1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT64 to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68AMR_DEBUG opt_amr.h 69TWA_DEBUG opt_twa.h 70 71#options for ACPI support 72ACPI_DEBUG opt_acpi.h 73ACPI_NO_SEMAPHORES opt_acpi.h 74ACPI_ENABLE_PCI opt_acpi.h 75 76# Miscellaneous options. 77COMPAT_43 opt_compat.h 78COMPILING_LINT opt_lint.h 79DDB 80DDB_TRACE 81DDB_UNATTENDED opt_ddb.h 82GDB_REMOTE_CHAT opt_ddb.h 83KTRACE 84LIBICONV 85MD_NSECT opt_md.h 86MD_ROOT opt_md.h 87MD_ROOT_SIZE opt_md.h 88MFI_DEBUG opt_mfi.h 89NSWAPDEV opt_swap.h 90NSWBUF_MIN opt_swap.h 91PPS_SYNC opt_ntp.h 92QUOTA 93SUIDDIR opt_suiddir.h 94SHMMIN opt_sysvipc.h 95SHMMNI opt_sysvipc.h 96SHMSEG opt_sysvipc.h 97SEMMAP opt_sysvipc.h 98SEMMNI opt_sysvipc.h 99SEMMNS opt_sysvipc.h 100SEMMNU opt_sysvipc.h 101SEMMSL opt_sysvipc.h 102SEMOPM opt_sysvipc.h 103SEMUME opt_sysvipc.h 104MSGMNB opt_sysvipc.h 105MSGMNI opt_sysvipc.h 106MSGSEG opt_sysvipc.h 107MSGSSZ opt_sysvipc.h 108MSGTQL opt_sysvipc.h 109UCONSOLE 110ICMP_BANDLIM 111SHOW_BUSYBUFS 112DIRECTIO opt_directio.h 113 114# POSIX kernel options 115_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 116 117# Do we want the config file compiled into the kernel? 118INCLUDE_CONFIG_FILE opt_config.h 119 120# Options for static file systems. These should only be used at config 121# time, since the corresponding lkms cannot work if there are any static 122# dependencies. Unusability is enforced by hiding the defines for the 123# options in a never-included header. 124EXT2FS opt_dontuse.h 125HAMMER opt_dontuse.h 126HPFS opt_dontuse.h 127MFS opt_dontuse.h 128MSDOSFS opt_dontuse.h 129NTFS opt_dontuse.h 130NULLFS opt_dontuse.h 131PORTAL opt_dontuse.h 132PROCFS opt_dontuse.h 133PUFFS opt_dontuse.h 134SMBFS opt_dontuse.h 135TMPFS opt_dontuse.h 136UDF opt_dontuse.h 137AUTOFS opt_dontuse.h 138 139# These static filesystems has one slightly bogus static dependency in 140# sys/platform/.../i386/autoconf.c. If any of these filesystems are 141# statically compiled into the kernel, code for mounting them as root 142# filesystems will be enabled - but look below. Boot-code is purposely 143# unavailable for the LKM-based versions. 144CD9660 145FFS 146NFS 147 148# filesystems and libiconv bridge 149CD9660_ICONV opt_dontuse.h 150MSDOSFS_ICONV opt_dontuse.h 151NTFS_ICONV opt_dontuse.h 152 153# SMB/CIFS requester 154NETSMB opt_netsmb.h 155NETSMBCRYPTO opt_netsmb.h 156 157# If you are following the conditions in the copyright, 158# you can enable soft-updates which will speed up a lot of things 159# and make the system safer from crashes at the same time. 160# otherwise a STUB module will be compiled in. 161SOFTUPDATES opt_ffs.h 162 163# Enable fast hash lookups for large directories on UFS-based filesystems. 164UFS_DIRHASH opt_ufs.h 165 166# The above static dependencies are planned removed, with a 167# <filesystem>_ROOT option to control if it usable as root. This list 168# allows these options to be present in config files already (though 169# they won't make any difference yet). 170FFS_ROOT opt_ffs.h 171NFS_ROOT opt_nfsroot.h 172 173# Options used only in subr_param.c. 174HZ opt_param.h 175MAXFILES opt_param.h 176NBUF opt_param.h 177NMBCLUSTERS opt_param.h 178NMBUFS opt_param.h 179VM_BCACHE_SIZE_MAX opt_param.h 180VM_SWZONE_SIZE_MAX opt_param.h 181MAXUSERS 182DFLDSIZ opt_param.h 183MAXDSIZ opt_param.h 184MAXSSIZ opt_param.h 185 186# Generic SCSI options. 187CAM_MAX_HIGHPOWER opt_cam.h 188CAMDEBUG opt_cam.h 189CAM_DEBUG_DELAY opt_cam.h 190CAM_DEBUG_BUS opt_cam.h 191CAM_DEBUG_TARGET opt_cam.h 192CAM_DEBUG_LUN opt_cam.h 193CAM_DEBUG_FLAGS opt_cam.h 194SCSI_DELAY opt_scsi.h 195SCSI_NO_SENSE_STRINGS opt_scsi.h 196SCSI_NO_OP_STRINGS opt_scsi.h 197 198# iSCSI options 199ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 200 201# Options used only in cam/scsi/scsi_cd.c 202CHANGER_MIN_BUSY_SECONDS opt_cd.h 203CHANGER_MAX_BUSY_SECONDS opt_cd.h 204 205# Options used only in cam/scsi/scsi_sa.c. 206SA_IO_TIMEOUT opt_sa.h 207SA_SPACE_TIMEOUT opt_sa.h 208SA_REWIND_TIMEOUT opt_sa.h 209SA_ERASE_TIMEOUT opt_sa.h 210SA_1FM_AT_EOD opt_sa.h 211 212# Options used only in cam/scsi/scsi_pt.c 213SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 214 215# Options used only in cam/scsi/scsi_ses.c 216SES_ENABLE_PASSTHROUGH opt_ses.h 217 218# Options used in dev/sym/ (Symbios SCSI driver). 219SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 220 # Allows the ncr to take precedence 221 # 1 (1<<0) -> 810a, 860 222 # 2 (1<<1) -> 825a, 875, 885, 895 223 # 4 (1<<2) -> 895a, 896, 1510d 224SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 225 # disabled:0 (default), enabled:1 226SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 227 # disabled:0, enabled:1 (default) 228SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 229 # default:8, range:[1..64] 230 231# Options used only in pci/ncr.c 232SCSI_NCR_DEBUG opt_ncr.h 233SCSI_NCR_MAX_SYNC opt_ncr.h 234SCSI_NCR_MAX_WIDE opt_ncr.h 235SCSI_NCR_MYADDR opt_ncr.h 236 237# Options used only in pci/isp_pci.c 238ISP_TARGET_MODE opt_isp.h 239 240# Options used in the 'nata' ATA/ATAPI driver 241ATA_STATIC_ID opt_ata.h 242 243# Net stuff. 244# altq stuff 245ALTQ opt_global.h 246ALTQ_CBQ opt_altq.h 247ALTQ_RED opt_altq.h 248ALTQ_RIO opt_altq.h 249ALTQ_HFSC opt_altq.h 250ALTQ_PRIQ opt_altq.h 251ALTQ_FAIRQ opt_altq.h 252ALTQ_NOPCC opt_altq.h 253ALTQ_DEBUG opt_altq.h 254 255ACCEPT_FILTER_DATA 256ACCEPT_FILTER_HTTP 257BOOTP opt_bootp.h 258BOOTP_COMPAT opt_bootp.h 259BOOTP_NFSROOT opt_bootp.h 260BOOTP_WIRED_TO opt_bootp.h 261CARP opt_carp.h 262MROUTING opt_mrouting.h 263PIM opt_mrouting.h 264INET opt_inet.h 265INET6 opt_inet6.h 266IPSEC opt_ipsec.h 267IPSEC_ESP opt_ipsec.h 268IPSEC_DEBUG opt_ipsec.h 269IPSEC_FILTERGIF opt_ipsec.h 270FAST_IPSEC opt_ipsec.h 271IPDIVERT 272DUMMYNET opt_ipdn.h 273DUMMYNET_DEBUG opt_ipdn.h 274IPFIREWALL opt_ipfw.h 275IPFIREWALL3 opt_ipfw.h 276IPFIREWALL_DEBUG opt_ipfw.h 277IPFIREWALL_VERBOSE opt_ipfw.h 278IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 279IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 280IPV6FIREWALL opt_ip6fw.h 281IPV6FIREWALL_VERBOSE opt_ip6fw.h 282IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 283IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 284IPSTEALTH 285LIBMCHAIN 286MPLS opt_mpls.h 287PPP_BSDCOMP opt_ppp.h 288PPP_DEFLATE opt_ppp.h 289PPP_FILTER opt_ppp.h 290TCPDEBUG 291TCP_SIGNATURE opt_inet.h 292TCP_DROP_SYNFIN opt_tcp_input.h 293ICMPPRINTFS 294 295XBONEHACK 296MBUF_STRESS_TEST opt_mbuf_stress_test.h 297 298# (New netgraph, port still in progress) 299# 300# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 301# Each netgraph node type can be either be compiled into the kernel 302# or loaded dynamically. To get the former, include the corresponding 303# option below. Each type has its own man page, e.g. ng_async(4). 304NETGRAPH7 305NETGRAPH7_DEBUG opt_netgraph.h 306NETGRAPH7_ASYNC opt_netgraph.h 307NETGRAPH7_ATMLLC opt_netgraph.h 308NETGRAPH7_ATM_ATMPIF opt_netgraph.h 309NETGRAPH7_BLUETOOTH opt_netgraph.h 310NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 311NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 312NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 313NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 314NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 315NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 316NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 317NETGRAPH7_BPF opt_netgraph.h 318NETGRAPH7_BRIDGE opt_netgraph.h 319NETGRAPH7_CAR opt_netgraph.h 320NETGRAPH7_CISCO opt_netgraph.h 321NETGRAPH7_DEFLATE opt_netgraph.h 322NETGRAPH7_DEVICE opt_netgraph.h 323NETGRAPH7_ECHO opt_netgraph.h 324NETGRAPH7_EIFACE opt_netgraph.h 325NETGRAPH7_ETF opt_netgraph.h 326NETGRAPH7_ETHER opt_netgraph.h 327NETGRAPH7_FEC opt_netgraph.h 328NETGRAPH7_FRAME_RELAY opt_netgraph.h 329NETGRAPH7_GIF opt_netgraph.h 330NETGRAPH7_GIF_DEMUX opt_netgraph.h 331NETGRAPH7_HOLE opt_netgraph.h 332NETGRAPH7_HUB opt_netgraph.h 333NETGRAPH7_IFACE opt_netgraph.h 334NETGRAPH7_IP_INPUT opt_netgraph.h 335NETGRAPH7_IPFW opt_netgraph.h 336NETGRAPH7_KSOCKET opt_netgraph.h 337NETGRAPH7_L2TP opt_netgraph.h 338NETGRAPH7_LMI opt_netgraph.h 339# MPPC compression requires proprietary files (not included) 340NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 341NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 342NETGRAPH7_NAT opt_netgraph.h 343NETGRAPH7_NETFLOW opt_netgraph.h 344NETGRAPH7_ONE2MANY opt_netgraph.h 345NETGRAPH7_PPP opt_netgraph.h 346NETGRAPH7_PPPOE opt_netgraph.h 347NETGRAPH7_PPTPGRE opt_netgraph.h 348NETGRAPH7_PRED1 opt_netgraph.h 349NETGRAPH7_RFC1490 opt_netgraph.h 350NETGRAPH7_SOCKET opt_netgraph.h 351NETGRAPH7_SPLIT opt_netgraph.h 352NETGRAPH7_SPPP opt_netgraph.h 353NETGRAPH7_TAG opt_netgraph.h 354NETGRAPH7_TCPMSS opt_netgraph.h 355NETGRAPH7_TEE opt_netgraph.h 356NETGRAPH7_TTY opt_netgraph.h 357NETGRAPH7_UI opt_netgraph.h 358NETGRAPH7_VJC opt_netgraph.h 359 360# NgATM options 361NGATM7_ATM opt_netgraph.h 362NGATM7_ATMBASE opt_netgraph.h 363NGATM7_SSCOP opt_netgraph.h 364NGATM7_SSCFU opt_netgraph.h 365NGATM7_UNI opt_netgraph.h 366NGATM7_CCATM opt_netgraph.h 367 368# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 369# Each netgraph node type can be either be compiled into the kernel 370# or loaded dynamically. To get the former, include the corresponding 371# option below. Each type has its own man page, e.g. ng_async(8). 372NETGRAPH 373NETGRAPH_ASYNC opt_netgraph.h 374NETGRAPH_BPF opt_netgraph.h 375NETGRAPH_BRIDGE opt_netgraph.h 376NETGRAPH_CISCO opt_netgraph.h 377NETGRAPH_ECHO opt_netgraph.h 378NETGRAPH_EIFACE opt_netgraph.h 379NETGRAPH_ETHER opt_netgraph.h 380NETGRAPH_FEC opt_netgraph.h 381NETGRAPH_FRAME_RELAY opt_netgraph.h 382NETGRAPH_HOLE opt_netgraph.h 383NETGRAPH_IFACE opt_netgraph.h 384NETGRAPH_KSOCKET opt_netgraph.h 385NETGRAPH_LMI opt_netgraph.h 386NETGRAPH_L2TP opt_netgraph.h 387# MPPC compression requires proprietary files (not included) 388NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 389NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 390NETGRAPH_ONE2MANY opt_netgraph.h 391NETGRAPH_PPP opt_netgraph.h 392NETGRAPH_PPPOE opt_netgraph.h 393NETGRAPH_PPTPGRE opt_netgraph.h 394NETGRAPH_RFC1490 opt_netgraph.h 395NETGRAPH_SOCKET opt_netgraph.h 396NETGRAPH_TEE opt_netgraph.h 397NETGRAPH_TTY opt_netgraph.h 398NETGRAPH_UI opt_netgraph.h 399NETGRAPH_VJC opt_netgraph.h 400 401# AGP options 402AGP_DEBUG opt_agp.h 403 404# DRM options 405DRM_DEBUG opt_drm.h 406DRM_LINUX opt_drm.h 407 408# DPT driver debug flags 409DPT_MEASURE_PERFORMANCE opt_dpt.h 410DPT_HANDLE_TIMEOUTS opt_dpt.h 411DPT_TIMEOUT_FACTOR opt_dpt.h 412DPT_LOST_IRQ opt_dpt.h 413DPT_RESET_HBA opt_dpt.h 414 415# Misc debug flags. Most of these should probably be replaced with 416# 'DEBUG', and then let people recompile just the interesting modules 417# with 'make CC="cc -DDEBUG"'. 418CLUSTERDEBUG opt_debug_cluster.h 419DEBUG_1284 opt_ppb_1284.h 420VP0_DEBUG opt_vpo.h 421LPT_DEBUG opt_lpt.h 422PLIP_DEBUG opt_plip.h 423LOCKF_DEBUG opt_debug_lockf.h 424SI_DEBUG opt_debug_si.h 425 426# Fb options 427FB_DEBUG opt_fb.h 428FB_INSTALL_CDEV opt_fb.h 429 430# ppbus related options 431PERIPH_1284 opt_ppb_1284.h 432DONTPROBE_1284 opt_ppb_1284.h 433 434# smbus related options 435ENABLE_ALART opt_intpm.h 436 437# These cause changes all over the kernel 438NO_LWKT_SPLIT_USERPRI opt_global.h 439BLKDEV_IOSIZE opt_global.h 440DEBUG opt_global.h 441DEBUG_LOCKS opt_global.h 442DEBUG_LOCKS_LATENCY opt_global.h 443DEBUG_CRIT_SECTIONS opt_global.h 444DIAGNOSTIC opt_global.h 445INVARIANTS opt_global.h 446VFS_BIO_DEBUG opt_global.h 447SOCKBUF_DEBUG opt_global.h 448PANIC_DEBUG opt_global.h 449MBUF_DEBUG opt_global.h 450PMAP_DEBUG opt_global.h 451VM_PAGE_DEBUG opt_global.h 452SLAB_DEBUG opt_global.h 453 454# Sample system/interrupt PC 455DEBUG_PCTRACK opt_pctrack.h 456 457# These are VM related options 458NO_SWAPPING opt_vm.h 459 460# sys/netkey 461KEY 462 463# Size of the kernel message buffer 464MSGBUF_SIZE opt_msgbuf.h 465 466# NFS options 467NFS_MINATTRTIMO opt_nfs.h 468NFS_MAXATTRTIMO opt_nfs.h 469NFS_MINDIRATTRTIMO opt_nfs.h 470NFS_MAXDIRATTRTIMO opt_nfs.h 471NFS_GATHERDELAY opt_nfs.h 472NFS_UIDHASHSIZ opt_nfs.h 473NFS_WDELAYHASHSIZ opt_nfs.h 474NFS_MUIDHASHSIZ opt_nfs.h 475NFS_NOSERVER opt_nfs.h 476NFS_DEBUG opt_nfs.h 477 478# MSDOSFS options 479MSDOSFS_DEBUG opt_msdosfs.h 480 481# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 482BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 483BROOKTREE_ALLOC_PAGES opt_bktr.h 484BKTR_OVERRIDE_CARD opt_bktr.h 485BKTR_OVERRIDE_TUNER opt_bktr.h 486BKTR_OVERRIDE_DBX opt_bktr.h 487BKTR_OVERRIDE_MSP opt_bktr.h 488BKTR_SYSTEM_DEFAULT opt_bktr.h 489BKTR_ALLOC_PAGES opt_bktr.h 490BKTR_USE_PLL opt_bktr.h 491BKTR_GPIO_ACCESS opt_bktr.h 492BKTR_NO_MSP_RESET opt_bktr.h 493BKTR_430_FX_MODE opt_bktr.h 494BKTR_SIS_VIA_MODE opt_bktr.h 495BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 496 497# Various mi ISA bus flags 498COM_ESP opt_sio.h 499COM_MULTIPORT opt_sio.h 500BREAK_TO_DEBUGGER opt_comconsole.h 501ALT_BREAK_TO_DEBUGGER opt_comconsole.h 502 503# options for bus/device framework 504BUS_DEBUG opt_bus.h 505 506# options for USB support 507OHCI_DEBUG opt_usb.h 508USB_DEBUG opt_usb.h 509 510# options for the Realtek RTL8188*U/RTL8192CU driver (urtwn) 511URTWN_WITHOUT_UCODE opt_urtwn.h 512 513# Vinum options 514VINUMDEBUG opt_vinum.h 515 516# Embedded system options 517UKBD_DFLT_KEYMAP opt_ukbd.h 518INIT_PATH opt_init_path.h 519 520ROOTDEVNAME opt_rootdevname.h 521 522FDC_DEBUG opt_fdc.h 523PCFCLOCK_VERBOSE opt_pcfclock.h 524PCFCLOCK_MAX_RETRIES opt_pcfclock.h 525 526# Network device queue based polling 527IFPOLL_ENABLE opt_ifpoll.h 528 529# options for ubsec driver 530UBSEC_DEBUG opt_ubsec.h 531UBSEC_RNDTEST opt_ubsec.h 532UBSEC_NO_RNG opt_ubsec.h 533 534# options for hifn driver 535HIFN_DEBUG opt_hifn.h 536HIFN_RNDTEST opt_hifn.h 537HIFN_NO_RNG opt_hifn.h 538 539# options for safenet driver 540SAFE_DEBUG opt_safe.h 541SAFE_NO_RNG opt_safe.h 542SAFE_RNDTEST opt_safe.h 543 544# KTR options 545KTR opt_global.h 546KTR_ENTRIES opt_global.h 547KTR_ALL opt_ktr.h 548KTR_ACPI_EC opt_ktr.h 549KTR_CTXSW opt_ktr.h 550KTR_DMCRYPT opt_ktr.h 551KTR_ETHERNET opt_ktr.h 552KTR_HAMMER opt_ktr.h 553KTR_IFQ opt_ktr.h 554KTR_IF_BGE opt_ktr.h 555KTR_IF_EM opt_ktr.h 556KTR_IF_EMX opt_ktr.h 557KTR_IF_START opt_ktr.h 558KTR_IPIQ opt_ktr.h 559KTR_KERNENTRY opt_ktr.h 560KTR_MEMORY opt_ktr.h 561KTR_SERIALIZER opt_ktr.h 562KTR_SPIN_CONTENTION opt_ktr.h 563KTR_TESTLOG opt_ktr.h 564KTR_TOKENS opt_ktr.h 565KTR_TSLEEP opt_ktr.h 566KTR_USCHED_BSD4 opt_ktr.h 567KTR_USCHED_DFLY opt_ktr.h 568KTR_VERBOSE opt_ktr.h 569KTR_IF_POLL opt_ktr.h 570KTR_UDP opt_ktr.h 571KTR_SOWAKEUP opt_ktr.h 572 573# NTFS options 574NTFS_DEBUG opt_ntfs.h 575 576# options for the Atheros driver 577ATH_DEBUG opt_ath.h 578#ATH_DEBUG_ALQ opt_ath.h 579ATH_DIAGAPI opt_ath.h 580#ATH_EEPROM_FIRMWARE opt_ath.h 581#ATH_ENABLE_11N opt_ath.h 582ATH_ENABLE_DFS opt_ath.h 583#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 584ATH_KTR_INTR_DEBUG opt_ath.h 585#ATH_TX99_DIAG opt_ath.h 586 587# ...and its HAL 588AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 589AH_ASSERT opt_ah.h 590AH_DEBUG opt_ah.h 591#AH_DEBUG_ALQ opt_ah.h 592#AH_DEBUG_COUNTRY opt_ah.h 593AH_INTERRUPT_DEBUGGING opt_ah.h 594AH_MAXCHAN opt_ah.h 595AH_NEED_DESC_SWAP opt_ah.h 596AH_PRIVATE_DIAG opt_ah.h 597AH_RXCFG_SDMAMW_4BYTES opt_ah.h 598AH_SUPPORT_AR5416 opt_ah.h 599AH_SUPPORT_AR9130 opt_ah.h 600AH_SUPPORT_AR9330 opt_ah.h 601AH_SUPPORT_AR9340 opt_ah.h 602AH_USE_INIPDGAIN opt_ah.h 603#AH_WRITE_EEPROM opt_ah.h 604#AH_WRITE_REGDOMAIN opt_ah.h 605 606# bce driver 607BCE_RSS_DEBUG opt_bce.h 608BCE_TSS_DEBUG opt_bce.h 609 610# bnx driver 611BNX_RSS_DEBUG opt_bnx.h 612BNX_TSO_DEBUG opt_bnx.h 613BNX_TSS_DEBUG opt_bnx.h 614 615# bwn driver 616BWN_DEBUG opt_bwn.h 617BWN_RXRING_SLOTS opt_bwn.h 618BWN_TXRING_SLOTS opt_bwn.h 619 620# siba_bwn driver 621SIBA_DEBUG opt_siba.h 622 623# emx driver 624EMX_RSS_DEBUG opt_emx.h 625EMX_TSO_DEBUG opt_emx.h 626EMX_TSS_DEBUG opt_emx.h 627 628# jme driver 629JME_RSS_DEBUG opt_jme.h 630 631# igb driver 632IGB_RSS_DEBUG opt_igb.h 633IGB_TSS_DEBUG opt_igb.h 634IGB_MSIX_DEBUG opt_igb.h 635 636# ix driver 637IX_RSS_DEBUG opt_ix.h 638 639# Options for the Intel 802.11ac wireless driver 640IWM_DEBUG opt_iwm.h 641 642# Options for the Intel 802.11n wireless driver 643IWN_DEBUG opt_iwn.h 644 645# Options for the Intel 3945ABG wireless driver 646WPI_DEBUG opt_wpi.h 647 648# dcons options 649DCONS_BUF_SIZE opt_dcons.h 650DCONS_POLL_HZ opt_dcons.h 651DCONS_FORCE_CONSOLE opt_dcons.h 652DCONS_FORCE_GDB opt_dcons.h 653 654# deprecated drivers and options 655I_WANT_DEPRECATED_STUFF opt_deprecated.h 656 657# Receive Side Scaling (now basecode) 658RSS_DEBUG opt_rss.h 659 660# Panic settings 661WDOG_DISABLE_ON_PANIC opt_panic.h 662ERROR_LED_ON_PANIC opt_panic.h 663 664# 802.11 support layer 665IEEE80211_DEBUG opt_wlan.h 666IEEE80211_DEBUG_REFCNT opt_wlan.h 667IEEE80211_SUPPORT_MESH opt_wlan.h 668IEEE80211_SUPPORT_SUPERG opt_wlan.h 669IEEE80211_SUPPORT_TDMA opt_wlan.h 670 671# 802.11 TDMA support 672TDMA_SLOTLEN_DEFAULT opt_tdma.h 673TDMA_SLOTCNT_DEFAULT opt_tdma.h 674TDMA_BINTVAL_DEFAULT opt_tdma.h 675TDMA_TXRATE_11B_DEFAULT opt_tdma.h 676TDMA_TXRATE_11G_DEFAULT opt_tdma.h 677TDMA_TXRATE_11A_DEFAULT opt_tdma.h 678TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 679TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 680TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 681TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 682TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 683 684# Sound options 685SND_DEBUG opt_snd.h 686SND_DIAGNOSTIC opt_snd.h 687SND_FEEDER_MULTIFORMAT opt_snd.h 688SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 689SND_FEEDER_RATE_HP opt_snd.h 690SND_PCM_64 opt_snd.h 691SND_OLDSTEREO opt_snd.h 692 693PANIC_REBOOT_WAIT_TIME opt_panic.h 694 695# Obsolete options (will be removed in the future) 696# 697SYSVMSG opt_dontuse.h 698SYSVSEM opt_dontuse.h 699SYSVSHM opt_dontuse.h 700P1003_1B opt_dontuse.h 701_KPOSIX_VERSION opt_dontuse.h 702DSCHED_FQ opt_dontuse.h 703