1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13#options CPU_DISABLE_AVX 14 15makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 16 17options INET #InterNETworking 18options INET6 #IPv6 communications protocols 19options HAMMER #Hammer Filesystem 20options NULLFS #NULL filesystem 21options FFS #Berkeley Fast Filesystem 22options FFS_ROOT #FFS usable as root device [keep this!] 23options SOFTUPDATES #Enable FFS soft updates support 24options UFS_DIRHASH #Improve performance on big directories 25options MFS #Memory Filesystem 26options TMPFS #Temporary Filesystem 27options MD_ROOT #MD is a potential root device 28options NFS #Network Filesystem 29options NFS_ROOT #NFS usable as root device, NFS required 30options MSDOSFS #MSDOS Filesystem 31options CD9660 #ISO 9660 Filesystem 32options PROCFS #Process filesystem 33#options COMPAT_43 #Compatible with BSD 4.3 34options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 35options IFPOLL_ENABLE # Support mixed interrupt-polling 36 # handling of network device drivers 37options UCONSOLE #Allow users to grab the console 38options KTRACE #ktrace(1) support 39options SYSVSHM #SYSV-style shared memory 40options SYSVMSG #SYSV-style message queues 41options SYSVSEM #SYSV-style semaphores 42options P1003_1B #Posix P1003_1B real-time extensions 43options _KPOSIX_PRIORITY_SCHEDULING 44options ICMP_BANDLIM #Rate limit bad replies 45options KBD_INSTALL_CDEV # install a CDEV entry in /dev 46options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 47 # output. Adds ~128k to driver. 48options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 49 # output. Adds ~215k to driver. 50options DSCHED_FQ # Fair-queuing disk scheduler 51 52# ALTQ 53options ALTQ #alternate queueing 54options ALTQ_CBQ #class based queueing 55options ALTQ_RED #random early detection 56options ALTQ_RIO #triple red for diffserv (needs RED) 57options ALTQ_HFSC #hierarchical fair service curve 58options ALTQ_PRIQ #priority queue 59options ALTQ_FAIRQ #fair queueing 60#options ALTQ_NOPCC #don't use processor cycle counter 61#options ALTQ_DEBUG #for debugging 62 63# Debugging for Development 64options DDB 65options DDB_TRACE 66options INVARIANTS 67 68#options ACPI_DEBUG 69 70device isa 71device pci 72 73# AHCI driver, this will override NATA for AHCI devices, 74# both drivers may be included. 75# 76device ahci 77 78# SiI3124/3132 driver 79# 80device sili 81 82# NEW-ATA (NATA) and ATAPI devices 83# 84device nata 85device natadisk # ATA disk drives 86device natapicd # ATAPI CDROM drives 87device natapifd # ATAPI floppy drives 88device natapist # ATAPI tape drives 89device natapicam # Emulate ATAPI devices as SCSI 90device nataraid # support for ATA software RAID 91 # controllers 92device natausb # ATA-over-USB support 93options ATA_STATIC_ID # Static device numbering 94 95# SCSI Controllers 96device ahc # AHA2940 and onboard AIC7xxx devices 97device ahd # AHA39320/29320 and onboard AIC79xx devices 98device amd # AMD 53C974 (Tekram DC-390(T)) 99device isp # Qlogic family 100#device ispfw # Firmware for QLogic HBAs- normally a module 101device mpt # LSI-Logic MPT/Fusion 102device mps # LSI-Logic MPT-Fusion 2 103device ncr # NCR/Symbios Logic 104device sym # NCR/Symbios Logic (newer chipsets) 105options SYM_SETUP_LP_PROBE_MAP=0x40 106 # Allow ncr to attach legacy NCR devices when 107 # both sym and ncr are configured 108 109device adv0 at isa? 110device adw 111device bt 112device aic 113 114device ncv # NCR 53C500 115device nsp # Workbit Ninja SCSI-3 116device stg # TMC 18C30/18C50 117 118# SCSI peripherals 119device scbus # SCSI bus (required) 120device da # Direct Access (disks) 121device sa # Sequential Access (tape etc) 122device cd # CD 123device pass # Passthrough device (direct SCSI access) 124device sg # Passthrough device (linux scsi generic) 125 126# RAID controllers interfaced to the SCSI subsystem 127device arcmsr # Areca SATA II RAID 128device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 129device ciss # Compaq SmartRAID 5* series 130device dpt # DPT Smartcache - See LINT for options! 131device "hpt27xx" # Highpoint RocketRAID 27xx series 132device hptiop # Highpoint RocketRAID 3xxx series 133device hptmv # Highpoint RocketRAID 182x 134device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx 135device iir # Intel Integrated RAID 136device mly # Mylex AcceleRAID/eXtremeRAID 137device twa # 3ware 9000 series PATA/SATA RAID 138device tws # 3ware 9750 series SATA/SAS RAID 139 140# RAID controllers 141device aac # Adaptec FSA RAID, Dell PERC2/PERC3 142device aacp # SCSI passthrough for aac (requires CAM) 143device amr # AMI MegaRAID 144device amrp # SCSI Passthrough interface (optional, CAM req.) 145device ida # Compaq Smart RAID 146device ips # IBM ServeRAID 147device mlx # Mylex DAC960 family 148device mfi # LSI MegaRAID SAS 149device mfip # LSI MegaRAID SAS passthrough, requires CAM 150device twe # 3ware Escalade 7000/8000's 151 152# VirtIO support 153device virtio # VirtIO core 154device virtio_blk # VirtIO disk driver 155device virtio_pci # VirtIO transport over PCI bus 156 157# atkbdc0 controls both the keyboard and the PS/2 mouse 158device atkbdc0 at isa? port IO_KBD 159device atkbd0 at atkbdc? irq 1 flags 0x1 160device psm0 at atkbdc? irq 12 161 162device vga0 at isa? 163 164# kbdmux is the keyboard multiplexer 165device kbdmux 166 167# splash screen/screen saver 168pseudo-device splash 169 170# syscons is the default console driver, resembling an SCO console 171device sc0 at isa? flags 0x100 172options SC_PIXEL_MODE # add support for the raster text mode 173 174device agp # support several AGP chipsets 175 176# HW monitoring devices 177#device aps0 at isa? port 0x1600 178device lm0 at isa? port 0x290 179device it0 at isa? port 0x290 180device it1 at isa? port 0xc00 181device it2 at isa? port 0xd00 182device it3 at isa? port 0x228 183device wbsio0 at isa? port 0x2e 184device wbsio1 at isa? port 0x4e 185device lm#3 at wbsio? 186 187# PCCARD (PCMCIA) support 188device pccard 189device cardbus 190device cbb 191 192# Serial (COM) ports 193device sio0 at isa? port IO_COM1 flags 0x10 irq 4 194device sio1 at isa? port IO_COM2 irq 3 195device sio2 at isa? disable port IO_COM3 irq 5 196device sio3 at isa? disable port IO_COM4 irq 9 197 198# Parallel port 199device ppc0 at isa? irq 7 200device ppbus # Parallel port bus (required) 201device lpt # Printer 202device plip # TCP/IP over parallel 203device ppi # Parallel port interface device 204#device vpo # Requires scbus and da 205 206 207# PCI Ethernet NICs. 208device de # DEC/Intel DC21x4x (``Tulip'') 209device txp # 3Com 3cR990 (``Typhoon'') 210device vx # 3Com 3c590, 3c595 (``Vortex'') 211 212device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 213 # Requires ig_hal 214device igb # Intel Pro/1000 (82575, 82576, 82580, i350) 215 # Requires ig_hal 216device ig_hal # Intel PRO/1000 hardware abstraction layer 217device ixgbe # Intel PRO/10GbE PCIE Ethernet Family 218 219# PCI Ethernet NICs that use the common MII bus controller code. 220# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 221device miibus # MII bus support 222device ae # Attansic/Atheros L2 Fast Ethernet 223device age # Attansic/Atheros L1 Gigabit Ethernet 224device alc # Atheros AR8131/AR8132 225device ale # Atheros AR8121/AR8113/AR8114 226device bce # Broadcom NetXtreme II Gigabit Ethernet 227device bfe # Broadcom BCM440x 10/100 Ethernet 228device bnx # Broadcom NetXtreme 5718/57785 Gigabit Ethernet 229device dc # DEC/Intel 21143 and various workalikes 230device et # Agere ET1310 10/100/1000 Ethernet 231device fxp # Intel EtherExpress PRO/100B (82557, 82558) 232device jme # JMicron Gigabit/Fast Ethernet 233device pcn # AMD Am79C97x PCI 10/100 NICs 234device rl # RealTek 8129/8139 235device re # RealTek 8139C+/8169 236device sf # Adaptec AIC-6915 (``Starfire'') 237device sis # Silicon Integrated Systems SiS 900/SiS 7016 238device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 239device ste # Sundance ST201 (D-Link DFE-550TX) 240device tl # Texas Instruments ThunderLAN 241device tx # SMC EtherPower II (83c170 ``EPIC'') 242device vge # VIA 612x GigE 243device vr # VIA Rhine, Rhine II 244device wb # Winbond W89C840F 245device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 246device bge # Broadcom BCM570x (``Tigon III'') 247device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 248device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 249device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 250 251# ISA Ethernet NICs. 252# 'device ed' requires 'device miibus' 253device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 254device ex 255# Xircom Ethernet 256device xe 257 258# Wireless NIC cards 259options IEEE80211_DEBUG #enable debugging msgs 260options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 261options IEEE80211_SUPPORT_TDMA #enable TDMA support 262device wlan # 802.11 support 263device wlan_ccmp # 802.11 CCMP support 264device wlan_tkip # 802.11 TKIP support 265device wlan_wep # 802.11 WEP support 266#device wlan_amrr # AMRR 267 268# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 269# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 270# mode (the factory default). If you set the switches on your ISA 271# card for a manually chosen I/O address and IRQ, you must specify 272# those parameters here. 273device an 274device ral # Ralink Technology 802.11 wireless NIC 275#device rtw # RealTek 802.11 wireless NIC 276# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 277# exists only as a PCMCIA device, so there is no ISA attachment needed 278# and resources will always be dynamically assigned by the pccard code. 279device wi 280 281device lnc0 at isa? disable port 0x280 irq 10 drq 0 282device cs0 at isa? disable port 0x300 283device sn0 at isa? disable port 0x300 irq 10 284 285# Pseudo devices - the number indicates how many units to allocate. 286pseudo-device loop # Network loopback 287pseudo-device ether # Ethernet support 288pseudo-device sl 1 # Kernel SLIP 289pseudo-device ppp 1 # Kernel PPP 290pseudo-device tun # Packet tunnel. 291pseudo-device pty # Pseudo-ttys (telnet etc) 292pseudo-device md # Memory "disks" 293pseudo-device gif # IPv6 and IPv4 tunneling 294pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 295 296# CARP support 297options CARP 298pseudo-device carp 299 300# The `bpf' pseudo-device enables the Berkeley Packet Filter. 301# Be aware of the administrative consequences of enabling this! 302pseudo-device bpf #Berkeley packet filter 303 304pseudo-device crypto # core crypto support, used by wlan 305 306# USB support 307device uhci # UHCI PCI->USB interface 308device ohci # OHCI PCI->USB interface 309device usb # USB Bus (required) 310#device "usb4bsd" # use this instead of usb for the new stack 311device ugen # Generic 312device uhid # "Human Interface Devices" 313device ukbd # Keyboard 314device ulpt # Printer 315device umass # Disks/Mass storage - Requires scbus and da 316device ums # Mouse 317device uscanner # Scanners 318device urio # Diamond Rio MP3 Player 319# USB Ethernet, requires mii 320device aue # ADMtek USB ethernet 321device axe # ASIX Electronics USB Ethernet 322device cue # CATC USB ethernet 323device kue # Kawasaki LSI USB ethernet 324device rue # RealTek 8150 based USB ethernet 325# USB wireless NICs, requires wlan, wlan_amrr 326#device rum # Ralink Technology RT2501USB/RT2601USB 327#device ural # Ralink Technology RT2500USB 328 329# FireWire support 330device firewire # FireWire bus code 331device sbp # SCSI over FireWire (Requires scbus and da) 332device fwe # Ethernet over FireWire (non-standard!) 333 334# MMC/SD 335device mmc 336device mmcsd 337device sdhci 338