1# 2# X86_64_GENERIC -- Generic kernel configuration file for DragonFly/x86_64 3# 4# Check the LINT configuration file in sys/config, for an 5# exhaustive list of options. 6 7platform pc64 8machine x86_64 9machine_arch x86_64 10cpu HAMMER_CPU 11ident X86_64_GENERIC 12maxusers 0 13 14makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols 15 16options INET #InterNETworking 17options INET6 #IPv6 communications protocols 18options HAMMER #Hammer Filesystem 19options NULLFS #NULL filesystem 20options FFS #Berkeley Fast Filesystem 21options FFS_ROOT #FFS usable as root device [keep this!] 22options SOFTUPDATES #Enable FFS soft updates support 23options UFS_DIRHASH #Improve performance on big directories 24options MFS #Memory Filesystem 25options TMPFS #Temporary Filesystem 26options MD_ROOT #MD is a potential root device 27options NFS #Network Filesystem 28options NFS_ROOT #NFS usable as root device, NFS required 29options MSDOSFS #MSDOS Filesystem 30options CD9660 #ISO 9660 Filesystem 31options PROCFS #Process filesystem 32options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] 33options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI 34options DEVICE_POLLING # Support mixed interrupt-polling 35 # handling of network device drivers 36options UCONSOLE #Allow users to grab the console 37options KTRACE #ktrace(1) support 38options SYSVSHM #SYSV-style shared memory 39options SYSVMSG #SYSV-style message queues 40options SYSVSEM #SYSV-style semaphores 41options P1003_1B #Posix P1003_1B real-time extensions 42options _KPOSIX_PRIORITY_SCHEDULING 43options ICMP_BANDLIM #Rate limit bad replies 44options KBD_INSTALL_CDEV # install a CDEV entry in /dev 45options AHC_REG_PRETTY_PRINT # Print register bitfields in debug 46 # output. Adds ~128k to driver. 47options AHD_REG_PRETTY_PRINT # Print register bitfields in debug 48 # output. Adds ~215k to driver. 49options DSCHED_FQ # Fair-queuing disk scheduler 50 51# ALTQ 52options ALTQ #alternate queueing 53options ALTQ_CBQ #class based queueing 54options ALTQ_RED #random early detection 55options ALTQ_RIO #triple red for diffserv (needs RED) 56options ALTQ_HFSC #hierarchical fair service curve 57options ALTQ_PRIQ #priority queue 58options ALTQ_FAIRQ #fair queueing 59#options ALTQ_NOPCC #don't use processor cycle counter 60#options ALTQ_DEBUG #for debugging 61 62 63# SMP boxes should normally be build with SMP and APIC_IO. If SMP has 64# interrupt routing problems in APIC_IO you can disable it with the 65# hw.apic_io_enable=0 tunable or by building without the APIC_IO option. 66# 67# 68#options SMP # Symmetric MultiProcessor Kernel 69#options APIC_IO # hw.apic_io_enable = 1 by default 70 71# Debugging for Development 72options DDB 73options DDB_TRACE 74options INVARIANTS 75 76device isa 77device pci 78 79# AHCI driver, this will override NATA for AHCI devices, 80# both drivers may be included. 81# 82device ahci 83 84# SiI3124/3132 driver 85# 86device sili 87 88# NEW-ATA (NATA) and ATAPI devices 89# 90device nata 91device natadisk # ATA disk drives 92device natapicd # ATAPI CDROM drives 93device natapifd # ATAPI floppy drives 94device natapist # ATAPI tape drives 95device natapicam # Emulate ATAPI devices as SCSI 96device nataraid # support for ATA software RAID 97 # controllers 98device natausb # ATA-over-USB support 99options ATA_STATIC_ID # Static device numbering 100 101# LEGACY ATA and ATAPI devices 102#device ata0 at isa? port IO_WD1 irq 14 103#device ata1 at isa? port IO_WD2 irq 15 104#device ata 105#device atadisk # ATA disk drives 106#device atapicd # ATAPI CDROM drives 107#device atapifd # ATAPI floppy drives 108#device atapist # ATAPI tape drives 109#device atapicam # Emulate ATAPI devices as SCSI via CAM 110#options ATA_STATIC_ID #Static device numbering 111 112# SCSI Controllers 113device ahc # AHA2940 and onboard AIC7xxx devices 114device ahd # AHA39320/29320 and onboard AIC79xx devices 115device amd # AMD 53C974 (Tekram DC-390(T)) 116device isp # Qlogic family 117device mpt # LSI-Logic MPT/Fusion 118device ncr # NCR/Symbios Logic 119device sym # NCR/Symbios Logic (newer chipsets) 120options SYM_SETUP_LP_PROBE_MAP=0x40 121 # Allow ncr to attach legacy NCR devices when 122 # both sym and ncr are configured 123 124device adv0 at isa? 125device adw 126device bt0 at isa? 127device aha0 at isa? 128device aic0 at isa? 129 130device ncv # NCR 53C500 131device nsp # Workbit Ninja SCSI-3 132device stg # TMC 18C30/18C50 133 134# SCSI peripherals 135device scbus # SCSI bus (required) 136device da # Direct Access (disks) 137device sa # Sequential Access (tape etc) 138device cd # CD 139device pass # Passthrough device (direct SCSI access) 140device sg # Passthrough device (linux scsi generic) 141 142# RAID controllers interfaced to the SCSI subsystem 143device arcmsr # Areca SATA II RAID 144device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID 145device ciss # Compaq SmartRAID 5* series 146device dpt # DPT Smartcache - See LINT for options! 147device hptiop # Highpoint RocketRaid 3xxx series 148device hptmv # Highpoint RocketRAID 182x 149device iir # Intel Integrated RAID 150device mly # Mylex AcceleRAID/eXtremeRAID 151device twa # 3ware 9000 series PATA/SATA RAID 152device tws # 3ware 9750 series SATA/SAS RAID 153 154# RAID controllers 155device aac # Adaptec FSA RAID, Dell PERC2/PERC3 156device aacp # SCSI passthrough for aac (requires CAM) 157device amr # AMI MegaRAID 158device amrp # SCSI Passthrough interface (optional, CAM req.) 159device ida # Compaq Smart RAID 160device ips # IBM ServeRAID 161device mlx # Mylex DAC960 family 162device mfi # LSI MegaRAID SAS 163device mfip # LSI MegaRAID SAS passthrough, requires CAM 164device twe # 3ware Escalade 7000/8000's 165 166# atkbdc0 controls both the keyboard and the PS/2 mouse 167device atkbdc0 at isa? port IO_KBD 168device atkbd0 at atkbdc? irq 1 flags 0x1 169device psm0 at atkbdc? irq 12 170 171device vga0 at isa? 172 173# kbdmux is the keyboard multiplexer 174device kbdmux 175 176# splash screen/screen saver 177pseudo-device splash 178 179# syscons is the default console driver, resembling an SCO console 180device sc0 at isa? flags 0x100 181options SC_PIXEL_MODE # add support for the raster text mode 182 183device agp # support several AGP chipsets 184 185# HW monitoring devices 186device aps0 at isa? port 0x1600 187device lm0 at isa? port 0x290 188device it0 at isa? port 0x290 189device it1 at isa? port 0xc00 190device it2 at isa? port 0xd00 191device it3 at isa? port 0x228 192device wbsio0 at isa? port 0x2e 193device wbsio1 at isa? port 0x4e 194device lm#3 at wbsio? 195 196# PCCARD (PCMCIA) support 197device pccard 198device cardbus 199device cbb 200 201# Serial (COM) ports 202device sio0 at isa? port IO_COM1 flags 0x10 irq 4 203device sio1 at isa? port IO_COM2 irq 3 204device sio2 at isa? disable port IO_COM3 irq 5 205device sio3 at isa? disable port IO_COM4 irq 9 206 207# Parallel port 208device ppc0 at isa? irq 7 209device ppbus # Parallel port bus (required) 210device lpt # Printer 211device plip # TCP/IP over parallel 212device ppi # Parallel port interface device 213#device vpo # Requires scbus and da 214 215 216# PCI Ethernet NICs. 217device de # DEC/Intel DC21x4x (``Tulip'') 218device txp # 3Com 3cR990 (``Typhoon'') 219device vx # 3Com 3c590, 3c595 (``Vortex'') 220 221device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'') 222 # Requires ig_hal 223device ig_hal # Intel PRO/1000 hardware abstraction layer 224 225# PCI Ethernet NICs that use the common MII bus controller code. 226# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! 227device miibus # MII bus support 228device ae # Attansic/Atheros L2 Fast Ethernet 229device age # Attansic/Atheros L1 Gigabit Ethernet 230device alc # Atheros AR8131/AR8132 231device ale # Atheros AR8121/AR8113/AR8114 232device bce # Broadcom NetXtreme II Gigabit Ethernet 233device bfe # Broadcom BCM440x 10/100 Ethernet 234device dc # DEC/Intel 21143 and various workalikes 235device et # Agere ET1310 10/100/1000 Ethernet 236device fxp # Intel EtherExpress PRO/100B (82557, 82558) 237device jme # JMicron Gigabit/Fast Ethernet 238device pcn # AMD Am79C97x PCI 10/100 NICs 239device rl # RealTek 8129/8139 240device re # RealTek 8139C+/8169 241device sf # Adaptec AIC-6915 (``Starfire'') 242device sis # Silicon Integrated Systems SiS 900/SiS 7016 243device sk # SysKonnect GEnesis, LinkSys EG1023, D-Link 244device ste # Sundance ST201 (D-Link DFE-550TX) 245device tl # Texas Instruments ThunderLAN 246device tx # SMC EtherPower II (83c170 ``EPIC'') 247device vge # VIA 612x GigE 248device vr # VIA Rhine, Rhine II 249device wb # Winbond W89C840F 250device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') 251device bge # Broadcom BCM570x (``Tigon III'') 252device stge # Sundance/Tamarack TC9021 Gigabit Ethernet 253device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet 254device nfe # NVIDIA nForce MCP 10/100/Gigabit Ethernet 255 256# ISA Ethernet NICs. 257# 'device ed' requires 'device miibus' 258device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000 259device ex 260# Xircom Ethernet 261device xe 262 263# Wireless NIC cards 264options IEEE80211_DEBUG #enable debugging msgs 265options IEEE80211_SUPPORT_MESH #enable 802.11s D3.0 support 266options IEEE80211_SUPPORT_TDMA #enable TDMA support 267device wlan # 802.11 support 268device wlan_ccmp # 802.11 CCMP support 269device wlan_tkip # 802.11 TKIP support 270device wlan_wep # 802.11 WEP support 271#device wlan_amrr # AMRR 272 273# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will 274# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP 275# mode (the factory default). If you set the switches on your ISA 276# card for a manually chosen I/O address and IRQ, you must specify 277# those parameters here. 278device an 279device ral # Ralink Technology 802.11 wireless NIC 280#device rtw # RealTek 802.11 wireless NIC 281# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really 282# exists only as a PCMCIA device, so there is no ISA attachment needed 283# and resources will always be dynamically assigned by the pccard code. 284device wi 285 286# The probe order of these is presently determined by i386/isa/isa_compat.c. 287#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000 288device lnc0 at isa? disable port 0x280 irq 10 drq 0 289device cs0 at isa? disable port 0x300 290device sn0 at isa? disable port 0x300 irq 10 291 292# Pseudo devices - the number indicates how many units to allocate. 293pseudo-device loop # Network loopback 294pseudo-device ether # Ethernet support 295pseudo-device sl 1 # Kernel SLIP 296pseudo-device ppp 1 # Kernel PPP 297pseudo-device tun # Packet tunnel. 298pseudo-device pty # Pseudo-ttys (telnet etc) 299pseudo-device md # Memory "disks" 300pseudo-device gif # IPv6 and IPv4 tunneling 301pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation) 302 303# The `bpf' pseudo-device enables the Berkeley Packet Filter. 304# Be aware of the administrative consequences of enabling this! 305pseudo-device bpf #Berkeley packet filter 306 307pseudo-device crypto # core crypto support, used by wlan 308 309# USB support 310device uhci # UHCI PCI->USB interface 311device ohci # OHCI PCI->USB interface 312device usb # USB Bus (required) 313device ugen # Generic 314device uhid # "Human Interface Devices" 315device ukbd # Keyboard 316device ulpt # Printer 317device umass # Disks/Mass storage - Requires scbus and da 318device ums # Mouse 319device uscanner # Scanners 320device urio # Diamond Rio MP3 Player 321# USB Ethernet, requires mii 322device aue # ADMtek USB ethernet 323device axe # ASIX Electronics USB Ethernet 324device cue # CATC USB ethernet 325device kue # Kawasaki LSI USB ethernet 326device rue # RealTek 8150 based USB ethernet 327# USB wireless NICs, requires wlan, wlan_amrr 328#device rum # Ralink Technology RT2501USB/RT2601USB 329#device ural # Ralink Technology RT2500USB 330 331# FireWire support 332device firewire # FireWire bus code 333device sbp # SCSI over FireWire (Requires scbus and da) 334device fwe # Ethernet over FireWire (non-standard!) 335