1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# $DragonFly: src/sys/conf/options,v 1.74 2007/11/10 19:02:04 swildner Exp $ 3# 4# On the handling of kernel options 5# 6# All kernel options should be listed in LINT, with suitable 7# descriptions. Negative options (options that make some code not 8# compile) should be commented out; LINT should compile as much code 9# as possible. Try to structure option-using code so that a single 10# option only switch code on, or only switch code off, to make it 11# possible to have a full compile-test. If necessary, you can include 12# "opt_lint.h" and check for COMPILING_LINT to get maximum code 13# coverage. 14# 15# All new options shall also be listed in either "conf/options" or 16# "<platform>/conf/options.<platform>". Options that affect a single 17# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 18# options that affect multiple files should either go in 19# "opt_global.h" if this is a kernel-wide option (used just about 20# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 21# only some files. Note that the effect of listing only an option 22# without a header-file-name in conf/options (and cousins) is that the 23# last convention is followed. 24# 25# This handling scheme is not yet fully implemented. 26# 27# 28# Format of this file: 29# Option name filename 30# 31# If filename is missing, the default is 32# opt_<name-of-option-in-lower-case>.h 33 34# Adaptec Array Controller driver options 35AAC_DEBUG opt_aac.h # Debugging levels: 36 # 0 - quiet, only emit warnings 37 # 1 - noisy, emit major function 38 # points and things done 39 # 2 - noisier, emit trace items 40 # in loops, etc. 41 # 3 - even more noisy, more function 42 # points 43 # 4 - noisiest 44 45# Adaptec aic7xxx SCSI controller options 46AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 47 # mapped I/O 48 49AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 50 # targetmode operations. 51 52AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 53 # configuration prom. 54 55AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 56 57AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 58 # See sys/dev/aic7xxx/aic7xxx.h 59 60AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 61 # output. Adds ~15k to driver. 62 63# Adaptec aic79xx SCSI controller options 64AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 65 66AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 67 # See sys/dev/aic7xxx/aic79xx.h 68 69AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 70 # targetmode operations. 71 72AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 73 # output. Adds ~15k to driver. 74 75ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 76 # mapped I/O 77TWA_DEBUG opt_twa.h 78TWA_FLASH_FIRMWARE opt_twa.h 79 80#options for ACPI support 81ACPI_DEBUG opt_acpi.h 82ACPI_NO_SEMAPHORES opt_acpi.h 83ACPI_QUIRK_VMWARE opt_acpi.h 84 85# Miscellaneous options. 86COMPAT_DF12 opt_compatdf12.h 87COMPAT_43 opt_compat.h 88COMPAT_SUNOS opt_compat.h 89COMPILING_LINT opt_lint.h 90CY_PCI_FASTINTR 91DDB 92DDB_TRACE 93DDB_UNATTENDED opt_ddb.h 94GDB_REMOTE_CHAT opt_ddb.h 95HW_WDOG 96KTRACE 97LIBICONV 98MD_NSECT opt_md.h 99MD_ROOT opt_md.h 100MD_ROOT_SIZE opt_md.h 101NSWAPDEV opt_swap.h 102NSWBUF_MIN opt_swap.h 103PPS_SYNC opt_ntp.h 104QUOTA 105SUIDDIR opt_suiddir.h 106SYSVMSG opt_sysvipc.h 107SYSVSEM opt_sysvipc.h 108SYSVSHM opt_sysvipc.h 109SHMALL opt_sysvipc.h 110SHMMAX opt_sysvipc.h 111SHMMAXPGS opt_sysvipc.h 112SHMMIN opt_sysvipc.h 113SHMMNI opt_sysvipc.h 114SHMSEG opt_sysvipc.h 115SEMMAP opt_sysvipc.h 116SEMMNI opt_sysvipc.h 117SEMMNS opt_sysvipc.h 118SEMMNU opt_sysvipc.h 119SEMMSL opt_sysvipc.h 120SEMOPM opt_sysvipc.h 121SEMUME opt_sysvipc.h 122MSGMNB opt_sysvipc.h 123MSGMNI opt_sysvipc.h 124MSGSEG opt_sysvipc.h 125MSGSSZ opt_sysvipc.h 126MSGTQL opt_sysvipc.h 127UCONSOLE 128ICMP_BANDLIM 129VFS_AIO 130DIRECTIO opt_directio.h 131 132# POSIX kernel options 133P1003_1B opt_posix.h 134_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 135_KPOSIX_VERSION opt_posix.h 136 137# Do we want the config file compiled into the kernel? 138INCLUDE_CONFIG_FILE opt_config.h 139 140# Options for static file systems. These should only be used at config 141# time, since the corresponding lkms cannot work if there are any static 142# dependencies. Unusability is enforced by hiding the defines for the 143# options in a never-included header. 144EXT2FS opt_dontuse.h 145FDESC opt_dontuse.h 146MFS opt_dontuse.h 147MSDOSFS opt_dontuse.h 148NULLFS opt_dontuse.h 149PORTAL opt_dontuse.h 150PROCFS opt_dontuse.h 151UDF opt_dontuse.h 152NTFS opt_dontuse.h 153 154# These static filesystems has one slightly bogus static dependency in 155# sys/platform/.../i386/autoconf.c. If any of these filesystems are 156# statically compiled into the kernel, code for mounting them as root 157# filesystems will be enabled - but look below. Boot-code is purposely 158# unavailable for the LKM-based versions. 159CD9660 160FFS 161NFS 162NWFS 163USERFS 164HAMMER 165 166# If you are following the conditions in the copyright, 167# you can enable soft-updates which will speed up a lot of thigs 168# and make the system safer from crashes at the same time. 169# otherwise a STUB module will be compiled in. 170SOFTUPDATES opt_ffs.h 171 172# Enable fast hash lookups for large directories on UFS-based filesystems. 173UFS_DIRHASH opt_ufs.h 174 175# The above static dependencies are planned removed, with a 176# <filesystem>_ROOT option to control if it usable as root. This list 177# allows these options to be present in config files already (though 178# they won't make any difference yet). 179FFS_ROOT opt_ffs.h 180NFS_ROOT opt_nfsroot.h 181 182# The union static file system has bogus static dependencies, so it isn't 183# hidden yet. 184UNION 185 186# Options used only in subr_param.c. 187HZ opt_param.h 188MAXFILES opt_param.h 189NBUF opt_param.h 190NMBCLUSTERS opt_param.h 191NMBUFS opt_param.h 192NSFBUFS opt_param.h 193VM_BCACHE_SIZE_MAX opt_param.h 194VM_SWZONE_SIZE_MAX opt_param.h 195MAXUSERS 196DFLDSIZ opt_param.h 197MAXDSIZ opt_param.h 198MAXSSIZ opt_param.h 199 200# Generic SCSI options. 201CAM_MAX_HIGHPOWER opt_cam.h 202CAMDEBUG opt_cam.h 203CAM_DEBUG_DELAY opt_cam.h 204CAM_DEBUG_BUS opt_cam.h 205CAM_DEBUG_TARGET opt_cam.h 206CAM_DEBUG_LUN opt_cam.h 207CAM_DEBUG_FLAGS opt_cam.h 208SCSI_DELAY opt_scsi.h 209SCSI_NO_SENSE_STRINGS opt_scsi.h 210SCSI_NO_OP_STRINGS opt_scsi.h 211 212# Options used only in cam/scsi/scsi_cd.c 213CHANGER_MIN_BUSY_SECONDS opt_cd.h 214CHANGER_MAX_BUSY_SECONDS opt_cd.h 215 216# Options used only in cam/scsi/scsi_sa.c. 217SA_IO_TIMEOUT opt_sa.h 218SA_SPACE_TIMEOUT opt_sa.h 219SA_REWIND_TIMEOUT opt_sa.h 220SA_ERASE_TIMEOUT opt_sa.h 221SA_1FM_AT_EOD opt_sa.h 222 223# Options used only in cam/scsi/scsi_pt.c 224SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 225 226# Options used only in cam/scsi/scsi_ses.c 227SES_ENABLE_PASSTHROUGH opt_ses.h 228 229# Options used in dev/sym/ (Symbios SCSI driver). 230SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 231 # Allows the ncr to take precedence 232 # 1 (1<<0) -> 810a, 860 233 # 2 (1<<1) -> 825a, 875, 885, 895 234 # 4 (1<<2) -> 895a, 896, 1510d 235SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 236 # disabled:0 (default), enabled:1 237SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 238 # disabled:0, enabled:1 (default) 239SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 240 # default:8, range:[1..64] 241 242# Options used only in pci/ncr.c 243SCSI_NCR_DEBUG opt_ncr.h 244SCSI_NCR_MAX_SYNC opt_ncr.h 245SCSI_NCR_MAX_WIDE opt_ncr.h 246SCSI_NCR_MYADDR opt_ncr.h 247 248# Options used only in pci/isp_pci.c 249ISP_TARGET_MODE opt_isp.h 250 251# Options used in the 'ata' ATA/ATAPI driver 252ATA_STATIC_ID opt_ata.h 253 254# Net stuff. 255# altq stuff 256ALTQ opt_global.h 257ALTQ_CBQ opt_altq.h 258ALTQ_RED opt_altq.h 259ALTQ_RIO opt_altq.h 260ALTQ_HFSC opt_altq.h 261ALTQ_PRIQ opt_altq.h 262ALTQ_NOPCC opt_altq.h 263ALTQ_DEBUG opt_altq.h 264 265ACCEPT_FILTER_DATA 266ACCEPT_FILTER_HTTP 267BOOTP opt_bootp.h 268BOOTP_COMPAT opt_bootp.h 269BOOTP_NFSROOT opt_bootp.h 270BOOTP_NFSV3 opt_bootp.h 271BOOTP_WIRED_TO opt_bootp.h 272CARP opt_carp.h 273ETHER_II opt_ef.h 274ETHER_8023 opt_ef.h 275ETHER_8022 opt_ef.h 276ETHER_SNAP opt_ef.h 277MROUTING opt_mrouting.h 278PIM opt_mrouting.h 279INET opt_inet.h 280INET6 opt_inet6.h 281IPSEC opt_ipsec.h 282IPSEC_ESP opt_ipsec.h 283IPSEC_DEBUG opt_ipsec.h 284IPSEC_FILTERGIF opt_ipsec.h 285FAST_IPSEC opt_ipsec.h 286IPDIVERT 287DUMMYNET opt_ipdn.h 288IPFILTER opt_ipfilter.h 289IPFILTER_LOG opt_ipfilter.h 290IPFILTER_DEFAULT_BLOCK opt_ipfilter.h 291IPFIREWALL opt_ipfw.h 292IPFIREWALL_VERBOSE opt_ipfw.h 293IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 294IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 295IPFIREWALL_FORWARD opt_ipfw.h 296IPV6FIREWALL opt_ip6fw.h 297IPV6FIREWALL_VERBOSE opt_ip6fw.h 298IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 299IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 300IPSTEALTH 301IPX opt_ipx.h 302IPXIP opt_ipx.h 303IPTUNNEL opt_ipx.h 304LIBMCHAIN 305NCP opt_ncp.h 306NETATALK opt_atalk.h 307NS opt_ns.h 308PPP_BSDCOMP opt_ppp.h 309PPP_DEFLATE opt_ppp.h 310PPP_FILTER opt_ppp.h 311SLIP_IFF_OPTS opt_slip.h 312TCPDEBUG 313TCP_DROP_SYNFIN opt_tcp_input.h 314 315XBONEHACK 316MBUF_STRESS_TEST opt_mbuf_stress_test.h 317 318# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 319# Each netgraph node type can be either be compiled into the kernel 320# or loaded dynamically. To get the former, include the corresponding 321# option below. Each type has its own man page, e.g. ng_async(8). 322NETGRAPH 323NETGRAPH_ASYNC opt_netgraph.h 324NETGRAPH_BPF opt_netgraph.h 325NETGRAPH_BRIDGE opt_netgraph.h 326NETGRAPH_CISCO opt_netgraph.h 327NETGRAPH_ECHO opt_netgraph.h 328NETGRAPH_EIFACE opt_netgraph.h 329NETGRAPH_ETHER opt_netgraph.h 330NETGRAPH_FRAME_RELAY opt_netgraph.h 331NETGRAPH_HOLE opt_netgraph.h 332NETGRAPH_IFACE opt_netgraph.h 333NETGRAPH_KSOCKET opt_netgraph.h 334NETGRAPH_LMI opt_netgraph.h 335NETGRAPH_L2TP opt_netgraph.h 336# MPPC compression requires proprietary files (not included) 337NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 338NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 339NETGRAPH_ONE2MANY opt_netgraph.h 340NETGRAPH_PPP opt_netgraph.h 341NETGRAPH_PPPOE opt_netgraph.h 342NETGRAPH_PPTPGRE opt_netgraph.h 343NETGRAPH_RFC1490 opt_netgraph.h 344NETGRAPH_SOCKET opt_netgraph.h 345NETGRAPH_TEE opt_netgraph.h 346NETGRAPH_TTY opt_netgraph.h 347NETGRAPH_UI opt_netgraph.h 348NETGRAPH_VJC opt_netgraph.h 349 350# DRM options 351DRM_DEBUG opt_drm.h 352DRM_LINUX opt_drm.h 353 354# ATM (HARP version) 355ATM_CORE opt_atm.h 356ATM_IP opt_atm.h 357ATM_SIGPVC opt_atm.h 358ATM_SPANS opt_atm.h 359ATM_UNI opt_atm.h 360 361# XXX Conflict: # of devices vs network protocol (Native ATM). 362# This makes "atm.h" unusable. 363NATM opt_natm.h 364 365# DPT driver debug flags 366DPT_MEASURE_PERFORMANCE opt_dpt.h 367DPT_HANDLE_TIMEOUTS opt_dpt.h 368DPT_TIMEOUT_FACTOR opt_dpt.h 369DPT_LOST_IRQ opt_dpt.h 370DPT_RESET_HBA opt_dpt.h 371 372# Misc debug flags. Most of these should probably be replaced with 373# 'DEBUG', and then let people recompile just the interesting modules 374# with 'make CC="cc -DDEBUG"'. 375CLUSTERDEBUG opt_debug_cluster.h 376DEBUG_1284 opt_ppb_1284.h 377VP0_DEBUG opt_vpo.h 378LPT_DEBUG opt_lpt.h 379PLIP_DEBUG opt_plip.h 380LOCKF_DEBUG opt_debug_lockf.h 381LOUTB opt_debug_outb.h 382NPX_DEBUG opt_debug_npx.h 383NETATALKDEBUG opt_atalk.h 384SI_DEBUG opt_debug_si.h 385 386# Fb options 387FB_DEBUG opt_fb.h 388FB_INSTALL_CDEV opt_fb.h 389 390# ppbus related options 391PERIPH_1284 opt_ppb_1284.h 392DONTPROBE_1284 opt_ppb_1284.h 393 394# smbus related options 395ENABLE_ALART opt_intpm.h 396 397# These cause changes all over the kernel 398BLKDEV_IOSIZE opt_global.h 399DEBUG opt_global.h 400DEBUG_LOCKS opt_global.h 401DEBUG_CRIT_SECTIONS opt_global.h 402DIAGNOSTIC opt_global.h 403INVARIANTS opt_global.h 404SIMPLELOCK_DEBUG opt_global.h 405VFS_BIO_DEBUG opt_global.h 406DEBUG_INTERRUPTS opt_global.h 407SOCKBUF_DEBUG opt_global.h 408PANIC_DEBUG opt_global.h 409MBUF_DEBUG opt_global.h 410 411# Sample system/interrupt PC 412DEBUG_PCTRACK opt_pctrack.h 413 414# These are VM related options 415NO_SWAPPING opt_vm.h 416PQ_CACHESIZE opt_vmpage.h 417 418# Standard SMP options 419SMP opt_global.h 420 421# sys/netkey 422KEY 423 424# Size of the kernel message buffer 425MSGBUF_SIZE opt_msgbuf.h 426 427# PCI related options 428PCI_QUIET opt_pci.h 429PCI_ENABLE_IO_MODES opt_pci.h 430PCI_MAP_FIXUP opt_pci.h 431COMPAT_OLDPCI 432 433# NFS options 434NFS_MINATTRTIMO opt_nfs.h 435NFS_MAXATTRTIMO opt_nfs.h 436NFS_MINDIRATTRTIMO opt_nfs.h 437NFS_MAXDIRATTRTIMO opt_nfs.h 438NFS_GATHERDELAY opt_nfs.h 439NFS_UIDHASHSIZ opt_nfs.h 440NFS_WDELAYHASHSIZ opt_nfs.h 441NFS_MUIDHASHSIZ opt_nfs.h 442NFS_NOSERVER opt_nfs.h 443NFS_DEBUG opt_nfs.h 444 445# MSDOSFS options 446MSDOSFS_DEBUG opt_msdosfs.h 447 448# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 449BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 450BROOKTREE_ALLOC_PAGES opt_bktr.h 451BKTR_OVERRIDE_CARD opt_bktr.h 452BKTR_OVERRIDE_TUNER opt_bktr.h 453BKTR_OVERRIDE_DBX opt_bktr.h 454BKTR_OVERRIDE_MSP opt_bktr.h 455BKTR_SYSTEM_DEFAULT opt_bktr.h 456BKTR_ALLOC_PAGES opt_bktr.h 457BKTR_USE_PLL opt_bktr.h 458BKTR_GPIO_ACCESS opt_bktr.h 459BKTR_NO_MSP_RESET opt_bktr.h 460BKTR_430_FX_MODE opt_bktr.h 461BKTR_SIS_VIA_MODE opt_bktr.h 462BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 463 464# meteor opt_meteor.h 465METEOR_ALLOC_PAGES opt_meteor.h 466METEOR_TEST_VIDEO opt_meteor.h 467METEOR_SYSTEM_DEFAULT opt_meteor.h 468METEOR_DEALLOC_PAGES opt_meteor.h 469METEOR_DEALLOC_ABOVE opt_meteor.h 470 471# Various mi ISA bus flags 472COMPAT_OLDISA opt_compat_oldisa.h 473COM_ESP opt_sio.h 474COM_MULTIPORT opt_sio.h 475BREAK_TO_DEBUGGER opt_comconsole.h 476ALT_BREAK_TO_DEBUGGER opt_comconsole.h 477 478# options for bus/device framework 479BUS_DEBUG opt_bus.h 480DEVICE_SYSCTLS opt_bus.h 481 482# options for USB support 483OHCI_DEBUG opt_usb.h 484USB_DEBUG opt_usb.h 485 486# Vinum options 487VINUMDEBUG opt_vinum.h 488 489# Embedded system options 490UKBD_DFLT_KEYMAP opt_ukbd.h 491INIT_PATH opt_init_path.h 492 493ROOTDEVNAME opt_rootdevname.h 494 495FDC_DEBUG opt_fdc.h 496PCFCLOCK_VERBOSE opt_pcfclock.h 497PCFCLOCK_MAX_RETRIES opt_pcfclock.h 498 499# Polling device handling 500DEVICE_POLLING opt_polling.h 501 502# options for ubsec driver 503UBSEC_DEBUG opt_ubsec.h 504UBSEC_RNDTEST opt_ubsec.h 505UBSEC_NO_RNG opt_ubsec.h 506 507# options for hifn driver 508HIFN_DEBUG opt_hifn.h 509HIFN_RNDTEST opt_hifn.h 510HIFN_NO_RNG opt_hifn.h 511 512# KTR options 513KTR opt_global.h 514KTR_ALL opt_ktr.h 515KTR_TOKENS opt_ktr.h 516KTR_MEMORY opt_ktr.h 517KTR_USB_MEMORY opt_ktr.h 518KTR_IPIQ opt_ktr.h 519KTR_MSGPORT opt_ktr.h 520KTR_ENTRIES opt_global.h 521KTR_VERBOSE opt_ktr.h 522KTR_GIANT_CONTENTION opt_ktr.h 523KTR_SPIN_CONTENTION opt_ktr.h 524KTR_IF_BGE opt_ktr.h 525KTR_IF_EM opt_ktr.h 526 527# bce driver 528BCE_DEBUG opt_bce.h 529BCE_NVRAM_WRITE_SUPPORT opt_bce.h 530 531# ed driver 532ED_NO_MIIBUS opt_ed.h 533 534# wi driver 535WI_SYMBOL_FIRMWARE opt_wi.h 536 537# dcons options 538DCONS_BUF_SIZE opt_dcons.h 539DCONS_POLL_HZ opt_dcons.h 540DCONS_FORCE_CONSOLE opt_dcons.h 541DCONS_FORCE_GDB opt_dcons.h 542 543# deprecated drivers and options 544I_WANT_DEPRECATED_STUFF opt_deprecated.h 545 546# SCTP 547SCTP opt_sctp.h 548SCTP_DEBUG opt_sctp.h 549SCTP_USE_ADLER32 opt_sctp.h 550SCTP_HIGH_SPEED opt_sctp.h 551SCTP_STAT_LOGGING opt_sctp.h 552SCTP_CWND_LOGGING opt_sctp.h 553SCTP_BLK_LOGGING opt_sctp.h 554SCTP_STR_LOGGING opt_sctp.h 555SCTP_FR_LOGGING opt_sctp.h 556SCTP_MAP_LOGGING opt_sctp.h 557 558# syslink kernel support 559# 560SYSLINK opt_syslink.h 561