1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 37 # mapped I/O 38AMR_DEBUG opt_amr.h 39TWA_DEBUG opt_twa.h 40 41#options for ACPI support 42ACPI_DEBUG opt_acpi.h 43ACPI_NO_SEMAPHORES opt_acpi.h 44ACPI_ENABLE_PCI opt_acpi.h 45 46# Miscellaneous options. 47COMPILING_LINT opt_lint.h 48DDB 49DDB_TRACE 50DDB_UNATTENDED opt_ddb.h 51GDB_REMOTE_CHAT opt_ddb.h 52KTRACE 53LIBICONV 54MD_NSECT opt_md.h 55MD_ROOT opt_md.h 56MD_ROOT_SIZE opt_md.h 57MFI_DEBUG opt_mfi.h 58NSWAPDEV opt_swap.h 59NSWBUF_MIN opt_swap.h 60PPS_SYNC opt_ntp.h 61QUOTA 62SUIDDIR opt_suiddir.h 63SHMMIN opt_sysvipc.h 64SHMMNI opt_sysvipc.h 65SHMSEG opt_sysvipc.h 66SEMMAP opt_sysvipc.h 67SEMMNI opt_sysvipc.h 68SEMMNS opt_sysvipc.h 69SEMMNU opt_sysvipc.h 70SEMMSL opt_sysvipc.h 71SEMOPM opt_sysvipc.h 72SEMUME opt_sysvipc.h 73MSGMNB opt_sysvipc.h 74MSGMNI opt_sysvipc.h 75MSGSEG opt_sysvipc.h 76MSGSSZ opt_sysvipc.h 77MSGTQL opt_sysvipc.h 78NO_SYSCTL_DESCR opt_global.h 79UCONSOLE 80ICMP_BANDLIM 81 82# POSIX kernel options 83_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 84 85# Do we want the config file compiled into the kernel? 86INCLUDE_CONFIG_FILE opt_config.h 87 88# Options for static file systems. These should only be used at config 89# time, since the corresponding lkms cannot work if there are any static 90# dependencies. Unusability is enforced by hiding the defines for the 91# options in a never-included header. 92EXT2FS opt_dontuse.h 93HAMMER opt_dontuse.h 94HAMMER2 opt_dontuse.h 95HPFS opt_dontuse.h 96MFS opt_dontuse.h 97MSDOSFS opt_dontuse.h 98NTFS opt_dontuse.h 99NULLFS opt_dontuse.h 100PROCFS opt_dontuse.h 101SMBFS opt_dontuse.h 102TMPFS opt_dontuse.h 103UDF opt_dontuse.h 104AUTOFS opt_dontuse.h 105FUSE opt_dontuse.h 106 107# These static filesystems has one slightly bogus static dependency in 108# sys/platform/.../x86_64/autoconf.c. If any of these filesystems are 109# statically compiled into the kernel, code for mounting them as root 110# filesystems will be enabled - but look below. Boot-code is purposely 111# unavailable for the LKM-based versions. 112CD9660 113FFS 114NFS 115 116# filesystems and libiconv bridge 117CD9660_ICONV opt_dontuse.h 118MSDOSFS_ICONV opt_dontuse.h 119NTFS_ICONV opt_dontuse.h 120 121# SMB/CIFS requester 122NETSMB opt_netsmb.h 123 124# If you are following the conditions in the copyright, 125# you can enable soft-updates which will speed up a lot of things 126# and make the system safer from crashes at the same time. 127# otherwise a STUB module will be compiled in. 128SOFTUPDATES opt_ffs.h 129 130# Enable fast hash lookups for large directories on UFS-based filesystems. 131UFS_DIRHASH opt_ufs.h 132 133# The above static dependencies are planned removed, with a 134# <filesystem>_ROOT option to control if it usable as root. This list 135# allows these options to be present in config files already (though 136# they won't make any difference yet). 137NFS_ROOT opt_nfsroot.h 138 139# Options used only in subr_param.c. 140HZ opt_param.h 141MAXFILES opt_param.h 142NBUF opt_param.h 143NMBCLUSTERS opt_param.h 144NMBUFS opt_param.h 145VM_BCACHE_SIZE_MAX opt_param.h 146VM_SWZONE_SIZE_MAX opt_param.h 147MAXUSERS 148DFLDSIZ opt_param.h 149MAXDSIZ opt_param.h 150MAXSSIZ opt_param.h 151 152# Generic SCSI options. 153CAM_MAX_HIGHPOWER opt_cam.h 154CAMDEBUG opt_cam.h 155CAM_DEBUG_DELAY opt_cam.h 156CAM_DEBUG_BUS opt_cam.h 157CAM_DEBUG_TARGET opt_cam.h 158CAM_DEBUG_LUN opt_cam.h 159CAM_DEBUG_FLAGS opt_cam.h 160SCSI_DELAY opt_scsi.h 161SCSI_NO_SENSE_STRINGS opt_scsi.h 162SCSI_NO_OP_STRINGS opt_scsi.h 163 164# iSCSI options 165ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 166 167# Options used only in cam/scsi/scsi_cd.c 168CHANGER_MIN_BUSY_SECONDS opt_cd.h 169CHANGER_MAX_BUSY_SECONDS opt_cd.h 170 171# Options used only in cam/scsi/scsi_sa.c. 172SA_IO_TIMEOUT opt_sa.h 173SA_SPACE_TIMEOUT opt_sa.h 174SA_REWIND_TIMEOUT opt_sa.h 175SA_ERASE_TIMEOUT opt_sa.h 176SA_1FM_AT_EOD opt_sa.h 177 178# Options used only in cam/scsi/scsi_pt.c 179SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 180 181# Options used only in cam/scsi/scsi_ses.c 182SES_ENABLE_PASSTHROUGH opt_ses.h 183 184# Options used in dev/sym/ (Symbios SCSI driver). 185SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 186 # Allows the ncr to take precedence 187 # 1 (1<<0) -> 810a, 860 188 # 2 (1<<1) -> 825a, 875, 885, 895 189 # 4 (1<<2) -> 895a, 896, 1510d 190SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 191 # disabled:0 (default), enabled:1 192SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 193 # disabled:0, enabled:1 (default) 194SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 195 # default:8, range:[1..64] 196 197# Options used only in pci/ncr.c 198SCSI_NCR_DEBUG opt_ncr.h 199SCSI_NCR_MAX_SYNC opt_ncr.h 200SCSI_NCR_MAX_WIDE opt_ncr.h 201SCSI_NCR_MYADDR opt_ncr.h 202 203# Options used only in pci/isp_pci.c 204ISP_TARGET_MODE opt_isp.h 205 206# Options used in the 'nata' ATA/ATAPI driver 207ATA_STATIC_ID opt_ata.h 208 209# Options used in the 'nata' chipset driver 210ATA_NO_ACARD opt_ata.h 211ATA_NO_ACERLABS opt_ata.h 212ATA_NO_AHCI opt_ata.h 213ATA_NO_AMD opt_ata.h 214ATA_NO_CYPRESS opt_ata.h 215ATA_NO_CYRIX opt_ata.h 216ATA_NO_HIGHPOINT opt_ata.h 217ATA_NO_INTEL opt_ata.h 218ATA_NO_ITE opt_ata.h 219ATA_NO_JMICRON opt_ata.h 220ATA_NO_MARVELL opt_ata.h 221ATA_NO_NATIONAL opt_ata.h 222ATA_NO_NETCELL opt_ata.h 223ATA_NO_NVIDIA opt_ata.h 224ATA_NO_PROMISE opt_ata.h 225ATA_NO_SERVERWORKS opt_ata.h 226ATA_NO_SILICONIMAGE opt_ata.h 227ATA_NO_SIS opt_ata.h 228ATA_NO_VIA opt_ata.h 229 230# Net stuff. 231# altq stuff 232ALTQ opt_global.h 233ALTQ_CBQ opt_altq.h 234ALTQ_RED opt_altq.h 235ALTQ_RIO opt_altq.h 236ALTQ_HFSC opt_altq.h 237ALTQ_PRIQ opt_altq.h 238ALTQ_FAIRQ opt_altq.h 239ALTQ_NOPCC opt_altq.h 240ALTQ_DEBUG opt_altq.h 241 242ACCEPT_FILTER_DATA 243ACCEPT_FILTER_HTTP 244BOOTP opt_bootp.h 245BOOTP_COMPAT opt_bootp.h 246BOOTP_NFSROOT opt_bootp.h 247BOOTP_WIRED_TO opt_bootp.h 248CARP opt_carp.h 249MROUTING opt_mrouting.h 250PIM opt_mrouting.h 251INET opt_inet.h 252INET6 opt_inet6.h 253IPDIVERT 254DUMMYNET opt_ipdn.h 255DUMMYNET_DEBUG opt_ipdn.h 256IPFIREWALL opt_ipfw.h 257IPFIREWALL3 opt_ipfw.h 258IPFIREWALL_DEBUG opt_ipfw.h 259IPFIREWALL_VERBOSE opt_ipfw.h 260IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 261IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 262IPV6FIREWALL opt_ip6fw.h 263IPV6FIREWALL_VERBOSE opt_ip6fw.h 264IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 265IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 266IPSTEALTH 267LIBMCHAIN 268MPLS opt_mpls.h 269TCPDEBUG 270#TCP_SIGNATURE opt_inet.h 271TCP_DROP_SYNFIN opt_tcp_input.h 272ICMPPRINTFS 273 274XBONEHACK 275MBUF_STRESS_TEST opt_mbuf_stress_test.h 276 277# (New netgraph, port still in progress) 278# 279# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 280# Each netgraph node type can be either be compiled into the kernel 281# or loaded dynamically. To get the former, include the corresponding 282# option below. Each type has its own man page, e.g. ng_async(4). 283NETGRAPH7 284NETGRAPH7_DEBUG opt_netgraph.h 285NETGRAPH7_ASYNC opt_netgraph.h 286NETGRAPH7_ATMLLC opt_netgraph.h 287NETGRAPH7_ATM_ATMPIF opt_netgraph.h 288NETGRAPH7_BLUETOOTH opt_netgraph.h 289NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 290NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 291NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 292NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 293NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 294NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 295NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 296NETGRAPH7_BPF opt_netgraph.h 297NETGRAPH7_BRIDGE opt_netgraph.h 298NETGRAPH7_CAR opt_netgraph.h 299NETGRAPH7_CISCO opt_netgraph.h 300NETGRAPH7_DEFLATE opt_netgraph.h 301NETGRAPH7_DEVICE opt_netgraph.h 302NETGRAPH7_ECHO opt_netgraph.h 303NETGRAPH7_EIFACE opt_netgraph.h 304NETGRAPH7_ETF opt_netgraph.h 305NETGRAPH7_ETHER opt_netgraph.h 306NETGRAPH7_FEC opt_netgraph.h 307NETGRAPH7_FRAME_RELAY opt_netgraph.h 308NETGRAPH7_GIF opt_netgraph.h 309NETGRAPH7_GIF_DEMUX opt_netgraph.h 310NETGRAPH7_HOLE opt_netgraph.h 311NETGRAPH7_HUB opt_netgraph.h 312NETGRAPH7_IFACE opt_netgraph.h 313NETGRAPH7_IP_INPUT opt_netgraph.h 314NETGRAPH7_IPFW opt_netgraph.h 315NETGRAPH7_KSOCKET opt_netgraph.h 316NETGRAPH7_L2TP opt_netgraph.h 317NETGRAPH7_LMI opt_netgraph.h 318# MPPC compression requires proprietary files (not included) 319NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 320NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 321NETGRAPH7_NAT opt_netgraph.h 322NETGRAPH7_NETFLOW opt_netgraph.h 323NETGRAPH7_ONE2MANY opt_netgraph.h 324NETGRAPH7_PPP opt_netgraph.h 325NETGRAPH7_PPPOE opt_netgraph.h 326NETGRAPH7_PPTPGRE opt_netgraph.h 327NETGRAPH7_PRED1 opt_netgraph.h 328NETGRAPH7_RFC1490 opt_netgraph.h 329NETGRAPH7_SOCKET opt_netgraph.h 330NETGRAPH7_SPLIT opt_netgraph.h 331NETGRAPH7_SPPP opt_netgraph.h 332NETGRAPH7_TAG opt_netgraph.h 333NETGRAPH7_TCPMSS opt_netgraph.h 334NETGRAPH7_TEE opt_netgraph.h 335NETGRAPH7_TTY opt_netgraph.h 336NETGRAPH7_UI opt_netgraph.h 337NETGRAPH7_VJC opt_netgraph.h 338 339# NgATM options 340NGATM7_ATM opt_netgraph.h 341NGATM7_ATMBASE opt_netgraph.h 342NGATM7_SSCOP opt_netgraph.h 343NGATM7_SSCFU opt_netgraph.h 344NGATM7_UNI opt_netgraph.h 345NGATM7_CCATM opt_netgraph.h 346 347# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 348# Each netgraph node type can be either be compiled into the kernel 349# or loaded dynamically. To get the former, include the corresponding 350# option below. Each type has its own man page, e.g. ng_async(8). 351NETGRAPH 352NETGRAPH_ASYNC opt_netgraph.h 353NETGRAPH_BPF opt_netgraph.h 354NETGRAPH_BRIDGE opt_netgraph.h 355NETGRAPH_CISCO opt_netgraph.h 356NETGRAPH_ECHO opt_netgraph.h 357NETGRAPH_EIFACE opt_netgraph.h 358NETGRAPH_ETHER opt_netgraph.h 359NETGRAPH_FEC opt_netgraph.h 360NETGRAPH_FRAME_RELAY opt_netgraph.h 361NETGRAPH_HOLE opt_netgraph.h 362NETGRAPH_IFACE opt_netgraph.h 363NETGRAPH_KSOCKET opt_netgraph.h 364NETGRAPH_LMI opt_netgraph.h 365NETGRAPH_L2TP opt_netgraph.h 366# MPPC compression requires proprietary files (not included) 367NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 368NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 369NETGRAPH_ONE2MANY opt_netgraph.h 370NETGRAPH_PPP opt_netgraph.h 371NETGRAPH_PPPOE opt_netgraph.h 372NETGRAPH_PPTPGRE opt_netgraph.h 373NETGRAPH_RFC1490 opt_netgraph.h 374NETGRAPH_SOCKET opt_netgraph.h 375NETGRAPH_TEE opt_netgraph.h 376NETGRAPH_TTY opt_netgraph.h 377NETGRAPH_UI opt_netgraph.h 378NETGRAPH_VJC opt_netgraph.h 379 380# AGP options 381AGP_DEBUG opt_agp.h 382 383# DRM options 384DRM_DEBUG opt_drm.h 385VGA_SWITCHEROO opt_drm.h 386 387# DPT driver debug flags 388DPT_MEASURE_PERFORMANCE opt_dpt.h 389DPT_HANDLE_TIMEOUTS opt_dpt.h 390DPT_TIMEOUT_FACTOR opt_dpt.h 391DPT_LOST_IRQ opt_dpt.h 392DPT_RESET_HBA opt_dpt.h 393 394# Misc debug flags. Most of these should probably be replaced with 395# 'DEBUG', and then let people recompile just the interesting modules 396# with 'make CC="cc -DDEBUG"'. 397CLUSTERDEBUG opt_debug_cluster.h 398DEBUG_1284 opt_ppb_1284.h 399VP0_DEBUG opt_vpo.h 400LPT_DEBUG opt_lpt.h 401PLIP_DEBUG opt_plip.h 402LOCKF_DEBUG opt_debug_lockf.h 403 404# Fb options 405FB_DEBUG opt_fb.h 406FB_INSTALL_CDEV opt_fb.h 407 408# ppbus related options 409PERIPH_1284 opt_ppb_1284.h 410DONTPROBE_1284 opt_ppb_1284.h 411 412# smbus related options 413ENABLE_ALART opt_intpm.h 414 415# These cause changes all over the kernel 416NO_LWKT_SPLIT_USERPRI opt_global.h 417BLKDEV_IOSIZE opt_global.h 418DEBUG opt_global.h 419DEBUG_LOCKS opt_global.h 420DEBUG_LOCKS_LATENCY opt_global.h 421DEBUG_CRIT_SECTIONS opt_global.h 422DIAGNOSTIC opt_global.h 423INVARIANTS opt_global.h 424VFS_BIO_DEBUG opt_global.h 425SOCKBUF_DEBUG opt_global.h 426PANIC_DEBUG opt_global.h 427MBUF_DEBUG opt_global.h 428PMAP_DEBUG opt_global.h 429VM_PAGE_DEBUG opt_global.h 430SLAB_DEBUG opt_global.h 431 432# Sample system/interrupt PC 433DEBUG_PCTRACK opt_pctrack.h 434 435# These are VM related options 436NO_SWAPPING opt_vm.h 437 438# sys/netkey 439KEY 440 441# Size of the kernel message buffer 442MSGBUF_SIZE opt_msgbuf.h 443 444# NFS options 445NFS_MINATTRTIMO opt_nfs.h 446NFS_MAXATTRTIMO opt_nfs.h 447NFS_MINDIRATTRTIMO opt_nfs.h 448NFS_MAXDIRATTRTIMO opt_nfs.h 449NFS_GATHERDELAY opt_nfs.h 450NFS_UIDHASHSIZ opt_nfs.h 451NFS_WDELAYHASHSIZ opt_nfs.h 452NFS_MUIDHASHSIZ opt_nfs.h 453NFS_NOSERVER opt_nfs.h 454NFS_DEBUG opt_nfs.h 455 456# MSDOSFS options 457MSDOSFS_DEBUG opt_msdosfs.h 458 459# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 460BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 461BROOKTREE_ALLOC_PAGES opt_bktr.h 462BKTR_OVERRIDE_CARD opt_bktr.h 463BKTR_OVERRIDE_TUNER opt_bktr.h 464BKTR_OVERRIDE_DBX opt_bktr.h 465BKTR_OVERRIDE_MSP opt_bktr.h 466BKTR_SYSTEM_DEFAULT opt_bktr.h 467BKTR_ALLOC_PAGES opt_bktr.h 468BKTR_USE_PLL opt_bktr.h 469BKTR_GPIO_ACCESS opt_bktr.h 470BKTR_NO_MSP_RESET opt_bktr.h 471BKTR_430_FX_MODE opt_bktr.h 472BKTR_SIS_VIA_MODE opt_bktr.h 473BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 474 475# Various mi ISA bus flags 476COM_ESP opt_sio.h 477COM_MULTIPORT opt_sio.h 478BREAK_TO_DEBUGGER opt_comconsole.h 479ALT_BREAK_TO_DEBUGGER opt_comconsole.h 480 481# options for bus/device framework 482BUS_DEBUG opt_bus.h 483 484# options for USB support 485OHCI_DEBUG opt_usb.h 486USB_DEBUG opt_usb.h 487 488# options for the Realtek RTL8188*U/RTL8192CU driver (urtwn) 489URTWN_WITHOUT_UCODE opt_urtwn.h 490 491# Vinum options 492VINUMDEBUG opt_vinum.h 493 494# Embedded system options 495UKBD_DFLT_KEYMAP opt_ukbd.h 496INIT_PATH opt_init_path.h 497 498ROOTDEVNAME opt_rootdevname.h 499 500FDC_DEBUG opt_fdc.h 501PCFCLOCK_VERBOSE opt_pcfclock.h 502PCFCLOCK_MAX_RETRIES opt_pcfclock.h 503 504# Network device queue based polling 505IFPOLL_ENABLE opt_ifpoll.h 506 507# options for ubsec driver 508UBSEC_DEBUG opt_ubsec.h 509UBSEC_RNDTEST opt_ubsec.h 510UBSEC_NO_RNG opt_ubsec.h 511 512# options for hifn driver 513HIFN_DEBUG opt_hifn.h 514HIFN_RNDTEST opt_hifn.h 515HIFN_NO_RNG opt_hifn.h 516 517# options for safenet driver 518SAFE_DEBUG opt_safe.h 519SAFE_NO_RNG opt_safe.h 520SAFE_RNDTEST opt_safe.h 521 522# KTR options 523KTR opt_global.h 524KTR_ENTRIES opt_global.h 525KTR_ALL opt_ktr.h 526KTR_ACPI_EC opt_ktr.h 527KTR_CTXSW opt_ktr.h 528KTR_DMCRYPT opt_ktr.h 529KTR_ETHERNET opt_ktr.h 530KTR_HAMMER opt_ktr.h 531KTR_IFQ opt_ktr.h 532KTR_IF_BGE opt_ktr.h 533KTR_IF_EM opt_ktr.h 534KTR_IF_EMX opt_ktr.h 535KTR_IF_START opt_ktr.h 536KTR_IPIQ opt_ktr.h 537KTR_KERNENTRY opt_ktr.h 538KTR_LAPIC opt_ktr.h 539KTR_MEMORY opt_ktr.h 540KTR_SERIALIZER opt_ktr.h 541KTR_SPIN_CONTENTION opt_ktr.h 542KTR_TESTLOG opt_ktr.h 543KTR_TOKENS opt_ktr.h 544KTR_TSLEEP opt_ktr.h 545KTR_USCHED_BSD4 opt_ktr.h 546KTR_USCHED_DFLY opt_ktr.h 547KTR_VERBOSE opt_ktr.h 548KTR_IF_POLL opt_ktr.h 549KTR_UDP opt_ktr.h 550KTR_SOWAKEUP opt_ktr.h 551 552# NTFS options 553NTFS_DEBUG opt_ntfs.h 554 555# options for the Atheros driver 556ATH_DEBUG opt_ath.h 557#ATH_DEBUG_ALQ opt_ath.h 558ATH_DIAGAPI opt_ath.h 559#ATH_EEPROM_FIRMWARE opt_ath.h 560#ATH_ENABLE_11N opt_ath.h 561ATH_ENABLE_DFS opt_ath.h 562#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 563ATH_KTR_INTR_DEBUG opt_ath.h 564#ATH_TX99_DIAG opt_ath.h 565 566# ...and its HAL 567AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 568AH_ASSERT opt_ah.h 569AH_DEBUG opt_ah.h 570#AH_DEBUG_ALQ opt_ah.h 571#AH_DEBUG_COUNTRY opt_ah.h 572AH_INTERRUPT_DEBUGGING opt_ah.h 573AH_MAXCHAN opt_ah.h 574AH_NEED_DESC_SWAP opt_ah.h 575AH_PRIVATE_DIAG opt_ah.h 576AH_RXCFG_SDMAMW_4BYTES opt_ah.h 577AH_SUPPORT_AR5416 opt_ah.h 578AH_SUPPORT_AR9130 opt_ah.h 579AH_SUPPORT_AR9330 opt_ah.h 580AH_SUPPORT_AR9340 opt_ah.h 581AH_USE_INIPDGAIN opt_ah.h 582#AH_WRITE_EEPROM opt_ah.h 583#AH_WRITE_REGDOMAIN opt_ah.h 584 585# bce driver 586BCE_RSS_DEBUG opt_bce.h 587BCE_TSS_DEBUG opt_bce.h 588 589# bnx driver 590BNX_RSS_DEBUG opt_bnx.h 591BNX_TSO_DEBUG opt_bnx.h 592BNX_TSS_DEBUG opt_bnx.h 593 594# bwn driver 595BWN_DEBUG opt_bwn.h 596BWN_RXRING_SLOTS opt_bwn.h 597BWN_TXRING_SLOTS opt_bwn.h 598 599# siba_bwn driver 600SIBA_DEBUG opt_siba.h 601 602# emx driver 603EMX_RSS_DEBUG opt_emx.h 604EMX_TSO_DEBUG opt_emx.h 605EMX_TSS_DEBUG opt_emx.h 606 607# jme driver 608JME_RSS_DEBUG opt_jme.h 609 610# igb driver 611IGB_RSS_DEBUG opt_igb.h 612IGB_TSS_DEBUG opt_igb.h 613IGB_MSIX_DEBUG opt_igb.h 614 615# ix driver 616IX_RSS_DEBUG opt_ix.h 617 618# Options for the Intel 802.11ac wireless driver 619IWM_DEBUG opt_iwm.h 620 621# Options for the Intel 802.11n wireless driver 622IWN_DEBUG opt_iwn.h 623 624# Options for the Intel 3945ABG wireless driver 625WPI_DEBUG opt_wpi.h 626 627# dcons options 628DCONS_BUF_SIZE opt_dcons.h 629DCONS_POLL_HZ opt_dcons.h 630DCONS_FORCE_CONSOLE opt_dcons.h 631DCONS_FORCE_GDB opt_dcons.h 632 633# deprecated drivers and options 634I_WANT_DEPRECATED_STUFF opt_deprecated.h 635 636# Receive Side Scaling (now basecode) 637RSS_DEBUG opt_rss.h 638 639# Panic settings 640WDOG_DISABLE_ON_PANIC opt_panic.h 641ERROR_LED_ON_PANIC opt_panic.h 642 643# 802.11 support layer 644IEEE80211_DEBUG opt_wlan.h 645IEEE80211_DEBUG_REFCNT opt_wlan.h 646IEEE80211_SUPPORT_MESH opt_wlan.h 647IEEE80211_SUPPORT_SUPERG opt_wlan.h 648IEEE80211_SUPPORT_TDMA opt_wlan.h 649 650# 802.11 TDMA support 651TDMA_SLOTLEN_DEFAULT opt_tdma.h 652TDMA_SLOTCNT_DEFAULT opt_tdma.h 653TDMA_BINTVAL_DEFAULT opt_tdma.h 654TDMA_TXRATE_11B_DEFAULT opt_tdma.h 655TDMA_TXRATE_11G_DEFAULT opt_tdma.h 656TDMA_TXRATE_11A_DEFAULT opt_tdma.h 657TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 658TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 659TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 660TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 661TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 662 663# Sound options 664SND_DEBUG opt_snd.h 665SND_DIAGNOSTIC opt_snd.h 666SND_FEEDER_MULTIFORMAT opt_snd.h 667SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 668SND_FEEDER_RATE_HP opt_snd.h 669SND_OLDSTEREO opt_snd.h 670 671PANIC_REBOOT_WAIT_TIME opt_panic.h 672 673# This options turns TPM into entropy source. 674TPM_HARVEST opt_tpm.h 675 676# Evdev protocol support 677EVDEV_SUPPORT opt_evdev.h 678EVDEV_DEBUG opt_evdev.h 679 680# Sysctl debugging 681SYSCTL_DEBUG opt_sysctl.h 682 683# Obsolete options (will be removed in the future) 684# 685NDISAPI opt_dontuse.h 686