1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT64 to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68AMR_DEBUG opt_amr.h 69TWA_DEBUG opt_twa.h 70 71#options for ACPI support 72ACPI_DEBUG opt_acpi.h 73ACPI_NO_SEMAPHORES opt_acpi.h 74ACPI_ENABLE_PCI opt_acpi.h 75 76# Miscellaneous options. 77COMPAT_43 opt_compat.h 78COMPILING_LINT opt_lint.h 79DDB 80DDB_TRACE 81DDB_UNATTENDED opt_ddb.h 82GDB_REMOTE_CHAT opt_ddb.h 83KTRACE 84LIBICONV 85MD_NSECT opt_md.h 86MD_ROOT opt_md.h 87MD_ROOT_SIZE opt_md.h 88MFI_DEBUG opt_mfi.h 89NSWAPDEV opt_swap.h 90NSWBUF_MIN opt_swap.h 91PPS_SYNC opt_ntp.h 92QUOTA 93SUIDDIR opt_suiddir.h 94SHMMIN opt_sysvipc.h 95SHMMNI opt_sysvipc.h 96SHMSEG opt_sysvipc.h 97SEMMAP opt_sysvipc.h 98SEMMNI opt_sysvipc.h 99SEMMNS opt_sysvipc.h 100SEMMNU opt_sysvipc.h 101SEMMSL opt_sysvipc.h 102SEMOPM opt_sysvipc.h 103SEMUME opt_sysvipc.h 104MSGMNB opt_sysvipc.h 105MSGMNI opt_sysvipc.h 106MSGSEG opt_sysvipc.h 107MSGSSZ opt_sysvipc.h 108MSGTQL opt_sysvipc.h 109UCONSOLE 110ICMP_BANDLIM 111SHOW_BUSYBUFS 112DIRECTIO opt_directio.h 113 114# POSIX kernel options 115_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 116 117# Do we want the config file compiled into the kernel? 118INCLUDE_CONFIG_FILE opt_config.h 119 120# Options for static file systems. These should only be used at config 121# time, since the corresponding lkms cannot work if there are any static 122# dependencies. Unusability is enforced by hiding the defines for the 123# options in a never-included header. 124EXT2FS opt_dontuse.h 125HAMMER opt_dontuse.h 126HPFS opt_dontuse.h 127MFS opt_dontuse.h 128MSDOSFS opt_dontuse.h 129NTFS opt_dontuse.h 130NULLFS opt_dontuse.h 131PORTAL opt_dontuse.h 132PROCFS opt_dontuse.h 133PUFFS opt_dontuse.h 134SMBFS opt_dontuse.h 135TMPFS opt_dontuse.h 136UDF opt_dontuse.h 137 138# These static filesystems has one slightly bogus static dependency in 139# sys/platform/.../i386/autoconf.c. If any of these filesystems are 140# statically compiled into the kernel, code for mounting them as root 141# filesystems will be enabled - but look below. Boot-code is purposely 142# unavailable for the LKM-based versions. 143CD9660 144FFS 145NFS 146 147# filesystems and libiconv bridge 148CD9660_ICONV opt_dontuse.h 149MSDOSFS_ICONV opt_dontuse.h 150NTFS_ICONV opt_dontuse.h 151 152# SMB/CIFS requester 153NETSMB opt_netsmb.h 154NETSMBCRYPTO opt_netsmb.h 155 156# If you are following the conditions in the copyright, 157# you can enable soft-updates which will speed up a lot of things 158# and make the system safer from crashes at the same time. 159# otherwise a STUB module will be compiled in. 160SOFTUPDATES opt_ffs.h 161 162# Enable fast hash lookups for large directories on UFS-based filesystems. 163UFS_DIRHASH opt_ufs.h 164 165# The above static dependencies are planned removed, with a 166# <filesystem>_ROOT option to control if it usable as root. This list 167# allows these options to be present in config files already (though 168# they won't make any difference yet). 169FFS_ROOT opt_ffs.h 170NFS_ROOT opt_nfsroot.h 171 172# The union static file system has bogus static dependencies, so it isn't 173# hidden yet. 174UNION 175 176# Options used only in subr_param.c. 177HZ opt_param.h 178MAXFILES opt_param.h 179NBUF opt_param.h 180NMBCLUSTERS opt_param.h 181NMBUFS opt_param.h 182VM_BCACHE_SIZE_MAX opt_param.h 183VM_SWZONE_SIZE_MAX opt_param.h 184MAXUSERS 185DFLDSIZ opt_param.h 186MAXDSIZ opt_param.h 187MAXSSIZ opt_param.h 188 189# Generic SCSI options. 190CAM_MAX_HIGHPOWER opt_cam.h 191CAMDEBUG opt_cam.h 192CAM_DEBUG_DELAY opt_cam.h 193CAM_DEBUG_BUS opt_cam.h 194CAM_DEBUG_TARGET opt_cam.h 195CAM_DEBUG_LUN opt_cam.h 196CAM_DEBUG_FLAGS opt_cam.h 197SCSI_DELAY opt_scsi.h 198SCSI_NO_SENSE_STRINGS opt_scsi.h 199SCSI_NO_OP_STRINGS opt_scsi.h 200 201# iSCSI options 202ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 203 204# Options used only in cam/scsi/scsi_cd.c 205CHANGER_MIN_BUSY_SECONDS opt_cd.h 206CHANGER_MAX_BUSY_SECONDS opt_cd.h 207 208# Options used only in cam/scsi/scsi_sa.c. 209SA_IO_TIMEOUT opt_sa.h 210SA_SPACE_TIMEOUT opt_sa.h 211SA_REWIND_TIMEOUT opt_sa.h 212SA_ERASE_TIMEOUT opt_sa.h 213SA_1FM_AT_EOD opt_sa.h 214 215# Options used only in cam/scsi/scsi_pt.c 216SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 217 218# Options used only in cam/scsi/scsi_ses.c 219SES_ENABLE_PASSTHROUGH opt_ses.h 220 221# Options used in dev/sym/ (Symbios SCSI driver). 222SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 223 # Allows the ncr to take precedence 224 # 1 (1<<0) -> 810a, 860 225 # 2 (1<<1) -> 825a, 875, 885, 895 226 # 4 (1<<2) -> 895a, 896, 1510d 227SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 228 # disabled:0 (default), enabled:1 229SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 230 # disabled:0, enabled:1 (default) 231SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 232 # default:8, range:[1..64] 233 234# Options used only in pci/ncr.c 235SCSI_NCR_DEBUG opt_ncr.h 236SCSI_NCR_MAX_SYNC opt_ncr.h 237SCSI_NCR_MAX_WIDE opt_ncr.h 238SCSI_NCR_MYADDR opt_ncr.h 239 240# Options used only in pci/isp_pci.c 241ISP_TARGET_MODE opt_isp.h 242 243# Options used in the 'nata' ATA/ATAPI driver 244ATA_STATIC_ID opt_ata.h 245 246# Net stuff. 247# altq stuff 248ALTQ opt_global.h 249ALTQ_CBQ opt_altq.h 250ALTQ_RED opt_altq.h 251ALTQ_RIO opt_altq.h 252ALTQ_HFSC opt_altq.h 253ALTQ_PRIQ opt_altq.h 254ALTQ_FAIRQ opt_altq.h 255ALTQ_NOPCC opt_altq.h 256ALTQ_DEBUG opt_altq.h 257 258ACCEPT_FILTER_DATA 259ACCEPT_FILTER_HTTP 260BOOTP opt_bootp.h 261BOOTP_COMPAT opt_bootp.h 262BOOTP_NFSROOT opt_bootp.h 263BOOTP_WIRED_TO opt_bootp.h 264CARP opt_carp.h 265MROUTING opt_mrouting.h 266PIM opt_mrouting.h 267INET opt_inet.h 268INET6 opt_inet6.h 269IPSEC opt_ipsec.h 270IPSEC_ESP opt_ipsec.h 271IPSEC_DEBUG opt_ipsec.h 272IPSEC_FILTERGIF opt_ipsec.h 273FAST_IPSEC opt_ipsec.h 274IPDIVERT 275DUMMYNET opt_ipdn.h 276DUMMYNET_DEBUG opt_ipdn.h 277IPFIREWALL opt_ipfw.h 278IPFIREWALL3 opt_ipfw.h 279IPFIREWALL_DEBUG opt_ipfw.h 280IPFIREWALL_VERBOSE opt_ipfw.h 281IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 282IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 283IPV6FIREWALL opt_ip6fw.h 284IPV6FIREWALL_VERBOSE opt_ip6fw.h 285IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 286IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 287IPSTEALTH 288LIBMCHAIN 289MPLS opt_mpls.h 290PPP_BSDCOMP opt_ppp.h 291PPP_DEFLATE opt_ppp.h 292PPP_FILTER opt_ppp.h 293TCPDEBUG 294TCP_SIGNATURE opt_inet.h 295TCP_DROP_SYNFIN opt_tcp_input.h 296ICMPPRINTFS 297 298XBONEHACK 299MBUF_STRESS_TEST opt_mbuf_stress_test.h 300 301# (New netgraph, port still in progress) 302# 303# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 304# Each netgraph node type can be either be compiled into the kernel 305# or loaded dynamically. To get the former, include the corresponding 306# option below. Each type has its own man page, e.g. ng_async(4). 307NETGRAPH7 308NETGRAPH7_DEBUG opt_netgraph.h 309NETGRAPH7_ASYNC opt_netgraph.h 310NETGRAPH7_ATMLLC opt_netgraph.h 311NETGRAPH7_ATM_ATMPIF opt_netgraph.h 312NETGRAPH7_BLUETOOTH opt_netgraph.h 313NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 314NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 315NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 316NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 317NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 318NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 319NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 320NETGRAPH7_BPF opt_netgraph.h 321NETGRAPH7_BRIDGE opt_netgraph.h 322NETGRAPH7_CAR opt_netgraph.h 323NETGRAPH7_CISCO opt_netgraph.h 324NETGRAPH7_DEFLATE opt_netgraph.h 325NETGRAPH7_DEVICE opt_netgraph.h 326NETGRAPH7_ECHO opt_netgraph.h 327NETGRAPH7_EIFACE opt_netgraph.h 328NETGRAPH7_ETF opt_netgraph.h 329NETGRAPH7_ETHER opt_netgraph.h 330NETGRAPH7_FEC opt_netgraph.h 331NETGRAPH7_FRAME_RELAY opt_netgraph.h 332NETGRAPH7_GIF opt_netgraph.h 333NETGRAPH7_GIF_DEMUX opt_netgraph.h 334NETGRAPH7_HOLE opt_netgraph.h 335NETGRAPH7_HUB opt_netgraph.h 336NETGRAPH7_IFACE opt_netgraph.h 337NETGRAPH7_IP_INPUT opt_netgraph.h 338NETGRAPH7_IPFW opt_netgraph.h 339NETGRAPH7_KSOCKET opt_netgraph.h 340NETGRAPH7_L2TP opt_netgraph.h 341NETGRAPH7_LMI opt_netgraph.h 342# MPPC compression requires proprietary files (not included) 343NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 344NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 345NETGRAPH7_NAT opt_netgraph.h 346NETGRAPH7_NETFLOW opt_netgraph.h 347NETGRAPH7_ONE2MANY opt_netgraph.h 348NETGRAPH7_PPP opt_netgraph.h 349NETGRAPH7_PPPOE opt_netgraph.h 350NETGRAPH7_PPTPGRE opt_netgraph.h 351NETGRAPH7_PRED1 opt_netgraph.h 352NETGRAPH7_RFC1490 opt_netgraph.h 353NETGRAPH7_SOCKET opt_netgraph.h 354NETGRAPH7_SPLIT opt_netgraph.h 355NETGRAPH7_SPPP opt_netgraph.h 356NETGRAPH7_TAG opt_netgraph.h 357NETGRAPH7_TCPMSS opt_netgraph.h 358NETGRAPH7_TEE opt_netgraph.h 359NETGRAPH7_TTY opt_netgraph.h 360NETGRAPH7_UI opt_netgraph.h 361NETGRAPH7_VJC opt_netgraph.h 362 363# NgATM options 364NGATM7_ATM opt_netgraph.h 365NGATM7_ATMBASE opt_netgraph.h 366NGATM7_SSCOP opt_netgraph.h 367NGATM7_SSCFU opt_netgraph.h 368NGATM7_UNI opt_netgraph.h 369NGATM7_CCATM opt_netgraph.h 370 371# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 372# Each netgraph node type can be either be compiled into the kernel 373# or loaded dynamically. To get the former, include the corresponding 374# option below. Each type has its own man page, e.g. ng_async(8). 375NETGRAPH 376NETGRAPH_ASYNC opt_netgraph.h 377NETGRAPH_BPF opt_netgraph.h 378NETGRAPH_BRIDGE opt_netgraph.h 379NETGRAPH_CISCO opt_netgraph.h 380NETGRAPH_ECHO opt_netgraph.h 381NETGRAPH_EIFACE opt_netgraph.h 382NETGRAPH_ETHER opt_netgraph.h 383NETGRAPH_FEC opt_netgraph.h 384NETGRAPH_FRAME_RELAY opt_netgraph.h 385NETGRAPH_HOLE opt_netgraph.h 386NETGRAPH_IFACE opt_netgraph.h 387NETGRAPH_KSOCKET opt_netgraph.h 388NETGRAPH_LMI opt_netgraph.h 389NETGRAPH_L2TP opt_netgraph.h 390# MPPC compression requires proprietary files (not included) 391NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 392NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 393NETGRAPH_ONE2MANY opt_netgraph.h 394NETGRAPH_PPP opt_netgraph.h 395NETGRAPH_PPPOE opt_netgraph.h 396NETGRAPH_PPTPGRE opt_netgraph.h 397NETGRAPH_RFC1490 opt_netgraph.h 398NETGRAPH_SOCKET opt_netgraph.h 399NETGRAPH_TEE opt_netgraph.h 400NETGRAPH_TTY opt_netgraph.h 401NETGRAPH_UI opt_netgraph.h 402NETGRAPH_VJC opt_netgraph.h 403 404# AGP options 405AGP_DEBUG opt_agp.h 406 407# DRM options 408DRM_DEBUG opt_drm.h 409DRM_LINUX opt_drm.h 410 411# DPT driver debug flags 412DPT_MEASURE_PERFORMANCE opt_dpt.h 413DPT_HANDLE_TIMEOUTS opt_dpt.h 414DPT_TIMEOUT_FACTOR opt_dpt.h 415DPT_LOST_IRQ opt_dpt.h 416DPT_RESET_HBA opt_dpt.h 417 418# Misc debug flags. Most of these should probably be replaced with 419# 'DEBUG', and then let people recompile just the interesting modules 420# with 'make CC="cc -DDEBUG"'. 421CLUSTERDEBUG opt_debug_cluster.h 422DEBUG_1284 opt_ppb_1284.h 423VP0_DEBUG opt_vpo.h 424LPT_DEBUG opt_lpt.h 425PLIP_DEBUG opt_plip.h 426LOCKF_DEBUG opt_debug_lockf.h 427SI_DEBUG opt_debug_si.h 428 429# Fb options 430FB_DEBUG opt_fb.h 431FB_INSTALL_CDEV opt_fb.h 432 433# ppbus related options 434PERIPH_1284 opt_ppb_1284.h 435DONTPROBE_1284 opt_ppb_1284.h 436 437# smbus related options 438ENABLE_ALART opt_intpm.h 439 440# These cause changes all over the kernel 441NO_LWKT_SPLIT_USERPRI opt_global.h 442BLKDEV_IOSIZE opt_global.h 443DEBUG opt_global.h 444DEBUG_LOCKS opt_global.h 445DEBUG_LOCKS_LATENCY opt_global.h 446DEBUG_CRIT_SECTIONS opt_global.h 447DIAGNOSTIC opt_global.h 448INVARIANTS opt_global.h 449VFS_BIO_DEBUG opt_global.h 450SOCKBUF_DEBUG opt_global.h 451PANIC_DEBUG opt_global.h 452MBUF_DEBUG opt_global.h 453PMAP_DEBUG opt_global.h 454VM_PAGE_DEBUG opt_global.h 455SLAB_DEBUG opt_global.h 456 457# Sample system/interrupt PC 458DEBUG_PCTRACK opt_pctrack.h 459 460# These are VM related options 461NO_SWAPPING opt_vm.h 462 463# sys/netkey 464KEY 465 466# Size of the kernel message buffer 467MSGBUF_SIZE opt_msgbuf.h 468 469# PCI related options 470COMPAT_OLDPCI 471 472# NFS options 473NFS_MINATTRTIMO opt_nfs.h 474NFS_MAXATTRTIMO opt_nfs.h 475NFS_MINDIRATTRTIMO opt_nfs.h 476NFS_MAXDIRATTRTIMO opt_nfs.h 477NFS_GATHERDELAY opt_nfs.h 478NFS_UIDHASHSIZ opt_nfs.h 479NFS_WDELAYHASHSIZ opt_nfs.h 480NFS_MUIDHASHSIZ opt_nfs.h 481NFS_NOSERVER opt_nfs.h 482NFS_DEBUG opt_nfs.h 483 484# MSDOSFS options 485MSDOSFS_DEBUG opt_msdosfs.h 486 487# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 488BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 489BROOKTREE_ALLOC_PAGES opt_bktr.h 490BKTR_OVERRIDE_CARD opt_bktr.h 491BKTR_OVERRIDE_TUNER opt_bktr.h 492BKTR_OVERRIDE_DBX opt_bktr.h 493BKTR_OVERRIDE_MSP opt_bktr.h 494BKTR_SYSTEM_DEFAULT opt_bktr.h 495BKTR_ALLOC_PAGES opt_bktr.h 496BKTR_USE_PLL opt_bktr.h 497BKTR_GPIO_ACCESS opt_bktr.h 498BKTR_NO_MSP_RESET opt_bktr.h 499BKTR_430_FX_MODE opt_bktr.h 500BKTR_SIS_VIA_MODE opt_bktr.h 501BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 502 503# Various mi ISA bus flags 504COM_ESP opt_sio.h 505COM_MULTIPORT opt_sio.h 506BREAK_TO_DEBUGGER opt_comconsole.h 507ALT_BREAK_TO_DEBUGGER opt_comconsole.h 508 509# options for bus/device framework 510BUS_DEBUG opt_bus.h 511 512# options for USB support 513OHCI_DEBUG opt_usb.h 514USB_DEBUG opt_usb.h 515 516# Vinum options 517VINUMDEBUG opt_vinum.h 518 519# Embedded system options 520UKBD_DFLT_KEYMAP opt_ukbd.h 521INIT_PATH opt_init_path.h 522 523ROOTDEVNAME opt_rootdevname.h 524 525FDC_DEBUG opt_fdc.h 526PCFCLOCK_VERBOSE opt_pcfclock.h 527PCFCLOCK_MAX_RETRIES opt_pcfclock.h 528 529# Network device queue based polling 530IFPOLL_ENABLE opt_ifpoll.h 531 532# options for ubsec driver 533UBSEC_DEBUG opt_ubsec.h 534UBSEC_RNDTEST opt_ubsec.h 535UBSEC_NO_RNG opt_ubsec.h 536 537# options for hifn driver 538HIFN_DEBUG opt_hifn.h 539HIFN_RNDTEST opt_hifn.h 540HIFN_NO_RNG opt_hifn.h 541 542# options for safenet driver 543SAFE_DEBUG opt_safe.h 544SAFE_NO_RNG opt_safe.h 545SAFE_RNDTEST opt_safe.h 546 547# KTR options 548KTR opt_global.h 549KTR_ENTRIES opt_global.h 550KTR_ALL opt_ktr.h 551KTR_ACPI_EC opt_ktr.h 552KTR_CTXSW opt_ktr.h 553KTR_DMCRYPT opt_ktr.h 554KTR_ETHERNET opt_ktr.h 555KTR_HAMMER opt_ktr.h 556KTR_IFQ opt_ktr.h 557KTR_IF_BGE opt_ktr.h 558KTR_IF_EM opt_ktr.h 559KTR_IF_EMX opt_ktr.h 560KTR_IF_START opt_ktr.h 561KTR_IPIQ opt_ktr.h 562KTR_KERNENTRY opt_ktr.h 563KTR_MEMORY opt_ktr.h 564KTR_SERIALIZER opt_ktr.h 565KTR_SPIN_CONTENTION opt_ktr.h 566KTR_TESTLOG opt_ktr.h 567KTR_TOKENS opt_ktr.h 568KTR_TSLEEP opt_ktr.h 569KTR_USCHED_BSD4 opt_ktr.h 570KTR_USCHED_DFLY opt_ktr.h 571KTR_VERBOSE opt_ktr.h 572KTR_IF_POLL opt_ktr.h 573KTR_UDP opt_ktr.h 574KTR_SOWAKEUP opt_ktr.h 575 576# NTFS options 577NTFS_DEBUG opt_ntfs.h 578 579# options for the Atheros driver 580ATH_DEBUG opt_ath.h 581#ATH_DEBUG_ALQ opt_ath.h 582ATH_DIAGAPI opt_ath.h 583#ATH_EEPROM_FIRMWARE opt_ath.h 584#ATH_ENABLE_11N opt_ath.h 585ATH_ENABLE_DFS opt_ath.h 586#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 587ATH_KTR_INTR_DEBUG opt_ath.h 588#ATH_TX99_DIAG opt_ath.h 589 590# ...and its HAL 591AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 592AH_ASSERT opt_ah.h 593AH_DEBUG opt_ah.h 594#AH_DEBUG_ALQ opt_ah.h 595#AH_DEBUG_COUNTRY opt_ah.h 596AH_INTERRUPT_DEBUGGING opt_ah.h 597AH_MAXCHAN opt_ah.h 598AH_NEED_DESC_SWAP opt_ah.h 599AH_PRIVATE_DIAG opt_ah.h 600AH_REGOPS_FUNC opt_ah.h 601AH_RXCFG_SDMAMW_4BYTES opt_ah.h 602AH_SUPPORT_AR5416 opt_ah.h 603AH_SUPPORT_AR9130 opt_ah.h 604AH_SUPPORT_AR9330 opt_ah.h 605AH_SUPPORT_AR9340 opt_ah.h 606AH_USE_INIPDGAIN opt_ah.h 607#AH_WRITE_EEPROM opt_ah.h 608#AH_WRITE_REGDOMAIN opt_ah.h 609 610# bce driver 611BCE_RSS_DEBUG opt_bce.h 612BCE_TSS_DEBUG opt_bce.h 613 614# bnx driver 615BNX_RSS_DEBUG opt_bnx.h 616BNX_TSO_DEBUG opt_bnx.h 617BNX_TSS_DEBUG opt_bnx.h 618 619# bwn driver 620BWN_DEBUG opt_bwn.h 621BWN_RXRING_SLOTS opt_bwn.h 622BWN_TXRING_SLOTS opt_bwn.h 623 624# siba_bwn driver 625SIBA_DEBUG opt_siba.h 626 627# emx driver 628EMX_RSS_DEBUG opt_emx.h 629EMX_TSO_DEBUG opt_emx.h 630EMX_TSS_DEBUG opt_emx.h 631 632# jme driver 633JME_RSS_DEBUG opt_jme.h 634 635# igb driver 636IGB_RSS_DEBUG opt_igb.h 637IGB_TSS_DEBUG opt_igb.h 638IGB_MSIX_DEBUG opt_igb.h 639 640# ix driver 641IX_RSS_DEBUG opt_ix.h 642 643# Options for the Intel 802.11n wireless driver 644IWN_DEBUG opt_iwn.h 645 646# dcons options 647DCONS_BUF_SIZE opt_dcons.h 648DCONS_POLL_HZ opt_dcons.h 649DCONS_FORCE_CONSOLE opt_dcons.h 650DCONS_FORCE_GDB opt_dcons.h 651 652# deprecated drivers and options 653I_WANT_DEPRECATED_STUFF opt_deprecated.h 654 655# Receive Side Scaling (now basecode) 656RSS_DEBUG opt_rss.h 657 658# Panic settings 659WDOG_DISABLE_ON_PANIC opt_panic.h 660ERROR_LED_ON_PANIC opt_panic.h 661 662# 802.11 support layer 663IEEE80211_DEBUG opt_wlan.h 664IEEE80211_DEBUG_REFCNT opt_wlan.h 665IEEE80211_AMPDU_AGE opt_wlan.h 666IEEE80211_SUPPORT_MESH opt_wlan.h 667IEEE80211_SUPPORT_SUPERG opt_wlan.h 668IEEE80211_SUPPORT_TDMA opt_wlan.h 669 670# 802.11 TDMA support 671TDMA_SLOTLEN_DEFAULT opt_tdma.h 672TDMA_SLOTCNT_DEFAULT opt_tdma.h 673TDMA_BINTVAL_DEFAULT opt_tdma.h 674TDMA_TXRATE_11B_DEFAULT opt_tdma.h 675TDMA_TXRATE_11G_DEFAULT opt_tdma.h 676TDMA_TXRATE_11A_DEFAULT opt_tdma.h 677TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 678TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 679TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 680TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 681TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 682 683# Sound options 684SND_DEBUG opt_snd.h 685SND_DIAGNOSTIC opt_snd.h 686SND_FEEDER_MULTIFORMAT opt_snd.h 687SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 688SND_FEEDER_RATE_HP opt_snd.h 689SND_PCM_64 opt_snd.h 690SND_OLDSTEREO opt_snd.h 691 692PANIC_REBOOT_WAIT_TIME opt_panic.h 693 694# Obsolete options (will be removed in the future) 695# 696SYSVMSG opt_dontuse.h 697SYSVSEM opt_dontuse.h 698SYSVSHM opt_dontuse.h 699P1003_1B opt_dontuse.h 700_KPOSIX_VERSION opt_dontuse.h 701DSCHED_FQ opt_dontuse.h 702