1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT64 to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 37 # mapped I/O 38AMR_DEBUG opt_amr.h 39TWA_DEBUG opt_twa.h 40 41#options for ACPI support 42ACPI_DEBUG opt_acpi.h 43ACPI_NO_SEMAPHORES opt_acpi.h 44ACPI_ENABLE_PCI opt_acpi.h 45 46# Miscellaneous options. 47COMPILING_LINT opt_lint.h 48DDB 49DDB_TRACE 50DDB_UNATTENDED opt_ddb.h 51GDB_REMOTE_CHAT opt_ddb.h 52KTRACE 53LIBICONV 54MD_NSECT opt_md.h 55MD_ROOT opt_md.h 56MD_ROOT_SIZE opt_md.h 57MFI_DEBUG opt_mfi.h 58NSWAPDEV opt_swap.h 59NSWBUF_MIN opt_swap.h 60PPS_SYNC opt_ntp.h 61QUOTA 62SUIDDIR opt_suiddir.h 63SHMMIN opt_sysvipc.h 64SHMMNI opt_sysvipc.h 65SHMSEG opt_sysvipc.h 66SEMMAP opt_sysvipc.h 67SEMMNI opt_sysvipc.h 68SEMMNS opt_sysvipc.h 69SEMMNU opt_sysvipc.h 70SEMMSL opt_sysvipc.h 71SEMOPM opt_sysvipc.h 72SEMUME opt_sysvipc.h 73MSGMNB opt_sysvipc.h 74MSGMNI opt_sysvipc.h 75MSGSEG opt_sysvipc.h 76MSGSSZ opt_sysvipc.h 77MSGTQL opt_sysvipc.h 78UCONSOLE 79ICMP_BANDLIM 80SHOW_BUSYBUFS 81 82# POSIX kernel options 83_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 84 85# Do we want the config file compiled into the kernel? 86INCLUDE_CONFIG_FILE opt_config.h 87 88# Options for static file systems. These should only be used at config 89# time, since the corresponding lkms cannot work if there are any static 90# dependencies. Unusability is enforced by hiding the defines for the 91# options in a never-included header. 92EXT2FS opt_dontuse.h 93HAMMER opt_dontuse.h 94HAMMER2 opt_dontuse.h 95HPFS opt_dontuse.h 96MFS opt_dontuse.h 97MSDOSFS opt_dontuse.h 98NTFS opt_dontuse.h 99NULLFS opt_dontuse.h 100PROCFS opt_dontuse.h 101PUFFS opt_dontuse.h 102SMBFS opt_dontuse.h 103TMPFS opt_dontuse.h 104UDF opt_dontuse.h 105AUTOFS opt_dontuse.h 106 107# These static filesystems has one slightly bogus static dependency in 108# sys/platform/.../i386/autoconf.c. If any of these filesystems are 109# statically compiled into the kernel, code for mounting them as root 110# filesystems will be enabled - but look below. Boot-code is purposely 111# unavailable for the LKM-based versions. 112CD9660 113FFS 114NFS 115 116# filesystems and libiconv bridge 117CD9660_ICONV opt_dontuse.h 118MSDOSFS_ICONV opt_dontuse.h 119NTFS_ICONV opt_dontuse.h 120 121# SMB/CIFS requester 122NETSMB opt_netsmb.h 123 124# If you are following the conditions in the copyright, 125# you can enable soft-updates which will speed up a lot of things 126# and make the system safer from crashes at the same time. 127# otherwise a STUB module will be compiled in. 128SOFTUPDATES opt_ffs.h 129 130# Enable fast hash lookups for large directories on UFS-based filesystems. 131UFS_DIRHASH opt_ufs.h 132 133# The above static dependencies are planned removed, with a 134# <filesystem>_ROOT option to control if it usable as root. This list 135# allows these options to be present in config files already (though 136# they won't make any difference yet). 137FFS_ROOT opt_ffs.h 138NFS_ROOT opt_nfsroot.h 139 140# Options used only in subr_param.c. 141HZ opt_param.h 142MAXFILES opt_param.h 143NBUF opt_param.h 144NMBCLUSTERS opt_param.h 145NMBUFS opt_param.h 146VM_BCACHE_SIZE_MAX opt_param.h 147VM_SWZONE_SIZE_MAX opt_param.h 148MAXUSERS 149DFLDSIZ opt_param.h 150MAXDSIZ opt_param.h 151MAXSSIZ opt_param.h 152 153# Generic SCSI options. 154CAM_MAX_HIGHPOWER opt_cam.h 155CAMDEBUG opt_cam.h 156CAM_DEBUG_DELAY opt_cam.h 157CAM_DEBUG_BUS opt_cam.h 158CAM_DEBUG_TARGET opt_cam.h 159CAM_DEBUG_LUN opt_cam.h 160CAM_DEBUG_FLAGS opt_cam.h 161SCSI_DELAY opt_scsi.h 162SCSI_NO_SENSE_STRINGS opt_scsi.h 163SCSI_NO_OP_STRINGS opt_scsi.h 164 165# iSCSI options 166ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 167 168# Options used only in cam/scsi/scsi_cd.c 169CHANGER_MIN_BUSY_SECONDS opt_cd.h 170CHANGER_MAX_BUSY_SECONDS opt_cd.h 171 172# Options used only in cam/scsi/scsi_sa.c. 173SA_IO_TIMEOUT opt_sa.h 174SA_SPACE_TIMEOUT opt_sa.h 175SA_REWIND_TIMEOUT opt_sa.h 176SA_ERASE_TIMEOUT opt_sa.h 177SA_1FM_AT_EOD opt_sa.h 178 179# Options used only in cam/scsi/scsi_pt.c 180SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 181 182# Options used only in cam/scsi/scsi_ses.c 183SES_ENABLE_PASSTHROUGH opt_ses.h 184 185# Options used in dev/sym/ (Symbios SCSI driver). 186SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 187 # Allows the ncr to take precedence 188 # 1 (1<<0) -> 810a, 860 189 # 2 (1<<1) -> 825a, 875, 885, 895 190 # 4 (1<<2) -> 895a, 896, 1510d 191SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 192 # disabled:0 (default), enabled:1 193SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 194 # disabled:0, enabled:1 (default) 195SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 196 # default:8, range:[1..64] 197 198# Options used only in pci/ncr.c 199SCSI_NCR_DEBUG opt_ncr.h 200SCSI_NCR_MAX_SYNC opt_ncr.h 201SCSI_NCR_MAX_WIDE opt_ncr.h 202SCSI_NCR_MYADDR opt_ncr.h 203 204# Options used only in pci/isp_pci.c 205ISP_TARGET_MODE opt_isp.h 206 207# Options used in the 'nata' ATA/ATAPI driver 208ATA_STATIC_ID opt_ata.h 209 210# Net stuff. 211# altq stuff 212ALTQ opt_global.h 213ALTQ_CBQ opt_altq.h 214ALTQ_RED opt_altq.h 215ALTQ_RIO opt_altq.h 216ALTQ_HFSC opt_altq.h 217ALTQ_PRIQ opt_altq.h 218ALTQ_FAIRQ opt_altq.h 219ALTQ_NOPCC opt_altq.h 220ALTQ_DEBUG opt_altq.h 221 222ACCEPT_FILTER_DATA 223ACCEPT_FILTER_HTTP 224BOOTP opt_bootp.h 225BOOTP_COMPAT opt_bootp.h 226BOOTP_NFSROOT opt_bootp.h 227BOOTP_WIRED_TO opt_bootp.h 228CARP opt_carp.h 229MROUTING opt_mrouting.h 230PIM opt_mrouting.h 231INET opt_inet.h 232INET6 opt_inet6.h 233IPSEC opt_ipsec.h 234IPSEC_ESP opt_ipsec.h 235IPSEC_DEBUG opt_ipsec.h 236IPSEC_FILTERGIF opt_ipsec.h 237FAST_IPSEC opt_ipsec.h 238IPDIVERT 239DUMMYNET opt_ipdn.h 240DUMMYNET_DEBUG opt_ipdn.h 241IPFIREWALL opt_ipfw.h 242IPFIREWALL3 opt_ipfw.h 243IPFIREWALL_DEBUG opt_ipfw.h 244IPFIREWALL_VERBOSE opt_ipfw.h 245IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 246IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 247IPV6FIREWALL opt_ip6fw.h 248IPV6FIREWALL_VERBOSE opt_ip6fw.h 249IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 250IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 251IPSTEALTH 252LIBMCHAIN 253MPLS opt_mpls.h 254PPP_BSDCOMP opt_ppp.h 255PPP_DEFLATE opt_ppp.h 256PPP_FILTER opt_ppp.h 257TCPDEBUG 258TCP_SIGNATURE opt_inet.h 259TCP_DROP_SYNFIN opt_tcp_input.h 260ICMPPRINTFS 261 262XBONEHACK 263MBUF_STRESS_TEST opt_mbuf_stress_test.h 264 265# (New netgraph, port still in progress) 266# 267# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 268# Each netgraph node type can be either be compiled into the kernel 269# or loaded dynamically. To get the former, include the corresponding 270# option below. Each type has its own man page, e.g. ng_async(4). 271NETGRAPH7 272NETGRAPH7_DEBUG opt_netgraph.h 273NETGRAPH7_ASYNC opt_netgraph.h 274NETGRAPH7_ATMLLC opt_netgraph.h 275NETGRAPH7_ATM_ATMPIF opt_netgraph.h 276NETGRAPH7_BLUETOOTH opt_netgraph.h 277NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 278NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 279NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 280NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 281NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 282NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 283NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 284NETGRAPH7_BPF opt_netgraph.h 285NETGRAPH7_BRIDGE opt_netgraph.h 286NETGRAPH7_CAR opt_netgraph.h 287NETGRAPH7_CISCO opt_netgraph.h 288NETGRAPH7_DEFLATE opt_netgraph.h 289NETGRAPH7_DEVICE opt_netgraph.h 290NETGRAPH7_ECHO opt_netgraph.h 291NETGRAPH7_EIFACE opt_netgraph.h 292NETGRAPH7_ETF opt_netgraph.h 293NETGRAPH7_ETHER opt_netgraph.h 294NETGRAPH7_FEC opt_netgraph.h 295NETGRAPH7_FRAME_RELAY opt_netgraph.h 296NETGRAPH7_GIF opt_netgraph.h 297NETGRAPH7_GIF_DEMUX opt_netgraph.h 298NETGRAPH7_HOLE opt_netgraph.h 299NETGRAPH7_HUB opt_netgraph.h 300NETGRAPH7_IFACE opt_netgraph.h 301NETGRAPH7_IP_INPUT opt_netgraph.h 302NETGRAPH7_IPFW opt_netgraph.h 303NETGRAPH7_KSOCKET opt_netgraph.h 304NETGRAPH7_L2TP opt_netgraph.h 305NETGRAPH7_LMI opt_netgraph.h 306# MPPC compression requires proprietary files (not included) 307NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 308NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 309NETGRAPH7_NAT opt_netgraph.h 310NETGRAPH7_NETFLOW opt_netgraph.h 311NETGRAPH7_ONE2MANY opt_netgraph.h 312NETGRAPH7_PPP opt_netgraph.h 313NETGRAPH7_PPPOE opt_netgraph.h 314NETGRAPH7_PPTPGRE opt_netgraph.h 315NETGRAPH7_PRED1 opt_netgraph.h 316NETGRAPH7_RFC1490 opt_netgraph.h 317NETGRAPH7_SOCKET opt_netgraph.h 318NETGRAPH7_SPLIT opt_netgraph.h 319NETGRAPH7_SPPP opt_netgraph.h 320NETGRAPH7_TAG opt_netgraph.h 321NETGRAPH7_TCPMSS opt_netgraph.h 322NETGRAPH7_TEE opt_netgraph.h 323NETGRAPH7_TTY opt_netgraph.h 324NETGRAPH7_UI opt_netgraph.h 325NETGRAPH7_VJC opt_netgraph.h 326 327# NgATM options 328NGATM7_ATM opt_netgraph.h 329NGATM7_ATMBASE opt_netgraph.h 330NGATM7_SSCOP opt_netgraph.h 331NGATM7_SSCFU opt_netgraph.h 332NGATM7_UNI opt_netgraph.h 333NGATM7_CCATM opt_netgraph.h 334 335# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 336# Each netgraph node type can be either be compiled into the kernel 337# or loaded dynamically. To get the former, include the corresponding 338# option below. Each type has its own man page, e.g. ng_async(8). 339NETGRAPH 340NETGRAPH_ASYNC opt_netgraph.h 341NETGRAPH_BPF opt_netgraph.h 342NETGRAPH_BRIDGE opt_netgraph.h 343NETGRAPH_CISCO opt_netgraph.h 344NETGRAPH_ECHO opt_netgraph.h 345NETGRAPH_EIFACE opt_netgraph.h 346NETGRAPH_ETHER opt_netgraph.h 347NETGRAPH_FEC opt_netgraph.h 348NETGRAPH_FRAME_RELAY opt_netgraph.h 349NETGRAPH_HOLE opt_netgraph.h 350NETGRAPH_IFACE opt_netgraph.h 351NETGRAPH_KSOCKET opt_netgraph.h 352NETGRAPH_LMI opt_netgraph.h 353NETGRAPH_L2TP opt_netgraph.h 354# MPPC compression requires proprietary files (not included) 355NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 356NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 357NETGRAPH_ONE2MANY opt_netgraph.h 358NETGRAPH_PPP opt_netgraph.h 359NETGRAPH_PPPOE opt_netgraph.h 360NETGRAPH_PPTPGRE opt_netgraph.h 361NETGRAPH_RFC1490 opt_netgraph.h 362NETGRAPH_SOCKET opt_netgraph.h 363NETGRAPH_TEE opt_netgraph.h 364NETGRAPH_TTY opt_netgraph.h 365NETGRAPH_UI opt_netgraph.h 366NETGRAPH_VJC opt_netgraph.h 367 368# AGP options 369AGP_DEBUG opt_agp.h 370 371# DRM options 372DRM_DEBUG opt_drm.h 373VGA_SWITCHEROO opt_drm.h 374 375# DPT driver debug flags 376DPT_MEASURE_PERFORMANCE opt_dpt.h 377DPT_HANDLE_TIMEOUTS opt_dpt.h 378DPT_TIMEOUT_FACTOR opt_dpt.h 379DPT_LOST_IRQ opt_dpt.h 380DPT_RESET_HBA opt_dpt.h 381 382# Misc debug flags. Most of these should probably be replaced with 383# 'DEBUG', and then let people recompile just the interesting modules 384# with 'make CC="cc -DDEBUG"'. 385CLUSTERDEBUG opt_debug_cluster.h 386DEBUG_1284 opt_ppb_1284.h 387VP0_DEBUG opt_vpo.h 388LPT_DEBUG opt_lpt.h 389PLIP_DEBUG opt_plip.h 390LOCKF_DEBUG opt_debug_lockf.h 391SI_DEBUG opt_debug_si.h 392 393# Fb options 394FB_DEBUG opt_fb.h 395FB_INSTALL_CDEV opt_fb.h 396 397# ppbus related options 398PERIPH_1284 opt_ppb_1284.h 399DONTPROBE_1284 opt_ppb_1284.h 400 401# smbus related options 402ENABLE_ALART opt_intpm.h 403 404# These cause changes all over the kernel 405NO_LWKT_SPLIT_USERPRI opt_global.h 406BLKDEV_IOSIZE opt_global.h 407DEBUG opt_global.h 408DEBUG_LOCKS opt_global.h 409DEBUG_LOCKS_LATENCY opt_global.h 410DEBUG_CRIT_SECTIONS opt_global.h 411DIAGNOSTIC opt_global.h 412INVARIANTS opt_global.h 413VFS_BIO_DEBUG opt_global.h 414SOCKBUF_DEBUG opt_global.h 415PANIC_DEBUG opt_global.h 416MBUF_DEBUG opt_global.h 417PMAP_DEBUG opt_global.h 418VM_PAGE_DEBUG opt_global.h 419SLAB_DEBUG opt_global.h 420 421# Sample system/interrupt PC 422DEBUG_PCTRACK opt_pctrack.h 423 424# These are VM related options 425NO_SWAPPING opt_vm.h 426 427# sys/netkey 428KEY 429 430# Size of the kernel message buffer 431MSGBUF_SIZE opt_msgbuf.h 432 433# NFS options 434NFS_MINATTRTIMO opt_nfs.h 435NFS_MAXATTRTIMO opt_nfs.h 436NFS_MINDIRATTRTIMO opt_nfs.h 437NFS_MAXDIRATTRTIMO opt_nfs.h 438NFS_GATHERDELAY opt_nfs.h 439NFS_UIDHASHSIZ opt_nfs.h 440NFS_WDELAYHASHSIZ opt_nfs.h 441NFS_MUIDHASHSIZ opt_nfs.h 442NFS_NOSERVER opt_nfs.h 443NFS_DEBUG opt_nfs.h 444 445# MSDOSFS options 446MSDOSFS_DEBUG opt_msdosfs.h 447 448# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 449BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 450BROOKTREE_ALLOC_PAGES opt_bktr.h 451BKTR_OVERRIDE_CARD opt_bktr.h 452BKTR_OVERRIDE_TUNER opt_bktr.h 453BKTR_OVERRIDE_DBX opt_bktr.h 454BKTR_OVERRIDE_MSP opt_bktr.h 455BKTR_SYSTEM_DEFAULT opt_bktr.h 456BKTR_ALLOC_PAGES opt_bktr.h 457BKTR_USE_PLL opt_bktr.h 458BKTR_GPIO_ACCESS opt_bktr.h 459BKTR_NO_MSP_RESET opt_bktr.h 460BKTR_430_FX_MODE opt_bktr.h 461BKTR_SIS_VIA_MODE opt_bktr.h 462BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 463 464# Various mi ISA bus flags 465COM_ESP opt_sio.h 466COM_MULTIPORT opt_sio.h 467BREAK_TO_DEBUGGER opt_comconsole.h 468ALT_BREAK_TO_DEBUGGER opt_comconsole.h 469 470# options for bus/device framework 471BUS_DEBUG opt_bus.h 472 473# options for USB support 474OHCI_DEBUG opt_usb.h 475USB_DEBUG opt_usb.h 476 477# options for the Realtek RTL8188*U/RTL8192CU driver (urtwn) 478URTWN_WITHOUT_UCODE opt_urtwn.h 479 480# Vinum options 481VINUMDEBUG opt_vinum.h 482 483# Embedded system options 484UKBD_DFLT_KEYMAP opt_ukbd.h 485INIT_PATH opt_init_path.h 486 487ROOTDEVNAME opt_rootdevname.h 488 489FDC_DEBUG opt_fdc.h 490PCFCLOCK_VERBOSE opt_pcfclock.h 491PCFCLOCK_MAX_RETRIES opt_pcfclock.h 492 493# Network device queue based polling 494IFPOLL_ENABLE opt_ifpoll.h 495 496# options for ubsec driver 497UBSEC_DEBUG opt_ubsec.h 498UBSEC_RNDTEST opt_ubsec.h 499UBSEC_NO_RNG opt_ubsec.h 500 501# options for hifn driver 502HIFN_DEBUG opt_hifn.h 503HIFN_RNDTEST opt_hifn.h 504HIFN_NO_RNG opt_hifn.h 505 506# options for safenet driver 507SAFE_DEBUG opt_safe.h 508SAFE_NO_RNG opt_safe.h 509SAFE_RNDTEST opt_safe.h 510 511# KTR options 512KTR opt_global.h 513KTR_ENTRIES opt_global.h 514KTR_ALL opt_ktr.h 515KTR_ACPI_EC opt_ktr.h 516KTR_CTXSW opt_ktr.h 517KTR_DMCRYPT opt_ktr.h 518KTR_ETHERNET opt_ktr.h 519KTR_HAMMER opt_ktr.h 520KTR_IFQ opt_ktr.h 521KTR_IF_BGE opt_ktr.h 522KTR_IF_EM opt_ktr.h 523KTR_IF_EMX opt_ktr.h 524KTR_IF_START opt_ktr.h 525KTR_IPIQ opt_ktr.h 526KTR_KERNENTRY opt_ktr.h 527KTR_MEMORY opt_ktr.h 528KTR_SERIALIZER opt_ktr.h 529KTR_SPIN_CONTENTION opt_ktr.h 530KTR_TESTLOG opt_ktr.h 531KTR_TOKENS opt_ktr.h 532KTR_TSLEEP opt_ktr.h 533KTR_USCHED_BSD4 opt_ktr.h 534KTR_USCHED_DFLY opt_ktr.h 535KTR_VERBOSE opt_ktr.h 536KTR_IF_POLL opt_ktr.h 537KTR_UDP opt_ktr.h 538KTR_SOWAKEUP opt_ktr.h 539 540# NTFS options 541NTFS_DEBUG opt_ntfs.h 542 543# options for the Atheros driver 544ATH_DEBUG opt_ath.h 545#ATH_DEBUG_ALQ opt_ath.h 546ATH_DIAGAPI opt_ath.h 547#ATH_EEPROM_FIRMWARE opt_ath.h 548#ATH_ENABLE_11N opt_ath.h 549ATH_ENABLE_DFS opt_ath.h 550#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 551ATH_KTR_INTR_DEBUG opt_ath.h 552#ATH_TX99_DIAG opt_ath.h 553 554# ...and its HAL 555AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 556AH_ASSERT opt_ah.h 557AH_DEBUG opt_ah.h 558#AH_DEBUG_ALQ opt_ah.h 559#AH_DEBUG_COUNTRY opt_ah.h 560AH_INTERRUPT_DEBUGGING opt_ah.h 561AH_MAXCHAN opt_ah.h 562AH_NEED_DESC_SWAP opt_ah.h 563AH_PRIVATE_DIAG opt_ah.h 564AH_RXCFG_SDMAMW_4BYTES opt_ah.h 565AH_SUPPORT_AR5416 opt_ah.h 566AH_SUPPORT_AR9130 opt_ah.h 567AH_SUPPORT_AR9330 opt_ah.h 568AH_SUPPORT_AR9340 opt_ah.h 569AH_USE_INIPDGAIN opt_ah.h 570#AH_WRITE_EEPROM opt_ah.h 571#AH_WRITE_REGDOMAIN opt_ah.h 572 573# bce driver 574BCE_RSS_DEBUG opt_bce.h 575BCE_TSS_DEBUG opt_bce.h 576 577# bnx driver 578BNX_RSS_DEBUG opt_bnx.h 579BNX_TSO_DEBUG opt_bnx.h 580BNX_TSS_DEBUG opt_bnx.h 581 582# bwn driver 583BWN_DEBUG opt_bwn.h 584BWN_RXRING_SLOTS opt_bwn.h 585BWN_TXRING_SLOTS opt_bwn.h 586 587# siba_bwn driver 588SIBA_DEBUG opt_siba.h 589 590# emx driver 591EMX_RSS_DEBUG opt_emx.h 592EMX_TSO_DEBUG opt_emx.h 593EMX_TSS_DEBUG opt_emx.h 594 595# jme driver 596JME_RSS_DEBUG opt_jme.h 597 598# igb driver 599IGB_RSS_DEBUG opt_igb.h 600IGB_TSS_DEBUG opt_igb.h 601IGB_MSIX_DEBUG opt_igb.h 602 603# ix driver 604IX_RSS_DEBUG opt_ix.h 605 606# Options for the Intel 802.11ac wireless driver 607IWM_DEBUG opt_iwm.h 608 609# Options for the Intel 802.11n wireless driver 610IWN_DEBUG opt_iwn.h 611 612# Options for the Intel 3945ABG wireless driver 613WPI_DEBUG opt_wpi.h 614 615# dcons options 616DCONS_BUF_SIZE opt_dcons.h 617DCONS_POLL_HZ opt_dcons.h 618DCONS_FORCE_CONSOLE opt_dcons.h 619DCONS_FORCE_GDB opt_dcons.h 620 621# deprecated drivers and options 622I_WANT_DEPRECATED_STUFF opt_deprecated.h 623 624# Receive Side Scaling (now basecode) 625RSS_DEBUG opt_rss.h 626 627# Panic settings 628WDOG_DISABLE_ON_PANIC opt_panic.h 629ERROR_LED_ON_PANIC opt_panic.h 630 631# 802.11 support layer 632IEEE80211_DEBUG opt_wlan.h 633IEEE80211_DEBUG_REFCNT opt_wlan.h 634IEEE80211_SUPPORT_MESH opt_wlan.h 635IEEE80211_SUPPORT_SUPERG opt_wlan.h 636IEEE80211_SUPPORT_TDMA opt_wlan.h 637 638# 802.11 TDMA support 639TDMA_SLOTLEN_DEFAULT opt_tdma.h 640TDMA_SLOTCNT_DEFAULT opt_tdma.h 641TDMA_BINTVAL_DEFAULT opt_tdma.h 642TDMA_TXRATE_11B_DEFAULT opt_tdma.h 643TDMA_TXRATE_11G_DEFAULT opt_tdma.h 644TDMA_TXRATE_11A_DEFAULT opt_tdma.h 645TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 646TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 647TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 648TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 649TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 650 651# Sound options 652SND_DEBUG opt_snd.h 653SND_DIAGNOSTIC opt_snd.h 654SND_FEEDER_MULTIFORMAT opt_snd.h 655SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 656SND_FEEDER_RATE_HP opt_snd.h 657SND_PCM_64 opt_snd.h 658SND_OLDSTEREO opt_snd.h 659 660PANIC_REBOOT_WAIT_TIME opt_panic.h 661 662# Obsolete options (will be removed in the future) 663# 664SYSVMSG opt_dontuse.h 665SYSVSEM opt_dontuse.h 666SYSVSHM opt_dontuse.h 667P1003_1B opt_dontuse.h 668_KPOSIX_VERSION opt_dontuse.h 669DSCHED_FQ opt_dontuse.h 670