1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68TWA_DEBUG opt_twa.h 69 70#options for ACPI support 71ACPI_DEBUG opt_acpi.h 72ACPI_NO_SEMAPHORES opt_acpi.h 73ACPI_ENABLE_PCI opt_acpi.h 74 75# Miscellaneous options. 76COMPAT_DF12 opt_compatdf12.h 77COMPAT_43 opt_compat.h 78COMPAT_SUNOS opt_compat.h 79COMPILING_LINT opt_lint.h 80DDB 81DDB_TRACE 82DDB_UNATTENDED opt_ddb.h 83GDB_REMOTE_CHAT opt_ddb.h 84HW_WDOG 85KTRACE 86LIBICONV 87MD_NSECT opt_md.h 88MD_ROOT opt_md.h 89MD_ROOT_SIZE opt_md.h 90MFI_DEBUG opt_mfi.h 91NSWAPDEV opt_swap.h 92NSWBUF_MIN opt_swap.h 93PPS_SYNC opt_ntp.h 94QUOTA 95SUIDDIR opt_suiddir.h 96SYSVMSG opt_sysvipc.h 97SYSVSEM opt_sysvipc.h 98SYSVSHM opt_sysvipc.h 99SHMALL opt_sysvipc.h 100SHMMAX opt_sysvipc.h 101SHMMAXPGS opt_sysvipc.h 102SHMMIN opt_sysvipc.h 103SHMMNI opt_sysvipc.h 104SHMSEG opt_sysvipc.h 105SEMMAP opt_sysvipc.h 106SEMMNI opt_sysvipc.h 107SEMMNS opt_sysvipc.h 108SEMMNU opt_sysvipc.h 109SEMMSL opt_sysvipc.h 110SEMOPM opt_sysvipc.h 111SEMUME opt_sysvipc.h 112MSGMNB opt_sysvipc.h 113MSGMNI opt_sysvipc.h 114MSGSEG opt_sysvipc.h 115MSGSSZ opt_sysvipc.h 116MSGTQL opt_sysvipc.h 117UCONSOLE 118ICMP_BANDLIM 119SHOW_BUSYBUFS 120DIRECTIO opt_directio.h 121 122# POSIX kernel options 123P1003_1B opt_posix.h 124_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 125_KPOSIX_VERSION opt_posix.h 126 127# Do we want the config file compiled into the kernel? 128INCLUDE_CONFIG_FILE opt_config.h 129 130# Options for static file systems. These should only be used at config 131# time, since the corresponding lkms cannot work if there are any static 132# dependencies. Unusability is enforced by hiding the defines for the 133# options in a never-included header. 134EXT2FS opt_dontuse.h 135FDESC opt_dontuse.h 136HPFS opt_dontuse.h 137MFS opt_dontuse.h 138MSDOSFS opt_dontuse.h 139NULLFS opt_dontuse.h 140PORTAL opt_dontuse.h 141PROCFS opt_dontuse.h 142SMBFS opt_dontuse.h 143UDF opt_dontuse.h 144NTFS opt_dontuse.h 145#TMPFS opt_dontuse.h 146 147# These static filesystems has one slightly bogus static dependency in 148# sys/platform/.../i386/autoconf.c. If any of these filesystems are 149# statically compiled into the kernel, code for mounting them as root 150# filesystems will be enabled - but look below. Boot-code is purposely 151# unavailable for the LKM-based versions. 152CD9660 153FFS 154NFS 155NWFS 156USERFS 157TMPFS 158HAMMER 159 160# filesystems and libiconv bridge 161CD9660_ICONV opt_dontuse.h 162MSDOSFS_ICONV opt_dontuse.h 163NTFS_ICONV opt_dontuse.h 164 165# SMB/CIFS requester 166NETSMB opt_netsmb.h 167NETSMBCRYPTO opt_netsmb.h 168 169# If you are following the conditions in the copyright, 170# you can enable soft-updates which will speed up a lot of things 171# and make the system safer from crashes at the same time. 172# otherwise a STUB module will be compiled in. 173SOFTUPDATES opt_ffs.h 174 175# Enable fast hash lookups for large directories on UFS-based filesystems. 176UFS_DIRHASH opt_ufs.h 177 178# The above static dependencies are planned removed, with a 179# <filesystem>_ROOT option to control if it usable as root. This list 180# allows these options to be present in config files already (though 181# they won't make any difference yet). 182FFS_ROOT opt_ffs.h 183NFS_ROOT opt_nfsroot.h 184 185# The union static file system has bogus static dependencies, so it isn't 186# hidden yet. 187UNION 188 189# Options used only in subr_param.c. 190HZ opt_param.h 191MAXFILES opt_param.h 192NBUF opt_param.h 193NMBCLUSTERS opt_param.h 194NMBUFS opt_param.h 195VM_BCACHE_SIZE_MAX opt_param.h 196VM_SWZONE_SIZE_MAX opt_param.h 197MAXUSERS 198DFLDSIZ opt_param.h 199MAXDSIZ opt_param.h 200MAXSSIZ opt_param.h 201 202# Generic SCSI options. 203CAM_MAX_HIGHPOWER opt_cam.h 204CAMDEBUG opt_cam.h 205CAM_DEBUG_DELAY opt_cam.h 206CAM_DEBUG_BUS opt_cam.h 207CAM_DEBUG_TARGET opt_cam.h 208CAM_DEBUG_LUN opt_cam.h 209CAM_DEBUG_FLAGS opt_cam.h 210SCSI_DELAY opt_scsi.h 211SCSI_NO_SENSE_STRINGS opt_scsi.h 212SCSI_NO_OP_STRINGS opt_scsi.h 213 214# iSCSI options 215ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 216 217# Options used only in cam/scsi/scsi_cd.c 218CHANGER_MIN_BUSY_SECONDS opt_cd.h 219CHANGER_MAX_BUSY_SECONDS opt_cd.h 220 221# Options used only in cam/scsi/scsi_sa.c. 222SA_IO_TIMEOUT opt_sa.h 223SA_SPACE_TIMEOUT opt_sa.h 224SA_REWIND_TIMEOUT opt_sa.h 225SA_ERASE_TIMEOUT opt_sa.h 226SA_1FM_AT_EOD opt_sa.h 227 228# Options used only in cam/scsi/scsi_pt.c 229SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 230 231# Options used only in cam/scsi/scsi_ses.c 232SES_ENABLE_PASSTHROUGH opt_ses.h 233 234# Options used in dev/sym/ (Symbios SCSI driver). 235SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 236 # Allows the ncr to take precedence 237 # 1 (1<<0) -> 810a, 860 238 # 2 (1<<1) -> 825a, 875, 885, 895 239 # 4 (1<<2) -> 895a, 896, 1510d 240SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 241 # disabled:0 (default), enabled:1 242SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 243 # disabled:0, enabled:1 (default) 244SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 245 # default:8, range:[1..64] 246 247# Options used only in pci/ncr.c 248SCSI_NCR_DEBUG opt_ncr.h 249SCSI_NCR_MAX_SYNC opt_ncr.h 250SCSI_NCR_MAX_WIDE opt_ncr.h 251SCSI_NCR_MYADDR opt_ncr.h 252 253# Options used only in pci/isp_pci.c 254ISP_TARGET_MODE opt_isp.h 255 256# Options used in the 'nata' ATA/ATAPI driver 257ATA_STATIC_ID opt_ata.h 258 259# Net stuff. 260# altq stuff 261ALTQ opt_global.h 262ALTQ_CBQ opt_altq.h 263ALTQ_RED opt_altq.h 264ALTQ_RIO opt_altq.h 265ALTQ_HFSC opt_altq.h 266ALTQ_PRIQ opt_altq.h 267ALTQ_FAIRQ opt_altq.h 268ALTQ_NOPCC opt_altq.h 269ALTQ_DEBUG opt_altq.h 270 271ACCEPT_FILTER_DATA 272ACCEPT_FILTER_HTTP 273BOOTP opt_bootp.h 274BOOTP_COMPAT opt_bootp.h 275BOOTP_NFSROOT opt_bootp.h 276BOOTP_NFSV3 opt_bootp.h 277BOOTP_WIRED_TO opt_bootp.h 278CARP opt_carp.h 279ETHER_II opt_ef.h 280ETHER_8023 opt_ef.h 281ETHER_8022 opt_ef.h 282ETHER_SNAP opt_ef.h 283MROUTING opt_mrouting.h 284PIM opt_mrouting.h 285INET opt_inet.h 286INET6 opt_inet6.h 287IPSEC opt_ipsec.h 288IPSEC_ESP opt_ipsec.h 289IPSEC_DEBUG opt_ipsec.h 290IPSEC_FILTERGIF opt_ipsec.h 291FAST_IPSEC opt_ipsec.h 292IPDIVERT 293DUMMYNET opt_ipdn.h 294DUMMYNET_DEBUG opt_ipdn.h 295IPFIREWALL opt_ipfw.h 296IPFIREWALL_DEBUG opt_ipfw.h 297IPFIREWALL_VERBOSE opt_ipfw.h 298IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 299IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 300IPFIREWALL_FORWARD opt_ipfw.h 301IPV6FIREWALL opt_ip6fw.h 302IPV6FIREWALL_VERBOSE opt_ip6fw.h 303IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 304IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 305IPSTEALTH 306IPX opt_ipx.h 307IPXIP opt_ipx.h 308IPTUNNEL opt_ipx.h 309LIBMCHAIN 310MPLS opt_mpls.h 311NCP opt_ncp.h 312PPP_BSDCOMP opt_ppp.h 313PPP_DEFLATE opt_ppp.h 314PPP_FILTER opt_ppp.h 315SLIP_IFF_OPTS opt_slip.h 316TCPDEBUG 317TCP_SIGNATURE opt_inet.h 318TCP_DROP_SYNFIN opt_tcp_input.h 319 320XBONEHACK 321MBUF_STRESS_TEST opt_mbuf_stress_test.h 322 323# (New netgraph, port still in progress) 324# 325# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 326# Each netgraph node type can be either be compiled into the kernel 327# or loaded dynamically. To get the former, include the corresponding 328# option below. Each type has its own man page, e.g. ng_async(4). 329NETGRAPH7 330NETGRAPH7_DEBUG opt_netgraph.h 331NETGRAPH7_ASYNC opt_netgraph.h 332NETGRAPH7_ATMLLC opt_netgraph.h 333NETGRAPH7_ATM_ATMPIF opt_netgraph.h 334NETGRAPH7_BLUETOOTH opt_netgraph.h 335NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 336NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 337NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 338NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 339NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 340NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 341NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 342NETGRAPH7_BPF opt_netgraph.h 343NETGRAPH7_BRIDGE opt_netgraph.h 344NETGRAPH7_CAR opt_netgraph.h 345NETGRAPH7_CISCO opt_netgraph.h 346NETGRAPH7_DEFLATE opt_netgraph.h 347NETGRAPH7_DEVICE opt_netgraph.h 348NETGRAPH7_ECHO opt_netgraph.h 349NETGRAPH7_EIFACE opt_netgraph.h 350NETGRAPH7_ETF opt_netgraph.h 351NETGRAPH7_ETHER opt_netgraph.h 352NETGRAPH7_FEC opt_netgraph.h 353NETGRAPH7_FRAME_RELAY opt_netgraph.h 354NETGRAPH7_GIF opt_netgraph.h 355NETGRAPH7_GIF_DEMUX opt_netgraph.h 356NETGRAPH7_HOLE opt_netgraph.h 357NETGRAPH7_HUB opt_netgraph.h 358NETGRAPH7_IFACE opt_netgraph.h 359NETGRAPH7_IP_INPUT opt_netgraph.h 360NETGRAPH7_IPFW opt_netgraph.h 361NETGRAPH7_KSOCKET opt_netgraph.h 362NETGRAPH7_L2TP opt_netgraph.h 363NETGRAPH7_LMI opt_netgraph.h 364# MPPC compression requires proprietary files (not included) 365NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 366NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 367NETGRAPH7_NAT opt_netgraph.h 368NETGRAPH7_NETFLOW opt_netgraph.h 369NETGRAPH7_ONE2MANY opt_netgraph.h 370NETGRAPH7_PPP opt_netgraph.h 371NETGRAPH7_PPPOE opt_netgraph.h 372NETGRAPH7_PPTPGRE opt_netgraph.h 373NETGRAPH7_PRED1 opt_netgraph.h 374NETGRAPH7_RFC1490 opt_netgraph.h 375NETGRAPH7_SOCKET opt_netgraph.h 376NETGRAPH7_SPLIT opt_netgraph.h 377NETGRAPH7_SPPP opt_netgraph.h 378NETGRAPH7_TAG opt_netgraph.h 379NETGRAPH7_TCPMSS opt_netgraph.h 380NETGRAPH7_TEE opt_netgraph.h 381NETGRAPH7_TTY opt_netgraph.h 382NETGRAPH7_UI opt_netgraph.h 383NETGRAPH7_VJC opt_netgraph.h 384 385# NgATM options 386NGATM7_ATM opt_netgraph.h 387NGATM7_ATMBASE opt_netgraph.h 388NGATM7_SSCOP opt_netgraph.h 389NGATM7_SSCFU opt_netgraph.h 390NGATM7_UNI opt_netgraph.h 391NGATM7_CCATM opt_netgraph.h 392 393# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 394# Each netgraph node type can be either be compiled into the kernel 395# or loaded dynamically. To get the former, include the corresponding 396# option below. Each type has its own man page, e.g. ng_async(8). 397NETGRAPH 398NETGRAPH_ASYNC opt_netgraph.h 399NETGRAPH_BPF opt_netgraph.h 400NETGRAPH_BRIDGE opt_netgraph.h 401NETGRAPH_CISCO opt_netgraph.h 402NETGRAPH_ECHO opt_netgraph.h 403NETGRAPH_EIFACE opt_netgraph.h 404NETGRAPH_ETHER opt_netgraph.h 405NETGRAPH_FRAME_RELAY opt_netgraph.h 406NETGRAPH_HOLE opt_netgraph.h 407NETGRAPH_IFACE opt_netgraph.h 408NETGRAPH_KSOCKET opt_netgraph.h 409NETGRAPH_LMI opt_netgraph.h 410NETGRAPH_L2TP opt_netgraph.h 411# MPPC compression requires proprietary files (not included) 412NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 413NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 414NETGRAPH_ONE2MANY opt_netgraph.h 415NETGRAPH_PPP opt_netgraph.h 416NETGRAPH_PPPOE opt_netgraph.h 417NETGRAPH_PPTPGRE opt_netgraph.h 418NETGRAPH_RFC1490 opt_netgraph.h 419NETGRAPH_SOCKET opt_netgraph.h 420NETGRAPH_TEE opt_netgraph.h 421NETGRAPH_TTY opt_netgraph.h 422NETGRAPH_UI opt_netgraph.h 423NETGRAPH_VJC opt_netgraph.h 424 425# DRM options 426DRM_DEBUG opt_drm.h 427DRM_LINUX opt_drm.h 428 429# ATM (HARP version) 430ATM_CORE opt_atm.h 431ATM_IP opt_atm.h 432ATM_SIGPVC opt_atm.h 433ATM_SPANS opt_atm.h 434ATM_UNI opt_atm.h 435 436# XXX Conflict: # of devices vs network protocol (Native ATM). 437# This makes "atm.h" unusable. 438NATM opt_natm.h 439 440# DPT driver debug flags 441DPT_MEASURE_PERFORMANCE opt_dpt.h 442DPT_HANDLE_TIMEOUTS opt_dpt.h 443DPT_TIMEOUT_FACTOR opt_dpt.h 444DPT_LOST_IRQ opt_dpt.h 445DPT_RESET_HBA opt_dpt.h 446 447# Misc debug flags. Most of these should probably be replaced with 448# 'DEBUG', and then let people recompile just the interesting modules 449# with 'make CC="cc -DDEBUG"'. 450CLUSTERDEBUG opt_debug_cluster.h 451DEBUG_1284 opt_ppb_1284.h 452VP0_DEBUG opt_vpo.h 453LPT_DEBUG opt_lpt.h 454PLIP_DEBUG opt_plip.h 455LOCKF_DEBUG opt_debug_lockf.h 456NPX_DEBUG opt_debug_npx.h 457SI_DEBUG opt_debug_si.h 458 459# Fb options 460FB_DEBUG opt_fb.h 461FB_INSTALL_CDEV opt_fb.h 462 463# ppbus related options 464PERIPH_1284 opt_ppb_1284.h 465DONTPROBE_1284 opt_ppb_1284.h 466 467# smbus related options 468ENABLE_ALART opt_intpm.h 469 470# These cause changes all over the kernel 471BLKDEV_IOSIZE opt_global.h 472DEBUG opt_global.h 473DEBUG_LOCKS opt_global.h 474DEBUG_LOCKS_LATENCY opt_global.h 475DEBUG_CRIT_SECTIONS opt_global.h 476DIAGNOSTIC opt_global.h 477INVARIANTS opt_global.h 478VFS_BIO_DEBUG opt_global.h 479DEBUG_INTERRUPTS opt_global.h 480SOCKBUF_DEBUG opt_global.h 481PANIC_DEBUG opt_global.h 482MBUF_DEBUG opt_global.h 483PMAP_DEBUG opt_global.h 484VM_PAGE_DEBUG opt_global.h 485SLAB_DEBUG opt_global.h 486 487# Sample system/interrupt PC 488DEBUG_PCTRACK opt_pctrack.h 489 490# These are VM related options 491NO_SWAPPING opt_vm.h 492 493# Standard SMP options 494SMP opt_global.h 495 496# sys/netkey 497KEY 498 499# Size of the kernel message buffer 500MSGBUF_SIZE opt_msgbuf.h 501 502# PCI related options 503COMPAT_OLDPCI 504 505# NFS options 506NFS_MINATTRTIMO opt_nfs.h 507NFS_MAXATTRTIMO opt_nfs.h 508NFS_MINDIRATTRTIMO opt_nfs.h 509NFS_MAXDIRATTRTIMO opt_nfs.h 510NFS_GATHERDELAY opt_nfs.h 511NFS_UIDHASHSIZ opt_nfs.h 512NFS_WDELAYHASHSIZ opt_nfs.h 513NFS_MUIDHASHSIZ opt_nfs.h 514NFS_NOSERVER opt_nfs.h 515NFS_DEBUG opt_nfs.h 516 517# MSDOSFS options 518MSDOSFS_DEBUG opt_msdosfs.h 519 520# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 521BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 522BROOKTREE_ALLOC_PAGES opt_bktr.h 523BKTR_OVERRIDE_CARD opt_bktr.h 524BKTR_OVERRIDE_TUNER opt_bktr.h 525BKTR_OVERRIDE_DBX opt_bktr.h 526BKTR_OVERRIDE_MSP opt_bktr.h 527BKTR_SYSTEM_DEFAULT opt_bktr.h 528BKTR_ALLOC_PAGES opt_bktr.h 529BKTR_USE_PLL opt_bktr.h 530BKTR_GPIO_ACCESS opt_bktr.h 531BKTR_NO_MSP_RESET opt_bktr.h 532BKTR_430_FX_MODE opt_bktr.h 533BKTR_SIS_VIA_MODE opt_bktr.h 534BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 535 536# Various mi ISA bus flags 537COM_ESP opt_sio.h 538COM_MULTIPORT opt_sio.h 539BREAK_TO_DEBUGGER opt_comconsole.h 540ALT_BREAK_TO_DEBUGGER opt_comconsole.h 541 542# options for bus/device framework 543BUS_DEBUG opt_bus.h 544 545# options for USB support 546OHCI_DEBUG opt_usb.h 547USB_DEBUG opt_usb.h 548 549# Vinum options 550VINUMDEBUG opt_vinum.h 551 552# Embedded system options 553UKBD_DFLT_KEYMAP opt_ukbd.h 554INIT_PATH opt_init_path.h 555 556ROOTDEVNAME opt_rootdevname.h 557 558FDC_DEBUG opt_fdc.h 559PCFCLOCK_VERBOSE opt_pcfclock.h 560PCFCLOCK_MAX_RETRIES opt_pcfclock.h 561 562# Polling device handling 563DEVICE_POLLING opt_polling.h 564 565# Network device queue based polling 566IFPOLL_ENABLE opt_ifpoll.h 567 568# options for ubsec driver 569UBSEC_DEBUG opt_ubsec.h 570UBSEC_RNDTEST opt_ubsec.h 571UBSEC_NO_RNG opt_ubsec.h 572 573# options for hifn driver 574HIFN_DEBUG opt_hifn.h 575HIFN_RNDTEST opt_hifn.h 576HIFN_NO_RNG opt_hifn.h 577 578# options for safenet driver 579SAFE_DEBUG opt_safe.h 580SAFE_NO_RNG opt_safe.h 581SAFE_RNDTEST opt_safe.h 582 583# KTR options 584KTR opt_global.h 585KTR_ENTRIES opt_global.h 586KTR_ALL opt_ktr.h 587KTR_CTXSW opt_ktr.h 588KTR_DMCRYPT opt_ktr.h 589KTR_DSCHED_BFQ opt_ktr.h 590KTR_ETHERNET opt_ktr.h 591KTR_HAMMER opt_ktr.h 592KTR_IFQ opt_ktr.h 593KTR_IF_BGE opt_ktr.h 594KTR_IF_EM opt_ktr.h 595KTR_IF_EMX opt_ktr.h 596KTR_IF_START opt_ktr.h 597KTR_IPIQ opt_ktr.h 598KTR_KERNENTRY opt_ktr.h 599KTR_MEMORY opt_ktr.h 600KTR_MSGPORT opt_ktr.h 601KTR_POLLING opt_ktr.h 602KTR_SERIALIZER opt_ktr.h 603KTR_SPIN_CONTENTION opt_ktr.h 604KTR_TESTLOG opt_ktr.h 605KTR_TOKENS opt_ktr.h 606KTR_TSLEEP opt_ktr.h 607KTR_USB_MEMORY opt_ktr.h 608KTR_VERBOSE opt_ktr.h 609 610# options for the Atheros driver 611ATH_DEBUG opt_ath.h 612ATH_DIAGAPI opt_ath.h 613ATH_RXBUF opt_ath.h 614ATH_TXBUF opt_ath.h 615 616# ...and its HAL 617AH_SUPPORT_AR5416 opt_ah.h 618 619# bce driver 620BCE_DEBUG opt_bce.h 621 622# ed driver 623ED_NO_MIIBUS opt_ed.h 624 625# emx driver 626EMX_RSS_DEBUG opt_emx.h 627 628# jme driver 629JME_RSS_DEBUG opt_jme.h 630 631# dcons options 632DCONS_BUF_SIZE opt_dcons.h 633DCONS_POLL_HZ opt_dcons.h 634DCONS_FORCE_CONSOLE opt_dcons.h 635DCONS_FORCE_GDB opt_dcons.h 636 637# deprecated drivers and options 638I_WANT_DEPRECATED_STUFF opt_deprecated.h 639 640# SCTP 641SCTP opt_sctp.h 642SCTP_DEBUG opt_sctp.h 643SCTP_USE_ADLER32 opt_sctp.h 644SCTP_HIGH_SPEED opt_sctp.h 645SCTP_STAT_LOGGING opt_sctp.h 646SCTP_CWND_LOGGING opt_sctp.h 647SCTP_BLK_LOGGING opt_sctp.h 648SCTP_STR_LOGGING opt_sctp.h 649SCTP_FR_LOGGING opt_sctp.h 650SCTP_MAP_LOGGING opt_sctp.h 651 652# syslink kernel support 653# 654SYSLINK opt_syslink.h 655 656# DSCHED stuff 657DSCHED_FQ opt_dsched.h 658DSCHED_BFQ opt_dsched.h 659 660# Receive Side Scaling (now basecode) 661RSS_DEBUG opt_rss.h 662 663# Enable watchdogs 664WATCHDOG_ENABLE opt_cpu.h 665 666# Panic settings 667WDOG_DISABLE_ON_PANIC opt_panic.h 668ERROR_LED_ON_PANIC opt_panic.h 669 670# 802.11 support layer 671IEEE80211_DEBUG opt_wlan.h 672IEEE80211_DEBUG_REFCNT opt_wlan.h 673IEEE80211_AMPDU_AGE opt_wlan.h 674IEEE80211_SUPPORT_MESH opt_wlan.h 675IEEE80211_SUPPORT_SUPERG opt_wlan.h 676IEEE80211_SUPPORT_TDMA opt_wlan.h 677 678# 802.11 TDMA support 679TDMA_SLOTLEN_DEFAULT opt_tdma.h 680TDMA_SLOTCNT_DEFAULT opt_tdma.h 681TDMA_BINTVAL_DEFAULT opt_tdma.h 682TDMA_TXRATE_11B_DEFAULT opt_tdma.h 683TDMA_TXRATE_11G_DEFAULT opt_tdma.h 684TDMA_TXRATE_11A_DEFAULT opt_tdma.h 685TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 686TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 687TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 688TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 689TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 690 691PANIC_REBOOT_WAIT_TIME opt_panic.h 692