1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT64 to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68AMR_DEBUG opt_amr.h 69TWA_DEBUG opt_twa.h 70 71#options for ACPI support 72ACPI_DEBUG opt_acpi.h 73ACPI_NO_SEMAPHORES opt_acpi.h 74ACPI_ENABLE_PCI opt_acpi.h 75 76# Miscellaneous options. 77COMPAT_43 opt_compat.h 78COMPILING_LINT opt_lint.h 79DDB 80DDB_TRACE 81DDB_UNATTENDED opt_ddb.h 82GDB_REMOTE_CHAT opt_ddb.h 83KTRACE 84LIBICONV 85MD_NSECT opt_md.h 86MD_ROOT opt_md.h 87MD_ROOT_SIZE opt_md.h 88MFI_DEBUG opt_mfi.h 89NSWAPDEV opt_swap.h 90NSWBUF_MIN opt_swap.h 91PPS_SYNC opt_ntp.h 92QUOTA 93SUIDDIR opt_suiddir.h 94SHMMIN opt_sysvipc.h 95SHMMNI opt_sysvipc.h 96SHMSEG opt_sysvipc.h 97SEMMAP opt_sysvipc.h 98SEMMNI opt_sysvipc.h 99SEMMNS opt_sysvipc.h 100SEMMNU opt_sysvipc.h 101SEMMSL opt_sysvipc.h 102SEMOPM opt_sysvipc.h 103SEMUME opt_sysvipc.h 104MSGMNB opt_sysvipc.h 105MSGMNI opt_sysvipc.h 106MSGSEG opt_sysvipc.h 107MSGSSZ opt_sysvipc.h 108MSGTQL opt_sysvipc.h 109UCONSOLE 110ICMP_BANDLIM 111SHOW_BUSYBUFS 112DIRECTIO opt_directio.h 113 114# POSIX kernel options 115_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 116 117# Do we want the config file compiled into the kernel? 118INCLUDE_CONFIG_FILE opt_config.h 119 120# Options for static file systems. These should only be used at config 121# time, since the corresponding lkms cannot work if there are any static 122# dependencies. Unusability is enforced by hiding the defines for the 123# options in a never-included header. 124EXT2FS opt_dontuse.h 125HAMMER opt_dontuse.h 126HPFS opt_dontuse.h 127MFS opt_dontuse.h 128MSDOSFS opt_dontuse.h 129NTFS opt_dontuse.h 130NULLFS opt_dontuse.h 131PORTAL opt_dontuse.h 132PROCFS opt_dontuse.h 133PUFFS opt_dontuse.h 134SMBFS opt_dontuse.h 135TMPFS opt_dontuse.h 136UDF opt_dontuse.h 137 138# These static filesystems has one slightly bogus static dependency in 139# sys/platform/.../i386/autoconf.c. If any of these filesystems are 140# statically compiled into the kernel, code for mounting them as root 141# filesystems will be enabled - but look below. Boot-code is purposely 142# unavailable for the LKM-based versions. 143CD9660 144FFS 145NFS 146 147# filesystems and libiconv bridge 148CD9660_ICONV opt_dontuse.h 149MSDOSFS_ICONV opt_dontuse.h 150NTFS_ICONV opt_dontuse.h 151 152# SMB/CIFS requester 153NETSMB opt_netsmb.h 154NETSMBCRYPTO opt_netsmb.h 155 156# If you are following the conditions in the copyright, 157# you can enable soft-updates which will speed up a lot of things 158# and make the system safer from crashes at the same time. 159# otherwise a STUB module will be compiled in. 160SOFTUPDATES opt_ffs.h 161 162# Enable fast hash lookups for large directories on UFS-based filesystems. 163UFS_DIRHASH opt_ufs.h 164 165# The above static dependencies are planned removed, with a 166# <filesystem>_ROOT option to control if it usable as root. This list 167# allows these options to be present in config files already (though 168# they won't make any difference yet). 169FFS_ROOT opt_ffs.h 170NFS_ROOT opt_nfsroot.h 171 172# Options used only in subr_param.c. 173HZ opt_param.h 174MAXFILES opt_param.h 175NBUF opt_param.h 176NMBCLUSTERS opt_param.h 177NMBUFS opt_param.h 178VM_BCACHE_SIZE_MAX opt_param.h 179VM_SWZONE_SIZE_MAX opt_param.h 180MAXUSERS 181DFLDSIZ opt_param.h 182MAXDSIZ opt_param.h 183MAXSSIZ opt_param.h 184 185# Generic SCSI options. 186CAM_MAX_HIGHPOWER opt_cam.h 187CAMDEBUG opt_cam.h 188CAM_DEBUG_DELAY opt_cam.h 189CAM_DEBUG_BUS opt_cam.h 190CAM_DEBUG_TARGET opt_cam.h 191CAM_DEBUG_LUN opt_cam.h 192CAM_DEBUG_FLAGS opt_cam.h 193SCSI_DELAY opt_scsi.h 194SCSI_NO_SENSE_STRINGS opt_scsi.h 195SCSI_NO_OP_STRINGS opt_scsi.h 196 197# iSCSI options 198ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 199 200# Options used only in cam/scsi/scsi_cd.c 201CHANGER_MIN_BUSY_SECONDS opt_cd.h 202CHANGER_MAX_BUSY_SECONDS opt_cd.h 203 204# Options used only in cam/scsi/scsi_sa.c. 205SA_IO_TIMEOUT opt_sa.h 206SA_SPACE_TIMEOUT opt_sa.h 207SA_REWIND_TIMEOUT opt_sa.h 208SA_ERASE_TIMEOUT opt_sa.h 209SA_1FM_AT_EOD opt_sa.h 210 211# Options used only in cam/scsi/scsi_pt.c 212SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 213 214# Options used only in cam/scsi/scsi_ses.c 215SES_ENABLE_PASSTHROUGH opt_ses.h 216 217# Options used in dev/sym/ (Symbios SCSI driver). 218SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 219 # Allows the ncr to take precedence 220 # 1 (1<<0) -> 810a, 860 221 # 2 (1<<1) -> 825a, 875, 885, 895 222 # 4 (1<<2) -> 895a, 896, 1510d 223SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 224 # disabled:0 (default), enabled:1 225SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 226 # disabled:0, enabled:1 (default) 227SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 228 # default:8, range:[1..64] 229 230# Options used only in pci/ncr.c 231SCSI_NCR_DEBUG opt_ncr.h 232SCSI_NCR_MAX_SYNC opt_ncr.h 233SCSI_NCR_MAX_WIDE opt_ncr.h 234SCSI_NCR_MYADDR opt_ncr.h 235 236# Options used only in pci/isp_pci.c 237ISP_TARGET_MODE opt_isp.h 238 239# Options used in the 'nata' ATA/ATAPI driver 240ATA_STATIC_ID opt_ata.h 241 242# Net stuff. 243# altq stuff 244ALTQ opt_global.h 245ALTQ_CBQ opt_altq.h 246ALTQ_RED opt_altq.h 247ALTQ_RIO opt_altq.h 248ALTQ_HFSC opt_altq.h 249ALTQ_PRIQ opt_altq.h 250ALTQ_FAIRQ opt_altq.h 251ALTQ_NOPCC opt_altq.h 252ALTQ_DEBUG opt_altq.h 253 254ACCEPT_FILTER_DATA 255ACCEPT_FILTER_HTTP 256BOOTP opt_bootp.h 257BOOTP_COMPAT opt_bootp.h 258BOOTP_NFSROOT opt_bootp.h 259BOOTP_WIRED_TO opt_bootp.h 260CARP opt_carp.h 261MROUTING opt_mrouting.h 262PIM opt_mrouting.h 263INET opt_inet.h 264INET6 opt_inet6.h 265IPSEC opt_ipsec.h 266IPSEC_ESP opt_ipsec.h 267IPSEC_DEBUG opt_ipsec.h 268IPSEC_FILTERGIF opt_ipsec.h 269FAST_IPSEC opt_ipsec.h 270IPDIVERT 271DUMMYNET opt_ipdn.h 272DUMMYNET_DEBUG opt_ipdn.h 273IPFIREWALL opt_ipfw.h 274IPFIREWALL3 opt_ipfw.h 275IPFIREWALL_DEBUG opt_ipfw.h 276IPFIREWALL_VERBOSE opt_ipfw.h 277IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 278IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 279IPV6FIREWALL opt_ip6fw.h 280IPV6FIREWALL_VERBOSE opt_ip6fw.h 281IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 282IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 283IPSTEALTH 284LIBMCHAIN 285MPLS opt_mpls.h 286PPP_BSDCOMP opt_ppp.h 287PPP_DEFLATE opt_ppp.h 288PPP_FILTER opt_ppp.h 289TCPDEBUG 290TCP_SIGNATURE opt_inet.h 291TCP_DROP_SYNFIN opt_tcp_input.h 292ICMPPRINTFS 293 294XBONEHACK 295MBUF_STRESS_TEST opt_mbuf_stress_test.h 296 297# (New netgraph, port still in progress) 298# 299# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 300# Each netgraph node type can be either be compiled into the kernel 301# or loaded dynamically. To get the former, include the corresponding 302# option below. Each type has its own man page, e.g. ng_async(4). 303NETGRAPH7 304NETGRAPH7_DEBUG opt_netgraph.h 305NETGRAPH7_ASYNC opt_netgraph.h 306NETGRAPH7_ATMLLC opt_netgraph.h 307NETGRAPH7_ATM_ATMPIF opt_netgraph.h 308NETGRAPH7_BLUETOOTH opt_netgraph.h 309NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 310NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 311NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 312NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 313NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 314NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 315NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 316NETGRAPH7_BPF opt_netgraph.h 317NETGRAPH7_BRIDGE opt_netgraph.h 318NETGRAPH7_CAR opt_netgraph.h 319NETGRAPH7_CISCO opt_netgraph.h 320NETGRAPH7_DEFLATE opt_netgraph.h 321NETGRAPH7_DEVICE opt_netgraph.h 322NETGRAPH7_ECHO opt_netgraph.h 323NETGRAPH7_EIFACE opt_netgraph.h 324NETGRAPH7_ETF opt_netgraph.h 325NETGRAPH7_ETHER opt_netgraph.h 326NETGRAPH7_FEC opt_netgraph.h 327NETGRAPH7_FRAME_RELAY opt_netgraph.h 328NETGRAPH7_GIF opt_netgraph.h 329NETGRAPH7_GIF_DEMUX opt_netgraph.h 330NETGRAPH7_HOLE opt_netgraph.h 331NETGRAPH7_HUB opt_netgraph.h 332NETGRAPH7_IFACE opt_netgraph.h 333NETGRAPH7_IP_INPUT opt_netgraph.h 334NETGRAPH7_IPFW opt_netgraph.h 335NETGRAPH7_KSOCKET opt_netgraph.h 336NETGRAPH7_L2TP opt_netgraph.h 337NETGRAPH7_LMI opt_netgraph.h 338# MPPC compression requires proprietary files (not included) 339NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 340NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 341NETGRAPH7_NAT opt_netgraph.h 342NETGRAPH7_NETFLOW opt_netgraph.h 343NETGRAPH7_ONE2MANY opt_netgraph.h 344NETGRAPH7_PPP opt_netgraph.h 345NETGRAPH7_PPPOE opt_netgraph.h 346NETGRAPH7_PPTPGRE opt_netgraph.h 347NETGRAPH7_PRED1 opt_netgraph.h 348NETGRAPH7_RFC1490 opt_netgraph.h 349NETGRAPH7_SOCKET opt_netgraph.h 350NETGRAPH7_SPLIT opt_netgraph.h 351NETGRAPH7_SPPP opt_netgraph.h 352NETGRAPH7_TAG opt_netgraph.h 353NETGRAPH7_TCPMSS opt_netgraph.h 354NETGRAPH7_TEE opt_netgraph.h 355NETGRAPH7_TTY opt_netgraph.h 356NETGRAPH7_UI opt_netgraph.h 357NETGRAPH7_VJC opt_netgraph.h 358 359# NgATM options 360NGATM7_ATM opt_netgraph.h 361NGATM7_ATMBASE opt_netgraph.h 362NGATM7_SSCOP opt_netgraph.h 363NGATM7_SSCFU opt_netgraph.h 364NGATM7_UNI opt_netgraph.h 365NGATM7_CCATM opt_netgraph.h 366 367# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 368# Each netgraph node type can be either be compiled into the kernel 369# or loaded dynamically. To get the former, include the corresponding 370# option below. Each type has its own man page, e.g. ng_async(8). 371NETGRAPH 372NETGRAPH_ASYNC opt_netgraph.h 373NETGRAPH_BPF opt_netgraph.h 374NETGRAPH_BRIDGE opt_netgraph.h 375NETGRAPH_CISCO opt_netgraph.h 376NETGRAPH_ECHO opt_netgraph.h 377NETGRAPH_EIFACE opt_netgraph.h 378NETGRAPH_ETHER opt_netgraph.h 379NETGRAPH_FEC opt_netgraph.h 380NETGRAPH_FRAME_RELAY opt_netgraph.h 381NETGRAPH_HOLE opt_netgraph.h 382NETGRAPH_IFACE opt_netgraph.h 383NETGRAPH_KSOCKET opt_netgraph.h 384NETGRAPH_LMI opt_netgraph.h 385NETGRAPH_L2TP opt_netgraph.h 386# MPPC compression requires proprietary files (not included) 387NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 388NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 389NETGRAPH_ONE2MANY opt_netgraph.h 390NETGRAPH_PPP opt_netgraph.h 391NETGRAPH_PPPOE opt_netgraph.h 392NETGRAPH_PPTPGRE opt_netgraph.h 393NETGRAPH_RFC1490 opt_netgraph.h 394NETGRAPH_SOCKET opt_netgraph.h 395NETGRAPH_TEE opt_netgraph.h 396NETGRAPH_TTY opt_netgraph.h 397NETGRAPH_UI opt_netgraph.h 398NETGRAPH_VJC opt_netgraph.h 399 400# AGP options 401AGP_DEBUG opt_agp.h 402 403# DRM options 404DRM_DEBUG opt_drm.h 405DRM_LINUX opt_drm.h 406 407# DPT driver debug flags 408DPT_MEASURE_PERFORMANCE opt_dpt.h 409DPT_HANDLE_TIMEOUTS opt_dpt.h 410DPT_TIMEOUT_FACTOR opt_dpt.h 411DPT_LOST_IRQ opt_dpt.h 412DPT_RESET_HBA opt_dpt.h 413 414# Misc debug flags. Most of these should probably be replaced with 415# 'DEBUG', and then let people recompile just the interesting modules 416# with 'make CC="cc -DDEBUG"'. 417CLUSTERDEBUG opt_debug_cluster.h 418DEBUG_1284 opt_ppb_1284.h 419VP0_DEBUG opt_vpo.h 420LPT_DEBUG opt_lpt.h 421PLIP_DEBUG opt_plip.h 422LOCKF_DEBUG opt_debug_lockf.h 423SI_DEBUG opt_debug_si.h 424 425# Fb options 426FB_DEBUG opt_fb.h 427FB_INSTALL_CDEV opt_fb.h 428 429# ppbus related options 430PERIPH_1284 opt_ppb_1284.h 431DONTPROBE_1284 opt_ppb_1284.h 432 433# smbus related options 434ENABLE_ALART opt_intpm.h 435 436# These cause changes all over the kernel 437NO_LWKT_SPLIT_USERPRI opt_global.h 438BLKDEV_IOSIZE opt_global.h 439DEBUG opt_global.h 440DEBUG_LOCKS opt_global.h 441DEBUG_LOCKS_LATENCY opt_global.h 442DEBUG_CRIT_SECTIONS opt_global.h 443DIAGNOSTIC opt_global.h 444INVARIANTS opt_global.h 445VFS_BIO_DEBUG opt_global.h 446SOCKBUF_DEBUG opt_global.h 447PANIC_DEBUG opt_global.h 448MBUF_DEBUG opt_global.h 449PMAP_DEBUG opt_global.h 450VM_PAGE_DEBUG opt_global.h 451SLAB_DEBUG opt_global.h 452 453# Sample system/interrupt PC 454DEBUG_PCTRACK opt_pctrack.h 455 456# These are VM related options 457NO_SWAPPING opt_vm.h 458 459# sys/netkey 460KEY 461 462# Size of the kernel message buffer 463MSGBUF_SIZE opt_msgbuf.h 464 465# NFS options 466NFS_MINATTRTIMO opt_nfs.h 467NFS_MAXATTRTIMO opt_nfs.h 468NFS_MINDIRATTRTIMO opt_nfs.h 469NFS_MAXDIRATTRTIMO opt_nfs.h 470NFS_GATHERDELAY opt_nfs.h 471NFS_UIDHASHSIZ opt_nfs.h 472NFS_WDELAYHASHSIZ opt_nfs.h 473NFS_MUIDHASHSIZ opt_nfs.h 474NFS_NOSERVER opt_nfs.h 475NFS_DEBUG opt_nfs.h 476 477# MSDOSFS options 478MSDOSFS_DEBUG opt_msdosfs.h 479 480# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 481BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 482BROOKTREE_ALLOC_PAGES opt_bktr.h 483BKTR_OVERRIDE_CARD opt_bktr.h 484BKTR_OVERRIDE_TUNER opt_bktr.h 485BKTR_OVERRIDE_DBX opt_bktr.h 486BKTR_OVERRIDE_MSP opt_bktr.h 487BKTR_SYSTEM_DEFAULT opt_bktr.h 488BKTR_ALLOC_PAGES opt_bktr.h 489BKTR_USE_PLL opt_bktr.h 490BKTR_GPIO_ACCESS opt_bktr.h 491BKTR_NO_MSP_RESET opt_bktr.h 492BKTR_430_FX_MODE opt_bktr.h 493BKTR_SIS_VIA_MODE opt_bktr.h 494BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 495 496# Various mi ISA bus flags 497COM_ESP opt_sio.h 498COM_MULTIPORT opt_sio.h 499BREAK_TO_DEBUGGER opt_comconsole.h 500ALT_BREAK_TO_DEBUGGER opt_comconsole.h 501 502# options for bus/device framework 503BUS_DEBUG opt_bus.h 504 505# options for USB support 506OHCI_DEBUG opt_usb.h 507USB_DEBUG opt_usb.h 508 509# Vinum options 510VINUMDEBUG opt_vinum.h 511 512# Embedded system options 513UKBD_DFLT_KEYMAP opt_ukbd.h 514INIT_PATH opt_init_path.h 515 516ROOTDEVNAME opt_rootdevname.h 517 518FDC_DEBUG opt_fdc.h 519PCFCLOCK_VERBOSE opt_pcfclock.h 520PCFCLOCK_MAX_RETRIES opt_pcfclock.h 521 522# Network device queue based polling 523IFPOLL_ENABLE opt_ifpoll.h 524 525# options for ubsec driver 526UBSEC_DEBUG opt_ubsec.h 527UBSEC_RNDTEST opt_ubsec.h 528UBSEC_NO_RNG opt_ubsec.h 529 530# options for hifn driver 531HIFN_DEBUG opt_hifn.h 532HIFN_RNDTEST opt_hifn.h 533HIFN_NO_RNG opt_hifn.h 534 535# options for safenet driver 536SAFE_DEBUG opt_safe.h 537SAFE_NO_RNG opt_safe.h 538SAFE_RNDTEST opt_safe.h 539 540# KTR options 541KTR opt_global.h 542KTR_ENTRIES opt_global.h 543KTR_ALL opt_ktr.h 544KTR_ACPI_EC opt_ktr.h 545KTR_CTXSW opt_ktr.h 546KTR_DMCRYPT opt_ktr.h 547KTR_ETHERNET opt_ktr.h 548KTR_HAMMER opt_ktr.h 549KTR_IFQ opt_ktr.h 550KTR_IF_BGE opt_ktr.h 551KTR_IF_EM opt_ktr.h 552KTR_IF_EMX opt_ktr.h 553KTR_IF_START opt_ktr.h 554KTR_IPIQ opt_ktr.h 555KTR_KERNENTRY opt_ktr.h 556KTR_MEMORY opt_ktr.h 557KTR_SERIALIZER opt_ktr.h 558KTR_SPIN_CONTENTION opt_ktr.h 559KTR_TESTLOG opt_ktr.h 560KTR_TOKENS opt_ktr.h 561KTR_TSLEEP opt_ktr.h 562KTR_USCHED_BSD4 opt_ktr.h 563KTR_USCHED_DFLY opt_ktr.h 564KTR_VERBOSE opt_ktr.h 565KTR_IF_POLL opt_ktr.h 566KTR_UDP opt_ktr.h 567KTR_SOWAKEUP opt_ktr.h 568 569# NTFS options 570NTFS_DEBUG opt_ntfs.h 571 572# options for the Atheros driver 573ATH_DEBUG opt_ath.h 574#ATH_DEBUG_ALQ opt_ath.h 575ATH_DIAGAPI opt_ath.h 576#ATH_EEPROM_FIRMWARE opt_ath.h 577#ATH_ENABLE_11N opt_ath.h 578ATH_ENABLE_DFS opt_ath.h 579#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 580ATH_KTR_INTR_DEBUG opt_ath.h 581#ATH_TX99_DIAG opt_ath.h 582 583# ...and its HAL 584AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 585AH_ASSERT opt_ah.h 586AH_DEBUG opt_ah.h 587#AH_DEBUG_ALQ opt_ah.h 588#AH_DEBUG_COUNTRY opt_ah.h 589AH_INTERRUPT_DEBUGGING opt_ah.h 590AH_MAXCHAN opt_ah.h 591AH_NEED_DESC_SWAP opt_ah.h 592AH_PRIVATE_DIAG opt_ah.h 593AH_REGOPS_FUNC opt_ah.h 594AH_RXCFG_SDMAMW_4BYTES opt_ah.h 595AH_SUPPORT_AR5416 opt_ah.h 596AH_SUPPORT_AR9130 opt_ah.h 597AH_SUPPORT_AR9330 opt_ah.h 598AH_SUPPORT_AR9340 opt_ah.h 599AH_USE_INIPDGAIN opt_ah.h 600#AH_WRITE_EEPROM opt_ah.h 601#AH_WRITE_REGDOMAIN opt_ah.h 602 603# bce driver 604BCE_RSS_DEBUG opt_bce.h 605BCE_TSS_DEBUG opt_bce.h 606 607# bnx driver 608BNX_RSS_DEBUG opt_bnx.h 609BNX_TSO_DEBUG opt_bnx.h 610BNX_TSS_DEBUG opt_bnx.h 611 612# bwn driver 613BWN_DEBUG opt_bwn.h 614BWN_RXRING_SLOTS opt_bwn.h 615BWN_TXRING_SLOTS opt_bwn.h 616 617# siba_bwn driver 618SIBA_DEBUG opt_siba.h 619 620# emx driver 621EMX_RSS_DEBUG opt_emx.h 622EMX_TSO_DEBUG opt_emx.h 623EMX_TSS_DEBUG opt_emx.h 624 625# jme driver 626JME_RSS_DEBUG opt_jme.h 627 628# igb driver 629IGB_RSS_DEBUG opt_igb.h 630IGB_TSS_DEBUG opt_igb.h 631IGB_MSIX_DEBUG opt_igb.h 632 633# ix driver 634IX_RSS_DEBUG opt_ix.h 635 636# Options for the Intel 802.11n wireless driver 637IWN_DEBUG opt_iwn.h 638 639# dcons options 640DCONS_BUF_SIZE opt_dcons.h 641DCONS_POLL_HZ opt_dcons.h 642DCONS_FORCE_CONSOLE opt_dcons.h 643DCONS_FORCE_GDB opt_dcons.h 644 645# deprecated drivers and options 646I_WANT_DEPRECATED_STUFF opt_deprecated.h 647 648# Receive Side Scaling (now basecode) 649RSS_DEBUG opt_rss.h 650 651# Panic settings 652WDOG_DISABLE_ON_PANIC opt_panic.h 653ERROR_LED_ON_PANIC opt_panic.h 654 655# 802.11 support layer 656IEEE80211_DEBUG opt_wlan.h 657IEEE80211_DEBUG_REFCNT opt_wlan.h 658IEEE80211_AMPDU_AGE opt_wlan.h 659IEEE80211_SUPPORT_MESH opt_wlan.h 660IEEE80211_SUPPORT_SUPERG opt_wlan.h 661IEEE80211_SUPPORT_TDMA opt_wlan.h 662 663# 802.11 TDMA support 664TDMA_SLOTLEN_DEFAULT opt_tdma.h 665TDMA_SLOTCNT_DEFAULT opt_tdma.h 666TDMA_BINTVAL_DEFAULT opt_tdma.h 667TDMA_TXRATE_11B_DEFAULT opt_tdma.h 668TDMA_TXRATE_11G_DEFAULT opt_tdma.h 669TDMA_TXRATE_11A_DEFAULT opt_tdma.h 670TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 671TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 672TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 673TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 674TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 675 676# Sound options 677SND_DEBUG opt_snd.h 678SND_DIAGNOSTIC opt_snd.h 679SND_FEEDER_MULTIFORMAT opt_snd.h 680SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 681SND_FEEDER_RATE_HP opt_snd.h 682SND_PCM_64 opt_snd.h 683SND_OLDSTEREO opt_snd.h 684 685PANIC_REBOOT_WAIT_TIME opt_panic.h 686 687# Obsolete options (will be removed in the future) 688# 689SYSVMSG opt_dontuse.h 690SYSVSEM opt_dontuse.h 691SYSVSHM opt_dontuse.h 692P1003_1B opt_dontuse.h 693_KPOSIX_VERSION opt_dontuse.h 694DSCHED_FQ opt_dontuse.h 695