1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13 14makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 15 16options INET #InterNETworking 17options INET6 #IPv6 communications protocols 18options HAMMER #Hammer Filesystem 19options NULLFS #NULL filesystem 20options FFS #Berkeley Fast Filesystem 21options FFS_ROOT #FFS usable as root device [keep this!] 22options SOFTUPDATES #Enable FFS soft updates support 23options UFS_DIRHASH #Improve performance on big directories 24options MFS #Memory Filesystem 25options TMPFS #Temporary Filesystem 26options MD_ROOT #MD is a potential root device 27options NFS #Network Filesystem 28options NFS_ROOT #NFS usable as root device, NFS required 29options MSDOSFS #MSDOS Filesystem 30options CD9660 #ISO 9660 Filesystem 31options PROCFS #Process filesystem 32#options COMPAT_43 #Compatible with BSD 4.3 33options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 34options DEVICE_POLLING # Support mixed interrupt-polling 35 # handling of network device drivers 36options UCONSOLE #Allow users to grab the console 37options KTRACE #ktrace(1) support 38options SYSVSHM #SYSV-style shared memory 39options SYSVMSG #SYSV-style message queues 40options SYSVSEM #SYSV-style semaphores 41options P1003_1B #Posix P1003_1B real-time extensions 42options _KPOSIX_PRIORITY_SCHEDULING 43options ICMP_BANDLIM #Rate limit bad replies 44options KBD_INSTALL_CDEV # install a CDEV entry in /dev 45options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 46 # output. Adds ~128k to driver. 47options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 48 # output. Adds ~215k to driver. 49options DSCHED_FQ # Fair-queuing disk scheduler 50 51# ALTQ 52options ALTQ #alternate queueing 53options ALTQ_CBQ #class based queueing 54options ALTQ_RED #random early detection 55options ALTQ_RIO #triple red for diffserv (needs RED) 56options ALTQ_HFSC #hierarchical fair service curve 57options ALTQ_PRIQ #priority queue 58options ALTQ_FAIRQ #fair queueing 59#options ALTQ_NOPCC #don't use processor cycle counter 60#options ALTQ_DEBUG #for debugging 61 62 63# Kernels configured with 'options SMP' should generally boot on both 64# SMP and UP boxes. 65# 66options SMP # Symmetric MultiProcessor Kernel 67 68# Debugging for Development 69options DDB 70options DDB_TRACE 71options INVARIANTS 72 73device isa 74device pci 75 76# AHCI driver, this will override NATA for AHCI devices, 77# both drivers may be included. 78# 79device ahci 80 81# SiI3124/3132 driver 82# 83device sili 84 85# NEW-ATA (NATA) and ATAPI devices 86# 87device nata 88device natadisk # ATA disk drives 89device natapicd # ATAPI CDROM drives 90device natapifd # ATAPI floppy drives 91device natapist # ATAPI tape drives 92device natapicam # Emulate ATAPI devices as SCSI 93device nataraid # support for ATA software RAID 94 # controllers 95device natausb # ATA-over-USB support 96options ATA_STATIC_ID # Static device numbering 97 98# LEGACY ATA and ATAPI devices 99#device ata0 at isa? port IO_WD1 irq 14 100#device ata1 at isa? port IO_WD2 irq 15 101#device ata 102#device atadisk # ATA disk drives 103#device atapicd # ATAPI CDROM drives 104#device atapifd # ATAPI floppy drives 105#device atapist # ATAPI tape drives 106#device atapicam # Emulate ATAPI devices as SCSI via CAM 107#options ATA_STATIC_ID #Static device numbering 108 109# SCSI Controllers 110device ahc # AHA2940 and onboard AIC7xxx devices 111device ahd # AHA39320/29320 and onboard AIC79xx devices 112device amd # AMD 53C974 (Tekram DC-390(T)) 113device isp # Qlogic family 114#device ispfw # Firmware for QLogic HBAs- normally a module 115device mpt # LSI-Logic MPT/Fusion 116device ncr # NCR/Symbios Logic 117device sym # NCR/Symbios Logic (newer chipsets) 118options SYM_SETUP_LP_PROBE_MAP=0x40 119 # Allow ncr to attach legacy NCR devices when 120 # both sym and ncr are configured 121 122device adv0 at isa? 123device adw 124device bt0 at isa? 125device aic0 at isa? 126 127device ncv # NCR 53C500 128device nsp # Workbit Ninja SCSI-3 129device stg # TMC 18C30/18C50 130 131# SCSI peripherals 132device scbus # SCSI bus (required) 133device da # Direct Access (disks) 134device sa # Sequential Access (tape etc) 135device cd # CD 136device pass # Passthrough device (direct SCSI access) 137device sg # Passthrough device (linux scsi generic) 138 139# RAID controllers interfaced to the SCSI subsystem 140device arcmsr # Areca SATA II RAID 141device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 142device ciss # Compaq SmartRAID 5* series 143device dpt # DPT Smartcache - See LINT for options! 144device hptiop # Highpoint RocketRaid 3xxx series 145device hptmv # Highpoint RocketRAID 182x 146device iir # Intel Integrated RAID 147device mly # Mylex AcceleRAID/eXtremeRAID 148device twa # 3ware 9000 series PATA/SATA RAID 149device tws # 3ware 9750 series SATA/SAS RAID 150 151# RAID controllers 152device aac # Adaptec FSA RAID, Dell PERC2/PERC3 153device aacp # SCSI passthrough for aac (requires CAM) 154device amr # AMI MegaRAID 155device amrp # SCSI Passthrough interface (optional, CAM req.) 156device ida # Compaq Smart RAID 157device ips # IBM ServeRAID 158device mlx # Mylex DAC960 family 159device mfi # LSI MegaRAID SAS 160device mfip # LSI MegaRAID SAS passthrough, requires CAM 161device twe # 3ware Escalade 7000/8000's 162 163# atkbdc0 controls both the keyboard and the PS/2 mouse 164device atkbdc0 at isa? port IO_KBD 165device atkbd0 at atkbdc? irq 1 flags 0x1 166device psm0 at atkbdc? irq 12 167 168device vga0 at isa? 169 170# kbdmux is the keyboard multiplexer 171device kbdmux 172 173# splash screen/screen saver 174pseudo-device splash 175 176# syscons is the default console driver, resembling an SCO console 177device sc0 at isa? flags 0x100 178options SC_PIXEL_MODE # add support for the raster text mode 179 180device agp # support several AGP chipsets 181 182# HW monitoring devices 183#device aps0 at isa? port 0x1600 184device lm0 at isa? port 0x290 185device it0 at isa? port 0x290 186device it1 at isa? port 0xc00 187device it2 at isa? port 0xd00 188device it3 at isa? port 0x228 189device wbsio0 at isa? port 0x2e 190device wbsio1 at isa? port 0x4e 191device lm#3 at wbsio? 192 193# PCCARD (PCMCIA) support 194device pccard 195device cardbus 196device cbb 197 198# Serial (COM) ports 199device sio0 at isa? port IO_COM1 flags 0x10 irq 4 200device sio1 at isa? port IO_COM2 irq 3 201device sio2 at isa? disable port IO_COM3 irq 5 202device sio3 at isa? disable port IO_COM4 irq 9 203 204# Parallel port 205device ppc0 at isa? irq 7 206device ppbus # Parallel port bus (required) 207device lpt # Printer 208device plip # TCP/IP over parallel 209device ppi # Parallel port interface device 210#device vpo # Requires scbus and da 211 212 213# PCI Ethernet NICs. 214device de # DEC/Intel DC21x4x (``Tulip'') 215device txp # 3Com 3cR990 (``Typhoon'') 216device vx # 3Com 3c590, 3c595 (``Vortex'') 217 218device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 219 # Requires ig_hal 220device ig_hal # Intel PRO/1000 hardware abstraction layer 221 222# PCI Ethernet NICs that use the common MII bus controller code. 223# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 224device miibus # MII bus support 225device ae # Attansic/Atheros L2 Fast Ethernet 226device age # Attansic/Atheros L1 Gigabit Ethernet 227device alc # Atheros AR8131/AR8132 228device ale # Atheros AR8121/AR8113/AR8114 229device bce # Broadcom NetXtreme II Gigabit Ethernet 230device bfe # Broadcom BCM440x 10/100 Ethernet 231device dc # DEC/Intel 21143 and various workalikes 232device et # Agere ET1310 10/100/1000 Ethernet 233device fxp # Intel EtherExpress PRO/100B (82557, 82558) 234device jme # JMicron Gigabit/Fast Ethernet 235device pcn # AMD Am79C97x PCI 10/100 NICs 236device rl # RealTek 8129/8139 237device re # RealTek 8139C+/8169 238device sf # Adaptec AIC-6915 (``Starfire'') 239device sis # Silicon Integrated Systems SiS 900/SiS 7016 240device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 241device ste # Sundance ST201 (D-Link DFE-550TX) 242device tl # Texas Instruments ThunderLAN 243device tx # SMC EtherPower II (83c170 ``EPIC'') 244device vge # VIA 612x GigE 245device vr # VIA Rhine, Rhine II 246device wb # Winbond W89C840F 247device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 248device bge # Broadcom BCM570x (``Tigon III'') 249device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 250device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 251device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 252 253# ISA Ethernet NICs. 254# 'device ed' requires 'device miibus' 255device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 256device ex 257# Xircom Ethernet 258device xe 259 260# Wireless NIC cards 261options IEEE80211_DEBUG #enable debugging msgs 262options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 263options IEEE80211_SUPPORT_TDMA #enable TDMA support 264device wlan # 802.11 support 265device wlan_ccmp # 802.11 CCMP support 266device wlan_tkip # 802.11 TKIP support 267device wlan_wep # 802.11 WEP support 268#device wlan_amrr # AMRR 269 270# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 271# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 272# mode (the factory default). If you set the switches on your ISA 273# card for a manually chosen I/O address and IRQ, you must specify 274# those parameters here. 275device an 276device ral # Ralink Technology 802.11 wireless NIC 277#device rtw # RealTek 802.11 wireless NIC 278# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 279# exists only as a PCMCIA device, so there is no ISA attachment needed 280# and resources will always be dynamically assigned by the pccard code. 281device wi 282 283# The probe order of these is presently determined by i386/isa/isa_compat.c. 284device lnc0 at isa? disable port 0x280 irq 10 drq 0 285device cs0 at isa? disable port 0x300 286device sn0 at isa? disable port 0x300 irq 10 287 288# Pseudo devices - the number indicates how many units to allocate. 289pseudo-device loop # Network loopback 290pseudo-device ether # Ethernet support 291pseudo-device sl 1 # Kernel SLIP 292pseudo-device ppp 1 # Kernel PPP 293pseudo-device tun # Packet tunnel. 294pseudo-device pty # Pseudo-ttys (telnet etc) 295pseudo-device md # Memory "disks" 296pseudo-device gif # IPv6 and IPv4 tunneling 297pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 298 299# The `bpf' pseudo-device enables the Berkeley Packet Filter. 300# Be aware of the administrative consequences of enabling this! 301pseudo-device bpf #Berkeley packet filter 302 303pseudo-device crypto # core crypto support, used by wlan 304 305# USB support 306device uhci # UHCI PCI->USB interface 307device ohci # OHCI PCI->USB interface 308device usb # USB Bus (required) 309device ugen # Generic 310device uhid # "Human Interface Devices" 311device ukbd # Keyboard 312device ulpt # Printer 313device umass # Disks/Mass storage - Requires scbus and da 314device ums # Mouse 315device uscanner # Scanners 316device urio # Diamond Rio MP3 Player 317# USB Ethernet, requires mii 318device aue # ADMtek USB ethernet 319device axe # ASIX Electronics USB Ethernet 320device cue # CATC USB ethernet 321device kue # Kawasaki LSI USB ethernet 322device rue # RealTek 8150 based USB ethernet 323# USB wireless NICs, requires wlan, wlan_amrr 324#device rum # Ralink Technology RT2501USB/RT2601USB 325#device ural # Ralink Technology RT2500USB 326 327# FireWire support 328device firewire # FireWire bus code 329device sbp # SCSI over FireWire (Requires scbus and da) 330device fwe # Ethernet over FireWire (non-standard!) 331 332# MMC/SD 333device mmc 334device mmcsd 335device sdhci 336