEVNAME opt_rootdevname.h 553 554FDC_DEBUG opt_fdc.h 555PCFCLOCK_VERBOSE opt_pcfclock.h 556PCFCLOCK_MAX_RETRIES opt_pcfclock.h 557 558# Network device queue based polling 559IFPOLL_ENABLE opt_ifpoll.h 560 561# options for ubsec driver 562UBSEC_DEBUG opt_ubsec.h 563UBSEC_RNDTEST opt_ubsec.h 564UBSEC_NO_RNG opt_ubsec.h 565 566# options for hifn driver 567HIFN_DEBUG opt_hifn.h 568HIFN_RNDTEST opt_hifn.h 569HIFN_NO_RNG opt_hifn.h 570 571# options for safenet driver 572SAFE_DEBUG opt_safe.h 573SAFE_NO_RNG opt_safe.h 574SAFE_RNDTEST opt_safe.h 575 576# KTR options 577KTR opt_global.h 578KTR_ENTRIES opt_global.h 579KTR_ALL opt_ktr.h 580KTR_CTXSW opt_ktr.h 581KTR_DMCRYPT opt_ktr.h 582KTR_DSCHED_BFQ opt_ktr.h 583KTR_ETHERNET opt_ktr.h 584KTR_HAMMER opt_ktr.h 585KTR_IFQ opt_ktr.h 586KTR_IF_BGE opt_ktr.h 587KTR_IF_EM opt_ktr.h 588KTR_IF_EMX opt_ktr.h 589KTR_IF_START opt_ktr.h 590KTR_IPIQ opt_ktr.h 591KTR_KERNENTRY opt_ktr.h 592KTR_MEMORY opt_ktr.h 593KTR_SERIALIZER opt_ktr.h 594KTR_SPIN_CONTENTION opt_ktr.h 595KTR_TESTLOG opt_ktr.h 596KTR_TOKENS opt_ktr.h 597KTR_TSLEEP opt_ktr.h 598KTR_USB_MEMORY opt_ktr.h 599KTR_USCHED_BSD4 opt_ktr.h 600KTR_USCHED_DFLY opt_ktr.h 601KTR_VERBOSE opt_ktr.h 602 603# NTFS options 604NTFS_DEBUG opt_ntfs.h 605 606# options for the Atheros driver 607ATH_DEBUG opt_ath.h 608ATH_DIAGAPI opt_ath.h 609ATH_RXBUF opt_ath.h 610ATH_TXBUF opt_ath.h 611 612# ...and its HAL 613AH_SUPPORT_AR5416 opt_ah.h 614 615# bce driver 616BCE_DEBUG opt_bce.h 617 618# bnx driver 619BNX_TSO_DEBUG opt_bnx.h 620 621# ed driver 622ED_NO_MIIBUS opt_ed.h 623 624# emx driver 625EMX_RSS_DEBUG opt_emx.h 626EMX_TSO_DEBUG opt_emx.h 627 628# jme driver 629JME_RSS_DEBUG opt_jme.h 630 631# igb driver 632IGB_RSS_DEBUG opt_igb.h 633IGB_MSIX_DEBUG opt_igb.h 634 635# dcons options 636DCONS_BUF_SIZE opt_dcons.h 637DCONS_POLL_HZ opt_dcons.h 638DCONS_FORCE_CONSOLE opt_dcons.h 639DCONS_FORCE_GDB opt_dcons.h 640 641# deprecated drivers and options 642I_WANT_DEPRECATED_STUFF opt_deprecated.h 643 644# SCTP 645SCTP opt_sctp.h 646SCTP_DEBUG opt_sctp.h 647SCTP_USE_ADLER32 opt_sctp.h 648SCTP_HIGH_SPEED opt_sctp.h 649SCTP_STAT_LOGGING opt_sctp.h 650SCTP_CWND_LOGGING opt_sctp.h 651SCTP_BLK_LOGGING opt_sctp.h 652SCTP_STR_LOGGING opt_sctp.h 653SCTP_FR_LOGGING opt_sctp.h 654SCTP_MAP_LOGGING opt_sctp.h 655 656# syslink kernel support 657# 658SYSLINK opt_syslink.h 659 660# DSCHED stuff 661DSCHED_AS opt_dsched.h 662DSCHED_BFQ opt_dsched.h 663DSCHED_FQ opt_dsched.h 664 665# Receive Side Scaling (now basecode) 666RSS_DEBUG opt_rss.h 667 668# Panic settings 669WDOG_DISABLE_ON_PANIC opt_panic.h 670ERROR_LED_ON_PANIC opt_panic.h 671 672# 802.11 support layer 673IEEE80211_DEBUG opt_wlan.h 674IEEE80211_DEBUG_REFCNT opt_wlan.h 675IEEE80211_AMPDU_AGE opt_wlan.h 676IEEE80211_SUPPORT_MESH opt_wlan.h 677IEEE80211_SUPPORT_SUPERG opt_wlan.h 678IEEE80211_SUPPORT_TDMA opt_wlan.h 679 680# 802.11 TDMA support 681TDMA_SLOTLEN_DEFAULT opt_tdma.h 682TDMA_SLOTCNT_DEFAULT opt_tdma.h 683TDMA_BINTVAL_DEFAULT opt_tdma.h 684TDMA_TXRATE_11B_DEFAULT opt_tdma.h 685TDMA_TXRATE_11G_DEFAULT opt_tdma.h 686TDMA_TXRATE_11A_DEFAULT opt_tdma.h 687TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 688TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 689TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 690TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 691TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 692 693PANIC_REBOOT_WAIT_TIME opt_panic.h 694 695# Obsolete options (will be removed in the future) 696# 697DEVICE_POLLING opt_dontuse.h 698SMP opt_dontuse.h 699