xref: /dragonfly/sys/config/X86_64_GENERIC (revision 0ca59c34)
1#
2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64
3#
4# Check the LINT64 configuration file in sys/config, for an
5# exhaustive list of options.
6
7platform	pc64
8machine		x86_64
9machine_arch	x86_64
10cpu		HAMMER_CPU
11ident		X86_64_GENERIC
12maxusers	0
13#options	CPU_DISABLE_AVX
14
15makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
16
17options 	INET			#InterNETworking
18options 	INET6			#IPv6 communications protocols
19options 	HAMMER			#Hammer Filesystem
20options		NULLFS			#NULL filesystem
21options 	FFS			#Berkeley Fast Filesystem
22options 	FFS_ROOT		#FFS usable as root device [keep this!]
23options 	SOFTUPDATES		#Enable FFS soft updates support
24options 	UFS_DIRHASH		#Improve performance on big directories
25options 	MFS			#Memory Filesystem
26options 	TMPFS			#Temporary Filesystem
27options 	MD_ROOT			#MD is a potential root device
28options 	NFS			#Network Filesystem
29options 	NFS_ROOT		#NFS usable as root device, NFS required
30options 	MSDOSFS			#MSDOS Filesystem
31options 	CD9660			#ISO 9660 Filesystem
32options 	PROCFS			#Process filesystem
33#options 	COMPAT_43		#Compatible with BSD 4.3
34options 	SCSI_DELAY=5000		#Delay (in ms) before probing SCSI
35options		IFPOLL_ENABLE		# Support mixed interrupt-polling
36					# handling of network device drivers
37options 	UCONSOLE		#Allow users to grab the console
38options 	KTRACE			#ktrace(1) support
39options 	_KPOSIX_PRIORITY_SCHEDULING
40options 	ICMP_BANDLIM		#Rate limit bad replies
41options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
42options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
43					# output.  Adds ~128k to driver.
44options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
45					# output.  Adds ~215k to driver.
46
47# ALTQ
48options		ALTQ		#alternate queueing
49options		ALTQ_CBQ	#class based queueing
50options		ALTQ_RED	#random early detection
51options		ALTQ_RIO	#triple red for diffserv (needs RED)
52options		ALTQ_HFSC	#hierarchical fair service curve
53options		ALTQ_PRIQ	#priority queue
54options		ALTQ_FAIRQ	#fair queueing
55#options	ALTQ_NOPCC	#don't use processor cycle counter
56#options	ALTQ_DEBUG	#for debugging
57
58# Debugging for Development
59options 	DDB
60options 	DDB_TRACE
61options 	INVARIANTS
62
63device		isa
64device		pci
65
66# AHCI driver, this will override NATA for AHCI devices,
67# both drivers may be included.
68#
69device		ahci
70
71# SiI3124/3132 driver
72#
73device		sili
74
75# NEW-ATA (NATA) and ATAPI devices
76#
77device		nata
78device		natadisk		# ATA disk drives
79device		natapicd		# ATAPI CDROM drives
80device		natapifd		# ATAPI floppy drives
81device		natapist		# ATAPI tape drives
82device		natapicam		# Emulate ATAPI devices as SCSI
83device		nataraid		# support for ATA software RAID
84					# controllers
85options 	ATA_STATIC_ID		# Static device numbering
86
87# SCSI Controllers
88device		ahc		# AHA2940 and onboard AIC7xxx devices
89device		ahd		# AHA39320/29320 and onboard AIC79xx devices
90device		amd		# AMD 53C974 (Tekram DC-390(T))
91device		isp		# Qlogic family
92#device		ispfw		# Firmware for QLogic HBAs- normally a module
93device		mpt		# LSI-Logic MPT/Fusion
94device		mps		# LSI-Logic MPT-Fusion 2
95device		ncr		# NCR/Symbios Logic
96device		sym		# NCR/Symbios Logic (newer chipsets)
97options 	SYM_SETUP_LP_PROBE_MAP=0x40
98				# Allow ncr to attach legacy NCR devices when
99				# both sym and ncr are configured
100
101device		adv0	at isa?
102device		adw
103device		bt
104device		aic
105
106device		ncv		# NCR 53C500
107device		nsp		# Workbit Ninja SCSI-3
108device		stg		# TMC 18C30/18C50
109
110# SCSI peripherals
111device		scbus		# SCSI bus (required)
112device		da		# Direct Access (disks)
113device		sa		# Sequential Access (tape etc)
114device		cd		# CD
115device		pass		# Passthrough device (direct SCSI access)
116device		sg		# Passthrough device (linux scsi generic)
117
118# RAID controllers interfaced to the SCSI subsystem
119device		arcmsr		# Areca SATA II RAID
120device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
121device		ciss		# Compaq SmartRAID 5* series
122device		dpt		# DPT Smartcache - See LINT64 for options!
123device		"hpt27xx"	# Highpoint RocketRAID 27xx series
124device		hptiop		# Highpoint RocketRAID 3xxx series
125device		hptmv		# Highpoint RocketRAID 182x
126device		hptrr		# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
127device		iir		# Intel Integrated RAID
128device		mly		# Mylex AcceleRAID/eXtremeRAID
129device		mrsas		# LSI MegaRAID SAS (Thunderbolt series and up)
130device		twa		# 3ware 9000 series PATA/SATA RAID
131device		tws		# 3ware 9750 series SATA/SAS RAID
132
133# RAID controllers
134device		aac		# Adaptec FSA RAID, Dell PERC2/PERC3
135device		aacp		# SCSI passthrough for aac (requires CAM)
136device		amr		# AMI MegaRAID
137device		amrp		# SCSI Passthrough interface (optional, CAM req.)
138device		ida		# Compaq Smart RAID
139device		ips		# IBM ServeRAID
140device		mlx		# Mylex DAC960 family
141device		mfi		# LSI MegaRAID SAS
142device		mfip		# LSI MegaRAID SAS passthrough, requires CAM
143device		twe		# 3ware Escalade 7000/8000's
144
145# VirtIO support
146device		virtio		# VirtIO core
147device		virtio_blk	# VirtIO disk driver
148device		vtnet		# VirtIO network driver
149device		virtio_pci	# VirtIO transport over PCI bus
150
151# atkbdc0 controls both the keyboard and the PS/2 mouse
152device		atkbdc0	at isa? port IO_KBD
153device		atkbd0	at atkbdc? irq 1
154device		psm0	at atkbdc? irq 12
155
156device		vga0	at isa?
157
158# kbdmux is the keyboard multiplexer
159device		kbdmux
160
161# splash screen/screen saver
162pseudo-device	splash
163
164# syscons is the default console driver, resembling an SCO console
165device		sc0	at isa? flags 0x100
166options 	SC_PIXEL_MODE		# add support for the raster text mode
167
168device		agp		# support several AGP chipsets
169
170# Intel performance-energy bias
171device		perfbias
172# Intel software controlled clock modulation
173device		clockmod
174
175# HW monitoring devices
176#device		aps0	at isa? port 0x1600
177device		lm0	at isa? port 0x290
178device		it0	at isa?	port 0x290
179device		it1	at isa?	port 0xc00
180device		it2	at isa?	port 0xd00
181device		it3	at isa?	port 0x228
182device		wbsio0	at isa? port 0x2e
183device		wbsio1	at isa? port 0x4e
184# Intel Core and newer CPUs on-die digital thermal sensor support
185device		coretemp
186device		dimm		# DIMM information (location, etc.)
187device		coremctl	# support Intel Core and E3 memory controller
188device		ecc		# support AMD8000, Intel E3 and Intel E5 ECC
189				# requires coremctl and dimm.
190device		memtemp		# support Intel Core, E3 and E5 memory thermal
191				# sensor.
192				# requires coremctl and dimm.
193
194# PCCARD (PCMCIA) support
195device		pccard
196device		cardbus
197device		cbb
198
199# Serial (COM) ports
200device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
201device		sio1	at isa? port IO_COM2 irq 3
202device		sio2	at isa? disable port IO_COM3 irq 5
203device		sio3	at isa? disable port IO_COM4 irq 9
204
205# PCI Ethernet NICs.
206device		de		# DEC/Intel DC21x4x (``Tulip'')
207device		txp		# 3Com 3cR990 (``Typhoon'')
208device		vx		# 3Com 3c590, 3c595 (``Vortex'')
209
210device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
211				# Requires ig_hal
212device		igb		# Intel Pro/1000 (82575, 82576, 82580, i350)
213				# Requires ig_hal
214device		ig_hal		# Intel PRO/1000 hardware abstraction layer
215device		ix		# Intel PRO/10GbE PCIE Ethernet Family
216
217device		oce		# Emulex OneConnect 10Gb
218
219# PCI Ethernet NICs that use the common MII bus controller code.
220# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
221device		miibus		# MII bus support
222device		ae		# Attansic/Atheros L2 Fast Ethernet
223device		age		# Attansic/Atheros L1 Gigabit Ethernet
224device		alc		# Atheros AR8131/AR8132
225device		ale		# Atheros AR8121/AR8113/AR8114
226device		bce		# Broadcom NetXtreme II Gigabit Ethernet
227device		bfe		# Broadcom BCM440x 10/100 Ethernet
228device		bnx		# Broadcom NetXtreme 5718/57785 Gigabit Ethernet
229device		dc		# DEC/Intel 21143 and various workalikes
230device		et		# Agere ET1310 10/100/1000 Ethernet
231device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
232device		jme		# JMicron Gigabit/Fast Ethernet
233device		pcn		# AMD Am79C97x PCI 10/100 NICs
234device		rl		# RealTek 8129/8139
235device		re		# RealTek 8139C+/8169
236device		sf		# Adaptec AIC-6915 (``Starfire'')
237device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
238device		sk		# SysKonnect GEnesis, LinkSys EG1023, D-Link
239device		ste		# Sundance ST201 (D-Link DFE-550TX)
240device		tl		# Texas Instruments ThunderLAN
241device		tx		# SMC EtherPower II (83c170 ``EPIC'')
242device		vge		# VIA 612x GigE
243device		vr		# VIA Rhine, Rhine II
244device		wb		# Winbond W89C840F
245device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
246device		bge		# Broadcom BCM570x (``Tigon III'')
247device		stge		# Sundance/Tamarack TC9021 Gigabit Ethernet
248device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
249device		nfe		# NVIDIA nForce MCP 10/100/Gigabit Ethernet
250device		ex
251device		xe		# Xircom Ethernet
252
253# Wireless NIC cards
254options 	IEEE80211_DEBUG		#enable debugging msgs
255options 	IEEE80211_SUPPORT_MESH	#enable 802.11s D3.0 support
256options 	IEEE80211_SUPPORT_TDMA	#enable TDMA support
257device		wlan		# 802.11 support
258device		wlan_ccmp	# 802.11 CCMP support
259device		wlan_tkip	# 802.11 TKIP support
260device		wlan_wep	# 802.11 WEP support
261#device		wlan_amrr	# AMRR
262
263# Aironet 4500/4800 802.11 wireless NICs.  Note: the declaration below will
264# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
265# mode (the factory default). If you set the switches on your ISA
266# card for a manually chosen I/O address and IRQ, you must specify
267# those parameters here.
268device		an
269device		ath		# Atheros NICs
270device		ath_hal		# Atheros Hardware Access Layer
271options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
272device		ath_rate_sample	# Atheros Sample TX rate control algorithm
273device		siba_bwn	# Sonic Inc. Silicon Backplane needed for bwn
274device		bwn		# Broadcom BCM43xx NICs using v4 firmware
275device		ral		# Ralink Technology 802.11 wireless NIC
276device		iwn		# Intel IEEE 802.11n wireless network driver
277#device		rtw		# RealTek 802.11 wireless NIC
278device		wpi		# Intel 3945ABG Wireless LAN IEEE 802.11 driver
279# WaveLAN/IEEE 802.11 wireless NICs.  Note: the WaveLAN/IEEE really
280# exists only as a PCMCIA device, so there is no ISA attachment needed
281# and resources will always be dynamically assigned by the pccard code.
282device		wi
283
284device		lnc0	at isa? disable port 0x280 irq 10 drq 0
285device		cs0	at isa? disable port 0x300
286device		sn0	at isa? disable port 0x300 irq 10
287
288# Pseudo devices - the number indicates how many units to allocate.
289pseudo-device	loop		# Network loopback
290pseudo-device	ether		# Ethernet support
291pseudo-device	sl	1	# Kernel SLIP
292pseudo-device	ppp	1	# Kernel PPP
293pseudo-device	tun		# Packet tunnel.
294pseudo-device	pty		# Pseudo-ttys (telnet etc)
295pseudo-device	md		# Memory "disks"
296pseudo-device	vn		# File image "disks"
297pseudo-device	gif		# IPv6 and IPv4 tunneling
298pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)
299pseudo-device   lagg
300
301# CARP support
302options		CARP
303pseudo-device	carp
304
305# The `bpf' pseudo-device enables the Berkeley Packet Filter.
306# Be aware of the administrative consequences of enabling this!
307pseudo-device	bpf		#Berkeley packet filter
308
309device		crypto		# core crypto support, used by wlan
310device		cryptodev	# /dev/crypto for access to h/w
311
312# USB support
313#
314device		usb		# USB Bus (required)
315device		uhci		# UHCI PCI->USB interface
316device		ohci		# OHCI PCI->USB interface
317device		uhid		# "Human Interface Devices"
318device		ukbd		# Keyboard
319device		ulpt		# Printer
320device		umass		# Disks/Mass storage - Requires scbus and da
321device		ums		# Mouse
322# USB Ethernet, requires mii
323device		axe		# ASIX Electronics USB Ethernet
324device		aue		# ADMtek USB ethernet
325device		cue		# CATC USB ethernet
326device		kue		# Kawasaki LSI USB ethernet
327# USB wireless NICs, requires wlan, wlan_amrr
328#device		rum		# Ralink Technology RT2501USB/RT2601USB
329
330# FireWire support
331device		firewire	# FireWire bus code
332device		sbp		# SCSI over FireWire (Requires scbus and da)
333device		fwe		# Ethernet over FireWire (non-standard!)
334
335# MMC/SD
336device		mmc
337device		mmcsd
338device		sdhci
339
340# RNG
341#
342device          aesni           # hardware crypto/RNG for AES-NI
343device          padlock         # hardware crypto/RNG for VIA C3/C7/Eden
344device          rdrand          # hardware RNG for RdRand
345