1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68TWA_DEBUG opt_twa.h 69 70#options for ACPI support 71ACPI_DEBUG opt_acpi.h 72ACPI_NO_SEMAPHORES opt_acpi.h 73ACPI_ENABLE_PCI opt_acpi.h 74 75# Miscellaneous options. 76COMPAT_DF12 opt_compatdf12.h 77COMPAT_43 opt_compat.h 78COMPAT_SUNOS opt_compat.h 79COMPILING_LINT opt_lint.h 80DDB 81DDB_TRACE 82DDB_UNATTENDED opt_ddb.h 83GDB_REMOTE_CHAT opt_ddb.h 84HW_WDOG 85KTRACE 86LIBICONV 87MD_NSECT opt_md.h 88MD_ROOT opt_md.h 89MD_ROOT_SIZE opt_md.h 90MFI_DEBUG opt_mfi.h 91NSWAPDEV opt_swap.h 92NSWBUF_MIN opt_swap.h 93PPS_SYNC opt_ntp.h 94QUOTA 95SUIDDIR opt_suiddir.h 96SYSVMSG opt_sysvipc.h 97SYSVSEM opt_sysvipc.h 98SYSVSHM opt_sysvipc.h 99SHMALL opt_sysvipc.h 100SHMMAX opt_sysvipc.h 101SHMMAXPGS opt_sysvipc.h 102SHMMIN opt_sysvipc.h 103SHMMNI opt_sysvipc.h 104SHMSEG opt_sysvipc.h 105SEMMAP opt_sysvipc.h 106SEMMNI opt_sysvipc.h 107SEMMNS opt_sysvipc.h 108SEMMNU opt_sysvipc.h 109SEMMSL opt_sysvipc.h 110SEMOPM opt_sysvipc.h 111SEMUME opt_sysvipc.h 112MSGMNB opt_sysvipc.h 113MSGMNI opt_sysvipc.h 114MSGSEG opt_sysvipc.h 115MSGSSZ opt_sysvipc.h 116MSGTQL opt_sysvipc.h 117UCONSOLE 118ICMP_BANDLIM 119SHOW_BUSYBUFS 120DIRECTIO opt_directio.h 121 122# POSIX kernel options 123P1003_1B opt_posix.h 124_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 125_KPOSIX_VERSION opt_posix.h 126 127# Do we want the config file compiled into the kernel? 128INCLUDE_CONFIG_FILE opt_config.h 129 130# Options for static file systems. These should only be used at config 131# time, since the corresponding lkms cannot work if there are any static 132# dependencies. Unusability is enforced by hiding the defines for the 133# options in a never-included header. 134EXT2FS opt_dontuse.h 135FDESC opt_dontuse.h 136HPFS opt_dontuse.h 137MFS opt_dontuse.h 138MSDOSFS opt_dontuse.h 139NULLFS opt_dontuse.h 140PORTAL opt_dontuse.h 141PROCFS opt_dontuse.h 142UDF opt_dontuse.h 143NTFS opt_dontuse.h 144#TMPFS opt_dontuse.h 145 146# These static filesystems has one slightly bogus static dependency in 147# sys/platform/.../i386/autoconf.c. If any of these filesystems are 148# statically compiled into the kernel, code for mounting them as root 149# filesystems will be enabled - but look below. Boot-code is purposely 150# unavailable for the LKM-based versions. 151CD9660 152FFS 153NFS 154NWFS 155USERFS 156TMPFS 157HAMMER 158 159# filesystems and libiconv bridge 160CD9660_ICONV opt_dontuse.h 161MSDOSFS_ICONV opt_dontuse.h 162NTFS_ICONV opt_dontuse.h 163 164# If you are following the conditions in the copyright, 165# you can enable soft-updates which will speed up a lot of things 166# and make the system safer from crashes at the same time. 167# otherwise a STUB module will be compiled in. 168SOFTUPDATES opt_ffs.h 169 170# Enable fast hash lookups for large directories on UFS-based filesystems. 171UFS_DIRHASH opt_ufs.h 172 173# The above static dependencies are planned removed, with a 174# <filesystem>_ROOT option to control if it usable as root. This list 175# allows these options to be present in config files already (though 176# they won't make any difference yet). 177FFS_ROOT opt_ffs.h 178NFS_ROOT opt_nfsroot.h 179 180# The union static file system has bogus static dependencies, so it isn't 181# hidden yet. 182UNION 183 184# Options used only in subr_param.c. 185HZ opt_param.h 186MAXFILES opt_param.h 187NBUF opt_param.h 188NMBCLUSTERS opt_param.h 189NMBUFS opt_param.h 190VM_BCACHE_SIZE_MAX opt_param.h 191VM_SWZONE_SIZE_MAX opt_param.h 192MAXUSERS 193DFLDSIZ opt_param.h 194MAXDSIZ opt_param.h 195MAXSSIZ opt_param.h 196 197# Generic SCSI options. 198CAM_MAX_HIGHPOWER opt_cam.h 199CAMDEBUG opt_cam.h 200CAM_DEBUG_DELAY opt_cam.h 201CAM_DEBUG_BUS opt_cam.h 202CAM_DEBUG_TARGET opt_cam.h 203CAM_DEBUG_LUN opt_cam.h 204CAM_DEBUG_FLAGS opt_cam.h 205SCSI_DELAY opt_scsi.h 206SCSI_NO_SENSE_STRINGS opt_scsi.h 207SCSI_NO_OP_STRINGS opt_scsi.h 208 209# iSCSI options 210ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 211 212# Options used only in cam/scsi/scsi_cd.c 213CHANGER_MIN_BUSY_SECONDS opt_cd.h 214CHANGER_MAX_BUSY_SECONDS opt_cd.h 215 216# Options used only in cam/scsi/scsi_sa.c. 217SA_IO_TIMEOUT opt_sa.h 218SA_SPACE_TIMEOUT opt_sa.h 219SA_REWIND_TIMEOUT opt_sa.h 220SA_ERASE_TIMEOUT opt_sa.h 221SA_1FM_AT_EOD opt_sa.h 222 223# Options used only in cam/scsi/scsi_pt.c 224SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 225 226# Options used only in cam/scsi/scsi_ses.c 227SES_ENABLE_PASSTHROUGH opt_ses.h 228 229# Options used in dev/sym/ (Symbios SCSI driver). 230SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 231 # Allows the ncr to take precedence 232 # 1 (1<<0) -> 810a, 860 233 # 2 (1<<1) -> 825a, 875, 885, 895 234 # 4 (1<<2) -> 895a, 896, 1510d 235SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 236 # disabled:0 (default), enabled:1 237SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 238 # disabled:0, enabled:1 (default) 239SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 240 # default:8, range:[1..64] 241 242# Options used only in pci/ncr.c 243SCSI_NCR_DEBUG opt_ncr.h 244SCSI_NCR_MAX_SYNC opt_ncr.h 245SCSI_NCR_MAX_WIDE opt_ncr.h 246SCSI_NCR_MYADDR opt_ncr.h 247 248# Options used only in pci/isp_pci.c 249ISP_TARGET_MODE opt_isp.h 250 251# Options used in the 'ata' ATA/ATAPI driver 252ATA_STATIC_ID opt_ata.h 253 254# Net stuff. 255# altq stuff 256ALTQ opt_global.h 257ALTQ_CBQ opt_altq.h 258ALTQ_RED opt_altq.h 259ALTQ_RIO opt_altq.h 260ALTQ_HFSC opt_altq.h 261ALTQ_PRIQ opt_altq.h 262ALTQ_FAIRQ opt_altq.h 263ALTQ_NOPCC opt_altq.h 264ALTQ_DEBUG opt_altq.h 265 266ACCEPT_FILTER_DATA 267ACCEPT_FILTER_HTTP 268BOOTP opt_bootp.h 269BOOTP_COMPAT opt_bootp.h 270BOOTP_NFSROOT opt_bootp.h 271BOOTP_NFSV3 opt_bootp.h 272BOOTP_WIRED_TO opt_bootp.h 273CARP opt_carp.h 274ETHER_II opt_ef.h 275ETHER_8023 opt_ef.h 276ETHER_8022 opt_ef.h 277ETHER_SNAP opt_ef.h 278MROUTING opt_mrouting.h 279PIM opt_mrouting.h 280INET opt_inet.h 281INET6 opt_inet6.h 282IPSEC opt_ipsec.h 283IPSEC_ESP opt_ipsec.h 284IPSEC_DEBUG opt_ipsec.h 285IPSEC_FILTERGIF opt_ipsec.h 286FAST_IPSEC opt_ipsec.h 287IPDIVERT 288DUMMYNET opt_ipdn.h 289DUMMYNET_DEBUG opt_ipdn.h 290IPFIREWALL opt_ipfw.h 291IPFIREWALL_DEBUG opt_ipfw.h 292IPFIREWALL_VERBOSE opt_ipfw.h 293IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 294IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 295IPFIREWALL_FORWARD opt_ipfw.h 296IPV6FIREWALL opt_ip6fw.h 297IPV6FIREWALL_VERBOSE opt_ip6fw.h 298IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 299IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 300IPSTEALTH 301IPX opt_ipx.h 302IPXIP opt_ipx.h 303IPTUNNEL opt_ipx.h 304LIBMCHAIN 305MPLS opt_mpls.h 306NCP opt_ncp.h 307NETATALK opt_atalk.h 308PPP_BSDCOMP opt_ppp.h 309PPP_DEFLATE opt_ppp.h 310PPP_FILTER opt_ppp.h 311SLIP_IFF_OPTS opt_slip.h 312TCPDEBUG 313TCP_SIGNATURE opt_inet.h 314TCP_DROP_SYNFIN opt_tcp_input.h 315 316XBONEHACK 317MBUF_STRESS_TEST opt_mbuf_stress_test.h 318 319# (New netgraph, port still in progress) 320# 321# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 322# Each netgraph node type can be either be compiled into the kernel 323# or loaded dynamically. To get the former, include the corresponding 324# option below. Each type has its own man page, e.g. ng_async(4). 325NETGRAPH7 326NETGRAPH7_DEBUG opt_netgraph.h 327NETGRAPH7_ASYNC opt_netgraph.h 328NETGRAPH7_ATMLLC opt_netgraph.h 329NETGRAPH7_ATM_ATMPIF opt_netgraph.h 330NETGRAPH7_BLUETOOTH opt_netgraph.h 331NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 332NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 333NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 334NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 335NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 336NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 337NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 338NETGRAPH7_BPF opt_netgraph.h 339NETGRAPH7_BRIDGE opt_netgraph.h 340NETGRAPH7_CAR opt_netgraph.h 341NETGRAPH7_CISCO opt_netgraph.h 342NETGRAPH7_DEFLATE opt_netgraph.h 343NETGRAPH7_DEVICE opt_netgraph.h 344NETGRAPH7_ECHO opt_netgraph.h 345NETGRAPH7_EIFACE opt_netgraph.h 346NETGRAPH7_ETHER opt_netgraph.h 347NETGRAPH7_FEC opt_netgraph.h 348NETGRAPH7_FRAME_RELAY opt_netgraph.h 349NETGRAPH7_GIF opt_netgraph.h 350NETGRAPH7_GIF_DEMUX opt_netgraph.h 351NETGRAPH7_HOLE opt_netgraph.h 352NETGRAPH7_IFACE opt_netgraph.h 353NETGRAPH7_IP_INPUT opt_netgraph.h 354NETGRAPH7_IPFW opt_netgraph.h 355NETGRAPH7_KSOCKET opt_netgraph.h 356NETGRAPH7_L2TP opt_netgraph.h 357NETGRAPH7_LMI opt_netgraph.h 358# MPPC compression requires proprietary files (not included) 359NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 360NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 361NETGRAPH7_NAT opt_netgraph.h 362NETGRAPH7_NETFLOW opt_netgraph.h 363NETGRAPH7_ONE2MANY opt_netgraph.h 364NETGRAPH7_PPP opt_netgraph.h 365NETGRAPH7_PPPOE opt_netgraph.h 366NETGRAPH7_PPTPGRE opt_netgraph.h 367NETGRAPH7_PRED1 opt_netgraph.h 368NETGRAPH7_RFC1490 opt_netgraph.h 369NETGRAPH7_SOCKET opt_netgraph.h 370NETGRAPH7_SPLIT opt_netgraph.h 371NETGRAPH7_SPPP opt_netgraph.h 372NETGRAPH7_TAG opt_netgraph.h 373NETGRAPH7_TCPMSS opt_netgraph.h 374NETGRAPH7_TEE opt_netgraph.h 375NETGRAPH7_TTY opt_netgraph.h 376NETGRAPH7_UI opt_netgraph.h 377NETGRAPH7_VJC opt_netgraph.h 378 379# NgATM options 380NGATM7_ATM opt_netgraph.h 381NGATM7_ATMBASE opt_netgraph.h 382NGATM7_SSCOP opt_netgraph.h 383NGATM7_SSCFU opt_netgraph.h 384NGATM7_UNI opt_netgraph.h 385NGATM7_CCATM opt_netgraph.h 386 387# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 388# Each netgraph node type can be either be compiled into the kernel 389# or loaded dynamically. To get the former, include the corresponding 390# option below. Each type has its own man page, e.g. ng_async(8). 391NETGRAPH 392NETGRAPH_ASYNC opt_netgraph.h 393NETGRAPH_BPF opt_netgraph.h 394NETGRAPH_BRIDGE opt_netgraph.h 395NETGRAPH_CISCO opt_netgraph.h 396NETGRAPH_ECHO opt_netgraph.h 397NETGRAPH_EIFACE opt_netgraph.h 398NETGRAPH_ETHER opt_netgraph.h 399NETGRAPH_FRAME_RELAY opt_netgraph.h 400NETGRAPH_HOLE opt_netgraph.h 401NETGRAPH_IFACE opt_netgraph.h 402NETGRAPH_KSOCKET opt_netgraph.h 403NETGRAPH_LMI opt_netgraph.h 404NETGRAPH_L2TP opt_netgraph.h 405# MPPC compression requires proprietary files (not included) 406NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 407NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 408NETGRAPH_ONE2MANY opt_netgraph.h 409NETGRAPH_PPP opt_netgraph.h 410NETGRAPH_PPPOE opt_netgraph.h 411NETGRAPH_PPTPGRE opt_netgraph.h 412NETGRAPH_RFC1490 opt_netgraph.h 413NETGRAPH_SOCKET opt_netgraph.h 414NETGRAPH_TEE opt_netgraph.h 415NETGRAPH_TTY opt_netgraph.h 416NETGRAPH_UI opt_netgraph.h 417NETGRAPH_VJC opt_netgraph.h 418 419# DRM options 420DRM_DEBUG opt_drm.h 421DRM_LINUX opt_drm.h 422 423# ATM (HARP version) 424ATM_CORE opt_atm.h 425ATM_IP opt_atm.h 426ATM_SIGPVC opt_atm.h 427ATM_SPANS opt_atm.h 428ATM_UNI opt_atm.h 429 430# XXX Conflict: # of devices vs network protocol (Native ATM). 431# This makes "atm.h" unusable. 432NATM opt_natm.h 433 434# DPT driver debug flags 435DPT_MEASURE_PERFORMANCE opt_dpt.h 436DPT_HANDLE_TIMEOUTS opt_dpt.h 437DPT_TIMEOUT_FACTOR opt_dpt.h 438DPT_LOST_IRQ opt_dpt.h 439DPT_RESET_HBA opt_dpt.h 440 441# Misc debug flags. Most of these should probably be replaced with 442# 'DEBUG', and then let people recompile just the interesting modules 443# with 'make CC="cc -DDEBUG"'. 444CLUSTERDEBUG opt_debug_cluster.h 445DEBUG_1284 opt_ppb_1284.h 446VP0_DEBUG opt_vpo.h 447LPT_DEBUG opt_lpt.h 448PLIP_DEBUG opt_plip.h 449LOCKF_DEBUG opt_debug_lockf.h 450LOUTB opt_debug_outb.h 451NPX_DEBUG opt_debug_npx.h 452NETATALKDEBUG opt_atalk.h 453SI_DEBUG opt_debug_si.h 454 455# Fb options 456FB_DEBUG opt_fb.h 457FB_INSTALL_CDEV opt_fb.h 458 459# ppbus related options 460PERIPH_1284 opt_ppb_1284.h 461DONTPROBE_1284 opt_ppb_1284.h 462 463# smbus related options 464ENABLE_ALART opt_intpm.h 465 466# These cause changes all over the kernel 467BLKDEV_IOSIZE opt_global.h 468DEBUG opt_global.h 469DEBUG_LOCKS opt_global.h 470DEBUG_CRIT_SECTIONS opt_global.h 471DIAGNOSTIC opt_global.h 472INVARIANTS opt_global.h 473VFS_BIO_DEBUG opt_global.h 474DEBUG_INTERRUPTS opt_global.h 475SOCKBUF_DEBUG opt_global.h 476PANIC_DEBUG opt_global.h 477MBUF_DEBUG opt_global.h 478PMAP_DEBUG opt_global.h 479VM_PAGE_DEBUG opt_global.h 480SLAB_DEBUG opt_global.h 481 482# Sample system/interrupt PC 483DEBUG_PCTRACK opt_pctrack.h 484 485# These are VM related options 486NO_SWAPPING opt_vm.h 487PQ_CACHESIZE opt_vmpage.h 488 489# Standard SMP options 490SMP opt_global.h 491 492# sys/netkey 493KEY 494 495# Size of the kernel message buffer 496MSGBUF_SIZE opt_msgbuf.h 497 498# PCI related options 499COMPAT_OLDPCI 500 501# NFS options 502NFS_MINATTRTIMO opt_nfs.h 503NFS_MAXATTRTIMO opt_nfs.h 504NFS_MINDIRATTRTIMO opt_nfs.h 505NFS_MAXDIRATTRTIMO opt_nfs.h 506NFS_GATHERDELAY opt_nfs.h 507NFS_UIDHASHSIZ opt_nfs.h 508NFS_WDELAYHASHSIZ opt_nfs.h 509NFS_MUIDHASHSIZ opt_nfs.h 510NFS_NOSERVER opt_nfs.h 511NFS_DEBUG opt_nfs.h 512 513# MSDOSFS options 514MSDOSFS_DEBUG opt_msdosfs.h 515 516# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 517BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 518BROOKTREE_ALLOC_PAGES opt_bktr.h 519BKTR_OVERRIDE_CARD opt_bktr.h 520BKTR_OVERRIDE_TUNER opt_bktr.h 521BKTR_OVERRIDE_DBX opt_bktr.h 522BKTR_OVERRIDE_MSP opt_bktr.h 523BKTR_SYSTEM_DEFAULT opt_bktr.h 524BKTR_ALLOC_PAGES opt_bktr.h 525BKTR_USE_PLL opt_bktr.h 526BKTR_GPIO_ACCESS opt_bktr.h 527BKTR_NO_MSP_RESET opt_bktr.h 528BKTR_430_FX_MODE opt_bktr.h 529BKTR_SIS_VIA_MODE opt_bktr.h 530BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 531 532# Various mi ISA bus flags 533COM_ESP opt_sio.h 534COM_MULTIPORT opt_sio.h 535BREAK_TO_DEBUGGER opt_comconsole.h 536ALT_BREAK_TO_DEBUGGER opt_comconsole.h 537 538# options for bus/device framework 539BUS_DEBUG opt_bus.h 540 541# options for USB support 542OHCI_DEBUG opt_usb.h 543USB_DEBUG opt_usb.h 544 545# Vinum options 546VINUMDEBUG opt_vinum.h 547 548# Embedded system options 549UKBD_DFLT_KEYMAP opt_ukbd.h 550INIT_PATH opt_init_path.h 551 552ROOTDEVNAME opt_rootdevname.h 553 554FDC_DEBUG opt_fdc.h 555PCFCLOCK_VERBOSE opt_pcfclock.h 556PCFCLOCK_MAX_RETRIES opt_pcfclock.h 557 558# Polling device handling 559DEVICE_POLLING opt_polling.h 560 561# Network device queue based polling 562IFPOLL_ENABLE opt_ifpoll.h 563 564# options for ubsec driver 565UBSEC_DEBUG opt_ubsec.h 566UBSEC_RNDTEST opt_ubsec.h 567UBSEC_NO_RNG opt_ubsec.h 568 569# options for hifn driver 570HIFN_DEBUG opt_hifn.h 571HIFN_RNDTEST opt_hifn.h 572HIFN_NO_RNG opt_hifn.h 573 574# KTR options 575KTR opt_global.h 576KTR_ALL opt_ktr.h 577KTR_TOKENS opt_ktr.h 578KTR_MEMORY opt_ktr.h 579KTR_USB_MEMORY opt_ktr.h 580KTR_IPIQ opt_ktr.h 581KTR_MSGPORT opt_ktr.h 582KTR_ENTRIES opt_global.h 583KTR_VERBOSE opt_ktr.h 584KTR_SPIN_CONTENTION opt_ktr.h 585KTR_IF_BGE opt_ktr.h 586KTR_IF_EM opt_ktr.h 587KTR_IF_EMX opt_ktr.h 588KTR_KERNENTRY opt_ktr.h 589KTR_TESTLOG opt_ktr.h 590KTR_SERIALIZER opt_ktr.h 591KTR_POLLING opt_ktr.h 592KTR_IFQ opt_ktr.h 593KTR_IF_START opt_ktr.h 594KTR_HAMMER opt_ktr.h 595KTR_ETHERNET opt_ktr.h 596KTR_CTXSW opt_ktr.h 597 598# options for the Atheros driver 599ATH_DEBUG opt_ath.h 600ATH_DIAGAPI opt_ath.h 601ATH_RXBUF opt_ath.h 602ATH_TXBUF opt_ath.h 603 604# ...and its HAL 605AH_SUPPORT_AR5416 opt_ah.h 606 607# bce driver 608BCE_DEBUG opt_bce.h 609BCE_NVRAM_WRITE_SUPPORT opt_bce.h 610 611# ed driver 612ED_NO_MIIBUS opt_ed.h 613 614# emx driver 615EMX_RSS_DEBUG opt_emx.h 616 617# jme driver 618JME_RSS_DEBUG opt_jme.h 619 620# dcons options 621DCONS_BUF_SIZE opt_dcons.h 622DCONS_POLL_HZ opt_dcons.h 623DCONS_FORCE_CONSOLE opt_dcons.h 624DCONS_FORCE_GDB opt_dcons.h 625 626# deprecated drivers and options 627I_WANT_DEPRECATED_STUFF opt_deprecated.h 628 629# SCTP 630SCTP opt_sctp.h 631SCTP_DEBUG opt_sctp.h 632SCTP_USE_ADLER32 opt_sctp.h 633SCTP_HIGH_SPEED opt_sctp.h 634SCTP_STAT_LOGGING opt_sctp.h 635SCTP_CWND_LOGGING opt_sctp.h 636SCTP_BLK_LOGGING opt_sctp.h 637SCTP_STR_LOGGING opt_sctp.h 638SCTP_FR_LOGGING opt_sctp.h 639SCTP_MAP_LOGGING opt_sctp.h 640 641# syslink kernel support 642# 643SYSLINK opt_syslink.h 644 645# DSCHED stuff 646DSCHED_FQ opt_dsched.h 647 648# Receive Side Scaling (now basecode) 649RSS_DEBUG opt_rss.h 650 651# Enable watchdogs 652WATCHDOG_ENABLE opt_cpu.h 653 654# Panic settings 655WDOG_DISABLE_ON_PANIC opt_panic.h 656ERROR_LED_ON_PANIC opt_panic.h 657 658# 802.11 support layer 659IEEE80211_DEBUG opt_wlan.h 660IEEE80211_DEBUG_REFCNT opt_wlan.h 661IEEE80211_AMPDU_AGE opt_wlan.h 662IEEE80211_SUPPORT_MESH opt_wlan.h 663IEEE80211_SUPPORT_SUPERG opt_wlan.h 664IEEE80211_SUPPORT_TDMA opt_wlan.h 665 666# 802.11 TDMA support 667TDMA_SLOTLEN_DEFAULT opt_tdma.h 668TDMA_SLOTCNT_DEFAULT opt_tdma.h 669TDMA_BINTVAL_DEFAULT opt_tdma.h 670TDMA_TXRATE_11B_DEFAULT opt_tdma.h 671TDMA_TXRATE_11G_DEFAULT opt_tdma.h 672TDMA_TXRATE_11A_DEFAULT opt_tdma.h 673TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 674TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 675TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 676TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 677TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 678 679PANIC_REBOOT_WAIT_TIME opt_panic.h 680