1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 37 # mapped I/O 38AMR_DEBUG opt_amr.h 39TWA_DEBUG opt_twa.h 40 41#options for ACPI support 42ACPI_DEBUG opt_acpi.h 43ACPI_ENABLE_PCI opt_acpi.h 44 45# Miscellaneous options. 46COMPILING_LINT opt_lint.h 47DDB 48DDB_TRACE 49DDB_UNATTENDED opt_ddb.h 50GDB_REMOTE_CHAT opt_ddb.h 51KTRACE 52LIBICONV 53MD_NSECT opt_md.h 54MD_ROOT opt_md.h 55MD_ROOT_SIZE opt_md.h 56MFI_DEBUG opt_mfi.h 57NSWAPDEV opt_swap.h 58NSWBUF_MIN opt_swap.h 59PPS_SYNC opt_ntp.h 60QUOTA 61SUIDDIR opt_suiddir.h 62SHMMIN opt_sysvipc.h 63SHMMNI opt_sysvipc.h 64SHMSEG opt_sysvipc.h 65SEMMAP opt_sysvipc.h 66SEMMNI opt_sysvipc.h 67SEMMNS opt_sysvipc.h 68SEMMNU opt_sysvipc.h 69SEMMSL opt_sysvipc.h 70SEMOPM opt_sysvipc.h 71SEMUME opt_sysvipc.h 72MSGMNB opt_sysvipc.h 73MSGMNI opt_sysvipc.h 74MSGSEG opt_sysvipc.h 75MSGSSZ opt_sysvipc.h 76MSGTQL opt_sysvipc.h 77NO_SYSCTL_DESCR opt_global.h 78UCONSOLE 79ICMP_BANDLIM 80 81# POSIX kernel options 82_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 83 84# Do we want the config file compiled into the kernel? 85INCLUDE_CONFIG_FILE opt_config.h 86 87# Options for static file systems. These should only be used at config 88# time, since the corresponding lkms cannot work if there are any static 89# dependencies. Unusability is enforced by hiding the defines for the 90# options in a never-included header. 91EXT2FS opt_dontuse.h 92HAMMER opt_dontuse.h 93HAMMER2 opt_dontuse.h 94HPFS opt_dontuse.h 95MFS opt_dontuse.h 96MSDOSFS opt_dontuse.h 97NTFS opt_dontuse.h 98NULLFS opt_dontuse.h 99PROCFS opt_dontuse.h 100SMBFS opt_dontuse.h 101TMPFS opt_dontuse.h 102UDF opt_dontuse.h 103AUTOFS opt_dontuse.h 104FUSE opt_dontuse.h 105 106# These static filesystems has one slightly bogus static dependency in 107# sys/platform/.../x86_64/autoconf.c. If any of these filesystems are 108# statically compiled into the kernel, code for mounting them as root 109# filesystems will be enabled - but look below. Boot-code is purposely 110# unavailable for the LKM-based versions. 111CD9660 112FFS 113NFS 114 115# filesystems and libiconv bridge 116CD9660_ICONV opt_dontuse.h 117MSDOSFS_ICONV opt_dontuse.h 118NTFS_ICONV opt_dontuse.h 119 120# SMB/CIFS requester 121NETSMB opt_netsmb.h 122 123# If you are following the conditions in the copyright, 124# you can enable soft-updates which will speed up a lot of things 125# and make the system safer from crashes at the same time. 126# otherwise a STUB module will be compiled in. 127SOFTUPDATES opt_ffs.h 128 129# Enable fast hash lookups for large directories on UFS-based filesystems. 130UFS_DIRHASH opt_ufs.h 131 132# The above static dependencies are planned removed, with a 133# <filesystem>_ROOT option to control if it usable as root. This list 134# allows these options to be present in config files already (though 135# they won't make any difference yet). 136NFS_ROOT opt_nfsroot.h 137 138# Options used only in subr_param.c. 139HZ opt_param.h 140MAXFILES opt_param.h 141NBUF opt_param.h 142NMBCLUSTERS opt_param.h 143NMBUFS opt_param.h 144VM_BCACHE_SIZE_MAX opt_param.h 145VM_SWZONE_SIZE_MAX opt_param.h 146MAXUSERS 147DFLDSIZ opt_param.h 148MAXDSIZ opt_param.h 149MAXSSIZ opt_param.h 150 151# Generic SCSI options. 152CAM_MAX_HIGHPOWER opt_cam.h 153CAMDEBUG opt_cam.h 154CAM_DEBUG_DELAY opt_cam.h 155CAM_DEBUG_BUS opt_cam.h 156CAM_DEBUG_TARGET opt_cam.h 157CAM_DEBUG_LUN opt_cam.h 158CAM_DEBUG_FLAGS opt_cam.h 159SCSI_DELAY opt_scsi.h 160SCSI_NO_SENSE_STRINGS opt_scsi.h 161SCSI_NO_OP_STRINGS opt_scsi.h 162 163# iSCSI options 164ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 165 166# Options used only in cam/scsi/scsi_cd.c 167CHANGER_MIN_BUSY_SECONDS opt_cd.h 168CHANGER_MAX_BUSY_SECONDS opt_cd.h 169 170# Options used only in cam/scsi/scsi_sa.c. 171SA_IO_TIMEOUT opt_sa.h 172SA_SPACE_TIMEOUT opt_sa.h 173SA_REWIND_TIMEOUT opt_sa.h 174SA_ERASE_TIMEOUT opt_sa.h 175SA_1FM_AT_EOD opt_sa.h 176 177# Options used only in cam/scsi/scsi_pt.c 178SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 179 180# Options used only in cam/scsi/scsi_ses.c 181SES_ENABLE_PASSTHROUGH opt_ses.h 182 183# Options used in dev/sym/ (Symbios SCSI driver). 184SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 185 # Allows the ncr to take precedence 186 # 1 (1<<0) -> 810a, 860 187 # 2 (1<<1) -> 825a, 875, 885, 895 188 # 4 (1<<2) -> 895a, 896, 1510d 189SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 190 # disabled:0 (default), enabled:1 191SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 192 # disabled:0, enabled:1 (default) 193SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 194 # default:8, range:[1..64] 195 196# Options used only in pci/ncr.c 197SCSI_NCR_DEBUG opt_ncr.h 198SCSI_NCR_MAX_SYNC opt_ncr.h 199SCSI_NCR_MAX_WIDE opt_ncr.h 200SCSI_NCR_MYADDR opt_ncr.h 201 202# Options used only in pci/isp_pci.c 203ISP_TARGET_MODE opt_isp.h 204 205# Options used in the 'nata' ATA/ATAPI driver 206ATA_STATIC_ID opt_ata.h 207 208# Options used in the 'nata' chipset driver 209ATA_NO_ACARD opt_ata.h 210ATA_NO_ACERLABS opt_ata.h 211ATA_NO_AHCI opt_ata.h 212ATA_NO_AMD opt_ata.h 213ATA_NO_CYPRESS opt_ata.h 214ATA_NO_CYRIX opt_ata.h 215ATA_NO_HIGHPOINT opt_ata.h 216ATA_NO_INTEL opt_ata.h 217ATA_NO_ITE opt_ata.h 218ATA_NO_JMICRON opt_ata.h 219ATA_NO_MARVELL opt_ata.h 220ATA_NO_NATIONAL opt_ata.h 221ATA_NO_NETCELL opt_ata.h 222ATA_NO_NVIDIA opt_ata.h 223ATA_NO_PROMISE opt_ata.h 224ATA_NO_SERVERWORKS opt_ata.h 225ATA_NO_SILICONIMAGE opt_ata.h 226ATA_NO_SIS opt_ata.h 227ATA_NO_VIA opt_ata.h 228 229PVSCSI_DEBUG_LOGGING opt_pvscsi.h 230 231# Net stuff. 232# altq stuff 233ALTQ opt_global.h 234ALTQ_CBQ opt_altq.h 235ALTQ_RED opt_altq.h 236ALTQ_RIO opt_altq.h 237ALTQ_HFSC opt_altq.h 238ALTQ_PRIQ opt_altq.h 239ALTQ_FAIRQ opt_altq.h 240ALTQ_NOPCC opt_altq.h 241ALTQ_DEBUG opt_altq.h 242 243ACCEPT_FILTER_DATA 244ACCEPT_FILTER_HTTP 245BOOTP opt_bootp.h 246BOOTP_COMPAT opt_bootp.h 247BOOTP_NFSROOT opt_bootp.h 248BOOTP_WIRED_TO opt_bootp.h 249CARP opt_carp.h 250MROUTING opt_mrouting.h 251PIM opt_mrouting.h 252INET opt_inet.h 253INET6 opt_inet6.h 254IPDIVERT 255DUMMYNET opt_ipdn.h 256DUMMYNET_DEBUG opt_ipdn.h 257IPFIREWALL opt_ipfw.h 258IPFIREWALL3 opt_ipfw.h 259IPFIREWALL_DEBUG opt_ipfw.h 260IPFIREWALL_VERBOSE opt_ipfw.h 261IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 262IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 263IPV6FIREWALL opt_ip6fw.h 264IPV6FIREWALL_VERBOSE opt_ip6fw.h 265IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 266IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 267IPSTEALTH 268LIBMCHAIN 269MPLS opt_mpls.h 270TCPDEBUG 271#TCP_SIGNATURE opt_inet.h 272TCP_DROP_SYNFIN opt_tcp_input.h 273ICMPPRINTFS 274 275XBONEHACK 276MBUF_STRESS_TEST opt_mbuf_stress_test.h 277 278# (New netgraph, port still in progress) 279# 280# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 281# Each netgraph node type can be either be compiled into the kernel 282# or loaded dynamically. To get the former, include the corresponding 283# option below. Each type has its own man page, e.g. ng_async(4). 284NETGRAPH7 285NETGRAPH7_DEBUG opt_netgraph.h 286NETGRAPH7_ASYNC opt_netgraph.h 287NETGRAPH7_ATMLLC opt_netgraph.h 288NETGRAPH7_ATM_ATMPIF opt_netgraph.h 289NETGRAPH7_BLUETOOTH opt_netgraph.h 290NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 291NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 292NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 293NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 294NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 295NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 296NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 297NETGRAPH7_BPF opt_netgraph.h 298NETGRAPH7_BRIDGE opt_netgraph.h 299NETGRAPH7_CAR opt_netgraph.h 300NETGRAPH7_CISCO opt_netgraph.h 301NETGRAPH7_DEFLATE opt_netgraph.h 302NETGRAPH7_DEVICE opt_netgraph.h 303NETGRAPH7_ECHO opt_netgraph.h 304NETGRAPH7_EIFACE opt_netgraph.h 305NETGRAPH7_ETF opt_netgraph.h 306NETGRAPH7_ETHER opt_netgraph.h 307NETGRAPH7_FEC opt_netgraph.h 308NETGRAPH7_FRAME_RELAY opt_netgraph.h 309NETGRAPH7_GIF opt_netgraph.h 310NETGRAPH7_GIF_DEMUX opt_netgraph.h 311NETGRAPH7_HOLE opt_netgraph.h 312NETGRAPH7_HUB opt_netgraph.h 313NETGRAPH7_IFACE opt_netgraph.h 314NETGRAPH7_IP_INPUT opt_netgraph.h 315NETGRAPH7_IPFW opt_netgraph.h 316NETGRAPH7_KSOCKET opt_netgraph.h 317NETGRAPH7_L2TP opt_netgraph.h 318NETGRAPH7_LMI opt_netgraph.h 319# MPPC compression requires proprietary files (not included) 320NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 321NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 322NETGRAPH7_NAT opt_netgraph.h 323NETGRAPH7_NETFLOW opt_netgraph.h 324NETGRAPH7_ONE2MANY opt_netgraph.h 325NETGRAPH7_PPP opt_netgraph.h 326NETGRAPH7_PPPOE opt_netgraph.h 327NETGRAPH7_PPTPGRE opt_netgraph.h 328NETGRAPH7_PRED1 opt_netgraph.h 329NETGRAPH7_RFC1490 opt_netgraph.h 330NETGRAPH7_SOCKET opt_netgraph.h 331NETGRAPH7_SPLIT opt_netgraph.h 332NETGRAPH7_SPPP opt_netgraph.h 333NETGRAPH7_TAG opt_netgraph.h 334NETGRAPH7_TCPMSS opt_netgraph.h 335NETGRAPH7_TEE opt_netgraph.h 336NETGRAPH7_TTY opt_netgraph.h 337NETGRAPH7_UI opt_netgraph.h 338NETGRAPH7_VJC opt_netgraph.h 339 340# NgATM options 341NGATM7_ATM opt_netgraph.h 342NGATM7_ATMBASE opt_netgraph.h 343NGATM7_SSCOP opt_netgraph.h 344NGATM7_SSCFU opt_netgraph.h 345NGATM7_UNI opt_netgraph.h 346NGATM7_CCATM opt_netgraph.h 347 348# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 349# Each netgraph node type can be either be compiled into the kernel 350# or loaded dynamically. To get the former, include the corresponding 351# option below. Each type has its own man page, e.g. ng_async(8). 352NETGRAPH 353NETGRAPH_ASYNC opt_netgraph.h 354NETGRAPH_BPF opt_netgraph.h 355NETGRAPH_BRIDGE opt_netgraph.h 356NETGRAPH_CISCO opt_netgraph.h 357NETGRAPH_ECHO opt_netgraph.h 358NETGRAPH_EIFACE opt_netgraph.h 359NETGRAPH_ETHER opt_netgraph.h 360NETGRAPH_FEC opt_netgraph.h 361NETGRAPH_FRAME_RELAY opt_netgraph.h 362NETGRAPH_HOLE opt_netgraph.h 363NETGRAPH_IFACE opt_netgraph.h 364NETGRAPH_KSOCKET opt_netgraph.h 365NETGRAPH_LMI opt_netgraph.h 366NETGRAPH_L2TP opt_netgraph.h 367# MPPC compression requires proprietary files (not included) 368NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 369NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 370NETGRAPH_ONE2MANY opt_netgraph.h 371NETGRAPH_PPP opt_netgraph.h 372NETGRAPH_PPPOE opt_netgraph.h 373NETGRAPH_PPTPGRE opt_netgraph.h 374NETGRAPH_RFC1490 opt_netgraph.h 375NETGRAPH_SOCKET opt_netgraph.h 376NETGRAPH_TEE opt_netgraph.h 377NETGRAPH_TTY opt_netgraph.h 378NETGRAPH_UI opt_netgraph.h 379NETGRAPH_VJC opt_netgraph.h 380 381# AGP options 382AGP_DEBUG opt_agp.h 383 384# DRM options 385DRM_DEBUG opt_drm.h 386VGA_SWITCHEROO opt_drm.h 387 388# DPT driver debug flags 389DPT_MEASURE_PERFORMANCE opt_dpt.h 390DPT_HANDLE_TIMEOUTS opt_dpt.h 391DPT_TIMEOUT_FACTOR opt_dpt.h 392DPT_LOST_IRQ opt_dpt.h 393DPT_RESET_HBA opt_dpt.h 394 395# Misc debug flags. Most of these should probably be replaced with 396# 'DEBUG', and then let people recompile just the interesting modules 397# with 'make CC="cc -DDEBUG"'. 398CLUSTERDEBUG opt_debug_cluster.h 399DEBUG_1284 opt_ppb_1284.h 400VP0_DEBUG opt_vpo.h 401LPT_DEBUG opt_lpt.h 402PLIP_DEBUG opt_plip.h 403LOCKF_DEBUG opt_debug_lockf.h 404 405# Fb options 406FB_DEBUG opt_fb.h 407FB_INSTALL_CDEV opt_fb.h 408 409# ppbus related options 410PERIPH_1284 opt_ppb_1284.h 411DONTPROBE_1284 opt_ppb_1284.h 412 413# smbus related options 414ENABLE_ALART opt_intpm.h 415 416# These cause changes all over the kernel 417NO_LWKT_SPLIT_USERPRI opt_global.h 418BLKDEV_IOSIZE opt_global.h 419DEBUG opt_global.h 420DEBUG_LOCKS opt_global.h 421DEBUG_LOCKS_LATENCY opt_global.h 422DEBUG_CRIT_SECTIONS opt_global.h 423DIAGNOSTIC opt_global.h 424INVARIANTS opt_global.h 425VFS_BIO_DEBUG opt_global.h 426SOCKBUF_DEBUG opt_global.h 427PANIC_DEBUG opt_global.h 428MBUF_DEBUG opt_global.h 429PMAP_DEBUG opt_global.h 430VM_PAGE_DEBUG opt_global.h 431SLAB_DEBUG opt_global.h 432 433# Sample system/interrupt PC 434DEBUG_PCTRACK opt_pctrack.h 435 436# These are VM related options 437NO_SWAPPING opt_vm.h 438 439# sys/netkey 440KEY 441 442# Size of the kernel message buffer 443MSGBUF_SIZE opt_msgbuf.h 444 445# NFS options 446NFS_MINATTRTIMO opt_nfs.h 447NFS_MAXATTRTIMO opt_nfs.h 448NFS_MINDIRATTRTIMO opt_nfs.h 449NFS_MAXDIRATTRTIMO opt_nfs.h 450NFS_GATHERDELAY opt_nfs.h 451NFS_UIDHASHSIZ opt_nfs.h 452NFS_WDELAYHASHSIZ opt_nfs.h 453NFS_MUIDHASHSIZ opt_nfs.h 454NFS_NOSERVER opt_nfs.h 455NFS_DEBUG opt_nfs.h 456 457# MSDOSFS options 458MSDOSFS_DEBUG opt_msdosfs.h 459 460# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 461BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 462BROOKTREE_ALLOC_PAGES opt_bktr.h 463BKTR_OVERRIDE_CARD opt_bktr.h 464BKTR_OVERRIDE_TUNER opt_bktr.h 465BKTR_OVERRIDE_DBX opt_bktr.h 466BKTR_OVERRIDE_MSP opt_bktr.h 467BKTR_SYSTEM_DEFAULT opt_bktr.h 468BKTR_ALLOC_PAGES opt_bktr.h 469BKTR_USE_PLL opt_bktr.h 470BKTR_GPIO_ACCESS opt_bktr.h 471BKTR_NO_MSP_RESET opt_bktr.h 472BKTR_430_FX_MODE opt_bktr.h 473BKTR_SIS_VIA_MODE opt_bktr.h 474BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 475 476# Various mi ISA bus flags 477COM_ESP opt_sio.h 478COM_MULTIPORT opt_sio.h 479BREAK_TO_DEBUGGER opt_comconsole.h 480ALT_BREAK_TO_DEBUGGER opt_comconsole.h 481 482# options for bus/device framework 483BUS_DEBUG opt_bus.h 484 485# options for USB support 486OHCI_DEBUG opt_usb.h 487USB_DEBUG opt_usb.h 488 489# options for the Realtek RTL8188*U/RTL8192CU driver (urtwn) 490URTWN_WITHOUT_UCODE opt_urtwn.h 491 492# Vinum options 493VINUMDEBUG opt_vinum.h 494 495# Embedded system options 496UKBD_DFLT_KEYMAP opt_ukbd.h 497INIT_PATH opt_init_path.h 498 499ROOTDEVNAME opt_rootdevname.h 500 501FDC_DEBUG opt_fdc.h 502PCFCLOCK_VERBOSE opt_pcfclock.h 503PCFCLOCK_MAX_RETRIES opt_pcfclock.h 504 505# Network device queue based polling 506IFPOLL_ENABLE opt_ifpoll.h 507 508# options for ubsec driver 509UBSEC_DEBUG opt_ubsec.h 510UBSEC_RNDTEST opt_ubsec.h 511UBSEC_NO_RNG opt_ubsec.h 512 513# options for hifn driver 514HIFN_DEBUG opt_hifn.h 515HIFN_RNDTEST opt_hifn.h 516HIFN_NO_RNG opt_hifn.h 517 518# options for safenet driver 519SAFE_DEBUG opt_safe.h 520SAFE_NO_RNG opt_safe.h 521SAFE_RNDTEST opt_safe.h 522 523# KTR options 524KTR opt_global.h 525KTR_ENTRIES opt_global.h 526KTR_ALL opt_ktr.h 527KTR_ACPI_EC opt_ktr.h 528KTR_CTXSW opt_ktr.h 529KTR_DMCRYPT opt_ktr.h 530KTR_ETHERNET opt_ktr.h 531KTR_HAMMER opt_ktr.h 532KTR_IFQ opt_ktr.h 533KTR_IF_BGE opt_ktr.h 534KTR_IF_EM opt_ktr.h 535KTR_IF_EMX opt_ktr.h 536KTR_IF_START opt_ktr.h 537KTR_IPIQ opt_ktr.h 538KTR_KERNENTRY opt_ktr.h 539KTR_LAPIC opt_ktr.h 540KTR_MEMORY opt_ktr.h 541KTR_SERIALIZER opt_ktr.h 542KTR_SPIN_CONTENTION opt_ktr.h 543KTR_TESTLOG opt_ktr.h 544KTR_TOKENS opt_ktr.h 545KTR_TSLEEP opt_ktr.h 546KTR_USCHED_BSD4 opt_ktr.h 547KTR_USCHED_DFLY opt_ktr.h 548KTR_VERBOSE opt_ktr.h 549KTR_IF_POLL opt_ktr.h 550KTR_UDP opt_ktr.h 551KTR_SOWAKEUP opt_ktr.h 552 553# NTFS options 554NTFS_DEBUG opt_ntfs.h 555 556# options for the Atheros driver 557ATH_DEBUG opt_ath.h 558#ATH_DEBUG_ALQ opt_ath.h 559ATH_DIAGAPI opt_ath.h 560#ATH_EEPROM_FIRMWARE opt_ath.h 561#ATH_ENABLE_11N opt_ath.h 562ATH_ENABLE_DFS opt_ath.h 563#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 564ATH_KTR_INTR_DEBUG opt_ath.h 565#ATH_TX99_DIAG opt_ath.h 566 567# ...and its HAL 568AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 569AH_ASSERT opt_ah.h 570AH_DEBUG opt_ah.h 571#AH_DEBUG_ALQ opt_ah.h 572#AH_DEBUG_COUNTRY opt_ah.h 573AH_INTERRUPT_DEBUGGING opt_ah.h 574AH_MAXCHAN opt_ah.h 575AH_NEED_DESC_SWAP opt_ah.h 576AH_PRIVATE_DIAG opt_ah.h 577AH_RXCFG_SDMAMW_4BYTES opt_ah.h 578AH_SUPPORT_AR5416 opt_ah.h 579AH_SUPPORT_AR9130 opt_ah.h 580AH_SUPPORT_AR9330 opt_ah.h 581AH_SUPPORT_AR9340 opt_ah.h 582AH_USE_INIPDGAIN opt_ah.h 583#AH_WRITE_EEPROM opt_ah.h 584#AH_WRITE_REGDOMAIN opt_ah.h 585 586# bce driver 587BCE_RSS_DEBUG opt_bce.h 588BCE_TSS_DEBUG opt_bce.h 589 590# bnx driver 591BNX_RSS_DEBUG opt_bnx.h 592BNX_TSO_DEBUG opt_bnx.h 593BNX_TSS_DEBUG opt_bnx.h 594 595# bwn driver 596BWN_DEBUG opt_bwn.h 597BWN_RXRING_SLOTS opt_bwn.h 598BWN_TXRING_SLOTS opt_bwn.h 599 600# siba_bwn driver 601SIBA_DEBUG opt_siba.h 602 603# emx driver 604EMX_RSS_DEBUG opt_emx.h 605EMX_TSO_DEBUG opt_emx.h 606EMX_TSS_DEBUG opt_emx.h 607 608# jme driver 609JME_RSS_DEBUG opt_jme.h 610 611# igb driver 612IGB_RSS_DEBUG opt_igb.h 613IGB_TSS_DEBUG opt_igb.h 614IGB_MSIX_DEBUG opt_igb.h 615 616# ix driver 617IX_RSS_DEBUG opt_ix.h 618 619# Options for the Intel 802.11ac wireless driver 620IWM_DEBUG opt_iwm.h 621 622# Options for the Intel 802.11n wireless driver 623IWN_DEBUG opt_iwn.h 624 625# Options for the Intel 3945ABG wireless driver 626WPI_DEBUG opt_wpi.h 627 628# dcons options 629DCONS_BUF_SIZE opt_dcons.h 630DCONS_POLL_HZ opt_dcons.h 631DCONS_FORCE_CONSOLE opt_dcons.h 632DCONS_FORCE_GDB opt_dcons.h 633 634# deprecated drivers and options 635I_WANT_DEPRECATED_STUFF opt_deprecated.h 636 637# Receive Side Scaling (now basecode) 638RSS_DEBUG opt_rss.h 639 640# Panic settings 641WDOG_DISABLE_ON_PANIC opt_panic.h 642ERROR_LED_ON_PANIC opt_panic.h 643 644# 802.11 support layer 645IEEE80211_DEBUG opt_wlan.h 646IEEE80211_DEBUG_REFCNT opt_wlan.h 647IEEE80211_SUPPORT_MESH opt_wlan.h 648IEEE80211_SUPPORT_SUPERG opt_wlan.h 649IEEE80211_SUPPORT_TDMA opt_wlan.h 650 651# 802.11 TDMA support 652TDMA_SLOTLEN_DEFAULT opt_tdma.h 653TDMA_SLOTCNT_DEFAULT opt_tdma.h 654TDMA_BINTVAL_DEFAULT opt_tdma.h 655TDMA_TXRATE_11B_DEFAULT opt_tdma.h 656TDMA_TXRATE_11G_DEFAULT opt_tdma.h 657TDMA_TXRATE_11A_DEFAULT opt_tdma.h 658TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 659TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 660TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 661TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 662TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 663 664# Sound options 665SND_DEBUG opt_snd.h 666SND_DIAGNOSTIC opt_snd.h 667SND_FEEDER_MULTIFORMAT opt_snd.h 668SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 669SND_FEEDER_RATE_HP opt_snd.h 670SND_OLDSTEREO opt_snd.h 671 672PANIC_REBOOT_WAIT_TIME opt_panic.h 673 674# This options turns TPM into entropy source. 675TPM_HARVEST opt_tpm.h 676 677# Evdev protocol support 678EVDEV_SUPPORT opt_evdev.h 679EVDEV_DEBUG opt_evdev.h 680 681# Sysctl debugging 682SYSCTL_DEBUG opt_sysctl.h 683 684# Obsolete options (will be removed in the future) 685# 686NDISAPI opt_dontuse.h 687